59 lines
2.2 KiB
Plaintext
59 lines
2.2 KiB
Plaintext
|
* Qualcomm Technologies Inc Universal Flash Storage (UFS) PHY
|
||
|
|
|
||
|
|
UFSPHY nodes are defined to describe on-chip UFS PHY hardware macro.
|
||
|
|
Each UFS PHY node should have its own node.
|
||
|
|
|
||
|
|
To bind UFS PHY with UFS host controller, the controller node should
|
||
|
|
contain a phandle reference to UFS PHY node.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm"
|
||
|
|
or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use.
|
||
|
|
- reg : should contain PHY register address space (mandatory),
|
||
|
|
- reg-names : indicates various resources passed to driver (via reg proptery) by name.
|
||
|
|
Required "reg-names" is "phy_mem".
|
||
|
|
- #phy-cells : This property shall be set to 0
|
||
|
|
- vdda-phy-supply : phandle to main PHY supply for analog domain
|
||
|
|
- vdda-pll-supply : phandle to PHY PLL and Power-Gen block power supply
|
||
|
|
- clocks : List of phandle and clock specifier pairs
|
||
|
|
- clock-names : List of clock input name strings sorted in the same
|
||
|
|
order as the clocks property. "ref_clk_src", "ref_clk",
|
||
|
|
"tx_iface_clk" & "rx_iface_clk" are mandatory but
|
||
|
|
"ref_clk_parent" is optional
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- vdda-phy-max-microamp : specifies max. load that can be drawn from phy supply
|
||
|
|
- vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
|
||
|
|
- vddp-ref-clk-supply : phandle to UFS device ref_clk pad power supply
|
||
|
|
- vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
|
||
|
|
- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
ufsphy1: ufsphy@0xfc597000 {
|
||
|
|
compatible = "qcom,ufs-phy-qmp-20nm";
|
||
|
|
reg = <0xfc597000 0x800>;
|
||
|
|
reg-names = "phy_mem";
|
||
|
|
#phy-cells = <0>;
|
||
|
|
vdda-phy-supply = <&pma8084_l4>;
|
||
|
|
vdda-pll-supply = <&pma8084_l12>;
|
||
|
|
vdda-phy-max-microamp = <50000>;
|
||
|
|
vdda-pll-max-microamp = <1000>;
|
||
|
|
clock-names = "ref_clk_src",
|
||
|
|
"ref_clk_parent",
|
||
|
|
"ref_clk",
|
||
|
|
"tx_iface_clk",
|
||
|
|
"rx_iface_clk";
|
||
|
|
clocks = <&clock_rpm clk_ln_bb_clk>,
|
||
|
|
<&clock_gcc clk_pcie_1_phy_ldo >,
|
||
|
|
<&clock_gcc clk_ufs_phy_ldo>,
|
||
|
|
<&clock_gcc clk_gcc_ufs_tx_cfg_clk>,
|
||
|
|
<&clock_gcc clk_gcc_ufs_rx_cfg_clk>;
|
||
|
|
};
|
||
|
|
|
||
|
|
ufshc@0xfc598000 {
|
||
|
|
...
|
||
|
|
phys = <&ufsphy1>;
|
||
|
|
phy-names = "ufsphy";
|
||
|
|
};
|