244 lines
9.3 KiB
Plaintext
244 lines
9.3 KiB
Plaintext
|
AdvanSys (Advanced System Products, Inc.) manufactures the following
|
||
|
|
RISC-based, Bus-Mastering, Fast (10 Mhz) and Ultra (20 Mhz) Narrow
|
||
|
|
(8-bit transfer) SCSI Host Adapters for the ISA, EISA, VL, and PCI
|
||
|
|
buses and RISC-based, Bus-Mastering, Ultra (20 Mhz) Wide (16-bit
|
||
|
|
transfer) SCSI Host Adapters for the PCI bus.
|
||
|
|
|
||
|
|
The CDB counts below indicate the number of SCSI CDB (Command
|
||
|
|
Descriptor Block) requests that can be stored in the RISC chip
|
||
|
|
cache and board LRAM. A CDB is a single SCSI command. The driver
|
||
|
|
detect routine will display the number of CDBs available for each
|
||
|
|
adapter detected. The number of CDBs used by the driver can be
|
||
|
|
lowered in the BIOS by changing the 'Host Queue Size' adapter setting.
|
||
|
|
|
||
|
|
Laptop Products:
|
||
|
|
ABP-480 - Bus-Master CardBus (16 CDB)
|
||
|
|
|
||
|
|
Connectivity Products:
|
||
|
|
ABP510/5150 - Bus-Master ISA (240 CDB)
|
||
|
|
ABP5140 - Bus-Master ISA PnP (16 CDB)
|
||
|
|
ABP5142 - Bus-Master ISA PnP with floppy (16 CDB)
|
||
|
|
ABP902/3902 - Bus-Master PCI (16 CDB)
|
||
|
|
ABP3905 - Bus-Master PCI (16 CDB)
|
||
|
|
ABP915 - Bus-Master PCI (16 CDB)
|
||
|
|
ABP920 - Bus-Master PCI (16 CDB)
|
||
|
|
ABP3922 - Bus-Master PCI (16 CDB)
|
||
|
|
ABP3925 - Bus-Master PCI (16 CDB)
|
||
|
|
ABP930 - Bus-Master PCI (16 CDB)
|
||
|
|
ABP930U - Bus-Master PCI Ultra (16 CDB)
|
||
|
|
ABP930UA - Bus-Master PCI Ultra (16 CDB)
|
||
|
|
ABP960 - Bus-Master PCI MAC/PC (16 CDB)
|
||
|
|
ABP960U - Bus-Master PCI MAC/PC Ultra (16 CDB)
|
||
|
|
|
||
|
|
Single Channel Products:
|
||
|
|
ABP542 - Bus-Master ISA with floppy (240 CDB)
|
||
|
|
ABP742 - Bus-Master EISA (240 CDB)
|
||
|
|
ABP842 - Bus-Master VL (240 CDB)
|
||
|
|
ABP940 - Bus-Master PCI (240 CDB)
|
||
|
|
ABP940U - Bus-Master PCI Ultra (240 CDB)
|
||
|
|
ABP940UA/3940UA - Bus-Master PCI Ultra (240 CDB)
|
||
|
|
ABP970 - Bus-Master PCI MAC/PC (240 CDB)
|
||
|
|
ABP970U - Bus-Master PCI MAC/PC Ultra (240 CDB)
|
||
|
|
ABP3960UA - Bus-Master PCI MAC/PC Ultra (240 CDB)
|
||
|
|
ABP940UW/3940UW - Bus-Master PCI Ultra-Wide (253 CDB)
|
||
|
|
ABP970UW - Bus-Master PCI MAC/PC Ultra-Wide (253 CDB)
|
||
|
|
ABP3940U2W - Bus-Master PCI LVD/Ultra2-Wide (253 CDB)
|
||
|
|
|
||
|
|
Multi-Channel Products:
|
||
|
|
ABP752 - Dual Channel Bus-Master EISA (240 CDB Per Channel)
|
||
|
|
ABP852 - Dual Channel Bus-Master VL (240 CDB Per Channel)
|
||
|
|
ABP950 - Dual Channel Bus-Master PCI (240 CDB Per Channel)
|
||
|
|
ABP950UW - Dual Channel Bus-Master PCI Ultra-Wide (253 CDB Per Channel)
|
||
|
|
ABP980 - Four Channel Bus-Master PCI (240 CDB Per Channel)
|
||
|
|
ABP980U - Four Channel Bus-Master PCI Ultra (240 CDB Per Channel)
|
||
|
|
ABP980UA/3980UA - Four Channel Bus-Master PCI Ultra (16 CDB Per Chan.)
|
||
|
|
ABP3950U2W - Bus-Master PCI LVD/Ultra2-Wide and Ultra-Wide (253 CDB)
|
||
|
|
ABP3950U3W - Bus-Master PCI Dual LVD2/Ultra3-Wide (253 CDB)
|
||
|
|
|
||
|
|
Driver Compile Time Options and Debugging
|
||
|
|
|
||
|
|
The following constants can be defined in the source file.
|
||
|
|
|
||
|
|
1. ADVANSYS_ASSERT - Enable driver assertions (Def: Enabled)
|
||
|
|
|
||
|
|
Enabling this option adds assertion logic statements to the
|
||
|
|
driver. If an assertion fails a message will be displayed to
|
||
|
|
the console, but the system will continue to operate. Any
|
||
|
|
assertions encountered should be reported to the person
|
||
|
|
responsible for the driver. Assertion statements may proactively
|
||
|
|
detect problems with the driver and facilitate fixing these
|
||
|
|
problems. Enabling assertions will add a small overhead to the
|
||
|
|
execution of the driver.
|
||
|
|
|
||
|
|
2. ADVANSYS_DEBUG - Enable driver debugging (Def: Disabled)
|
||
|
|
|
||
|
|
Enabling this option adds tracing functions to the driver and the
|
||
|
|
ability to set a driver tracing level at boot time. This option is
|
||
|
|
very useful for debugging the driver, but it will add to the size
|
||
|
|
of the driver execution image and add overhead to the execution of
|
||
|
|
the driver.
|
||
|
|
|
||
|
|
The amount of debugging output can be controlled with the global
|
||
|
|
variable 'asc_dbglvl'. The higher the number the more output. By
|
||
|
|
default the debug level is 0.
|
||
|
|
|
||
|
|
If the driver is loaded at boot time and the LILO Driver Option
|
||
|
|
is included in the system, the debug level can be changed by
|
||
|
|
specifying a 5th (ASC_NUM_IOPORT_PROBE + 1) I/O Port. The
|
||
|
|
first three hex digits of the pseudo I/O Port must be set to
|
||
|
|
'deb' and the fourth hex digit specifies the debug level: 0 - F.
|
||
|
|
The following command line will look for an adapter at 0x330
|
||
|
|
and set the debug level to 2.
|
||
|
|
|
||
|
|
linux advansys=0x330,0,0,0,0xdeb2
|
||
|
|
|
||
|
|
If the driver is built as a loadable module this variable can be
|
||
|
|
defined when the driver is loaded. The following insmod command
|
||
|
|
will set the debug level to one.
|
||
|
|
|
||
|
|
insmod advansys.o asc_dbglvl=1
|
||
|
|
|
||
|
|
Debugging Message Levels:
|
||
|
|
0: Errors Only
|
||
|
|
1: High-Level Tracing
|
||
|
|
2-N: Verbose Tracing
|
||
|
|
|
||
|
|
To enable debug output to console, please make sure that:
|
||
|
|
|
||
|
|
a. System and kernel logging is enabled (syslogd, klogd running).
|
||
|
|
b. Kernel messages are routed to console output. Check
|
||
|
|
/etc/syslog.conf for an entry similar to this:
|
||
|
|
|
||
|
|
kern.* /dev/console
|
||
|
|
|
||
|
|
c. klogd is started with the appropriate -c parameter
|
||
|
|
(e.g. klogd -c 8)
|
||
|
|
|
||
|
|
This will cause printk() messages to be be displayed on the
|
||
|
|
current console. Refer to the klogd(8) and syslogd(8) man pages
|
||
|
|
for details.
|
||
|
|
|
||
|
|
Alternatively you can enable printk() to console with this
|
||
|
|
program. However, this is not the 'official' way to do this.
|
||
|
|
Debug output is logged in /var/log/messages.
|
||
|
|
|
||
|
|
main()
|
||
|
|
{
|
||
|
|
syscall(103, 7, 0, 0);
|
||
|
|
}
|
||
|
|
|
||
|
|
Increasing LOG_BUF_LEN in kernel/printk.c to something like
|
||
|
|
40960 allows more debug messages to be buffered in the kernel
|
||
|
|
and written to the console or log file.
|
||
|
|
|
||
|
|
3. ADVANSYS_STATS - Enable statistics (Def: Enabled)
|
||
|
|
|
||
|
|
Enabling this option adds statistics collection and display
|
||
|
|
through /proc to the driver. The information is useful for
|
||
|
|
monitoring driver and device performance. It will add to the
|
||
|
|
size of the driver execution image and add minor overhead to
|
||
|
|
the execution of the driver.
|
||
|
|
|
||
|
|
Statistics are maintained on a per adapter basis. Driver entry
|
||
|
|
point call counts and transfer size counts are maintained.
|
||
|
|
Statistics are only available for kernels greater than or equal
|
||
|
|
to v1.3.0 with the CONFIG_PROC_FS (/proc) file system configured.
|
||
|
|
|
||
|
|
AdvanSys SCSI adapter files have the following path name format:
|
||
|
|
|
||
|
|
/proc/scsi/advansys/{0,1,2,3,...}
|
||
|
|
|
||
|
|
This information can be displayed with cat. For example:
|
||
|
|
|
||
|
|
cat /proc/scsi/advansys/0
|
||
|
|
|
||
|
|
When ADVANSYS_STATS is not defined the AdvanSys /proc files only
|
||
|
|
contain adapter and device configuration information.
|
||
|
|
|
||
|
|
Driver LILO Option
|
||
|
|
|
||
|
|
If init/main.c is modified as described in the 'Directions for Adding
|
||
|
|
the AdvanSys Driver to Linux' section (B.4.) above, the driver will
|
||
|
|
recognize the 'advansys' LILO command line and /etc/lilo.conf option.
|
||
|
|
This option can be used to either disable I/O port scanning or to limit
|
||
|
|
scanning to 1 - 4 I/O ports. Regardless of the option setting EISA and
|
||
|
|
PCI boards will still be searched for and detected. This option only
|
||
|
|
affects searching for ISA and VL boards.
|
||
|
|
|
||
|
|
Examples:
|
||
|
|
1. Eliminate I/O port scanning:
|
||
|
|
boot: linux advansys=
|
||
|
|
or
|
||
|
|
boot: linux advansys=0x0
|
||
|
|
2. Limit I/O port scanning to one I/O port:
|
||
|
|
boot: linux advansys=0x110
|
||
|
|
3. Limit I/O port scanning to four I/O ports:
|
||
|
|
boot: linux advansys=0x110,0x210,0x230,0x330
|
||
|
|
|
||
|
|
For a loadable module the same effect can be achieved by setting
|
||
|
|
the 'asc_iopflag' variable and 'asc_ioport' array when loading
|
||
|
|
the driver, e.g.
|
||
|
|
|
||
|
|
insmod advansys.o asc_iopflag=1 asc_ioport=0x110,0x330
|
||
|
|
|
||
|
|
If ADVANSYS_DEBUG is defined a 5th (ASC_NUM_IOPORT_PROBE + 1)
|
||
|
|
I/O Port may be added to specify the driver debug level. Refer to
|
||
|
|
the 'Driver Compile Time Options and Debugging' section above for
|
||
|
|
more information.
|
||
|
|
|
||
|
|
Credits (Chronological Order)
|
||
|
|
|
||
|
|
Bob Frey <bfrey@turbolinux.com.cn> wrote the AdvanSys SCSI driver
|
||
|
|
and maintained it up to 3.3F. He continues to answer questions
|
||
|
|
and help maintain the driver.
|
||
|
|
|
||
|
|
Nathan Hartwell <mage@cdc3.cdc.net> provided the directions and
|
||
|
|
basis for the Linux v1.3.X changes which were included in the
|
||
|
|
1.2 release.
|
||
|
|
|
||
|
|
Thomas E Zerucha <zerucha@shell.portal.com> pointed out a bug
|
||
|
|
in advansys_biosparam() which was fixed in the 1.3 release.
|
||
|
|
|
||
|
|
Erik Ratcliffe <erik@caldera.com> has done testing of the
|
||
|
|
AdvanSys driver in the Caldera releases.
|
||
|
|
|
||
|
|
Rik van Riel <H.H.vanRiel@fys.ruu.nl> provided a patch to
|
||
|
|
AscWaitTixISRDone() which he found necessary to make the
|
||
|
|
driver work with a SCSI-1 disk.
|
||
|
|
|
||
|
|
Mark Moran <mmoran@mmoran.com> has helped test Ultra-Wide
|
||
|
|
support in the 3.1A driver.
|
||
|
|
|
||
|
|
Doug Gilbert <dgilbert@interlog.com> has made changes and
|
||
|
|
suggestions to improve the driver and done a lot of testing.
|
||
|
|
|
||
|
|
Ken Mort <ken@mort.net> reported a DEBUG compile bug fixed
|
||
|
|
in 3.2K.
|
||
|
|
|
||
|
|
Tom Rini <trini@kernel.crashing.org> provided the CONFIG_ISA
|
||
|
|
patch and helped with PowerPC wide and narrow board support.
|
||
|
|
|
||
|
|
Philip Blundell <philb@gnu.org> provided an
|
||
|
|
advansys_interrupts_enabled patch.
|
||
|
|
|
||
|
|
Dave Jones <dave@denial.force9.co.uk> reported the compiler
|
||
|
|
warnings generated when CONFIG_PROC_FS was not defined in
|
||
|
|
the 3.2M driver.
|
||
|
|
|
||
|
|
Jerry Quinn <jlquinn@us.ibm.com> fixed PowerPC support (endian
|
||
|
|
problems) for wide cards.
|
||
|
|
|
||
|
|
Bryan Henderson <bryanh@giraffe-data.com> helped debug narrow
|
||
|
|
card error handling.
|
||
|
|
|
||
|
|
Manuel Veloso <veloso@pobox.com> worked hard on PowerPC narrow
|
||
|
|
board support and fixed a bug in AscGetEEPConfig().
|
||
|
|
|
||
|
|
Arnaldo Carvalho de Melo <acme@conectiva.com.br> made
|
||
|
|
save_flags/restore_flags changes.
|
||
|
|
|
||
|
|
Andy Kellner <AKellner@connectcom.net> continued the Advansys SCSI
|
||
|
|
driver development for ConnectCom (Version > 3.3F).
|
||
|
|
|
||
|
|
Ken Witherow for extensive testing during the development of version 3.4.
|