NED
/
tegrakernel
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
tegrakernel/kernel/nvidia/drivers/iio/pressure/nvi_bmpX80.c

2164 lines
48 KiB
C
Raw Permalink Normal View History

initial commit tegra kernel 32.6.1
2022-02-16 09:13:02 -06:00
/* Copyright (c) 2014-2018, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* Device mapping is done via three parameters:
* 1. If BMP_NVI_MPU_SUPPORT (defined below) is set, the code is included to
* support the device behind an Invensense MPU running an NVI (NVidia/
* Invensense) driver.
* If BMP_NVI_MPU_SUPPORT is 0 then this driver is only for the device in a
* stand-alone configuration without any dependancies on an Invensense MPU.
* 2. Device tree platform configuration nvi_config:
* - auto = automatically detect if connected to host or MPU
* - mpu = connected to MPU
* - host = connected to host
* This is only available if BMP_NVI_MPU_SUPPORT is set.
* 3. device in board file:
* - bmpX80 = automatically detect the device
* - force the device for:
* - bmp180
* - bmp280
* If you have no clue what the device is and don't know how it is
* connected then use auto and bmpX80. The auto-detect mechanisms are for
* platforms that have multiple possible configurations but takes longer to
* initialize. No device identification and connect testing is done for
* specific configurations.
*/
/* The NVS = NVidia Sensor framework */
/* NVI = NVidia/Invensense */
/* See Nvs.cpp in the HAL for the NVS implementation of batch/flush. */
/* See NvsIio.cpp in the HAL for the IIO enable/disable extension mechanism. */
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/regulator/consumer.h>
#include <linux/workqueue.h>
#include <linux/of.h>
#include <linux/nvs.h>
#ifndef BMP_NVI_MPU_SUPPORT
#define BMP_NVI_MPU_SUPPORT 0
#endif
#if BMP_NVI_MPU_SUPPORT
#include <linux/mpu_iio.h>
#endif /* BMP_NVI_MPU_SUPPORT */
#define BMP_DRIVER_VERSION (336)
#define BMP_VENDOR "Bosch"
#define BMP_NAME "bmpX80"
#define BMP180_NAME "bmp180"
#define BMP280_NAME "bmp280"
#define BMP_KBUF_SIZE (32)
#define BMP_PRES_MAX_RANGE_IVAL (1100)
#define BMP_PRES_MAX_RANGE_MICRO (0)
#define BMP_TEMP_MAX_RANGE_IVAL (125)
#define BMP_TEMP_MAX_RANGE_MICRO (0)
#define BMP_HW_DELAY_POR_MS (10)
#define BMP_POLL_DELAY_MS_DFLT (200)
#define BMP_MPU_RETRY_COUNT (50)
#define BMP_MPU_RETRY_DELAY_MS (20)
/* HW registers */
#define BMP_REG_ID (0xD0)
#define BMP_REG_ID_BMP180 (0x55)
#define BMP_REG_ID_BMP280 (0x56)
#define BMP_REG_RESET (0xE0)
#define BMP_REG_RESET_VAL (0xB6)
#define BMP_REG_CTRL (0xF4)
#define BMP_REG_CTRL_MODE_SLEEP (0)
#define BMP180_REG_CTRL_MODE_MASK (0x1F)
#define BMP180_REG_CTRL_MODE_PRES (0x34)
#define BMP180_REG_CTRL_MODE_TEMP (0x2E)
#define BMP180_REG_CTRL_SCO (5)
#define BMP180_REG_CTRL_OSS (6)
#define BMP280_REG_CTRL_MODE_MASK (0x03)
#define BMP280_REG_CTRL_MODE_FORCED1 (1)
#define BMP280_REG_CTRL_MODE_FORCED2 (2)
#define BMP280_REG_CTRL_MODE_NORMAL (3)
#define BMP280_REG_CTRL_OSRS_P (2)
#define BMP280_REG_CTRL_OSRS_T (5)
#define BMP180_REG_OUT_MSB (0xF6)
#define BMP180_REG_OUT_LSB (0xF7)
#define BMP180_REG_OUT_XLSB (0xF8)
#define BMP280_REG_STATUS (0xF3)
#define BMP280_REG_STATUS_MEASURING (3)
#define BMP280_REG_STATUS_IM_UPDATE (0)
#define BMP280_REG_CONFIG (0xF5)
#define BMP280_REG_CONFIG_T_SB (5)
#define BMP280_REG_PRESS_MSB (0xF7)
#define BMP280_REG_PRESS_LSB (0xF8)
#define BMP280_REG_PRESS_XLSB (0xF9)
#define BMP280_REG_TEMP_MSB (0xFA)
#define BMP280_REG_TEMP_LSB (0xFB)
#define BMP280_REG_TEMP_XLSB (0xFC)
/* ROM registers */
#define BMP180_REG_AC1 (0xAA)
#define BMP180_REG_AC2 (0xAC)
#define BMP180_REG_AC3 (0xAE)
#define BMP180_REG_AC4 (0xB0)
#define BMP180_REG_AC5 (0xB2)
#define BMP180_REG_AC6 (0xB4)
#define BMP180_REG_B1 (0xB6)
#define BMP180_REG_B2 (0xB8)
#define BMP180_REG_MB (0xBA)
#define BMP180_REG_MC (0xBC)
#define BMP180_REG_MD (0xBE)
#define BMP280_REG_CWORD00 (0x88)
#define BMP280_REG_CWORD01 (0x8A)
#define BMP280_REG_CWORD02 (0x8C)
#define BMP280_REG_CWORD03 (0x8E)
#define BMP280_REG_CWORD04 (0x90)
#define BMP280_REG_CWORD05 (0x92)
#define BMP280_REG_CWORD06 (0x94)
#define BMP280_REG_CWORD07 (0x96)
#define BMP280_REG_CWORD08 (0x98)
#define BMP280_REG_CWORD09 (0x9A)
#define BMP280_REG_CWORD10 (0x9C)
#define BMP280_REG_CWORD11 (0x9E)
#define BMP280_REG_CWORD12 (0xA0)
#define BATCH_DRY_RUN (0x1)
#define BATCH_WAKE_UPON_FIFO_FULL (0x2)
#define WR (0)
#define RD (1)
#define PORT_N (2)
/* _buf_push expects this scan order */
#define BMP_DEV_PRS (0)
#define BMP_DEV_TMP (1)
#define BMP_DEV_N (2)
/* regulator names in order of powering on */
static char *bmp_vregs[] = {
"vdd",
"vddio",
};
static char *bmp_configs[] = {
"auto",
"mpu",
"host",
};
static u8 bmp_ids[] = {
BMP_REG_ID_BMP180,
BMP_REG_ID_BMP280,
0x57,
0x58,
};
static unsigned short bmp_i2c_addrs[] = {
0x76,
0x77,
};
struct bmp_scale {
unsigned int delay_ms;
u8 os; /* oversampling */
struct nvs_float resolution;
struct nvs_float milliamp;
};
struct bmp_hal_dev {
int version;
unsigned int scale_n;
struct bmp_scale *scale;
struct nvs_float scale_float;
};
union bmp_rom {
struct bmp180_rom {
s16 ac1;
s16 ac2;
s16 ac3;
u16 ac4;
u16 ac5;
u16 ac6;
s16 b1;
s16 b2;
s16 mb;
s16 mc;
s16 md;
} bmp180;
struct bmp280_rom {
u16 dig_T1;
s16 dig_T2;
s16 dig_T3;
u16 dig_P1;
s16 dig_P2;
s16 dig_P3;
s16 dig_P4;
s16 dig_P5;
s16 dig_P6;
s16 dig_P7;
s16 dig_P8;
s16 dig_P9;
s16 reserved;
} bmp280;
} rom;
struct bmp_cmode {
unsigned int t_us;
u8 t_sb;
};
struct bmp_state {
struct i2c_client *i2c;
struct nvs_fn_if *nvs;
void *nvs_st[BMP_DEV_N];
struct sensor_cfg cfg[BMP_DEV_N];
struct regulator_bulk_data vreg[ARRAY_SIZE(bmp_vregs)];
struct workqueue_struct *wq;
struct work_struct ws;
struct bmp_hal *hal; /* Hardware Abstaction Layer */
union bmp_rom rom; /* calibration data */
unsigned int sts; /* status flags */
unsigned int errs; /* error count */
unsigned int enabled; /* enable status */
unsigned int period_us_min; /* minimum period from MPU */
unsigned int period_us; /* global sampling period */
unsigned int delay_us[BMP_DEV_N]; /* sampling delay */
unsigned int timeout_us[BMP_DEV_N]; /* batch timeout */
unsigned int scale_i; /* oversampling index */
unsigned int scale_user; /* user oversampling index */
unsigned int mpu_bypass_n; /* allow single bypass call */
unsigned int dmp_rd_len_sts; /* status length from DMP */
unsigned int dmp_rd_len_data; /* data length from DMP */
u16 i2c_addr; /* I2C address */
u8 dev_id; /* device ID */
bool initd; /* set if initialized */
bool cmode; /* mode normal (continuous) */
bool mpu_en; /* if device behind MPU */
bool port_en[PORT_N]; /* enable status of MPU write port */
int port_id[PORT_N]; /* MPU port ID */
u8 data_out; /* write value to mode register */
s32 ut; /* uncompensated temperature */
s32 up; /* uncompensated pressure */
s32 t_fine; /* temperature used in pressure calc */
s32 tmp; /* true temperature */
u32 prs; /* true pressure hPa/100 Pa/1 mBar */
u8 nvi_config; /* NVI configuration */
};
struct bmp_hal {
struct bmp_hal_dev *dev;
const char *part;
u8 rom_addr_start;
u8 rom_size;
bool rom_big_endian;
u8 mode_mask;
struct bmp_cmode *cmode_tbl;
int (*bmp_read)(struct bmp_state *st, s64 ts);
#if BMP_NVI_MPU_SUPPORT
unsigned int mpu_id;
u8 port_rd_reg;
u8 port_rd_ctrl;
void (*port_rd_handler)(u8 *data, unsigned int len,
long long timestamp, void *ext_driver);
#endif /* BMP_NVI_MPU_SUPPORT */
};
static void bmp_err(struct bmp_state *st)
{
st->errs++;
if (!st->errs)
st->errs--;
}
static int bmp_i2c_rd(struct bmp_state *st, u8 reg, u16 len, u8 *val)
{
struct i2c_msg msg[2];
msg[0].addr = st->i2c_addr;
msg[0].flags = 0;
msg[0].len = 1;
msg[0].buf = &reg;
msg[1].addr = st->i2c_addr;
msg[1].flags = I2C_M_RD;
msg[1].len = len;
msg[1].buf = val;
if (i2c_transfer(st->i2c->adapter, msg, 2) != 2) {
bmp_err(st);
return -EIO;
}
return 0;
}
static int bmp_i2c_wr(struct bmp_state *st, u8 reg, u8 val)
{
struct i2c_msg msg;
u8 buf[2];
if (st->i2c_addr) {
buf[0] = reg;
buf[1] = val;
msg.addr = st->i2c_addr;
msg.flags = 0;
msg.len = 2;
msg.buf = buf;
if (i2c_transfer(st->i2c->adapter, &msg, 1) != 1) {
bmp_err(st);
return -EIO;
}
}
return 0;
}
static int bmp_nvi_mpu_bypass_request(struct bmp_state *st)
{
int ret = 0;
#if BMP_NVI_MPU_SUPPORT
int i;
if (st->mpu_en) {
if (!st->mpu_bypass_n) {
for (i = 0; i < BMP_MPU_RETRY_COUNT; i++) {
ret = nvi_mpu_bypass_request(true);
if ((!ret) || (ret == -EPERM))
break;
msleep(BMP_MPU_RETRY_DELAY_MS);
}
if (ret) {
if (st->sts & NVS_STS_SPEW_MSG)
dev_err(&st->i2c->dev, "%s err=%d\n",
__func__, ret);
if (ret == -EPERM)
ret = 0;
} else {
st->mpu_bypass_n++;
if (st->sts & NVS_STS_SPEW_MSG)
dev_info(&st->i2c->dev, "%s\n",
__func__);
}
} else {
st->mpu_bypass_n++;
}
}
#endif /* BMP_NVI_MPU_SUPPORT */
return ret;
}
static int bmp_nvi_mpu_bypass_release(struct bmp_state *st)
{
int ret = 0;
#if BMP_NVI_MPU_SUPPORT
if (st->mpu_en) {
if (st->mpu_bypass_n == 1) {
ret = nvi_mpu_bypass_release();
if (ret) {
if (st->sts & NVS_STS_SPEW_MSG)
dev_err(&st->i2c->dev, "%s err=%d\n",
__func__, ret);
} else {
st->mpu_bypass_n--;
if (st->sts & NVS_STS_SPEW_MSG)
dev_info(&st->i2c->dev, "%s\n",
__func__);
}
} else {
st->mpu_bypass_n--;
}
}
#endif /* BMP_NVI_MPU_SUPPORT */
return ret;
}
static int bmp_mode_wr(struct bmp_state *st, u8 mode)
{
int ret;
#if BMP_NVI_MPU_SUPPORT
if (st->mpu_en && !st->cmode) {
ret = nvi_mpu_data_out(st->port_id[WR], mode);
} else {
ret = bmp_nvi_mpu_bypass_request(st);
if (!ret) {
if (st->cmode) {
ret = bmp_i2c_wr(st, BMP_REG_CTRL,
BMP_REG_CTRL_MODE_SLEEP);
if (mode & st->hal->mode_mask) {
udelay(BMP_HW_DELAY_POR_MS);
ret |= bmp_i2c_wr(st, BMP_REG_CTRL,
mode);
}
} else {
ret = bmp_i2c_wr(st, BMP_REG_CTRL, mode);
}
if (st->sts & NVS_STS_SPEW_MSG)
dev_info(&st->i2c->dev, "%s mode=%x err=%d\n",
__func__, mode, ret);
bmp_nvi_mpu_bypass_release(st);
}
}
#else /* BMP_NVI_MPU_SUPPORT */
ret = bmp_i2c_wr(st, BMP_REG_CTRL, mode);
if (st->sts & NVS_STS_SPEW_MSG)
dev_info(&st->i2c->dev, "%s mode=%x err=%d\n",
__func__, mode, ret);
#endif /* BMP_NVI_MPU_SUPPORT */
if (!ret)
st->data_out = mode;
return ret;
}
static int bmp_pm(struct bmp_state *st, bool enable)
{
int ret = 0;
if (enable) {
ret = nvs_vregs_enable(&st->i2c->dev, st->vreg,
ARRAY_SIZE(bmp_vregs));
if (ret)
mdelay(BMP_HW_DELAY_POR_MS);
} else {
if (st->cmode) {
ret = nvs_vregs_sts(st->vreg, ARRAY_SIZE(bmp_vregs));
if ((ret < 0) || (ret == ARRAY_SIZE(bmp_vregs))) {
ret = bmp_mode_wr(st, BMP_REG_CTRL_MODE_SLEEP);
} else if (ret > 0) {
nvs_vregs_enable(&st->i2c->dev, st->vreg,
ARRAY_SIZE(bmp_vregs));
mdelay(BMP_HW_DELAY_POR_MS);
ret = bmp_mode_wr(st, BMP_REG_CTRL_MODE_SLEEP);
}
}
ret |= nvs_vregs_disable(&st->i2c->dev, st->vreg,
ARRAY_SIZE(bmp_vregs));
}
if (ret > 0)
ret = 0;
if (ret) {
dev_err(&st->i2c->dev, "%s pwr=%x ERR=%d\n",
__func__, enable, ret);
} else {
if (st->sts & NVS_STS_SPEW_MSG)
dev_info(&st->i2c->dev, "%s pwr=%x\n",
__func__, enable);
}
return ret;
}
#if BMP_NVI_MPU_SUPPORT
static int bmp_port_free(struct bmp_state *st, int port)
{
int ret = 0;
if (st->port_id[port] >= 0) {
ret = nvi_mpu_port_free(st->port_id[port]);
if (!ret)
st->port_id[port] = -1;
}
return ret;
}
static int bmp_ports_free(struct bmp_state *st)
{
int ret;
ret = bmp_port_free(st, WR);
ret |= bmp_port_free(st, RD);
return ret;
}
#endif /* BMP_NVI_MPU_SUPPORT */
static void bmp_pm_exit(struct bmp_state *st)
{
#if BMP_NVI_MPU_SUPPORT
bmp_ports_free(st);
#endif /* BMP_NVI_MPU_SUPPORT */
bmp_pm(st, false);
nvs_vregs_exit(&st->i2c->dev, st->vreg, ARRAY_SIZE(bmp_vregs));
}
static int bmp_pm_init(struct bmp_state *st)
{
int ret;
st->delay_us[BMP_DEV_PRS] = (BMP_POLL_DELAY_MS_DFLT * 1000);
st->delay_us[BMP_DEV_TMP] = (BMP_POLL_DELAY_MS_DFLT * 1000);
st->period_us = (BMP_POLL_DELAY_MS_DFLT * 1000);
st->port_id[WR] = -1;
st->port_id[RD] = -1;
nvs_vregs_init(&st->i2c->dev,
st->vreg, ARRAY_SIZE(bmp_vregs), bmp_vregs);
ret = bmp_pm(st, true);
return ret;
}
#if BMP_NVI_MPU_SUPPORT
static int bmp_ports_enable(struct bmp_state *st, bool enable)
{
int ret = 0;
unsigned int port_mask = 0;
unsigned int i;
for (i = 0; i < PORT_N; i++) {
if (enable != st->port_en[i] && st->port_id[i] >= 0)
port_mask |= (1 << st->port_id[i]);
}
if (port_mask) {
ret = nvi_mpu_enable(port_mask, enable);
if (!ret) {
for (i = 0; i < PORT_N; i++) {
if (st->port_id[i] >= 0 &&
port_mask & (1 << st->port_id[i]))
st->port_en[i] = enable;
}
}
}
return ret;
}
#endif /* BMP_NVI_MPU_SUPPORT */
static int bmp_wr(struct bmp_state *st, u8 reg, u8 val)
{
int ret = 0;
ret = bmp_nvi_mpu_bypass_request(st);
if (!ret) {
ret = bmp_i2c_wr(st, reg, val);
bmp_nvi_mpu_bypass_release(st);
}
return ret;
}
static unsigned int bmp_cmode_t(struct bmp_state *st, u8 *t_sb,
unsigned int period_us, unsigned int scale_i)
{
unsigned int us = 0;
unsigned int i = 0;
while (st->hal->cmode_tbl[i].t_us) {
*t_sb = st->hal->cmode_tbl[i].t_sb;
us = st->hal->cmode_tbl[i].t_us;
us += st->hal->dev[BMP_DEV_PRS].scale[scale_i].delay_ms * 1000;
if (period_us >= us)
return us;
i++;
if ((!st->mpu_en) && st->hal->cmode_tbl[i].t_us) {
us -= st->hal->cmode_tbl[i].t_us;
us >>= 1;
us += st->hal->cmode_tbl[i].t_us;
us += st->hal->dev[BMP_DEV_PRS].scale[scale_i].
delay_ms * 1000;
if (period_us > us)
return us;
}
}
return us;
}
static int bmp_mode(struct bmp_state *st, unsigned int period_us,
unsigned int scale_user, unsigned int enable)
{
u8 mode;
u8 t_sb;
unsigned int i;
unsigned int scale_i;
unsigned int us = 0;
int ret = 0;
i = BMP_DEV_PRS;
if (st->cmode) {
if (scale_user) {
/* static scale mode */
scale_i = scale_user - 1;
us = bmp_cmode_t(st, &t_sb, period_us, scale_i);
} else {
/* auto scale mode - matching scale to the period */
scale_i = 0;
for (; scale_i < st->hal->dev[i].scale_n; scale_i++) {
us = bmp_cmode_t(st, &t_sb,
period_us, scale_i);
if (period_us >= us)
/* HW (us) is fast enough */
break;
}
if (scale_i >= st->hal->dev[i].scale_n)
scale_i = st->hal->dev[i].scale_n - 1;
}
if (period_us < us)
period_us = us;
mode = BMP280_REG_CTRL_MODE_NORMAL;
mode |= st->hal->dev[BMP_DEV_TMP].scale[scale_i].os <<
BMP280_REG_CTRL_OSRS_T;
if (enable & (1 << BMP_DEV_PRS))
mode |= st->hal->dev[BMP_DEV_PRS].scale[scale_i].os <<
BMP280_REG_CTRL_OSRS_P;
/* else presure will be disabled */
t_sb <<= BMP280_REG_CONFIG_T_SB;
ret = bmp_nvi_mpu_bypass_request(st);
if (!ret) {
ret = bmp_wr(st, BMP280_REG_CONFIG, t_sb);
if (ret)
mode = BMP_REG_CTRL_MODE_SLEEP;
if (st->sts & NVS_STS_SPEW_MSG)
dev_info(&st->i2c->dev, "%s cfg=%x err=%d\n",
__func__, t_sb, ret);
ret |= bmp_mode_wr(st, mode);
bmp_nvi_mpu_bypass_release(st);
}
} else {
if (scale_user) {
scale_i = scale_user - 1;
us = st->hal->dev[i].scale[scale_i].delay_ms * 1000;
} else {
/* scale is automatic based on period */
scale_i = 0;
for (; scale_i < st->hal->dev[i].scale_n; scale_i++) {
us = st->hal->dev[i].scale[scale_i].delay_ms;
us *= 1000;
if (period_us >= us)
/* HW (us) is fast enough */
break;
}
if (scale_i >= st->hal->dev[i].scale_n)
scale_i = st->hal->dev[i].scale_n - 1;
}
if (period_us < us)
period_us = us;
#if BMP_NVI_MPU_SUPPORT
if (scale_i != st->scale_i && st->mpu_en &&
st->port_id[WR] >= 0)
ret = nvi_mpu_delay_ms(st->port_id[WR],
st->hal->dev[i].scale[scale_i].delay_ms);
#endif /* BMP_NVI_MPU_SUPPORT */
if (st->dev_id == BMP_REG_ID_BMP180) {
mode = st->hal->dev[i].scale[scale_i].os <<
BMP180_REG_CTRL_OSS;
mode |= BMP180_REG_CTRL_MODE_TEMP;
} else {
mode = BMP280_REG_CTRL_MODE_FORCED1;
mode |= st->hal->dev[BMP_DEV_TMP].scale[scale_i].os <<
BMP280_REG_CTRL_OSRS_T;
if (enable & (1 << BMP_DEV_PRS))
mode |= st->hal->dev[i].scale[scale_i].os <<
BMP280_REG_CTRL_OSRS_P;
}
ret |= bmp_mode_wr(st, mode);
}
if (!ret) {
if (period_us != st->period_us) {
if (st->sts & NVS_STS_SPEW_MSG)
dev_info(&st->i2c->dev, "%s: period_us=%u\n",
__func__, period_us);
#if BMP_NVI_MPU_SUPPORT
if (st->mpu_en) {
us = -1;
for (i = 0; i < BMP_DEV_N; i++) {
if ((enable & (1 << i)) &&
st->timeout_us[i] < us)
us = st->timeout_us[i];
}
ret = nvi_mpu_batch(st->port_id[RD],
period_us, us);
}
if (!ret)
#endif /* BMP_NVI_MPU_SUPPORT */
st->period_us = period_us;
}
if (!ret)
st->scale_i = scale_i;
}
return ret;
}
static void bmp_calc_180(struct bmp_state *st)
{
long X1, X2, X3, B3, B5, B6, p;
unsigned long B4, B7;
long pressure;
u8 oss = st->hal->dev[BMP_DEV_PRS].scale[st->scale_i].os;
X1 = ((st->ut - st->rom.bmp180.ac6) * st->rom.bmp180.ac5) >> 15;
X2 = st->rom.bmp180.mc * (1 << 11) / (X1 + st->rom.bmp180.md);
B5 = X1 + X2;
st->tmp = (B5 + 8) >> 4;
B6 = B5 - 4000;
X1 = (st->rom.bmp180.b2 * ((B6 * B6) >> 12)) >> 11;
X2 = (st->rom.bmp180.ac2 * B6) >> 11;
X3 = X1 + X2;
B3 = ((((st->rom.bmp180.ac1 << 2) + X3) << oss) + 2) >> 2;
X1 = (st->rom.bmp180.ac3 * B6) >> 13;
X2 = (st->rom.bmp180.b1 * ((B6 * B6) >> 12)) >> 16;
X3 = ((X1 + X2) + 2) >> 2;
B4 = (st->rom.bmp180.ac4 * (unsigned long)(X3 + 32768)) >> 15;
B7 = ((unsigned long)st->up - B3) * (50000 >> oss);
if (B7 < 0x80000000)
p = (B7 << 1) / B4;
else
p = (B7 / B4) << 1;
X1 = (p >> 8) * (p >> 8);
X1 = (X1 * 3038) >> 16;
X2 = (-7357 * p) >> 16;
pressure = p + ((X1 + X2 + 3791) >> 4);
st->prs = (int)pressure;
}
static int bmp_read_sts_180(struct bmp_state *st, u8 *data, s64 ts)
{
u8 oss;
s32 val;
int ret = 0;
/* BMP180_REG_CTRL_SCO is 0 when data is ready */
if (!(data[0] & (1 << BMP180_REG_CTRL_SCO))) {
oss = st->hal->dev[BMP_DEV_PRS].scale[st->scale_i].os;
ret = -1;
if (data[0] == 0x0A) { /* temperature */
st->ut = ((data[2] << 8) + data[3]);
st->data_out = BMP180_REG_CTRL_MODE_PRES |
(oss << BMP180_REG_CTRL_OSS);
} else { /* pressure */
val = ((data[2] << 16) + (data[3] << 8) + data[4]);
val >>= (8 - oss);
st->data_out = BMP180_REG_CTRL_MODE_TEMP;
st->up = val;
bmp_calc_180(st);
ret = 1;
}
}
return ret;
}
static int bmp_read_180(struct bmp_state *st, s64 ts)
{
u8 data[5];
int ret;
ret = bmp_i2c_rd(st, BMP_REG_CTRL, 5, data);
if (ret)
return ret;
ret = bmp_read_sts_180(st, data, ts);
if (ret > 0) {
if (st->enabled & (1 << BMP_DEV_PRS))
st->nvs->handler(st->nvs_st[BMP_DEV_PRS],
&st->prs, ts);
if (st->enabled & (1 << BMP_DEV_TMP))
/* nvs handles on-change sensor timing & same values */
st->nvs->handler(st->nvs_st[BMP_DEV_TMP],
&st->tmp, ts);
bmp_i2c_wr(st, BMP_REG_CTRL, st->data_out);
} else if (ret < 0) {
bmp_i2c_wr(st, BMP_REG_CTRL, st->data_out);
}
return 0;
}
static void bmp_calc_temp_280(struct bmp_state *st)
{
s32 var1;
s32 var2;
var1 = st->ut;
var1 >>= 3;
var2 = st->rom.bmp280.dig_T1;
var2 <<= 1;
var1 -= var2;
var1 *= st->rom.bmp280.dig_T2;
var1 >>= 11;
var2 = st->ut;
var2 >>= 4;
var2 -= (s32)st->rom.bmp280.dig_T1;
var2 *= var2;
var2 >>= 12;
var2 *= st->rom.bmp280.dig_T3;
var2 >>= 14;
st->t_fine = var1 + var2;
st->tmp = (st->t_fine * 5 + 128) >> 8;
}
static int bmp_calc_pres_280(struct bmp_state *st)
{
s64 var1;
s64 var2;
s64 var3;
s64 p;
var1 = st->t_fine;
var1 -= 128000;
var2 = var1 * var1;
var2 *= st->rom.bmp280.dig_P6;
var3 = st->rom.bmp280.dig_P5;
var3 *= var1;
var3 <<= 17;
var2 += var3;
var3 = st->rom.bmp280.dig_P4;
var3 <<= 35;
var2 += var3;
var3 = var1;
var3 *= st->rom.bmp280.dig_P2;
var3 <<= 12;
var1 *= var1;
var1 *= st->rom.bmp280.dig_P3;
var1 >>= 8;
var1 += var3;
var3 = 1;
var3 <<= 47;
var1 += var3;
var1 *= st->rom.bmp280.dig_P1;
var1 >>= 33;
if (!var1)
return -1;
p = 1048576 - st->up;
p <<= 31;
p -= var2;
p *= 3125;
p = div64_s64(p, var1);
var1 = p;
var1 >>= 13;
var1 *= var1;
var1 *= st->rom.bmp280.dig_P9;
var1 >>= 25;
var2 = st->rom.bmp280.dig_P8;
var2 *= p;
var2 >>= 19;
var3 = st->rom.bmp280.dig_P7;
var3 <<= 4;
p += var1;
p += var2;
p >>= 8;
p += var3;
p >>= 8;
st->prs = (u32)p;
return 1;
}
static int bmp_push_280(struct bmp_state *st, u8 *data, s64 ts)
{
s32 val;
int ret;
val = (data[0] << 16) | (data[1] << 8) | data[2];
val = le32_to_cpup(&val);
val >>= 4;
st->up = val;
val = (data[3] << 16) | (data[4] << 8) | data[5];
val = le32_to_cpup(&val);
val >>= 4;
st->ut = val;
bmp_calc_temp_280(st);
if (st->enabled & (1 << BMP_DEV_PRS)) {
ret = bmp_calc_pres_280(st);
if (ret > 0)
st->nvs->handler(st->nvs_st[BMP_DEV_PRS],
&st->prs, ts);
} else {
ret = 1;
}
if (st->enabled & (1 << BMP_DEV_TMP))
/* nvs handles on-change sensor timing & same values */
st->nvs->handler(st->nvs_st[BMP_DEV_TMP], &st->tmp, ts);
return ret;
}
static int bmp_read_sts_280(struct bmp_state *st, u8 *data)
{
if (data[0] & (1 << BMP280_REG_STATUS_IM_UPDATE))
/* registers are updating */
return 0;
return 1;
}
static int bmp_read_280(struct bmp_state *st, s64 ts)
{
u8 data[10];
int ret;
ret = bmp_i2c_rd(st, BMP280_REG_STATUS, 10, data);
if (ret)
return ret;
ret = bmp_read_sts_280(st, data);
if (ret > 0) {
ret = bmp_push_280(st, &data[4], ts);
if (ret > 0)
bmp_i2c_wr(st, BMP_REG_CTRL, st->data_out);
}
return 0;
}
#if BMP_NVI_MPU_SUPPORT
static void bmp_mpu_handler_280(u8 *data, unsigned int len, s64 ts, void *p_val)
{
struct bmp_state *st = (struct bmp_state *)p_val;
unsigned int i;
int ret;
if (ts < 0 || !data)
/* error - just drop */
return;
if (!ts) {
/* no timestamp means flush done */
for (i = 0; i < BMP_DEV_N; i++) {
if (st->nvs_st[i])
st->nvs->handler(st->nvs_st[i], NULL, 0);
}
return;
}
if (st->enabled) {
if (len == st->dmp_rd_len_sts)
/* status data from the DMP not supported */
return;
if (len == st->dmp_rd_len_data) {
/* this data is from the DMP */
i = 0;
ret = 1;
} else {
i = 4;
ret = bmp_read_sts_280(st, data);
}
if (ret > 0)
bmp_push_280(st, &data[i], ts);
}
}
static void bmp_mpu_handler_180(u8 *data, unsigned int len, s64 ts, void *p_val)
{
struct bmp_state *st = (struct bmp_state *)p_val;
unsigned int i;
int ret;
if (ts < 0)
/* error - just drop */
return;
if (!ts) {
/* no timestamp means flush done */
for (i = 0; i < BMP_DEV_N; i++) {
if (st->nvs_st[i])
st->nvs->handler(st->nvs_st[i], NULL, 0);
}
return;
}
ret = bmp_read_sts_180(st, data, ts);
if (ret > 0) {
if (st->enabled & (1 << BMP_DEV_PRS))
st->nvs->handler(st->nvs_st[BMP_DEV_PRS],
&st->prs, ts);
if (st->enabled & (1 << BMP_DEV_TMP))
/* nvs handles on-change sensor timing & same values */
st->nvs->handler(st->nvs_st[BMP_DEV_TMP],
&st->tmp, ts);
nvi_mpu_data_out(st->port_id[WR], st->data_out);
} else if (ret < 0) {
nvi_mpu_data_out(st->port_id[WR], st->data_out);
}
}
#endif /* BMP_NVI_MPU_SUPPORT */
static void bmp_work(struct work_struct *ws)
{
struct bmp_state *st = container_of((struct work_struct *)ws,
struct bmp_state, ws);
s64 ts1;
s64 ts2;
unsigned int ts_diff;
unsigned int i;
unsigned long delay_us;
while (1) {
for (i = 0; i < BMP_DEV_N; i++)
st->nvs->nvs_mutex_lock(st->nvs_st[i]);
if (st->enabled) {
ts1 = nvs_timestamp();
st->hal->bmp_read(st, ts1);
ts2 = nvs_timestamp();
ts_diff = (ts2 - ts1) / 1000; /* ns => us */
if (st->period_us > ts_diff)
delay_us = st->period_us - ts_diff;
else
delay_us = 0;
for (i = 0; i < BMP_DEV_N; i++)
st->nvs->nvs_mutex_unlock(st->nvs_st[i]);
} else {
for (i = 0; i < BMP_DEV_N; i++)
st->nvs->nvs_mutex_unlock(st->nvs_st[i]);
break;
}
if (delay_us) {
if (st->period_us <= st->cfg[BMP_DEV_PRS].thresh_lo)
usleep_range(delay_us, delay_us);
else
usleep_range(delay_us, st->period_us);
}
}
}
static unsigned int bmp_poll_delay(struct bmp_state *st, unsigned int en_msk)
{
unsigned int i;
unsigned int delay_us = -1;
bool valid = false;
for (i = 0; i < BMP_DEV_N; i++) {
if (en_msk & (1 << i)) {
if (st->delay_us[i] && st->delay_us[i] < delay_us) {
delay_us = st->delay_us[i];
valid = true;
}
}
}
if (!valid)
delay_us = (BMP_POLL_DELAY_MS_DFLT * 1000);
return delay_us;
}
static int bmp_init_hw(struct bmp_state *st)
{
u8 *p_rom8;
u16 *p_rom16;
int i;
int ret = 0;
st->ut = 0;
st->up = 0;
st->tmp = 0;
st->prs = 0;
p_rom8 = (u8 *)&st->rom;
ret = bmp_nvi_mpu_bypass_request(st);
if (!ret) {
ret = bmp_i2c_rd(st, st->hal->rom_addr_start,
st->hal->rom_size, p_rom8);
bmp_nvi_mpu_bypass_release(st);
}
if (ret)
return ret;
p_rom16 = (u16 *)&st->rom;
for (i = 0; i < (st->hal->rom_size >> 1); i++) {
if (st->hal->rom_big_endian)
*p_rom16 = be16_to_cpup(p_rom16);
else
*p_rom16 = le16_to_cpup(p_rom16);
p_rom16++;
}
st->initd = true;
return ret;
}
static int bmp_dis(struct bmp_state *st)
{
#if BMP_NVI_MPU_SUPPORT
int ret = 0;
if (st->mpu_en)
ret = bmp_ports_enable(st, false);
if (!ret)
st->enabled = 0;
return ret;
#else /* BMP_NVI_MPU_SUPPORT */
st->enabled = 0;
return 0;
#endif /* BMP_NVI_MPU_SUPPORT */
}
static int bmp_disable(struct bmp_state *st, int snsr_id)
{
bool disable = true;
int ret = 0;
if (snsr_id >= 0) {
if (st->enabled & ~(1 << snsr_id)) {
st->enabled &= ~(1 << snsr_id);
disable = false;
}
}
if (disable) {
ret = bmp_dis(st);
if (!ret)
bmp_pm(st, false);
}
return ret;
}
static int bmp_en(struct bmp_state *st)
{
int ret = 0;
bmp_pm(st, true);
if (!st->initd)
ret = bmp_init_hw(st);
return ret;
}
static int bmp_enable(void *client, int snsr_id, int enable)
{
struct bmp_state *st = (struct bmp_state *)client;
int ret;
if (enable < 0)
return st->enabled & (1 << snsr_id);
if (enable) {
enable = st->enabled | (1 << snsr_id);
ret = bmp_en(st);
if (!ret) {
ret = bmp_mode(st, bmp_poll_delay(st, enable),
st->scale_user, enable);
#if BMP_NVI_MPU_SUPPORT
if (st->mpu_en)
ret |= bmp_ports_enable(st, true);
#endif /* BMP_NVI_MPU_SUPPORT */
if (ret) {
bmp_disable(st, snsr_id);
} else {
st->enabled = enable;
if (!st->mpu_en) {
cancel_work_sync(&st->ws);
queue_work(st->wq, &st->ws);
}
}
}
} else {
ret = bmp_disable(st, snsr_id);
}
return ret;
}
static int bmp_batch(void *client, int snsr_id, int flags,
unsigned int period, unsigned int timeout)
{
struct bmp_state *st = (struct bmp_state *)client;
int ret = 0;
unsigned int old_period;
unsigned int old_timeout;
if (timeout && !st->mpu_en)
/* timeout not supported (no HW FIFO) */
return -EINVAL;
old_period = st->delay_us[snsr_id];
old_timeout = st->timeout_us[snsr_id];
st->delay_us[snsr_id] = period;
st->timeout_us[snsr_id] = timeout;
if (st->enabled) {
ret = bmp_mode(st, bmp_poll_delay(st, st->enabled),
st->scale_user, st->enabled);
if (ret) {
st->delay_us[snsr_id] = old_period;
st->timeout_us[snsr_id] = old_timeout;
}
}
return ret;
}
static int bmp_batch_read(void *client, int snsr_id,
unsigned int *period_us, unsigned int *timeout_us)
{
struct bmp_state *st = (struct bmp_state *)client;
int ret = 0;
if (period_us)
*period_us = st->period_us;
if (timeout_us)
*timeout_us = 0;
#if BMP_NVI_MPU_SUPPORT
if (st->mpu_en)
ret = nvi_mpu_batch_read(st->port_id[RD],
period_us, timeout_us);
#endif /* BMP_NVI_MPU_SUPPORT */
return ret;
}
static int bmp_flush(void *client, int snsr_id)
{
int ret = -EINVAL;
#if BMP_NVI_MPU_SUPPORT
struct bmp_state *st = (struct bmp_state *)client;
if (st->mpu_en)
ret = nvi_mpu_flush(st->port_id[RD]);
#endif /* BMP_NVI_MPU_SUPPORT */
return ret;
}
static int bmp_resolution(void *client, int snsr_id, int resolution)
{
struct bmp_state *st = (struct bmp_state *)client;
unsigned int us;
unsigned int i;
int ret;
if (snsr_id != BMP_DEV_PRS)
return -EINVAL;
if (resolution < 0)
resolution = 0;
if (resolution > st->hal->dev[BMP_DEV_PRS].scale_n)
resolution = st->hal->dev[BMP_DEV_PRS].scale_n;
if (st->enabled) {
ret = bmp_mode(st, st->period_us, resolution, st->enabled);
if (ret)
return ret;
} else {
if (resolution)
st->scale_i = resolution - 1;
else
st->scale_i = 0;
}
st->scale_user = resolution;
for (i = 0; i < BMP_DEV_N; i++) {
st->cfg[i].resolution.ival =
st->hal->dev[i].scale[st->scale_i].resolution.ival;
st->cfg[i].resolution.fval =
st->hal->dev[i].scale[st->scale_i].resolution.fval;
st->cfg[i].milliamp.ival =
st->hal->dev[i].scale[st->scale_i].milliamp.ival;
st->cfg[i].milliamp.fval =
st->hal->dev[i].scale[st->scale_i].milliamp.fval;
us = st->hal->dev[i].scale[st->scale_i].delay_ms * 1000;
if (us < st->period_us_min)
us = st->period_us_min;
st->cfg[i].delay_us_min = us;
}
return 0;
}
static int bmp_reset(void *client, int snsr_id)
{
struct bmp_state *st = (struct bmp_state *)client;
unsigned int enabled = st->enabled;
unsigned int i;
int ret;
bmp_dis(st);
bmp_en(st);
ret = bmp_wr(st, BMP_REG_RESET, BMP_REG_RESET_VAL);
if (!ret)
mdelay(BMP_HW_DELAY_POR_MS);
for (i = 0; i < BMP_DEV_N; i++)
bmp_enable(st, i, enabled & (1 << i));
return ret;
}
static int bmp_regs(void *client, int snsr_id, char *buf)
{
struct bmp_state *st = (struct bmp_state *)client;
ssize_t t;
u8 data[11];
u16 *cal;
unsigned int i;
int ret;
if (!st->initd) {
t = snprintf(buf, PAGE_SIZE, "calibration: NEED ENABLE\n");
} else {
t = snprintf(buf, PAGE_SIZE, "calibration:\n");
cal = &st->rom.bmp280.dig_T1;
for (i = 0; i < st->hal->rom_size; i = i + 2)
t += snprintf(buf + t, PAGE_SIZE - t, "%#2x=%#2x\n",
st->hal->rom_addr_start + i, *cal++);
}
ret = bmp_nvi_mpu_bypass_request(st);
if (!ret) {
ret = bmp_i2c_rd(st, BMP_REG_ID, 1, data);
ret |= bmp_i2c_rd(st, BMP280_REG_STATUS,
10, &data[1]);
bmp_nvi_mpu_bypass_release(st);
}
if (ret) {
t += snprintf(buf + t, PAGE_SIZE - t,
"registers: ERR %d\n", ret);
} else {
t += snprintf(buf + t, PAGE_SIZE - t, "registers:\n");
t += snprintf(buf + t, PAGE_SIZE - t, "%#2x=%#2x\n",
BMP_REG_ID, data[0]);
for (i = 0; i < 10; i++)
t += snprintf(buf + t, PAGE_SIZE - t, "%#2x=%#2x\n",
BMP280_REG_STATUS + i, data[i + 1]);
}
return t;
}
static int bmp_nvs_read(void *client, int snsr_id, char *buf)
{
struct bmp_state *st = (struct bmp_state *)client;
ssize_t t;
t = snprintf(buf, PAGE_SIZE, "driver v.%u\n", BMP_DRIVER_VERSION);
t += snprintf(buf + t, PAGE_SIZE - t, "mpu_en=%x\n", st->mpu_en);
t += snprintf(buf + t, PAGE_SIZE - t, "nvi_config=%hhu\n",
st->nvi_config);
t += snprintf(buf + t, PAGE_SIZE - t, "cmode_enable=%x\n", st->cmode);
if (!st->scale_user)
t += snprintf(buf + t, PAGE_SIZE - t, "scale_user=auto\n");
t += snprintf(buf + t, PAGE_SIZE - t, "scale_i=%x\n", st->scale_i);
return t;
}
static struct nvs_fn_dev bmp_fn_dev = {
.enable = bmp_enable,
.batch = bmp_batch,
.batch_read = bmp_batch_read,
.flush = bmp_flush,
.resolution = bmp_resolution,
.reset = bmp_reset,
.regs = bmp_regs,
.nvs_read = bmp_nvs_read,
};
#ifdef CONFIG_PM_SLEEP
static int bmp_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bmp_state *st = i2c_get_clientdata(client);
unsigned int i;
int ret = 0;
st->sts |= NVS_STS_SUSPEND;
for (i = 0; i < BMP_DEV_N; i++) {
if (st->nvs && st->nvs_st[i])
ret |= st->nvs->suspend(st->nvs_st[i]);
}
if (st->sts & NVS_STS_SPEW_MSG)
dev_info(&client->dev, "%s\n", __func__);
return ret;
}
static int bmp_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bmp_state *st = i2c_get_clientdata(client);
unsigned int i;
int ret = 0;
for (i = 0; i < BMP_DEV_N; i++) {
if (st->nvs && st->nvs_st[i])
ret |= st->nvs->resume(st->nvs_st[i]);
}
st->sts &= ~NVS_STS_SUSPEND;
if (st->sts & NVS_STS_SPEW_MSG)
dev_info(&client->dev, "%s\n", __func__);
return ret;
}
#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(bmp_pm_ops, bmp_suspend, bmp_resume);
static void bmp_shutdown(struct i2c_client *client)
{
struct bmp_state *st = i2c_get_clientdata(client);
unsigned int i;
st->sts |= NVS_STS_SHUTDOWN;
for (i = 0; i < BMP_DEV_N; i++) {
if (st->nvs && st->nvs_st[i])
st->nvs->shutdown(st->nvs_st[i]);
}
if (st->sts & NVS_STS_SPEW_MSG)
dev_info(&client->dev, "%s\n", __func__);
}
static int bmp_remove(struct i2c_client *client)
{
struct bmp_state *st = i2c_get_clientdata(client);
unsigned int i;
if (st != NULL) {
bmp_shutdown(client);
if (st->nvs) {
for (i = 0; i < BMP_DEV_N; i++) {
if (st->nvs_st[i]) {
st->nvs->remove(st->nvs_st[i]);
st->nvs_st[i] = NULL;
}
}
}
bmp_pm_exit(st);
if (st->wq) {
destroy_workqueue(st->wq);
st->wq = NULL;
}
}
dev_info(&client->dev, "%s\n", __func__);
return 0;
}
struct sensor_cfg bmp_cfg_dflt[] = {
{
.name = "pressure",
.snsr_id = BMP_DEV_PRS,
.kbuf_sz = BMP_KBUF_SIZE,
.ch_n = 1,
.ch_sz = -4,
.part = BMP_NAME,
.vendor = BMP_VENDOR,
.version = 0,
.max_range = {
.ival = BMP_PRES_MAX_RANGE_IVAL,
.fval = BMP_PRES_MAX_RANGE_MICRO,
},
},
{
.name = "ambient_temperature",
.snsr_id = BMP_DEV_TMP,
.ch_n = 1,
.ch_sz = -4,
.part = BMP_NAME,
.vendor = BMP_VENDOR,
.version = 0,
.max_range = {
.ival = BMP_TEMP_MAX_RANGE_IVAL,
.fval = BMP_TEMP_MAX_RANGE_MICRO,
},
.flags = SENSOR_FLAG_ON_CHANGE_MODE,
},
};
static struct bmp_scale bmp_scale_prs_180[] = {
{
.delay_ms = 26,
.os = 0x03,
.resolution = {
.ival = 0,
.fval = 10000,
},
.milliamp = {
.ival = 0,
.fval = 12000,
},
},
{
.delay_ms = 14,
.os = 0x02,
.resolution = {
.ival = 0,
.fval = 10000,
},
.milliamp = {
.ival = 0,
.fval = 7000,
},
},
{
.delay_ms = 8,
.os = 0x01,
.resolution = {
.ival = 0,
.fval = 10000,
},
.milliamp = {
.ival = 0,
.fval = 5000,
},
},
{
.delay_ms = 5,
.os = 0x00,
.resolution = {
.ival = 0,
.fval = 10000,
},
.milliamp = {
.ival = 0,
.fval = 3000,
},
},
};
static struct bmp_scale bmp_scale_tmp_180[] = {
{
.delay_ms = 26,
.resolution = {
.ival = 0,
.fval = 100000,
},
.milliamp = {
.ival = 0,
.fval = 12000,
},
},
{
.delay_ms = 14,
.resolution = {
.ival = 0,
.fval = 100000,
},
.milliamp = {
.ival = 0,
.fval = 7000,
},
},
{
.delay_ms = 8,
.resolution = {
.ival = 0,
.fval = 100000,
},
.milliamp = {
.ival = 0,
.fval = 5000,
},
},
{
.delay_ms = 5,
.resolution = {
.ival = 0,
.fval = 100000,
},
.milliamp = {
.ival = 0,
.fval = 3000,
},
},
};
static struct bmp_hal_dev bmp_hal_dev_180[] = {
{
.version = 1,
.scale_n = ARRAY_SIZE(bmp_scale_prs_180),
.scale = bmp_scale_prs_180,
.scale_float = {
.ival = 0,
.fval = 10000,
},
},
{
.version = 1,
.scale_n = ARRAY_SIZE(bmp_scale_tmp_180),
.scale = bmp_scale_tmp_180,
.scale_float = {
.ival = 0,
.fval = 100000,
}
},
};
static struct bmp_hal bmp_hal_180 = {
.dev = bmp_hal_dev_180,
.part = BMP180_NAME,
.rom_addr_start = BMP180_REG_AC1,
.rom_size = 22,
.rom_big_endian = true,
.mode_mask = BMP180_REG_CTRL_MODE_MASK,
.cmode_tbl = NULL,
.bmp_read = &bmp_read_180,
#if BMP_NVI_MPU_SUPPORT
.mpu_id = 0,
.port_rd_reg = BMP_REG_CTRL,
.port_rd_ctrl = 6,
.port_rd_handler = &bmp_mpu_handler_180,
#endif /* BMP_NVI_MPU_SUPPORT */
};
static struct bmp_scale bmp_scale_prs_280[] = {
{
.delay_ms = 44,
.os = 0x05,
.resolution = {
.ival = 0,
.fval = 1800,
},
.milliamp = {
.ival = 0,
.fval = 24800,
},
},
{
.delay_ms = 23,
.os = 0x04,
.resolution = {
.ival = 0,
.fval = 3600,
},
.milliamp = {
.ival = 0,
.fval = 12700,
},
},
{
.delay_ms = 14,
.os = 0x03,
.resolution = {
.ival = 0,
.fval = 7200,
},
.milliamp = {
.ival = 0,
.fval = 7020,
},
},
{
.delay_ms = 9,
.os = 0x02,
.resolution = {
.ival = 0,
.fval = 14300,
},
.milliamp = {
.ival = 0,
.fval = 4170,
},
},
{
.delay_ms = 7,
.os = 0x01,
.resolution = {
.ival = 0,
.fval = 28700,
},
.milliamp = {
.ival = 0,
.fval = 2740,
},
},
};
static struct bmp_scale bmp_scale_tmp_280[] = {
/* os oversampling is useless > 2x and only used for pressure @ 16x */
{
.delay_ms = 44,
.os = 0x02,
.resolution = {
.ival = 0,
.fval = 300,
},
.milliamp = {
.ival = 0,
.fval = 24800,
},
},
{
.delay_ms = 23,
.os = 0x01,
.resolution = {
.ival = 0,
.fval = 600,
},
.milliamp = {
.ival = 0,
.fval = 12700,
},
},
{
.delay_ms = 14,
.os = 0x01,
.resolution = {
.ival = 0,
.fval = 1200,
},
.milliamp = {
.ival = 0,
.fval = 7020,
},
},
{
.delay_ms = 9,
.os = 0x01,
.resolution = {
.ival = 0,
.fval = 2500,
},
.milliamp = {
.ival = 0,
.fval = 4170,
},
},
{
.delay_ms = 7,
.os = 0x01,
.resolution = {
.ival = 0,
.fval = 5000,
},
.milliamp = {
.ival = 0,
.fval = 2740,
},
},
};
static struct bmp_hal_dev bmp_hal_dev_280[] = {
{
.version = 1,
.scale_n = ARRAY_SIZE(bmp_scale_prs_280),
.scale = bmp_scale_prs_280,
.scale_float = {
.ival = 0,
.fval = 10000,
}
},
{
.version = 1,
.scale_n = ARRAY_SIZE(bmp_scale_tmp_280),
.scale = bmp_scale_tmp_280,
.scale_float = {
.ival = 0,
.fval = 10000,
},
},
};
static struct bmp_cmode bmp_cmode_280[] = {
{
.t_us = 4000000,
.t_sb = 0x07,
},
{
.t_us = 2000000,
.t_sb = 0x06,
},
{
.t_us = 1000000,
.t_sb = 0x05,
},
{
.t_us = 500000,
.t_sb = 0x04,
},
{
.t_us = 250000,
.t_sb = 0x03,
},
{
.t_us = 125000,
.t_sb = 0x02,
},
{
.t_us = 62500,
.t_sb = 0x01,
},
{
.t_us = 500,
.t_sb = 0x00,
},
{},
};
static struct bmp_hal bmp_hal_280 = {
.dev = bmp_hal_dev_280,
.part = BMP280_NAME,
.rom_addr_start = BMP280_REG_CWORD00,
.rom_size = 26,
.rom_big_endian = false,
.mode_mask = BMP280_REG_CTRL_MODE_MASK,
.cmode_tbl = bmp_cmode_280,
.bmp_read = &bmp_read_280,
#if BMP_NVI_MPU_SUPPORT
.mpu_id = PRESSURE_ID_BMP280,
.port_rd_reg = BMP280_REG_STATUS,
.port_rd_ctrl = 10,
.port_rd_handler = &bmp_mpu_handler_280,
#endif /* BMP_NVI_MPU_SUPPORT */
};
static int bmp_id_hal(struct bmp_state *st)
{
unsigned int i;
int ret = 0;
switch (st->dev_id) {
case BMP_REG_ID_BMP280:
st->hal = &bmp_hal_280;
break;
case BMP_REG_ID_BMP180:
st->hal = &bmp_hal_180;
break;
default:
dev_err(&st->i2c->dev, "%s ERR: Unknown device\n", __func__);
st->hal = &bmp_hal_280; /* to prevent NULL pointers */
ret = -ENODEV;
break;
}
/* default scale to fastest and least power usage */
st->scale_user = st->hal->dev[BMP_DEV_PRS].scale_n;
st->scale_i = st->scale_user - 1;
if (st->hal->cmode_tbl == NULL)
st->cmode = false;
for (i = 0; i < BMP_DEV_N; i++)
memcpy(&st->cfg[i], &bmp_cfg_dflt[i],
sizeof(struct sensor_cfg));
for (i = 0; i < BMP_DEV_N; i++) {
st->cfg[i].part = st->hal->part;
st->cfg[i].version = st->hal->dev[i].version;
st->cfg[i].scale.ival = st->hal->dev[i].scale_float.ival;
st->cfg[i].scale.fval = st->hal->dev[i].scale_float.fval;
}
return ret;
}
static int bmp_id_compare(struct bmp_state *st, u8 val, const char *name)
{
unsigned int i;
int ret = 0;
for (i = 0; i < ARRAY_SIZE(bmp_ids); i++) {
if (val == bmp_ids[i]) {
if ((st->dev_id == BMP_REG_ID_BMP180) &&
(st->dev_id != val))
dev_err(&st->i2c->dev, "%s ERR: %x != %s\n",
__func__, st->dev_id, name);
if (val != BMP_REG_ID_BMP180)
/* BMP280 may have more ID's than 0x56 */
val = BMP_REG_ID_BMP280;
st->dev_id = val;
break;
}
}
if (!st->dev_id) {
ret = -ENODEV;
dev_err(&st->i2c->dev, "%s ERR: ID %x != %s\n",
__func__, val, name);
} else {
dev_dbg(&st->i2c->dev, "%s using ID %x for %s\n",
__func__, st->dev_id, name);
}
return ret;
}
static int bmp_id_dev(struct bmp_state *st, const char *name)
{
#if BMP_NVI_MPU_SUPPORT
struct nvi_mpu_port nmp;
struct nvi_mpu_inf inf;
unsigned int i;
u8 config_boot;
#endif /* BMP_NVI_MPU_SUPPORT */
u8 val = 0;
int ret;
if (!strcmp(name, BMP180_NAME))
st->dev_id = BMP_REG_ID_BMP180;
else if (!strcmp(name, BMP280_NAME))
st->dev_id = BMP_REG_ID_BMP280;
#if BMP_NVI_MPU_SUPPORT
config_boot = st->nvi_config & NVI_CONFIG_BOOT_MASK;
if ((config_boot == NVI_CONFIG_BOOT_MPU) && (!st->dev_id)) {
dev_err(&st->i2c->dev, "%s ERR: NVI_CONFIG_BOOT_MPU && %s\n",
__func__, name);
config_boot = NVI_CONFIG_BOOT_AUTO;
}
if (config_boot == NVI_CONFIG_BOOT_AUTO) {
nmp.addr = st->i2c_addr | 0x80;
nmp.reg = BMP_REG_ID;
nmp.ctrl = 1;
ret = nvi_mpu_dev_valid(&nmp, &val);
dev_info(&st->i2c->dev, "%s AUTO ID=%x ret=%d\n",
__func__, val, ret);
/* see mpu_iio.h for possible return values */
if ((ret == -EAGAIN) || (ret == -EBUSY))
return -EAGAIN;
if (!ret)
ret = bmp_id_compare(st, val, name);
if ((!ret) || ((ret == -EIO) && (st->dev_id)))
config_boot = NVI_CONFIG_BOOT_MPU;
}
if (config_boot == NVI_CONFIG_BOOT_MPU) {
st->mpu_en = true;
bmp_id_hal(st);
nmp.type = SECONDARY_SLAVE_TYPE_PRESSURE;
nmp.id = st->hal->mpu_id;
nmp.addr = st->i2c_addr; /* write port */
nmp.reg = BMP_REG_CTRL;
nmp.ctrl = 1;
nmp.data_out = st->data_out;
nmp.delay_ms = st->hal->dev[BMP_DEV_PRS].
scale[st->scale_i].delay_ms;
nmp.period_us = 0;
nmp.shutdown_bypass = false;
nmp.handler = NULL;
nmp.ext_driver = NULL;
ret = nvi_mpu_port_alloc(&nmp);
dev_dbg(&st->i2c->dev, "%s MPU port/ret=%d\n",
__func__, ret);
/* By requesting the write port first it allows us to
* automatically determine if the DMP requires a single
* port, in which case this port request will fail.
* If this part does not support continuous mode
* required for single port operation, then this device
* population fails.
*/
if (ret < 0) {
if (st->hal->cmode_tbl)
st->cmode = true;
else
return ret;
} else {
st->cmode = false;
st->port_id[WR] = ret;
}
nmp.addr = st->i2c_addr | 0x80; /* read port */
nmp.data_out = 0;
nmp.delay_ms = 0;
nmp.period_us = st->period_us;
if (st->cmode)
nmp.shutdown_bypass = true;
nmp.ext_driver = (void *)st;
nmp.reg = st->hal->port_rd_reg;
nmp.ctrl = st->hal->port_rd_ctrl;
nmp.handler = st->hal->port_rd_handler;
ret = nvi_mpu_port_alloc(&nmp);
dev_dbg(&st->i2c->dev, "%s MPU port/ret=%d\n",
__func__, ret);
if (ret < 0) {
bmp_ports_free(st);
dev_err(&st->i2c->dev, "%s ERR %d\n",
__func__, ret);
return ret;
}
st->port_id[RD] = ret;
ret = nvi_mpu_info(st->port_id[RD], &inf);
if (ret)
return ret;
st->period_us_min = inf.period_us_min;
for (i = 0; i < BMP_DEV_N; i++) {
st->cfg[i].fifo_rsrv_evnt_cnt = inf.fifo_reserve;
st->cfg[i].fifo_max_evnt_cnt = inf.fifo_max;
st->cfg[i].delay_us_max = inf.period_us_max;
}
st->dmp_rd_len_sts = inf.dmp_rd_len_sts;
st->dmp_rd_len_data = inf.dmp_rd_len_data;
return 0;
}
#endif /* BMP_NVI_MPU_SUPPORT */
/* NVI_CONFIG_BOOT_HOST */
st->mpu_en = false;
if (!st->dev_id) {
ret = bmp_i2c_rd(st, BMP_REG_ID, 1, &val);
dev_dbg(&st->i2c->dev, "%s Host read ID=%x ret=%d\n",
__func__, val, ret);
if (!ret)
bmp_id_compare(st, val, name);
}
ret = bmp_id_hal(st);
return ret;
}
static int bmp_id_i2c(struct bmp_state *st,
const struct i2c_device_id *id)
{
int i;
int ret;
for (i = 0; i < ARRAY_SIZE(bmp_i2c_addrs); i++) {
if (st->i2c->addr == bmp_i2c_addrs[i])
break;
}
if (i < ARRAY_SIZE(bmp_i2c_addrs)) {
st->i2c_addr = st->i2c->addr;
ret = bmp_id_dev(st, id->name);
} else {
for (i = 0; i < ARRAY_SIZE(bmp_i2c_addrs); i++) {
st->i2c_addr = bmp_i2c_addrs[i];
ret = bmp_id_dev(st, BMP_NAME);
if ((ret == -EAGAIN) || (!ret))
break;
}
}
if (ret)
st->i2c_addr = 0;
return ret;
}
static int bmp_of_dt(struct bmp_state *st, struct device_node *dn)
{
char const *pchar;
u8 cfg;
int ret;
if (dn) {
/* just test if global disable */
ret = nvs_of_dt(dn, NULL, NULL);
if (ret == -ENODEV)
return -ENODEV;
/* this device supports these programmable parameters */
if (!of_property_read_string(dn, "nvi_config", &pchar)) {
for (cfg = 0; cfg < ARRAY_SIZE(bmp_configs); cfg++) {
if (!strcasecmp(pchar, bmp_configs[cfg])) {
st->nvi_config = cfg;
break;
}
}
}
if (!of_property_read_u8(dn, "cmode_enable", &cfg)) {
if (cfg)
st->cmode = true;
else
st->cmode = false;
}
}
return 0;
}
static int bmp_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct bmp_state *st;
unsigned int i;
unsigned int n;
int ret;
dev_info(&client->dev, "%s %s\n", id->name, __func__);
st = devm_kzalloc(&client->dev, sizeof(*st), GFP_KERNEL);
if (st == NULL) {
dev_err(&client->dev, "%s devm_kzalloc ERR\n", __func__);
return -ENOMEM;
}
i2c_set_clientdata(client, st);
st->i2c = client;
ret = bmp_of_dt(st, client->dev.of_node);
if (ret) {
if (ret == -ENODEV) {
dev_info(&client->dev, "%s DT disabled\n", __func__);
} else {
dev_err(&client->dev, "%s _of_dt ERR\n", __func__);
ret = -ENODEV;
}
goto bmp_probe_err;
}
bmp_pm_init(st);
ret = bmp_id_i2c(st, id);
if (ret == -EAGAIN) {
ret = -EPROBE_DEFER;
goto bmp_probe_exit;
} else if (ret) {
goto bmp_probe_err;
}
bmp_init_hw(st);
bmp_pm(st, false);
bmp_fn_dev.errs = &st->errs;
bmp_fn_dev.sts = &st->sts;
st->nvs = nvs_iio();
if (st->nvs == NULL) {
ret = -ENODEV;
goto bmp_probe_err;
}
st->cfg[BMP_DEV_PRS].resolution.ival = st->scale_user;
nvs_of_dt(client->dev.of_node, &st->cfg[BMP_DEV_PRS], NULL);
bmp_resolution(st, BMP_DEV_PRS, st->cfg[BMP_DEV_PRS].resolution.ival);
nvs_of_dt(client->dev.of_node, &st->cfg[BMP_DEV_TMP], NULL);
if (st->cfg[BMP_DEV_PRS].snsr_id < 0)
/* pressure disabled so use temperature settings */
bmp_resolution(st, BMP_DEV_PRS,
st->cfg[BMP_DEV_TMP].resolution.ival);
n = 0;
for (i = 0; i < BMP_DEV_N; i++) {
ret = st->nvs->probe(&st->nvs_st[i], st, &client->dev,
&bmp_fn_dev, &st->cfg[i]);
if (!ret)
n++;
}
if (!n) {
ret = -ENODEV;
goto bmp_probe_exit;
}
if (!st->mpu_en) {
st->wq = create_workqueue(BMP_NAME);
if (!st->wq) {
ret = -ENOMEM;
goto bmp_probe_err;
}
INIT_WORK(&st->ws, bmp_work);
}
dev_info(&client->dev, "%s done\n", __func__);
return 0;
bmp_probe_err:
dev_err(&client->dev, "%s ERR %d\n", __func__, ret);
bmp_probe_exit:
bmp_remove(client);
return ret;
}
static const struct i2c_device_id bmp_i2c_device_id[] = {
{ BMP_NAME, 0 },
{ BMP180_NAME, 0 },
{ BMP280_NAME, 0 },
{}
};
MODULE_DEVICE_TABLE(i2c, bmp_i2c_device_id);
static const struct of_device_id bmp_of_match[] = {
{ .compatible = "bmp,bmpX80", },
{ .compatible = "bmp,bmp180", },
{ .compatible = "bmp,bmp280", },
{},
};
MODULE_DEVICE_TABLE(of, bmp_of_match);
static struct i2c_driver bmp_driver = {
.class = I2C_CLASS_HWMON,
.probe = bmp_probe,
.remove = bmp_remove,
.shutdown = bmp_shutdown,
.driver = {
.name = BMP_NAME,
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(bmp_of_match),
.pm = &bmp_pm_ops,
},
.id_table = bmp_i2c_device_id,
};
static int __init bmp_init(void)
{
return i2c_add_driver(&bmp_driver);
}
static void __exit bmp_exit(void)
{
i2c_del_driver(&bmp_driver);
}
late_initcall(bmp_init);
module_exit(bmp_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("BMPX80 driver");
MODULE_AUTHOR("NVIDIA Corporation");