36 lines
1.1 KiB
Plaintext
36 lines
1.1 KiB
Plaintext
|
Marvell DSA Switch Device Tree Bindings
|
||
|
|
---------------------------------------
|
||
|
|
|
||
|
|
WARNING: This binding is currently unstable. Do not program it into a
|
||
|
|
FLASH never to be changed again. Once this binding is stable, this
|
||
|
|
warning will be removed.
|
||
|
|
|
||
|
|
If you need a stable binding, use the old dsa.txt binding.
|
||
|
|
|
||
|
|
Marvell Switches are MDIO devices. The following properties should be
|
||
|
|
placed as a child node of an mdio device.
|
||
|
|
|
||
|
|
The properties described here are those specific to Marvell devices.
|
||
|
|
Additional required and optional properties can be found in dsa.txt.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible : Should be one of "marvell,mv88e6085",
|
||
|
|
- reg : Address on the MII bus for the switch.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
|
||
|
|
- reset-gpios : Should be a gpio specifier for a reset line
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
mdio {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
switch0: switch@0 {
|
||
|
|
compatible = "marvell,mv88e6085";
|
||
|
|
reg = <0>;
|
||
|
|
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
};
|