tegrakernel/kernel/nvidia/drivers/media/i2c/imx185_v1.c

1125 lines
29 KiB
C
Raw Permalink Normal View History

2022-02-16 09:13:02 -06:00
/*
* imx185.c - imx185 sensor driver
*
* Copyright (c) 2016-2019, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/seq_file.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <media/tegra_v4l2_camera.h>
#include <media/tegra-v4l2-camera.h>
#include <media/camera_common.h>
#include "imx185_v1_mode_tbls.h"
#define IMX185_DEFAULT_MODE IMX185_MODE_1920X1080_CROP_30FPS
#define IMX185_DEFAULT_DATAFMT MEDIA_BUS_FMT_SRGGB12_1X12
#define IMX185_MIN_FRAME_LENGTH (1125)
#define IMX185_MAX_FRAME_LENGTH (0x1FFFF)
#define IMX185_MIN_SHS1_1080P_HDR (5)
#define IMX185_MIN_SHS2_1080P_HDR (82)
#define IMX185_MAX_SHS2_1080P_HDR (IMX185_MAX_FRAME_LENGTH - 5)
#define IMX185_MAX_SHS1_1080P_HDR (IMX185_MAX_SHS2_1080P_HDR / 16)
#define IMX185_FRAME_LENGTH_ADDR_MSB 0x301A
#define IMX185_FRAME_LENGTH_ADDR_MID 0x3019
#define IMX185_FRAME_LENGTH_ADDR_LSB 0x3018
#define IMX185_COARSE_TIME_SHS1_ADDR_MSB 0x3022
#define IMX185_COARSE_TIME_SHS1_ADDR_MID 0x3021
#define IMX185_COARSE_TIME_SHS1_ADDR_LSB 0x3020
#define IMX185_COARSE_TIME_SHS2_ADDR_MSB 0x3025
#define IMX185_COARSE_TIME_SHS2_ADDR_MID 0x3024
#define IMX185_COARSE_TIME_SHS2_ADDR_LSB 0x3023
#define IMX185_GAIN_ADDR 0x3014
#define IMX185_GROUP_HOLD_ADDR 0x3001
#define IMX185_SW_RESET_ADDR 0x3003
#define IMX185_FUSE_ID_ADDR 0x3382
#define IMX185_FUSE_ID_SIZE 6
#define IMX185_FUSE_ID_STR_SIZE (IMX185_FUSE_ID_SIZE * 2)
#define IMX185_DEFAULT_WIDTH 1920
#define IMX185_DEFAULT_HEIGHT 1080
#define IMX185_DEFAULT_CLK_FREQ 37125000
struct imx185 {
struct camera_common_power_rail power;
int numctrls;
struct v4l2_ctrl_handler ctrl_handler;
struct i2c_client *i2c_client;
struct v4l2_subdev *subdev;
struct media_pad pad;
u32 frame_length;
s32 group_hold_prev;
bool group_hold_en;
s64 last_wdr_et_val;
struct regmap *regmap;
struct camera_common_data *s_data;
struct camera_common_pdata *pdata;
struct v4l2_ctrl *ctrls[];
};
static const struct regmap_config sensor_regmap_config = {
.reg_bits = 16,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
.use_single_rw = true,
};
static int imx185_g_volatile_ctrl(struct v4l2_ctrl *ctrl);
static int imx185_s_ctrl(struct v4l2_ctrl *ctrl);
static const struct v4l2_ctrl_ops imx185_ctrl_ops = {
.g_volatile_ctrl = imx185_g_volatile_ctrl,
.s_ctrl = imx185_s_ctrl,
};
static struct v4l2_ctrl_config ctrl_config_list[] = {
/* Do not change the name field for the controls! */
{
.ops = &imx185_ctrl_ops,
.id = TEGRA_CAMERA_CID_GAIN,
.name = "Gain",
.type = V4L2_CTRL_TYPE_INTEGER64,
.flags = V4L2_CTRL_FLAG_SLIDER,
.min = 0 * FIXED_POINT_SCALING_FACTOR,
.max = 48 * FIXED_POINT_SCALING_FACTOR,
.def = 0 * FIXED_POINT_SCALING_FACTOR,
.step = 3 * FIXED_POINT_SCALING_FACTOR / 10, /* 0.3 db */
},
{
.ops = &imx185_ctrl_ops,
.id = TEGRA_CAMERA_CID_EXPOSURE,
.name = "Exposure",
.type = V4L2_CTRL_TYPE_INTEGER64,
.flags = V4L2_CTRL_FLAG_SLIDER,
.min = 30 * FIXED_POINT_SCALING_FACTOR / 1000000,
.max = 1000000LL * FIXED_POINT_SCALING_FACTOR / 1000000,
.def = 30 * FIXED_POINT_SCALING_FACTOR / 1000000,
.step = 1 * FIXED_POINT_SCALING_FACTOR / 1000000,
},
{
.ops = &imx185_ctrl_ops,
.id = TEGRA_CAMERA_CID_FRAME_RATE,
.name = "Frame Rate",
.type = V4L2_CTRL_TYPE_INTEGER64,
.flags = V4L2_CTRL_FLAG_SLIDER,
.min = 1 * FIXED_POINT_SCALING_FACTOR,
.max = 60 * FIXED_POINT_SCALING_FACTOR,
.def = 30 * FIXED_POINT_SCALING_FACTOR,
.step = 1 * FIXED_POINT_SCALING_FACTOR,
},
{
.ops = &imx185_ctrl_ops,
.id = TEGRA_CAMERA_CID_GROUP_HOLD,
.name = "Group Hold",
.type = V4L2_CTRL_TYPE_INTEGER_MENU,
.min = 0,
.max = ARRAY_SIZE(switch_ctrl_qmenu) - 1,
.menu_skip_mask = 0,
.def = 0,
.qmenu_int = switch_ctrl_qmenu,
},
{
.ops = &imx185_ctrl_ops,
.id = TEGRA_CAMERA_CID_HDR_EN,
.name = "HDR enable",
.type = V4L2_CTRL_TYPE_INTEGER_MENU,
.min = 0,
.max = ARRAY_SIZE(switch_ctrl_qmenu) - 1,
.menu_skip_mask = 0,
.def = 0,
.qmenu_int = switch_ctrl_qmenu,
},
{
.ops = &imx185_ctrl_ops,
.id = TEGRA_CAMERA_CID_FUSE_ID,
.name = "Fuse ID",
.type = V4L2_CTRL_TYPE_STRING,
.flags = V4L2_CTRL_FLAG_READ_ONLY,
.min = 0,
.max = IMX185_FUSE_ID_STR_SIZE,
.step = 2,
},
{
.ops = &imx185_ctrl_ops,
.id = TEGRA_CAMERA_CID_SENSOR_MODE_ID,
.name = "Sensor Mode",
.type = V4L2_CTRL_TYPE_INTEGER64,
.flags = V4L2_CTRL_FLAG_SLIDER,
.min = 0,
.max = 0xFF,
.def = 0xFE,
.step = 1,
},
};
static inline void imx185_get_frame_length_regs(imx185_reg *regs,
u32 frame_length)
{
regs->addr = IMX185_FRAME_LENGTH_ADDR_MSB;
regs->val = (frame_length >> 16) & 0x01;
(regs + 1)->addr = IMX185_FRAME_LENGTH_ADDR_MID;
(regs + 1)->val = (frame_length >> 8) & 0xff;
(regs + 2)->addr = IMX185_FRAME_LENGTH_ADDR_LSB;
(regs + 2)->val = (frame_length) & 0xff;
}
static inline void imx185_get_coarse_time_regs_shs1(imx185_reg *regs,
u32 coarse_time)
{
regs->addr = IMX185_COARSE_TIME_SHS1_ADDR_MSB;
regs->val = (coarse_time >> 16) & 0x01;
(regs + 1)->addr = IMX185_COARSE_TIME_SHS1_ADDR_MID;
(regs + 1)->val = (coarse_time >> 8) & 0xff;
(regs + 2)->addr = IMX185_COARSE_TIME_SHS1_ADDR_LSB;
(regs + 2)->val = (coarse_time) & 0xff;
}
static inline void imx185_get_coarse_time_regs_shs2(imx185_reg *regs,
u32 coarse_time)
{
regs->addr = IMX185_COARSE_TIME_SHS2_ADDR_MSB;
regs->val = (coarse_time >> 16) & 0x01;
(regs + 1)->addr = IMX185_COARSE_TIME_SHS2_ADDR_MID;
(regs + 1)->val = (coarse_time >> 8) & 0xff;
(regs + 2)->addr = IMX185_COARSE_TIME_SHS2_ADDR_LSB;
(regs + 2)->val = (coarse_time) & 0xff;
}
static inline void imx185_get_gain_reg(imx185_reg *regs,
u8 gain)
{
regs->addr = IMX185_GAIN_ADDR;
regs->val = (gain) & 0xff;
}
static int test_mode;
module_param(test_mode, int, 0644);
static inline int imx185_read_reg(struct camera_common_data *s_data,
u16 addr, u8 *val)
{
struct imx185 *priv = (struct imx185 *)s_data->priv;
int err = 0;
u32 reg_val = 0;
err = regmap_read(priv->regmap, addr, &reg_val);
*val = reg_val & 0xFF;
return err;
}
static int imx185_write_reg(struct camera_common_data *s_data,
u16 addr, u8 val)
{
int err;
struct imx185 *priv = (struct imx185 *)s_data->priv;
struct device *dev = &priv->i2c_client->dev;
err = regmap_write(priv->regmap, addr, val);
if (err)
dev_err(dev, "%s: i2c write failed, 0x%x = %x\n",
__func__, addr, val);
return err;
}
static int imx185_write_table(struct imx185 *priv,
const imx185_reg table[])
{
return regmap_util_write_table_8(priv->regmap,
table,
NULL, 0,
IMX185_TABLE_WAIT_MS,
IMX185_TABLE_END);
}
static int imx185_power_on(struct camera_common_data *s_data)
{
int err = 0;
struct imx185 *priv = (struct imx185 *)s_data->priv;
struct camera_common_power_rail *pw = &priv->power;
struct device *dev = &priv->i2c_client->dev;
dev_dbg(dev, "%s: power on\n", __func__);
if (priv->pdata && priv->pdata->power_on) {
err = priv->pdata->power_on(pw);
if (err)
dev_err(dev, "%s failed.\n", __func__);
else
pw->state = SWITCH_ON;
return err;
}
/*exit reset mode: XCLR */
if (pw->reset_gpio) {
gpio_set_value(pw->reset_gpio, 0);
usleep_range(30, 50);
gpio_set_value(pw->reset_gpio, 1);
usleep_range(30, 50);
}
pw->state = SWITCH_ON;
return 0;
}
static int imx185_power_off(struct camera_common_data *s_data)
{
int err = 0;
struct imx185 *priv = (struct imx185 *)s_data->priv;
struct camera_common_power_rail *pw = &priv->power;
struct device *dev = &priv->i2c_client->dev;
dev_dbg(dev, "%s: power off\n", __func__);
if (priv->pdata && priv->pdata->power_off) {
err = priv->pdata->power_off(pw);
if (!err)
goto power_off_done;
else
dev_err(dev, "%s failed.\n", __func__);
return err;
}
/* enter reset mode: XCLR */
usleep_range(1, 2);
if (pw->reset_gpio)
gpio_set_value(pw->reset_gpio, 0);
power_off_done:
pw->state = SWITCH_OFF;
return 0;
}
static int imx185_power_get(struct imx185 *priv)
{
struct camera_common_power_rail *pw = &priv->power;
struct camera_common_pdata *pdata = priv->pdata;
struct device *dev = &priv->i2c_client->dev;
const char *mclk_name;
struct clk *parent;
int err = 0;
mclk_name = priv->pdata->mclk_name ?
priv->pdata->mclk_name : "extperiph1";
pw->mclk = devm_clk_get(dev, mclk_name);
if (IS_ERR(pw->mclk)) {
dev_err(dev, "unable to get clock %s\n", mclk_name);
return PTR_ERR(pw->mclk);
}
parent = devm_clk_get(dev, "pllp_grtba");
if (IS_ERR(parent))
dev_err(dev, "devm_clk_get failed for pllp_grtba");
else
clk_set_parent(pw->mclk, parent);
pw->reset_gpio = pdata->reset_gpio;
pw->state = SWITCH_OFF;
return err;
}
static int imx185_set_coarse_time(struct imx185 *priv, s64 val);
static int imx185_set_coarse_time_hdr(struct imx185 *priv, s64 val);
static int imx185_set_gain(struct imx185 *priv, s64 val);
static int imx185_set_frame_rate(struct imx185 *priv, s64 val);
static int imx185_set_exposure(struct imx185 *priv, s64 val);
static int imx185_s_stream(struct v4l2_subdev *sd, int enable)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct device *dev = &client->dev;
struct camera_common_data *s_data = to_camera_common_data(dev);
struct imx185 *priv = (struct imx185 *)s_data->priv;
struct v4l2_ext_controls ctrls;
struct v4l2_ext_control control[3];
int err;
dev_dbg(dev, "%s++ enable %d\n", __func__, enable);
if (!enable) {
err = imx185_write_table(priv,
mode_table[IMX185_MODE_STOP_STREAM]);
if (err)
return err;
/* SW_RESET will have no ACK */
regmap_write(priv->regmap, IMX185_SW_RESET_ADDR, 0x01);
/* Wait for one frame to make sure sensor is set to
* software standby in V-blank
*
* delay = frame length rows * Tline (10 us)
*/
usleep_range(priv->frame_length * 10,
priv->frame_length * 10 + 1000);
return 0;
}
err = imx185_write_table(priv, mode_table[s_data->mode]);
if (err)
goto exit;
if (s_data->override_enable) {
/* write list of override regs for the asking gain, */
/* frame rate and exposure time */
memset(&ctrls, 0, sizeof(ctrls));
#if LINUX_VERSION_CODE > KERNEL_VERSION(4, 9, 0)
ctrls.which = V4L2_CTRL_ID2WHICH(TEGRA_CAMERA_CID_GAIN);
#else
ctrls.ctrl_class = V4L2_CTRL_ID2CLASS(TEGRA_CAMERA_CID_GAIN);
#endif
ctrls.count = 3;
ctrls.controls = control;
control[0].id = TEGRA_CAMERA_CID_GAIN;
control[1].id = TEGRA_CAMERA_CID_FRAME_RATE;
control[2].id = TEGRA_CAMERA_CID_EXPOSURE;
err = v4l2_g_ext_ctrls(&priv->ctrl_handler, &ctrls);
if (err == 0) {
err |= imx185_set_gain(priv, control[0].value64);
if (err)
dev_err(dev, "%s: error gain override\n",
__func__);
err |= imx185_set_frame_rate(priv, control[1].value64);
if (err)
dev_err(dev,
"%s: error frame length override\n",
__func__);
err |= imx185_set_exposure(priv, control[2].value64);
if (err)
dev_err(dev, "%s: error exposure override\n",
__func__);
} else {
dev_err(dev, "%s: faile to get overrides\n", __func__);
}
}
if (test_mode) {
err = imx185_write_table(priv,
mode_table[IMX185_MODE_TEST_PATTERN]);
if (err)
goto exit;
}
err = imx185_write_table(priv, mode_table[IMX185_MODE_START_STREAM]);
if (err)
goto exit;
return 0;
exit:
dev_err(dev, "%s: error setting stream\n", __func__);
return err;
}
static int imx185_g_input_status(struct v4l2_subdev *sd, u32 *status)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct camera_common_data *s_data = to_camera_common_data(&client->dev);
struct imx185 *priv = (struct imx185 *)s_data->priv;
struct camera_common_power_rail *pw = &priv->power;
*status = pw->state == SWITCH_ON;
return 0;
}
static struct v4l2_subdev_video_ops imx185_subdev_video_ops = {
.s_stream = imx185_s_stream,
.g_mbus_config = camera_common_g_mbus_config,
.g_input_status = imx185_g_input_status,
};
static struct v4l2_subdev_core_ops imx185_subdev_core_ops = {
.s_power = camera_common_s_power,
};
static int imx185_get_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
{
return camera_common_g_fmt(sd, &format->format);
}
static int imx185_set_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_format *format)
{
int ret;
if (format->which == V4L2_SUBDEV_FORMAT_TRY)
ret = camera_common_try_fmt(sd, &format->format);
else
ret = camera_common_s_fmt(sd, &format->format);
return ret;
}
static struct v4l2_subdev_pad_ops imx185_subdev_pad_ops = {
.set_fmt = imx185_set_fmt,
.get_fmt = imx185_get_fmt,
.enum_mbus_code = camera_common_enum_mbus_code,
.enum_frame_size = camera_common_enum_framesizes,
.enum_frame_interval = camera_common_enum_frameintervals,
};
static struct v4l2_subdev_ops imx185_subdev_ops = {
.core = &imx185_subdev_core_ops,
.video = &imx185_subdev_video_ops,
.pad = &imx185_subdev_pad_ops,
};
const static struct of_device_id imx185_of_match[] = {
{ .compatible = "nvidia,imx185_v1",},
{ },
};
static struct camera_common_sensor_ops imx185_common_ops = {
.power_on = imx185_power_on,
.power_off = imx185_power_off,
.write_reg = imx185_write_reg,
.read_reg = imx185_read_reg,
};
static int imx185_set_group_hold(struct imx185 *priv, s32 val)
{
struct device *dev = &priv->i2c_client->dev;
int err;
int gh_en = switch_ctrl_qmenu[val];
priv->group_hold_prev = val;
if (gh_en == SWITCH_ON) {
err = imx185_write_reg(priv->s_data,
IMX185_GROUP_HOLD_ADDR, 0x1);
if (err)
goto fail;
} else if (gh_en == SWITCH_OFF) {
err = imx185_write_reg(priv->s_data,
IMX185_GROUP_HOLD_ADDR, 0x0);
if (err)
goto fail;
}
return 0;
fail:
dev_dbg(dev, "%s: Group hold control error\n", __func__);
return err;
}
static int imx185_set_gain(struct imx185 *priv, s64 val)
{
struct device *dev = &priv->i2c_client->dev;
imx185_reg reg_list[1];
int err;
u8 gain;
/* translate value */
gain = (u8) (val * 160 / (48 * FIXED_POINT_SCALING_FACTOR));
dev_dbg(dev, "%s: gain reg: %d\n", __func__, gain);
imx185_get_gain_reg(reg_list, gain);
err = imx185_write_reg(priv->s_data, reg_list[0].addr,
reg_list[0].val);
if (err)
goto fail;
return 0;
fail:
dev_dbg(dev, "%s: GAIN control error\n", __func__);
return err;
}
static int imx185_set_frame_rate(struct imx185 *priv, s64 val)
{
struct device *dev = &priv->i2c_client->dev;
imx185_reg reg_list[3];
int err;
u32 frame_length;
struct camera_common_data *s_data = priv->s_data;
const struct sensor_mode_properties *mode =
&s_data->sensor_props.sensor_modes[s_data->mode];
struct v4l2_control control;
int hdr_en;
int i = 0;
frame_length = mode->signal_properties.pixel_clock.val *
FIXED_POINT_SCALING_FACTOR /
mode->image_properties.line_length / val;
priv->frame_length = frame_length;
if (priv->frame_length > IMX185_MAX_FRAME_LENGTH)
priv->frame_length = IMX185_MAX_FRAME_LENGTH;
dev_dbg(dev, "%s: val: %lld, , frame_length: %d\n", __func__,
val, priv->frame_length);
imx185_get_frame_length_regs(reg_list, priv->frame_length);
for (i = 0; i < 3; i++) {
err = imx185_write_reg(priv->s_data, reg_list[i].addr,
reg_list[i].val);
if (err)
goto fail;
}
/* check hdr enable ctrl */
control.id = TEGRA_CAMERA_CID_HDR_EN;
err = camera_common_g_ctrl(priv->s_data, &control);
if (err < 0) {
dev_err(dev, "could not find device ctrl.\n");
return err;
}
hdr_en = switch_ctrl_qmenu[control.value];
if ((hdr_en == SWITCH_ON) && (priv->last_wdr_et_val != 0)) {
err = imx185_set_coarse_time_hdr(priv, priv->last_wdr_et_val);
if (err)
dev_dbg(dev,
"%s: error coarse time SHS1 SHS2 override\n", __func__);
}
return 0;
fail:
dev_dbg(dev, "%s: FRAME_LENGTH control error\n", __func__);
return err;
}
static int imx185_set_exposure(struct imx185 *priv, s64 val)
{
struct device *dev = &priv->i2c_client->dev;
int err;
struct v4l2_control control;
int hdr_en;
dev_dbg(dev, "%s: val: %lld\n", __func__, val);
/* check hdr enable ctrl */
control.id = TEGRA_CAMERA_CID_HDR_EN;
err = camera_common_g_ctrl(priv->s_data, &control);
if (err < 0) {
dev_err(dev, "could not find device ctrl.\n");
return err;
}
hdr_en = switch_ctrl_qmenu[control.value];
if (hdr_en == SWITCH_ON) {
err = imx185_set_coarse_time_hdr(priv, val);
if (err)
dev_dbg(dev,
"%s: error coarse time SHS1 SHS2 override\n", __func__);
} else {
err = imx185_set_coarse_time(priv, val);
if (err)
dev_dbg(dev,
"%s: error coarse time SHS1 override\n", __func__);
}
return err;
}
static int imx185_set_coarse_time(struct imx185 *priv, s64 val)
{
struct camera_common_data *s_data = priv->s_data;
const struct sensor_mode_properties *mode =
&s_data->sensor_props.sensor_modes[s_data->mode];
struct device *dev = &priv->i2c_client->dev;
imx185_reg reg_list[3];
int err;
u32 coarse_time_shs1;
u32 reg_shs1;
int i = 0;
coarse_time_shs1 = mode->signal_properties.pixel_clock.val *
val / mode->image_properties.line_length /
FIXED_POINT_SCALING_FACTOR;
if (priv->frame_length == 0)
priv->frame_length = IMX185_MIN_FRAME_LENGTH;
reg_shs1 = priv->frame_length - coarse_time_shs1 - 1;
dev_dbg(dev, "%s: coarse1:%d, shs1:%d, FL:%d\n", __func__,
coarse_time_shs1, reg_shs1, priv->frame_length);
imx185_get_coarse_time_regs_shs1(reg_list, reg_shs1);
for (i = 0; i < 3; i++) {
err = imx185_write_reg(priv->s_data, reg_list[i].addr,
reg_list[i].val);
if (err)
goto fail;
}
return 0;
fail:
dev_dbg(dev, "%s: set coarse time error\n", __func__);
return err;
}
static int imx185_set_coarse_time_hdr(struct imx185 *priv, s64 val)
{
struct device *dev = &priv->i2c_client->dev;
struct camera_common_data *s_data = priv->s_data;
const struct sensor_mode_properties *mode =
&s_data->sensor_props.sensor_modes[s_data->mode];
imx185_reg reg_list_shs1[3];
imx185_reg reg_list_shs2[3];
u32 coarse_time_shs1;
u32 coarse_time_shs2;
u32 reg_shs1;
u32 reg_shs2;
int err;
int i = 0;
if (priv->frame_length == 0)
priv->frame_length = IMX185_MIN_FRAME_LENGTH;
priv->last_wdr_et_val = val;
/*WDR, update SHS1 as short ET, and SHS2 is 16x of short*/
coarse_time_shs1 = mode->signal_properties.pixel_clock.val *
val / mode->image_properties.line_length /
FIXED_POINT_SCALING_FACTOR / 16;
if (coarse_time_shs1 < IMX185_MIN_SHS1_1080P_HDR)
coarse_time_shs1 = IMX185_MIN_SHS1_1080P_HDR;
if (coarse_time_shs1 > IMX185_MAX_SHS1_1080P_HDR)
coarse_time_shs1 = IMX185_MAX_SHS1_1080P_HDR;
coarse_time_shs2 = (coarse_time_shs1 - IMX185_MIN_SHS1_1080P_HDR) * 16 +
IMX185_MIN_SHS2_1080P_HDR;
reg_shs1 = priv->frame_length - coarse_time_shs1 - 1;
reg_shs2 = priv->frame_length - coarse_time_shs2 - 1;
imx185_get_coarse_time_regs_shs1(reg_list_shs1, reg_shs1);
imx185_get_coarse_time_regs_shs2(reg_list_shs2, reg_shs2);
dev_dbg(dev, "%s: coarse1:%d, shs1:%d, coarse2:%d, shs2: %d, FL:%d\n",
__func__,
coarse_time_shs1, reg_shs1,
coarse_time_shs2, reg_shs2,
priv->frame_length);
for (i = 0; i < 3; i++) {
err = imx185_write_reg(priv->s_data, reg_list_shs1[i].addr,
reg_list_shs1[i].val);
if (err)
goto fail;
err = imx185_write_reg(priv->s_data, reg_list_shs2[i].addr,
reg_list_shs2[i].val);
if (err)
goto fail;
}
return 0;
fail:
dev_dbg(dev, "%s: set WDR coarse time error\n", __func__);
return err;
}
static int imx185_fuse_id_setup(struct imx185 *priv)
{
int err;
int i;
struct i2c_client *client = v4l2_get_subdevdata(priv->subdev);
struct device *dev = &client->dev;
struct camera_common_data *s_data = to_camera_common_data(dev);
struct v4l2_ctrl *ctrl;
u8 fuse_id[IMX185_FUSE_ID_SIZE];
u8 bak = 0;
err = camera_common_s_power(priv->subdev, true);
if (err)
return -ENODEV;
for (i = 0; i < IMX185_FUSE_ID_SIZE; i++) {
err |= imx185_read_reg(s_data,
IMX185_FUSE_ID_ADDR + i, &bak);
if (!err)
fuse_id[i] = bak;
else {
dev_err(dev, "%s: can not read fuse id\n", __func__);
return -EINVAL;
}
}
ctrl = v4l2_ctrl_find(&priv->ctrl_handler, TEGRA_CAMERA_CID_FUSE_ID);
if (!ctrl) {
dev_err(dev, "could not find device ctrl.\n");
return -EINVAL;
}
for (i = 0; i < IMX185_FUSE_ID_SIZE; i++)
sprintf(&ctrl->p_new.p_char[i*2], "%02x",
fuse_id[i]);
ctrl->p_cur.p_char = ctrl->p_new.p_char;
dev_info(dev, "%s, fuse id: %s\n", __func__, ctrl->p_cur.p_char);
err = camera_common_s_power(priv->subdev, false);
if (err)
return -ENODEV;
return 0;
}
static int imx185_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
struct imx185 *priv =
container_of(ctrl->handler, struct imx185, ctrl_handler);
struct device *dev = &priv->i2c_client->dev;
int err = 0;
if (priv->power.state == SWITCH_OFF)
return 0;
switch (ctrl->id) {
default:
dev_err(dev, "%s: unknown ctrl id.\n", __func__);
return -EINVAL;
}
return err;
}
static int imx185_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct imx185 *priv =
container_of(ctrl->handler, struct imx185, ctrl_handler);
struct camera_common_data *s_data = priv->s_data;
struct device *dev = &priv->i2c_client->dev;
int err = 0;
if (priv->power.state == SWITCH_OFF)
return 0;
switch (ctrl->id) {
case TEGRA_CAMERA_CID_GAIN:
err = imx185_set_gain(priv, *ctrl->p_new.p_s64);
break;
case TEGRA_CAMERA_CID_EXPOSURE:
err = imx185_set_exposure(priv, *ctrl->p_new.p_s64);
break;
case TEGRA_CAMERA_CID_FRAME_RATE:
err = imx185_set_frame_rate(priv, *ctrl->p_new.p_s64);
break;
case TEGRA_CAMERA_CID_GROUP_HOLD:
err = imx185_set_group_hold(priv, ctrl->val);
break;
case TEGRA_CAMERA_CID_HDR_EN:
break;
case TEGRA_CAMERA_CID_SENSOR_MODE_ID:
s_data->sensor_mode_id = (int) (*ctrl->p_new.p_s64);
break;
default:
dev_err(dev, "%s: unknown ctrl id.\n", __func__);
return -EINVAL;
}
return err;
}
static int imx185_ctrls_init(struct imx185 *priv)
{
struct i2c_client *client = priv->i2c_client;
struct v4l2_ctrl *ctrl;
int num_ctrls;
int err;
int i;
dev_dbg(&client->dev, "%s++\n", __func__);
num_ctrls = ARRAY_SIZE(ctrl_config_list);
v4l2_ctrl_handler_init(&priv->ctrl_handler, num_ctrls);
for (i = 0; i < num_ctrls; i++) {
ctrl = v4l2_ctrl_new_custom(&priv->ctrl_handler,
&ctrl_config_list[i], NULL);
if (ctrl == NULL) {
dev_err(&client->dev, "Failed to init %s ctrl\n",
ctrl_config_list[i].name);
continue;
}
if (ctrl_config_list[i].type == V4L2_CTRL_TYPE_STRING &&
ctrl_config_list[i].flags & V4L2_CTRL_FLAG_READ_ONLY) {
ctrl->p_new.p_char = devm_kzalloc(&client->dev,
ctrl_config_list[i].max + 1, GFP_KERNEL);
}
priv->ctrls[i] = ctrl;
}
priv->numctrls = num_ctrls;
priv->subdev->ctrl_handler = &priv->ctrl_handler;
if (priv->ctrl_handler.error) {
dev_err(&client->dev, "Error %d adding controls\n",
priv->ctrl_handler.error);
err = priv->ctrl_handler.error;
goto error;
}
err = v4l2_ctrl_handler_setup(&priv->ctrl_handler);
if (err) {
dev_err(&client->dev,
"Error %d setting default controls\n", err);
goto error;
}
err = imx185_fuse_id_setup(priv);
if (err) {
dev_err(&client->dev,
"Error %d reading fuse id data\n", err);
goto error;
}
return 0;
error:
v4l2_ctrl_handler_free(&priv->ctrl_handler);
return err;
}
MODULE_DEVICE_TABLE(of, imx185_of_match);
static struct camera_common_pdata *imx185_parse_dt(struct i2c_client *client,
struct camera_common_data *s_data)
{
struct device_node *np = client->dev.of_node;
struct camera_common_pdata *board_priv_pdata;
const struct of_device_id *match;
int err;
int gpio;
const char *str;
if (!np)
return NULL;
match = of_match_device(imx185_of_match, &client->dev);
if (!match) {
dev_err(&client->dev, "Failed to find matching dt id\n");
return NULL;
}
err = of_property_read_string(np, "use_sensor_mode_id", &str);
if (!err) {
if (!strcmp(str, "true"))
s_data->use_sensor_mode_id = true;
else
s_data->use_sensor_mode_id = false;
}
board_priv_pdata = devm_kzalloc(&client->dev,
sizeof(*board_priv_pdata), GFP_KERNEL);
err = of_property_read_string(np, "mclk",
&board_priv_pdata->mclk_name);
if (err)
dev_err(&client->dev, "mclk not in DT\n");
gpio = of_get_named_gpio(np, "reset-gpios", 0);
if (gpio < 0) {
dev_err(&client->dev, "reset-gpios not found %d\n", gpio);
gpio = 0;
}
board_priv_pdata->reset_gpio = (unsigned int)gpio;
return board_priv_pdata;
}
static int imx185_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
dev_dbg(&client->dev, "%s:\n", __func__);
return 0;
}
static const struct v4l2_subdev_internal_ops imx185_subdev_internal_ops = {
.open = imx185_open,
};
static const struct media_entity_operations imx185_media_ops = {
.link_validate = v4l2_subdev_link_validate,
};
static int imx185_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct camera_common_data *common_data;
struct imx185 *priv;
int err;
dev_info(&client->dev, "probing imx185_v1 v4l2 sensor\n");
if (!IS_ENABLED(CONFIG_OF) || !client->dev.of_node)
return -EINVAL;
common_data = devm_kzalloc(&client->dev,
sizeof(struct camera_common_data), GFP_KERNEL);
priv = devm_kzalloc(&client->dev,
sizeof(struct imx185) + sizeof(struct v4l2_ctrl *) *
ARRAY_SIZE(ctrl_config_list),
GFP_KERNEL);
if (!priv) {
dev_err(&client->dev, "unable to allocate memory!\n");
return -ENOMEM;
}
priv->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
if (IS_ERR(priv->regmap)) {
dev_err(&client->dev,
"regmap init failed: %ld\n", PTR_ERR(priv->regmap));
return -ENODEV;
}
if (client->dev.of_node)
priv->pdata = imx185_parse_dt(client, common_data);
if (!priv->pdata) {
dev_err(&client->dev, "unable to get platform data\n");
return -EFAULT;
}
common_data->ops = &imx185_common_ops;
common_data->ctrl_handler = &priv->ctrl_handler;
common_data->dev = &client->dev;
common_data->frmfmt = &imx185_frmfmt[0];
common_data->colorfmt = camera_common_find_datafmt(
IMX185_DEFAULT_DATAFMT);
common_data->power = &priv->power;
common_data->ctrls = priv->ctrls;
common_data->priv = (void *)priv;
common_data->numctrls = ARRAY_SIZE(ctrl_config_list);
common_data->numfmts = ARRAY_SIZE(imx185_frmfmt);
common_data->def_mode = IMX185_DEFAULT_MODE;
common_data->def_width = IMX185_DEFAULT_WIDTH;
common_data->def_height = IMX185_DEFAULT_HEIGHT;
common_data->fmt_width = common_data->def_width;
common_data->fmt_height = common_data->def_height;
common_data->def_clk_freq = IMX185_DEFAULT_CLK_FREQ;
priv->i2c_client = client;
priv->s_data = common_data;
priv->subdev = &common_data->subdev;
priv->subdev->dev = &client->dev;
priv->s_data->dev = &client->dev;
priv->last_wdr_et_val = 0;
err = imx185_power_get(priv);
if (err)
return err;
err = camera_common_initialize(common_data, "imx185");
if (err) {
dev_err(&client->dev, "Failed to initialize imx185.\n");
return err;
}
v4l2_i2c_subdev_init(priv->subdev, client, &imx185_subdev_ops);
err = imx185_ctrls_init(priv);
if (err)
return err;
priv->subdev->internal_ops = &imx185_subdev_internal_ops;
priv->subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
V4L2_SUBDEV_FL_HAS_EVENTS;
#if defined(CONFIG_MEDIA_CONTROLLER)
priv->pad.flags = MEDIA_PAD_FL_SOURCE;
priv->subdev->entity.ops = &imx185_media_ops;
err = tegra_media_entity_init(&priv->subdev->entity, 1,
&priv->pad, true, true);
if (err < 0) {
dev_err(&client->dev, "unable to init media entity\n");
return err;
}
#endif
err = v4l2_async_register_subdev(priv->subdev);
if (err)
return err;
dev_info(&client->dev, "Detected IMX185 sensor\n");
return 0;
}
static int
imx185_remove(struct i2c_client *client)
{
struct camera_common_data *s_data = to_camera_common_data(&client->dev);
struct imx185 *priv = (struct imx185 *)s_data->priv;
v4l2_async_unregister_subdev(priv->subdev);
#if defined(CONFIG_MEDIA_CONTROLLER)
media_entity_cleanup(&priv->subdev->entity);
#endif
v4l2_ctrl_handler_free(&priv->ctrl_handler);
camera_common_cleanup(s_data);
return 0;
}
static const struct i2c_device_id imx185_id[] = {
{ "imx185_v1", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, imx185_id);
static struct i2c_driver imx185_i2c_driver = {
.driver = {
.name = "imx185_v1",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(imx185_of_match),
},
.probe = imx185_probe,
.remove = imx185_remove,
.id_table = imx185_id,
};
module_i2c_driver(imx185_i2c_driver);
MODULE_DESCRIPTION("Media Controller driver for Sony IMX185");
MODULE_AUTHOR("NVIDIA Corporation");
MODULE_LICENSE("GPL v2");