54 lines
1.7 KiB
Plaintext
54 lines
1.7 KiB
Plaintext
|
TI QSPI controller.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible : should be "ti,dra7xxx-qspi" or "ti,am4372-qspi".
|
||
|
|
- reg: Should contain QSPI registers location and length.
|
||
|
|
- reg-names: Should contain the resource reg names.
|
||
|
|
- qspi_base: Qspi configuration register Address space
|
||
|
|
- qspi_mmap: Memory mapped Address space
|
||
|
|
- (optional) qspi_ctrlmod: Control module Address space
|
||
|
|
- interrupts: should contain the qspi interrupt number.
|
||
|
|
- #address-cells, #size-cells : Must be present if the device has sub-nodes
|
||
|
|
- ti,hwmods: Name of the hwmod associated to the QSPI
|
||
|
|
|
||
|
|
Recommended properties:
|
||
|
|
- spi-max-frequency: Definition as per
|
||
|
|
Documentation/devicetree/bindings/spi/spi-bus.txt
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- syscon-chipselects: Handle to system control region contains QSPI
|
||
|
|
chipselect register and offset of that register.
|
||
|
|
|
||
|
|
NOTE: TI QSPI controller requires different pinmux and IODelay
|
||
|
|
parameters for Mode-0 and Mode-3 operations, which needs to be set up by
|
||
|
|
the bootloader (U-Boot). Default configuration only supports Mode-0
|
||
|
|
operation. Hence, "spi-cpol" and "spi-cpha" DT properties cannot be
|
||
|
|
specified in the slave nodes of TI QSPI controller without appropriate
|
||
|
|
modification to bootloader.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
For am4372:
|
||
|
|
qspi: qspi@4b300000 {
|
||
|
|
compatible = "ti,am4372-qspi";
|
||
|
|
reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
|
||
|
|
reg-names = "qspi_base", "qspi_mmap";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
spi-max-frequency = <25000000>;
|
||
|
|
ti,hwmods = "qspi";
|
||
|
|
};
|
||
|
|
|
||
|
|
For dra7xx:
|
||
|
|
qspi: qspi@4b300000 {
|
||
|
|
compatible = "ti,dra7xxx-qspi";
|
||
|
|
reg = <0x4b300000 0x100>,
|
||
|
|
<0x5c000000 0x4000000>,
|
||
|
|
reg-names = "qspi_base", "qspi_mmap";
|
||
|
|
syscon-chipselects = <&scm_conf 0x558>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
spi-max-frequency = <48000000>;
|
||
|
|
ti,hwmods = "qspi";
|
||
|
|
};
|