32 lines
1019 B
Plaintext
32 lines
1019 B
Plaintext
|
Murata ZPA2326 pressure sensor
|
||
|
|
|
||
|
|
Pressure sensor from Murata with SPI and I2C bus interfaces.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: "murata,zpa2326"
|
||
|
|
- reg: the I2C address or SPI chip select the device will respond to
|
||
|
|
|
||
|
|
Recommended properties for SPI bus usage:
|
||
|
|
- spi-max-frequency: maximum SPI bus frequency as documented in
|
||
|
|
Documentation/devicetree/bindings/spi/spi-bus.txt
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- vref-supply: an optional regulator that needs to be on to provide VREF
|
||
|
|
power to the sensor
|
||
|
|
- vdd-supply: an optional regulator that needs to be on to provide VDD
|
||
|
|
power to the sensor
|
||
|
|
- interrupt-parent: phandle to the parent interrupt controller as documented in
|
||
|
|
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
||
|
|
- interrupts: interrupt mapping for IRQ as documented in
|
||
|
|
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
zpa2326@5c {
|
||
|
|
compatible = "murata,zpa2326";
|
||
|
|
reg = <0x5c>;
|
||
|
|
interrupt-parent = <&gpio>;
|
||
|
|
interrupts = <12>;
|
||
|
|
vdd-supply = <&ldo_1v8_gnss>;
|
||
|
|
};
|