99 lines
2.3 KiB
Plaintext
99 lines
2.3 KiB
Plaintext
|
Qualcomm PM8xxx PMIC multi-function devices
|
||
|
|
|
||
|
|
The PM8xxx family of Power Management ICs are used to provide regulated
|
||
|
|
voltages and other various functionality to Qualcomm SoCs.
|
||
|
|
|
||
|
|
= PROPERTIES
|
||
|
|
|
||
|
|
- compatible:
|
||
|
|
Usage: required
|
||
|
|
Value type: <string>
|
||
|
|
Definition: must be one of:
|
||
|
|
"qcom,pm8058"
|
||
|
|
"qcom,pm8921"
|
||
|
|
|
||
|
|
- #address-cells:
|
||
|
|
Usage: required
|
||
|
|
Value type: <u32>
|
||
|
|
Definition: must be 1
|
||
|
|
|
||
|
|
- #size-cells:
|
||
|
|
Usage: required
|
||
|
|
Value type: <u32>
|
||
|
|
Definition: must be 0
|
||
|
|
|
||
|
|
- interrupts:
|
||
|
|
Usage: required
|
||
|
|
Value type: <prop-encoded-array>
|
||
|
|
Definition: specifies the interrupt that indicates a subdevice
|
||
|
|
has generated an interrupt (summary interrupt). The
|
||
|
|
format of the specifier is defined by the binding document
|
||
|
|
describing the node's interrupt parent.
|
||
|
|
|
||
|
|
- #interrupt-cells:
|
||
|
|
Usage: required
|
||
|
|
Value type : <u32>
|
||
|
|
Definition: must be 2. Specifies the number of cells needed to encode
|
||
|
|
an interrupt source. The 1st cell contains the interrupt
|
||
|
|
number. The 2nd cell is the trigger type and level flags
|
||
|
|
encoded as follows:
|
||
|
|
|
||
|
|
1 = low-to-high edge triggered
|
||
|
|
2 = high-to-low edge triggered
|
||
|
|
4 = active high level-sensitive
|
||
|
|
8 = active low level-sensitive
|
||
|
|
|
||
|
|
- interrupt-controller:
|
||
|
|
Usage: required
|
||
|
|
Value type: <empty>
|
||
|
|
Definition: identifies this node as an interrupt controller
|
||
|
|
|
||
|
|
= SUBCOMPONENTS
|
||
|
|
|
||
|
|
The PMIC contains multiple independent functions, each described in a subnode.
|
||
|
|
The below bindings specify the set of valid subnodes.
|
||
|
|
|
||
|
|
== Real-Time Clock
|
||
|
|
|
||
|
|
- compatible:
|
||
|
|
Usage: required
|
||
|
|
Value type: <string>
|
||
|
|
Definition: must be one of:
|
||
|
|
"qcom,pm8058-rtc"
|
||
|
|
"qcom,pm8921-rtc"
|
||
|
|
"qcom,pm8941-rtc"
|
||
|
|
"qcom,pm8018-rtc"
|
||
|
|
|
||
|
|
- reg:
|
||
|
|
Usage: required
|
||
|
|
Value type: <prop-encoded-array>
|
||
|
|
Definition: single entry specifying the base address of the RTC registers
|
||
|
|
|
||
|
|
- interrupts:
|
||
|
|
Usage: required
|
||
|
|
Value type: <prop-encoded-array>
|
||
|
|
Definition: single entry specifying the RTC's alarm interrupt
|
||
|
|
|
||
|
|
- allow-set-time:
|
||
|
|
Usage: optional
|
||
|
|
Value type: <empty>
|
||
|
|
Definition: indicates that the setting of RTC time is allowed by
|
||
|
|
the host CPU
|
||
|
|
|
||
|
|
= EXAMPLE
|
||
|
|
|
||
|
|
pmicintc: pmic@0 {
|
||
|
|
compatible = "qcom,pm8921";
|
||
|
|
interrupts = <104 8>;
|
||
|
|
#interrupt-cells = <2>;
|
||
|
|
interrupt-controller;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
rtc@11d {
|
||
|
|
compatible = "qcom,pm8921-rtc";
|
||
|
|
reg = <0x11d>;
|
||
|
|
interrupts = <0x27 0>;
|
||
|
|
};
|
||
|
|
};
|