60 lines
1.9 KiB
Plaintext
60 lines
1.9 KiB
Plaintext
|
Rockchip SuperSpeed DWC3 USB SoC controller
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: should contain "rockchip,rk3399-dwc3" for rk3399 SoC
|
||
|
|
- clocks: A list of phandle + clock-specifier pairs for the
|
||
|
|
clocks listed in clock-names
|
||
|
|
- clock-names: Should contain the following:
|
||
|
|
"ref_clk" Controller reference clk, have to be 24 MHz
|
||
|
|
"suspend_clk" Controller suspend clk, have to be 24 MHz or 32 KHz
|
||
|
|
"bus_clk" Master/Core clock, have to be >= 62.5 MHz for SS
|
||
|
|
operation and >= 30MHz for HS operation
|
||
|
|
"grf_clk" Controller grf clk
|
||
|
|
|
||
|
|
Required child node:
|
||
|
|
A child node must exist to represent the core DWC3 IP block. The name of
|
||
|
|
the node is not important. The content of the node is defined in dwc3.txt.
|
||
|
|
|
||
|
|
Phy documentation is provided in the following places:
|
||
|
|
Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
|
||
|
|
|
||
|
|
Example device nodes:
|
||
|
|
|
||
|
|
usbdrd3_0: usb@fe800000 {
|
||
|
|
compatible = "rockchip,rk3399-dwc3";
|
||
|
|
clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
|
||
|
|
<&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>;
|
||
|
|
clock-names = "ref_clk", "suspend_clk",
|
||
|
|
"bus_clk", "grf_clk";
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <2>;
|
||
|
|
ranges;
|
||
|
|
status = "disabled";
|
||
|
|
usbdrd_dwc3_0: dwc3@fe800000 {
|
||
|
|
compatible = "snps,dwc3";
|
||
|
|
reg = <0x0 0xfe800000 0x0 0x100000>;
|
||
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
dr_mode = "otg";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
usbdrd3_1: usb@fe900000 {
|
||
|
|
compatible = "rockchip,rk3399-dwc3";
|
||
|
|
clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
|
||
|
|
<&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>;
|
||
|
|
clock-names = "ref_clk", "suspend_clk",
|
||
|
|
"bus_clk", "grf_clk";
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <2>;
|
||
|
|
ranges;
|
||
|
|
status = "disabled";
|
||
|
|
usbdrd_dwc3_1: dwc3@fe900000 {
|
||
|
|
compatible = "snps,dwc3";
|
||
|
|
reg = <0x0 0xfe900000 0x0 0x100000>;
|
||
|
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
dr_mode = "otg";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|