614 lines
14 KiB
C
614 lines
14 KiB
C
|
/*
|
||
|
* Panasonic MN88472 DVB-T/T2/C demodulator driver
|
||
|
*
|
||
|
* Copyright (C) 2013 Antti Palosaari <crope@iki.fi>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License as published by
|
||
|
* the Free Software Foundation; either version 2 of the License, or
|
||
|
* (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*/
|
||
|
|
||
|
#include "mn88472_priv.h"
|
||
|
|
||
|
static int mn88472_get_tune_settings(struct dvb_frontend *fe,
|
||
|
struct dvb_frontend_tune_settings *s)
|
||
|
{
|
||
|
s->min_delay_ms = 1000;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int mn88472_read_status(struct dvb_frontend *fe, enum fe_status *status)
|
||
|
{
|
||
|
struct i2c_client *client = fe->demodulator_priv;
|
||
|
struct mn88472_dev *dev = i2c_get_clientdata(client);
|
||
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
||
|
int ret;
|
||
|
unsigned int utmp;
|
||
|
|
||
|
if (!dev->active) {
|
||
|
ret = -EAGAIN;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
switch (c->delivery_system) {
|
||
|
case SYS_DVBT:
|
||
|
ret = regmap_read(dev->regmap[0], 0x7f, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
if ((utmp & 0x0f) >= 0x09)
|
||
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
||
|
FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
|
||
|
else
|
||
|
*status = 0;
|
||
|
break;
|
||
|
case SYS_DVBT2:
|
||
|
ret = regmap_read(dev->regmap[2], 0x92, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
if ((utmp & 0x0f) >= 0x0d)
|
||
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
||
|
FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
|
||
|
else if ((utmp & 0x0f) >= 0x0a)
|
||
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
||
|
FE_HAS_VITERBI;
|
||
|
else if ((utmp & 0x0f) >= 0x07)
|
||
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER;
|
||
|
else
|
||
|
*status = 0;
|
||
|
break;
|
||
|
case SYS_DVBC_ANNEX_A:
|
||
|
ret = regmap_read(dev->regmap[1], 0x84, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
if ((utmp & 0x0f) >= 0x08)
|
||
|
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
|
||
|
FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
|
||
|
else
|
||
|
*status = 0;
|
||
|
break;
|
||
|
default:
|
||
|
ret = -EINVAL;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int mn88472_set_frontend(struct dvb_frontend *fe)
|
||
|
{
|
||
|
struct i2c_client *client = fe->demodulator_priv;
|
||
|
struct mn88472_dev *dev = i2c_get_clientdata(client);
|
||
|
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
|
||
|
int ret, i;
|
||
|
unsigned int utmp;
|
||
|
u32 if_frequency;
|
||
|
u8 buf[3], delivery_system_val, bandwidth_val, *bandwidth_vals_ptr;
|
||
|
u8 reg_bank0_b4_val, reg_bank0_cd_val, reg_bank0_d4_val;
|
||
|
u8 reg_bank0_d6_val;
|
||
|
|
||
|
dev_dbg(&client->dev,
|
||
|
"delivery_system=%u modulation=%u frequency=%u bandwidth_hz=%u symbol_rate=%u inversion=%d stream_id=%d\n",
|
||
|
c->delivery_system, c->modulation, c->frequency,
|
||
|
c->bandwidth_hz, c->symbol_rate, c->inversion, c->stream_id);
|
||
|
|
||
|
if (!dev->active) {
|
||
|
ret = -EAGAIN;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
switch (c->delivery_system) {
|
||
|
case SYS_DVBT:
|
||
|
delivery_system_val = 0x02;
|
||
|
reg_bank0_b4_val = 0x00;
|
||
|
reg_bank0_cd_val = 0x1f;
|
||
|
reg_bank0_d4_val = 0x0a;
|
||
|
reg_bank0_d6_val = 0x48;
|
||
|
break;
|
||
|
case SYS_DVBT2:
|
||
|
delivery_system_val = 0x03;
|
||
|
reg_bank0_b4_val = 0xf6;
|
||
|
reg_bank0_cd_val = 0x01;
|
||
|
reg_bank0_d4_val = 0x09;
|
||
|
reg_bank0_d6_val = 0x46;
|
||
|
break;
|
||
|
case SYS_DVBC_ANNEX_A:
|
||
|
delivery_system_val = 0x04;
|
||
|
reg_bank0_b4_val = 0x00;
|
||
|
reg_bank0_cd_val = 0x17;
|
||
|
reg_bank0_d4_val = 0x09;
|
||
|
reg_bank0_d6_val = 0x48;
|
||
|
break;
|
||
|
default:
|
||
|
ret = -EINVAL;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
switch (c->delivery_system) {
|
||
|
case SYS_DVBT:
|
||
|
case SYS_DVBT2:
|
||
|
switch (c->bandwidth_hz) {
|
||
|
case 5000000:
|
||
|
bandwidth_vals_ptr = "\xe5\x99\x9a\x1b\xa9\x1b\xa9";
|
||
|
bandwidth_val = 0x03;
|
||
|
break;
|
||
|
case 6000000:
|
||
|
bandwidth_vals_ptr = "\xbf\x55\x55\x15\x6b\x15\x6b";
|
||
|
bandwidth_val = 0x02;
|
||
|
break;
|
||
|
case 7000000:
|
||
|
bandwidth_vals_ptr = "\xa4\x00\x00\x0f\x2c\x0f\x2c";
|
||
|
bandwidth_val = 0x01;
|
||
|
break;
|
||
|
case 8000000:
|
||
|
bandwidth_vals_ptr = "\x8f\x80\x00\x08\xee\x08\xee";
|
||
|
bandwidth_val = 0x00;
|
||
|
break;
|
||
|
default:
|
||
|
ret = -EINVAL;
|
||
|
goto err;
|
||
|
}
|
||
|
break;
|
||
|
case SYS_DVBC_ANNEX_A:
|
||
|
bandwidth_vals_ptr = NULL;
|
||
|
bandwidth_val = 0x00;
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Program tuner */
|
||
|
if (fe->ops.tuner_ops.set_params) {
|
||
|
ret = fe->ops.tuner_ops.set_params(fe);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
if (fe->ops.tuner_ops.get_if_frequency) {
|
||
|
ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
dev_dbg(&client->dev, "get_if_frequency=%d\n", if_frequency);
|
||
|
} else {
|
||
|
ret = -EINVAL;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
ret = regmap_write(dev->regmap[2], 0x00, 0x66);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[2], 0x01, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[2], 0x02, 0x01);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[2], 0x03, delivery_system_val);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[2], 0x04, bandwidth_val);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
/* IF */
|
||
|
utmp = DIV_ROUND_CLOSEST_ULL((u64)if_frequency * 0x1000000, dev->clk);
|
||
|
buf[0] = (utmp >> 16) & 0xff;
|
||
|
buf[1] = (utmp >> 8) & 0xff;
|
||
|
buf[2] = (utmp >> 0) & 0xff;
|
||
|
for (i = 0; i < 3; i++) {
|
||
|
ret = regmap_write(dev->regmap[2], 0x10 + i, buf[i]);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
/* Bandwidth */
|
||
|
if (bandwidth_vals_ptr) {
|
||
|
for (i = 0; i < 7; i++) {
|
||
|
ret = regmap_write(dev->regmap[2], 0x13 + i,
|
||
|
bandwidth_vals_ptr[i]);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
ret = regmap_write(dev->regmap[0], 0xb4, reg_bank0_b4_val);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[0], 0xcd, reg_bank0_cd_val);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[0], 0xd4, reg_bank0_d4_val);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[0], 0xd6, reg_bank0_d6_val);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
switch (c->delivery_system) {
|
||
|
case SYS_DVBT:
|
||
|
ret = regmap_write(dev->regmap[0], 0x07, 0x26);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[0], 0x00, 0xba);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[0], 0x01, 0x13);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
break;
|
||
|
case SYS_DVBT2:
|
||
|
ret = regmap_write(dev->regmap[2], 0x2b, 0x13);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[2], 0x4f, 0x05);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[1], 0xf6, 0x05);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[2], 0x32, c->stream_id);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
break;
|
||
|
case SYS_DVBC_ANNEX_A:
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Reset FSM */
|
||
|
ret = regmap_write(dev->regmap[2], 0xf8, 0x9f);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int mn88472_init(struct dvb_frontend *fe)
|
||
|
{
|
||
|
struct i2c_client *client = fe->demodulator_priv;
|
||
|
struct mn88472_dev *dev = i2c_get_clientdata(client);
|
||
|
int ret, len, rem;
|
||
|
unsigned int utmp;
|
||
|
const struct firmware *firmware;
|
||
|
const char *name = MN88472_FIRMWARE;
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
/* Power up */
|
||
|
ret = regmap_write(dev->regmap[2], 0x05, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[2], 0x0b, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[2], 0x0c, 0x00);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
/* Check if firmware is already running */
|
||
|
ret = regmap_read(dev->regmap[0], 0xf5, &utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
if (!(utmp & 0x01))
|
||
|
goto warm;
|
||
|
|
||
|
ret = request_firmware(&firmware, name, &client->dev);
|
||
|
if (ret) {
|
||
|
dev_err(&client->dev, "firmware file '%s' not found\n", name);
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
dev_info(&client->dev, "downloading firmware from file '%s'\n", name);
|
||
|
|
||
|
ret = regmap_write(dev->regmap[0], 0xf5, 0x03);
|
||
|
if (ret)
|
||
|
goto err_release_firmware;
|
||
|
|
||
|
for (rem = firmware->size; rem > 0; rem -= (dev->i2c_write_max - 1)) {
|
||
|
len = min(dev->i2c_write_max - 1, rem);
|
||
|
ret = regmap_bulk_write(dev->regmap[0], 0xf6,
|
||
|
&firmware->data[firmware->size - rem],
|
||
|
len);
|
||
|
if (ret) {
|
||
|
dev_err(&client->dev, "firmware download failed %d\n",
|
||
|
ret);
|
||
|
goto err_release_firmware;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* Parity check of firmware */
|
||
|
ret = regmap_read(dev->regmap[0], 0xf8, &utmp);
|
||
|
if (ret)
|
||
|
goto err_release_firmware;
|
||
|
if (utmp & 0x10) {
|
||
|
ret = -EINVAL;
|
||
|
dev_err(&client->dev, "firmware did not run\n");
|
||
|
goto err_release_firmware;
|
||
|
}
|
||
|
|
||
|
ret = regmap_write(dev->regmap[0], 0xf5, 0x00);
|
||
|
if (ret)
|
||
|
goto err_release_firmware;
|
||
|
|
||
|
release_firmware(firmware);
|
||
|
warm:
|
||
|
/* TS config */
|
||
|
switch (dev->ts_mode) {
|
||
|
case SERIAL_TS_MODE:
|
||
|
utmp = 0x1d;
|
||
|
break;
|
||
|
case PARALLEL_TS_MODE:
|
||
|
utmp = 0x00;
|
||
|
break;
|
||
|
default:
|
||
|
ret = -EINVAL;
|
||
|
goto err;
|
||
|
}
|
||
|
ret = regmap_write(dev->regmap[2], 0x08, utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
switch (dev->ts_clk) {
|
||
|
case VARIABLE_TS_CLOCK:
|
||
|
utmp = 0xe3;
|
||
|
break;
|
||
|
case FIXED_TS_CLOCK:
|
||
|
utmp = 0xe1;
|
||
|
break;
|
||
|
default:
|
||
|
ret = -EINVAL;
|
||
|
goto err;
|
||
|
}
|
||
|
ret = regmap_write(dev->regmap[0], 0xd9, utmp);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
dev->active = true;
|
||
|
|
||
|
return 0;
|
||
|
err_release_firmware:
|
||
|
release_firmware(firmware);
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int mn88472_sleep(struct dvb_frontend *fe)
|
||
|
{
|
||
|
struct i2c_client *client = fe->demodulator_priv;
|
||
|
struct mn88472_dev *dev = i2c_get_clientdata(client);
|
||
|
int ret;
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
/* Power down */
|
||
|
ret = regmap_write(dev->regmap[2], 0x0c, 0x30);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[2], 0x0b, 0x30);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
ret = regmap_write(dev->regmap[2], 0x05, 0x3e);
|
||
|
if (ret)
|
||
|
goto err;
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static struct dvb_frontend_ops mn88472_ops = {
|
||
|
.delsys = {SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A},
|
||
|
.info = {
|
||
|
.name = "Panasonic MN88472",
|
||
|
.symbol_rate_min = 1000000,
|
||
|
.symbol_rate_max = 7200000,
|
||
|
.caps = FE_CAN_FEC_1_2 |
|
||
|
FE_CAN_FEC_2_3 |
|
||
|
FE_CAN_FEC_3_4 |
|
||
|
FE_CAN_FEC_5_6 |
|
||
|
FE_CAN_FEC_7_8 |
|
||
|
FE_CAN_FEC_AUTO |
|
||
|
FE_CAN_QPSK |
|
||
|
FE_CAN_QAM_16 |
|
||
|
FE_CAN_QAM_32 |
|
||
|
FE_CAN_QAM_64 |
|
||
|
FE_CAN_QAM_128 |
|
||
|
FE_CAN_QAM_256 |
|
||
|
FE_CAN_QAM_AUTO |
|
||
|
FE_CAN_TRANSMISSION_MODE_AUTO |
|
||
|
FE_CAN_GUARD_INTERVAL_AUTO |
|
||
|
FE_CAN_HIERARCHY_AUTO |
|
||
|
FE_CAN_MUTE_TS |
|
||
|
FE_CAN_2G_MODULATION |
|
||
|
FE_CAN_MULTISTREAM
|
||
|
},
|
||
|
|
||
|
.get_tune_settings = mn88472_get_tune_settings,
|
||
|
|
||
|
.init = mn88472_init,
|
||
|
.sleep = mn88472_sleep,
|
||
|
|
||
|
.set_frontend = mn88472_set_frontend,
|
||
|
|
||
|
.read_status = mn88472_read_status,
|
||
|
};
|
||
|
|
||
|
static struct dvb_frontend *mn88472_get_dvb_frontend(struct i2c_client *client)
|
||
|
{
|
||
|
struct mn88472_dev *dev = i2c_get_clientdata(client);
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
return &dev->fe;
|
||
|
}
|
||
|
|
||
|
static int mn88472_probe(struct i2c_client *client,
|
||
|
const struct i2c_device_id *id)
|
||
|
{
|
||
|
struct mn88472_config *pdata = client->dev.platform_data;
|
||
|
struct mn88472_dev *dev;
|
||
|
int ret;
|
||
|
unsigned int utmp;
|
||
|
static const struct regmap_config regmap_config = {
|
||
|
.reg_bits = 8,
|
||
|
.val_bits = 8,
|
||
|
};
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
||
|
if (!dev) {
|
||
|
ret = -ENOMEM;
|
||
|
goto err;
|
||
|
}
|
||
|
|
||
|
dev->i2c_write_max = pdata->i2c_wr_max ? pdata->i2c_wr_max : ~0;
|
||
|
dev->clk = pdata->xtal;
|
||
|
dev->ts_mode = pdata->ts_mode;
|
||
|
dev->ts_clk = pdata->ts_clock;
|
||
|
dev->client[0] = client;
|
||
|
dev->regmap[0] = regmap_init_i2c(dev->client[0], ®map_config);
|
||
|
if (IS_ERR(dev->regmap[0])) {
|
||
|
ret = PTR_ERR(dev->regmap[0]);
|
||
|
goto err_kfree;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Chip has three I2C addresses for different register banks. Used
|
||
|
* addresses are 0x18, 0x1a and 0x1c. We register two dummy clients,
|
||
|
* 0x1a and 0x1c, in order to get own I2C client for each register bank.
|
||
|
*
|
||
|
* Also, register bank 2 do not support sequential I/O. Only single
|
||
|
* register write or read is allowed to that bank.
|
||
|
*/
|
||
|
dev->client[1] = i2c_new_dummy(client->adapter, 0x1a);
|
||
|
if (!dev->client[1]) {
|
||
|
ret = -ENODEV;
|
||
|
dev_err(&client->dev, "I2C registration failed\n");
|
||
|
if (ret)
|
||
|
goto err_regmap_0_regmap_exit;
|
||
|
}
|
||
|
dev->regmap[1] = regmap_init_i2c(dev->client[1], ®map_config);
|
||
|
if (IS_ERR(dev->regmap[1])) {
|
||
|
ret = PTR_ERR(dev->regmap[1]);
|
||
|
goto err_client_1_i2c_unregister_device;
|
||
|
}
|
||
|
i2c_set_clientdata(dev->client[1], dev);
|
||
|
|
||
|
dev->client[2] = i2c_new_dummy(client->adapter, 0x1c);
|
||
|
if (!dev->client[2]) {
|
||
|
ret = -ENODEV;
|
||
|
dev_err(&client->dev, "2nd I2C registration failed\n");
|
||
|
if (ret)
|
||
|
goto err_regmap_1_regmap_exit;
|
||
|
}
|
||
|
dev->regmap[2] = regmap_init_i2c(dev->client[2], ®map_config);
|
||
|
if (IS_ERR(dev->regmap[2])) {
|
||
|
ret = PTR_ERR(dev->regmap[2]);
|
||
|
goto err_client_2_i2c_unregister_device;
|
||
|
}
|
||
|
i2c_set_clientdata(dev->client[2], dev);
|
||
|
|
||
|
/* Check demod answers with correct chip id */
|
||
|
ret = regmap_read(dev->regmap[2], 0xff, &utmp);
|
||
|
if (ret)
|
||
|
goto err_regmap_2_regmap_exit;
|
||
|
|
||
|
dev_dbg(&client->dev, "chip id=%02x\n", utmp);
|
||
|
|
||
|
if (utmp != 0x02) {
|
||
|
ret = -ENODEV;
|
||
|
goto err_regmap_2_regmap_exit;
|
||
|
}
|
||
|
|
||
|
/* Sleep because chip is active by default */
|
||
|
ret = regmap_write(dev->regmap[2], 0x05, 0x3e);
|
||
|
if (ret)
|
||
|
goto err_regmap_2_regmap_exit;
|
||
|
|
||
|
/* Create dvb frontend */
|
||
|
memcpy(&dev->fe.ops, &mn88472_ops, sizeof(struct dvb_frontend_ops));
|
||
|
dev->fe.demodulator_priv = client;
|
||
|
*pdata->fe = &dev->fe;
|
||
|
i2c_set_clientdata(client, dev);
|
||
|
|
||
|
/* Setup callbacks */
|
||
|
pdata->get_dvb_frontend = mn88472_get_dvb_frontend;
|
||
|
|
||
|
dev_info(&client->dev, "Panasonic MN88472 successfully identified\n");
|
||
|
|
||
|
return 0;
|
||
|
err_regmap_2_regmap_exit:
|
||
|
regmap_exit(dev->regmap[2]);
|
||
|
err_client_2_i2c_unregister_device:
|
||
|
i2c_unregister_device(dev->client[2]);
|
||
|
err_regmap_1_regmap_exit:
|
||
|
regmap_exit(dev->regmap[1]);
|
||
|
err_client_1_i2c_unregister_device:
|
||
|
i2c_unregister_device(dev->client[1]);
|
||
|
err_regmap_0_regmap_exit:
|
||
|
regmap_exit(dev->regmap[0]);
|
||
|
err_kfree:
|
||
|
kfree(dev);
|
||
|
err:
|
||
|
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int mn88472_remove(struct i2c_client *client)
|
||
|
{
|
||
|
struct mn88472_dev *dev = i2c_get_clientdata(client);
|
||
|
|
||
|
dev_dbg(&client->dev, "\n");
|
||
|
|
||
|
regmap_exit(dev->regmap[2]);
|
||
|
i2c_unregister_device(dev->client[2]);
|
||
|
|
||
|
regmap_exit(dev->regmap[1]);
|
||
|
i2c_unregister_device(dev->client[1]);
|
||
|
|
||
|
regmap_exit(dev->regmap[0]);
|
||
|
|
||
|
kfree(dev);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct i2c_device_id mn88472_id_table[] = {
|
||
|
{"mn88472", 0},
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(i2c, mn88472_id_table);
|
||
|
|
||
|
static struct i2c_driver mn88472_driver = {
|
||
|
.driver = {
|
||
|
.name = "mn88472",
|
||
|
.suppress_bind_attrs = true,
|
||
|
},
|
||
|
.probe = mn88472_probe,
|
||
|
.remove = mn88472_remove,
|
||
|
.id_table = mn88472_id_table,
|
||
|
};
|
||
|
|
||
|
module_i2c_driver(mn88472_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
|
||
|
MODULE_DESCRIPTION("Panasonic MN88472 DVB-T/T2/C demodulator driver");
|
||
|
MODULE_LICENSE("GPL");
|
||
|
MODULE_FIRMWARE(MN88472_FIRMWARE);
|