tegrakernel/kernel/nvidia/drivers/net/wireless/realtek/rtl8822bu/include/autoconf.h

344 lines
8.8 KiB
C
Raw Permalink Normal View History

2022-02-16 09:13:02 -06:00
/******************************************************************************
*
* Copyright(c) 2015 - 2017 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*****************************************************************************/
#define CONFIG_SINGLE_IMG
/* #define CONFIG_DISABLE_ODM */
/*
* Public General Config
*/
#define AUTOCONF_INCLUDED
#define RTL871X_MODULE_NAME "88x2BU"
#define DRV_NAME "rtl88x2bu"
/* Set CONFIG_RTL8822B from Makefile */
#ifndef CONFIG_RTL8822B
#define CONFIG_RTL8822B
#endif
#define CONFIG_USB_HCI 1
#define PLATFORM_LINUX 1
/*
* Wi-Fi Functions Config
*/
#define CONFIG_80211N_HT
#define CONFIG_80211AC_VHT
#ifdef CONFIG_80211AC_VHT
#ifndef CONFIG_80211N_HT
#define CONFIG_80211N_HT
#endif
#endif
#ifdef CONFIG_80211AC_VHT
#define CONFIG_BEAMFORMING
#endif
/* set CONFIG_IOCTL_CFG80211 from Makefile */
#ifdef CONFIG_IOCTL_CFG80211
/*
* Indecate new sta asoc through cfg80211_new_sta
* If kernel version >= 3.2 or
* version < 3.2 but already apply cfg80211 patch,
* RTW_USE_CFG80211_STA_EVENT must be defiend!
*/
/* Set RTW_USE_CFG80211_STA_EVENT from Makefile */
/* #define RTW_USE_CFG80211_STA_EVENT */ /* Indecate new sta asoc through cfg80211_new_sta */
#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
/* #define CONFIG_DEBUG_CFG80211 */
/* #define CONFIG_DRV_ISSUE_PROV_REQ */ /* IOT FOR S2 */
#define CONFIG_SET_SCAN_DENY_TIMER
#endif
/*
* Internal General Config
*/
/* #define CONFIG_H2CLBK */
#define RTW_HALMAC /* Use HALMAC architecture, necessary for 8822B */
#define CONFIG_EMBEDDED_FWIMG 1
#if (CONFIG_EMBEDDED_FWIMG==1)
#define LOAD_FW_HEADER_FROM_DRIVER
#endif
/* #define CONFIG_FILE_FWIMG */
#define CONFIG_XMIT_ACK
#ifdef CONFIG_XMIT_ACK
#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
#endif
#define CONFIG_RECV_REORDERING_CTRL 1
/* #define CONFIG_SUPPORT_USB_INT */
#ifdef CONFIG_SUPPORT_USB_INT
/* #define CONFIG_USB_INTERRUPT_IN_PIPE 1 */
#endif /* CONFIG_SUPPORT_USB_INT */
#ifdef CONFIG_POWER_SAVING
#define CONFIG_IPS 1
#ifdef CONFIG_IPS
/* #define CONFIG_IPS_LEVEL_2 1*/ /*enable this to set default IPS mode to IPS_LEVEL_2*/
#define CONFIG_IPS_CHECK_IN_WD /* Do IPS Check in WatchDog. */
/* #define CONFIG_FWLPS_IN_IPS */
#endif
/* #define SUPPORT_HW_RFOFF_DETECTED 1 */
#define CONFIG_LPS 1
#if defined(CONFIG_LPS)
#define CONFIG_LPS_LCLK 1
#endif
#ifdef CONFIG_LPS_LCLK
#ifdef CONFIG_POWER_SAVING
/* #define CONFIG_XMIT_THREAD_MODE */
#endif /* CONFIG_POWER_SAVING */
#ifndef CONFIG_SUPPORT_USB_INT
#define LPS_RPWM_WAIT_MS 300
#define CONFIG_DETECT_CPWM_BY_POLLING
#endif /* !CONFIG_SUPPORT_USB_INT */
/* #define DBG_CHECK_FW_PS_STATE */
#endif /* CONFIG_LPS_LCLK */
#ifdef CONFIG_LPS
#define CONFIG_WMMPS_STA 1
#endif /* CONFIG_LPS */
#endif /*CONFIG_POWER_SAVING*/
/* before link */
/* #define CONFIG_ANTENNA_DIVERSITY */
/* after link */
#ifdef CONFIG_ANTENNA_DIVERSITY
#define CONFIG_HW_ANTENNA_DIVERSITY
#endif
/*#else*/ /* CONFIG_MP_INCLUDED */
/*#endif*/ /* CONFIG_MP_INCLUDED */
#define CONFIG_AP_MODE 1
#ifdef CONFIG_AP_MODE
/* #define CONFIG_INTERRUPT_BASED_TXBCN */ /* Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs */
#if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN)
#undef CONFIG_INTERRUPT_BASED_TXBCN
#endif
#ifdef CONFIG_INTERRUPT_BASED_TXBCN
/* #define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT */
#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
#endif
#define CONFIG_NATIVEAP_MLME
#ifndef CONFIG_NATIVEAP_MLME
#define CONFIG_HOSTAPD_MLME 1
#endif
#define CONFIG_FIND_BEST_CHANNEL 1
#endif
#define CONFIG_P2P 1
#ifdef CONFIG_P2P
/* The CONFIG_WFD is for supporting the Wi-Fi display */
#define CONFIG_WFD
#define CONFIG_P2P_REMOVE_GROUP_INFO
/* #define CONFIG_DBG_P2P */
#define CONFIG_P2P_PS
/* #define CONFIG_P2P_IPS */
#define CONFIG_P2P_OP_CHK_SOCIAL_CH
#define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */
/*#define CONFIG_P2P_INVITE_IOT*/
#endif
/* Added by Kurt 20110511 */
#ifdef CONFIG_TDLS
#define CONFIG_TDLS_DRIVER_SETUP
/*
#ifndef CONFIG_WFD
#define CONFIG_WFD
#endif
*/
/* #define CONFIG_TDLS_AUTOSETUP */
#define CONFIG_TDLS_AUTOCHECKALIVE
#define CONFIG_TDLS_CH_SW /* Enable "CONFIG_TDLS_CH_SW" by default, however limit it to only work in wifi logo test mode but not in normal mode currently */
#endif
#define CONFIG_SKB_COPY 1 /* amsdu */
#define CONFIG_RTW_LED
#ifdef CONFIG_RTW_LED
#define CONFIG_RTW_SW_LED
#ifdef CONFIG_RTW_SW_LED
/* #define CONFIG_RTW_LED_HANDLED_BY_CMD_THREAD */
#endif
#endif /* CONFIG_RTW_LED */
#define USB_INTERFERENCE_ISSUE /* this should be checked in all usb interface */
#define CONFIG_GLOBAL_UI_PID
/*#define CONFIG_RTW_80211K*/
#define CONFIG_LAYER2_ROAMING
#define CONFIG_LAYER2_ROAMING_RESUME
/*#define CONFIG_ADAPTOR_INFO_CACHING_FILE */ /* now just applied on 8192cu only, should make it general... */
/*#define CONFIG_RESUME_IN_WORKQUEUE */
/*#define CONFIG_SET_SCAN_DENY_TIMER */
#define CONFIG_LONG_DELAY_ISSUE
#define CONFIG_NEW_SIGNAL_STAT_PROCESS
/* #define CONFIG_SIGNAL_DISPLAY_DBM */ /*display RX signal with dbm */
#ifdef CONFIG_SIGNAL_DISPLAY_DBM
/* #define CONFIG_BACKGROUND_NOISE_MONITOR */
#endif
#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
/*
* Interface Related Config
*/
#ifndef CONFIG_MINIMAL_MEMORY_USAGE
#define CONFIG_USB_TX_AGGREGATION 1
#define CONFIG_USB_RX_AGGREGATION 1
#endif
/* #define CONFIG_REDUCE_USB_TX_INT 1 */ /* Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. */
/* #define CONFIG_EASY_REPLACEMENT 1 */
/*
* CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now!
*/
/* #define CONFIG_USE_USB_BUFFER_ALLOC_TX 1 */ /* Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. */
/* #define CONFIG_USE_USB_BUFFER_ALLOC_RX 1 */ /* For RX path */
#ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
#else
#define CONFIG_PREALLOC_RECV_SKB
#ifdef CONFIG_PREALLOC_RECV_SKB
/* #define CONFIG_FIX_NR_BULKIN_BUFFER */ /* only use PREALLOC_RECV_SKB buffer, don't alloc skb at runtime */
#endif
#endif
/*
* USB VENDOR REQ BUFFER ALLOCATION METHOD
* if not set we'll use function local variable (stack memory)
*/
/* #define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE */
#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
#define CONFIG_USB_VENDOR_REQ_MUTEX
#define CONFIG_VENDOR_REQ_RETRY
/* #define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ 1 */
/*
* HAL Related Config
*/
#define RTL8812A_RX_PACKET_INCLUDE_CRC 0
#define CONFIG_RX_PACKET_APPEND_FCS
/* #define CONFIG_ONLY_ONE_OUT_EP_TO_LOW 0 */
#define CONFIG_OUT_EP_WIFI_MODE 0
#define ENABLE_USB_DROP_INCORRECT_OUT
#define CONFIG_ADHOC_WORKAROUND_SETTING 1
#define ENABLE_NEW_RFE_TYPE 0
#define DISABLE_BB_RF 0
#ifdef CONFIG_MP_INCLUDED
#define MP_DRIVER 1
#define CONFIG_MP_IWPRIV_SUPPORT 1
/*
#undef CONFIG_USB_TX_AGGREGATION
#undef CONFIG_USB_RX_AGGREGATION
*/
#else
#define MP_DRIVER 0
#endif
/*
* Platform Related Config
*/
#if defined(CONFIG_PLATFORM_ACTIONS_ATM702X)
#ifdef CONFIG_USB_TX_AGGREGATION
#undef CONFIG_USB_TX_AGGREGATION
#endif
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
#define CONFIG_USE_USB_BUFFER_ALLOC_TX
#endif
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_RX
#define CONFIG_USE_USB_BUFFER_ALLOC_RX
#endif
#endif
#ifdef CONFIG_BT_COEXIST
/* for ODM and outsrc BT-Coex */
#ifndef CONFIG_LPS
#define CONFIG_LPS /* download reserved page to FW */
#endif
#endif /* !CONFIG_BT_COEXIST */
#ifdef CONFIG_USB_TX_AGGREGATION
/* #define CONFIG_TX_EARLY_MODE */
#endif
#define RTL8188E_EARLY_MODE_PKT_NUM_10 0
/*#define CONFIG_CUSTOMER01_SMART_ANTENNA */
/*
* Debug Related Config
*/
#define DBG 1
#define DBG_CONFIG_ERROR_DETECT
/* #define CONFIG_DIS_UPHY */
/*
#define DBG_CONFIG_ERROR_DETECT_INT
#define DBG_CONFIG_ERROR_RESET
#define DBG_IO
#define DBG_DELAY_OS
#define DBG_MEM_ALLOC
#define DBG_IOCTL
#define DBG_TX
#define DBG_XMIT_BUF
#define DBG_XMIT_BUF_EXT
#define DBG_TX_DROP_FRAME
#define DBG_RX_DROP_FRAME
#define DBG_RX_SEQ
#define DBG_RX_SIGNAL_DISPLAY_PROCESSING
#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"
#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
#define DBG_ROAMING_TEST
#define DBG_HAL_INIT_PROFILING
#define DBG_MEMORY_LEAK 1
*/
/*#define DBG_FW_DEBUG_MSG_PKT*/ /* FW use this feature to tx debug broadcast pkt. This pkt include FW debug message*/