493 lines
13 KiB
C
493 lines
13 KiB
C
|
/*
|
||
|
* SuperH Mobile SDHI
|
||
|
*
|
||
|
* Copyright (C) 2016 Sang Engineering, Wolfram Sang
|
||
|
* Copyright (C) 2015-16 Renesas Electronics Corporation
|
||
|
* Copyright (C) 2009 Magnus Damm
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
* published by the Free Software Foundation.
|
||
|
*
|
||
|
* Based on "Compaq ASIC3 support":
|
||
|
*
|
||
|
* Copyright 2001 Compaq Computer Corporation.
|
||
|
* Copyright 2004-2005 Phil Blundell
|
||
|
* Copyright 2007-2008 OpenedHand Ltd.
|
||
|
*
|
||
|
* Authors: Phil Blundell <pb@handhelds.org>,
|
||
|
* Samuel Ortiz <sameo@openedhand.com>
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/clk.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/mod_devicetable.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/of_device.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/mmc/host.h>
|
||
|
#include <linux/mfd/tmio.h>
|
||
|
#include <linux/sh_dma.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/pinctrl/consumer.h>
|
||
|
#include <linux/pinctrl/pinctrl-state.h>
|
||
|
#include <linux/regulator/consumer.h>
|
||
|
|
||
|
#include "tmio_mmc.h"
|
||
|
|
||
|
#define EXT_ACC 0xe4
|
||
|
|
||
|
#define SDHI_VER_GEN2_SDR50 0x490c
|
||
|
/* very old datasheets said 0x490c for SDR104, too. They are wrong! */
|
||
|
#define SDHI_VER_GEN2_SDR104 0xcb0d
|
||
|
#define SDHI_VER_GEN3_SD 0xcc10
|
||
|
#define SDHI_VER_GEN3_SDMMC 0xcd10
|
||
|
|
||
|
#define host_to_priv(host) container_of((host)->pdata, struct sh_mobile_sdhi, mmc_data)
|
||
|
|
||
|
struct sh_mobile_sdhi_of_data {
|
||
|
unsigned long tmio_flags;
|
||
|
unsigned long capabilities;
|
||
|
unsigned long capabilities2;
|
||
|
enum dma_slave_buswidth dma_buswidth;
|
||
|
dma_addr_t dma_rx_offset;
|
||
|
unsigned bus_shift;
|
||
|
};
|
||
|
|
||
|
static const struct sh_mobile_sdhi_of_data of_default_cfg = {
|
||
|
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
|
||
|
};
|
||
|
|
||
|
static const struct sh_mobile_sdhi_of_data of_rcar_gen1_compatible = {
|
||
|
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
|
||
|
TMIO_MMC_CLK_ACTUAL,
|
||
|
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
|
||
|
};
|
||
|
|
||
|
static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
|
||
|
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
|
||
|
TMIO_MMC_CLK_ACTUAL | TMIO_MMC_MIN_RCAR2,
|
||
|
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
|
||
|
.dma_buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES,
|
||
|
.dma_rx_offset = 0x2000,
|
||
|
};
|
||
|
|
||
|
static const struct sh_mobile_sdhi_of_data of_rcar_gen3_compatible = {
|
||
|
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE |
|
||
|
TMIO_MMC_CLK_ACTUAL | TMIO_MMC_MIN_RCAR2,
|
||
|
.capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
|
||
|
.bus_shift = 2,
|
||
|
};
|
||
|
|
||
|
static const struct of_device_id sh_mobile_sdhi_of_match[] = {
|
||
|
{ .compatible = "renesas,sdhi-shmobile" },
|
||
|
{ .compatible = "renesas,sdhi-sh73a0", .data = &of_default_cfg, },
|
||
|
{ .compatible = "renesas,sdhi-r8a73a4", .data = &of_default_cfg, },
|
||
|
{ .compatible = "renesas,sdhi-r8a7740", .data = &of_default_cfg, },
|
||
|
{ .compatible = "renesas,sdhi-r8a7778", .data = &of_rcar_gen1_compatible, },
|
||
|
{ .compatible = "renesas,sdhi-r8a7779", .data = &of_rcar_gen1_compatible, },
|
||
|
{ .compatible = "renesas,sdhi-r8a7790", .data = &of_rcar_gen2_compatible, },
|
||
|
{ .compatible = "renesas,sdhi-r8a7791", .data = &of_rcar_gen2_compatible, },
|
||
|
{ .compatible = "renesas,sdhi-r8a7792", .data = &of_rcar_gen2_compatible, },
|
||
|
{ .compatible = "renesas,sdhi-r8a7793", .data = &of_rcar_gen2_compatible, },
|
||
|
{ .compatible = "renesas,sdhi-r8a7794", .data = &of_rcar_gen2_compatible, },
|
||
|
{ .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_gen3_compatible, },
|
||
|
{ .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_gen3_compatible, },
|
||
|
{},
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
|
||
|
|
||
|
struct sh_mobile_sdhi {
|
||
|
struct clk *clk;
|
||
|
struct tmio_mmc_data mmc_data;
|
||
|
struct tmio_mmc_dma dma_priv;
|
||
|
struct pinctrl *pinctrl;
|
||
|
struct pinctrl_state *pins_default, *pins_uhs;
|
||
|
};
|
||
|
|
||
|
static void sh_mobile_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width)
|
||
|
{
|
||
|
u32 val;
|
||
|
|
||
|
/*
|
||
|
* see also
|
||
|
* sh_mobile_sdhi_of_data :: dma_buswidth
|
||
|
*/
|
||
|
switch (sd_ctrl_read16(host, CTL_VERSION)) {
|
||
|
case SDHI_VER_GEN2_SDR50:
|
||
|
val = (width == 32) ? 0x0001 : 0x0000;
|
||
|
break;
|
||
|
case SDHI_VER_GEN2_SDR104:
|
||
|
val = (width == 32) ? 0x0000 : 0x0001;
|
||
|
break;
|
||
|
case SDHI_VER_GEN3_SD:
|
||
|
case SDHI_VER_GEN3_SDMMC:
|
||
|
if (width == 64)
|
||
|
val = 0x0000;
|
||
|
else if (width == 32)
|
||
|
val = 0x0101;
|
||
|
else
|
||
|
val = 0x0001;
|
||
|
break;
|
||
|
default:
|
||
|
/* nothing to do */
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
sd_ctrl_write16(host, EXT_ACC, val);
|
||
|
}
|
||
|
|
||
|
static int sh_mobile_sdhi_clk_enable(struct tmio_mmc_host *host)
|
||
|
{
|
||
|
struct mmc_host *mmc = host->mmc;
|
||
|
struct sh_mobile_sdhi *priv = host_to_priv(host);
|
||
|
int ret = clk_prepare_enable(priv->clk);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/*
|
||
|
* The clock driver may not know what maximum frequency
|
||
|
* actually works, so it should be set with the max-frequency
|
||
|
* property which will already have been read to f_max. If it
|
||
|
* was missing, assume the current frequency is the maximum.
|
||
|
*/
|
||
|
if (!mmc->f_max)
|
||
|
mmc->f_max = clk_get_rate(priv->clk);
|
||
|
|
||
|
/*
|
||
|
* Minimum frequency is the minimum input clock frequency
|
||
|
* divided by our maximum divider.
|
||
|
*/
|
||
|
mmc->f_min = max(clk_round_rate(priv->clk, 1) / 512, 1L);
|
||
|
|
||
|
/* enable 16bit data access on SDBUF as default */
|
||
|
sh_mobile_sdhi_sdbuf_width(host, 16);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static unsigned int sh_mobile_sdhi_clk_update(struct tmio_mmc_host *host,
|
||
|
unsigned int new_clock)
|
||
|
{
|
||
|
struct sh_mobile_sdhi *priv = host_to_priv(host);
|
||
|
unsigned int freq, diff, best_freq = 0, diff_min = ~0;
|
||
|
int i, ret;
|
||
|
|
||
|
/* tested only on RCar Gen2+ currently; may work for others */
|
||
|
if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
|
||
|
return clk_get_rate(priv->clk);
|
||
|
|
||
|
/*
|
||
|
* We want the bus clock to be as close as possible to, but no
|
||
|
* greater than, new_clock. As we can divide by 1 << i for
|
||
|
* any i in [0, 9] we want the input clock to be as close as
|
||
|
* possible, but no greater than, new_clock << i.
|
||
|
*/
|
||
|
for (i = min(9, ilog2(UINT_MAX / new_clock)); i >= 0; i--) {
|
||
|
freq = clk_round_rate(priv->clk, new_clock << i);
|
||
|
if (freq > (new_clock << i)) {
|
||
|
/* Too fast; look for a slightly slower option */
|
||
|
freq = clk_round_rate(priv->clk,
|
||
|
(new_clock << i) / 4 * 3);
|
||
|
if (freq > (new_clock << i))
|
||
|
continue;
|
||
|
}
|
||
|
|
||
|
diff = new_clock - (freq >> i);
|
||
|
if (diff <= diff_min) {
|
||
|
best_freq = freq;
|
||
|
diff_min = diff;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
ret = clk_set_rate(priv->clk, best_freq);
|
||
|
|
||
|
return ret == 0 ? best_freq : clk_get_rate(priv->clk);
|
||
|
}
|
||
|
|
||
|
static void sh_mobile_sdhi_clk_disable(struct tmio_mmc_host *host)
|
||
|
{
|
||
|
struct sh_mobile_sdhi *priv = host_to_priv(host);
|
||
|
|
||
|
clk_disable_unprepare(priv->clk);
|
||
|
}
|
||
|
|
||
|
static int sh_mobile_sdhi_card_busy(struct mmc_host *mmc)
|
||
|
{
|
||
|
struct tmio_mmc_host *host = mmc_priv(mmc);
|
||
|
|
||
|
return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) & TMIO_STAT_DAT0);
|
||
|
}
|
||
|
|
||
|
static int sh_mobile_sdhi_start_signal_voltage_switch(struct mmc_host *mmc,
|
||
|
struct mmc_ios *ios)
|
||
|
{
|
||
|
struct tmio_mmc_host *host = mmc_priv(mmc);
|
||
|
struct sh_mobile_sdhi *priv = host_to_priv(host);
|
||
|
struct pinctrl_state *pin_state;
|
||
|
int ret;
|
||
|
|
||
|
switch (ios->signal_voltage) {
|
||
|
case MMC_SIGNAL_VOLTAGE_330:
|
||
|
pin_state = priv->pins_default;
|
||
|
break;
|
||
|
case MMC_SIGNAL_VOLTAGE_180:
|
||
|
pin_state = priv->pins_uhs;
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* If anything is missing, assume signal voltage is fixed at
|
||
|
* 3.3V and succeed/fail accordingly.
|
||
|
*/
|
||
|
if (IS_ERR(priv->pinctrl) || IS_ERR(pin_state))
|
||
|
return ios->signal_voltage ==
|
||
|
MMC_SIGNAL_VOLTAGE_330 ? 0 : -EINVAL;
|
||
|
|
||
|
ret = mmc_regulator_set_vqmmc(host->mmc, ios);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return pinctrl_select_state(priv->pinctrl, pin_state);
|
||
|
}
|
||
|
|
||
|
static int sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host)
|
||
|
{
|
||
|
int timeout = 1000;
|
||
|
|
||
|
while (--timeout && !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS)
|
||
|
& TMIO_STAT_SCLKDIVEN))
|
||
|
udelay(1);
|
||
|
|
||
|
if (!timeout) {
|
||
|
dev_warn(&host->pdev->dev, "timeout waiting for SD bus idle\n");
|
||
|
return -EBUSY;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int sh_mobile_sdhi_write16_hook(struct tmio_mmc_host *host, int addr)
|
||
|
{
|
||
|
switch (addr)
|
||
|
{
|
||
|
case CTL_SD_CMD:
|
||
|
case CTL_STOP_INTERNAL_ACTION:
|
||
|
case CTL_XFER_BLK_COUNT:
|
||
|
case CTL_SD_CARD_CLK_CTL:
|
||
|
case CTL_SD_XFER_LEN:
|
||
|
case CTL_SD_MEM_CARD_OPT:
|
||
|
case CTL_TRANSACTION_CTL:
|
||
|
case CTL_DMA_ENABLE:
|
||
|
case EXT_ACC:
|
||
|
return sh_mobile_sdhi_wait_idle(host);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int sh_mobile_sdhi_multi_io_quirk(struct mmc_card *card,
|
||
|
unsigned int direction, int blk_size)
|
||
|
{
|
||
|
/*
|
||
|
* In Renesas controllers, when performing a
|
||
|
* multiple block read of one or two blocks,
|
||
|
* depending on the timing with which the
|
||
|
* response register is read, the response
|
||
|
* value may not be read properly.
|
||
|
* Use single block read for this HW bug
|
||
|
*/
|
||
|
if ((direction == MMC_DATA_READ) &&
|
||
|
blk_size == 2)
|
||
|
return 1;
|
||
|
|
||
|
return blk_size;
|
||
|
}
|
||
|
|
||
|
static void sh_mobile_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable)
|
||
|
{
|
||
|
sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? 2 : 0);
|
||
|
|
||
|
/* enable 32bit access if DMA mode if possibile */
|
||
|
sh_mobile_sdhi_sdbuf_width(host, enable ? 32 : 16);
|
||
|
}
|
||
|
|
||
|
static int sh_mobile_sdhi_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
const struct of_device_id *of_id =
|
||
|
of_match_device(sh_mobile_sdhi_of_match, &pdev->dev);
|
||
|
struct sh_mobile_sdhi *priv;
|
||
|
struct tmio_mmc_data *mmc_data;
|
||
|
struct tmio_mmc_data *mmd = pdev->dev.platform_data;
|
||
|
struct tmio_mmc_host *host;
|
||
|
struct resource *res;
|
||
|
int irq, ret, i = 0;
|
||
|
struct tmio_mmc_dma *dma_priv;
|
||
|
|
||
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||
|
if (!res)
|
||
|
return -EINVAL;
|
||
|
|
||
|
priv = devm_kzalloc(&pdev->dev, sizeof(struct sh_mobile_sdhi), GFP_KERNEL);
|
||
|
if (!priv)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
mmc_data = &priv->mmc_data;
|
||
|
dma_priv = &priv->dma_priv;
|
||
|
|
||
|
priv->clk = devm_clk_get(&pdev->dev, NULL);
|
||
|
if (IS_ERR(priv->clk)) {
|
||
|
ret = PTR_ERR(priv->clk);
|
||
|
dev_err(&pdev->dev, "cannot get clock: %d\n", ret);
|
||
|
goto eprobe;
|
||
|
}
|
||
|
|
||
|
priv->pinctrl = devm_pinctrl_get(&pdev->dev);
|
||
|
if (!IS_ERR(priv->pinctrl)) {
|
||
|
priv->pins_default = pinctrl_lookup_state(priv->pinctrl,
|
||
|
PINCTRL_STATE_DEFAULT);
|
||
|
priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl,
|
||
|
"state_uhs");
|
||
|
}
|
||
|
|
||
|
host = tmio_mmc_host_alloc(pdev);
|
||
|
if (!host) {
|
||
|
ret = -ENOMEM;
|
||
|
goto eprobe;
|
||
|
}
|
||
|
|
||
|
if (of_id && of_id->data) {
|
||
|
const struct sh_mobile_sdhi_of_data *of_data = of_id->data;
|
||
|
|
||
|
mmc_data->flags |= of_data->tmio_flags;
|
||
|
mmc_data->capabilities |= of_data->capabilities;
|
||
|
mmc_data->capabilities2 |= of_data->capabilities2;
|
||
|
mmc_data->dma_rx_offset = of_data->dma_rx_offset;
|
||
|
dma_priv->dma_buswidth = of_data->dma_buswidth;
|
||
|
host->bus_shift = of_data->bus_shift;
|
||
|
}
|
||
|
|
||
|
host->dma = dma_priv;
|
||
|
host->write16_hook = sh_mobile_sdhi_write16_hook;
|
||
|
host->clk_enable = sh_mobile_sdhi_clk_enable;
|
||
|
host->clk_update = sh_mobile_sdhi_clk_update;
|
||
|
host->clk_disable = sh_mobile_sdhi_clk_disable;
|
||
|
host->multi_io_quirk = sh_mobile_sdhi_multi_io_quirk;
|
||
|
|
||
|
/* SDR speeds are only available on Gen2+ */
|
||
|
if (mmc_data->flags & TMIO_MMC_MIN_RCAR2) {
|
||
|
/* card_busy caused issues on r8a73a4 (pre-Gen2) CD-less SDHI */
|
||
|
host->card_busy = sh_mobile_sdhi_card_busy;
|
||
|
host->start_signal_voltage_switch =
|
||
|
sh_mobile_sdhi_start_signal_voltage_switch;
|
||
|
}
|
||
|
|
||
|
/* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */
|
||
|
if (!host->bus_shift && resource_size(res) > 0x100) /* old way to determine the shift */
|
||
|
host->bus_shift = 1;
|
||
|
|
||
|
if (mmd)
|
||
|
*mmc_data = *mmd;
|
||
|
|
||
|
dma_priv->filter = shdma_chan_filter;
|
||
|
dma_priv->enable = sh_mobile_sdhi_enable_dma;
|
||
|
|
||
|
mmc_data->alignment_shift = 1; /* 2-byte alignment */
|
||
|
mmc_data->capabilities |= MMC_CAP_MMC_HIGHSPEED;
|
||
|
|
||
|
/*
|
||
|
* All SDHI blocks support 2-byte and larger block sizes in 4-bit
|
||
|
* bus width mode.
|
||
|
*/
|
||
|
mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES;
|
||
|
|
||
|
/*
|
||
|
* All SDHI blocks support SDIO IRQ signalling.
|
||
|
*/
|
||
|
mmc_data->flags |= TMIO_MMC_SDIO_IRQ;
|
||
|
|
||
|
/*
|
||
|
* All SDHI have CMD12 controll bit
|
||
|
*/
|
||
|
mmc_data->flags |= TMIO_MMC_HAVE_CMD12_CTRL;
|
||
|
|
||
|
/*
|
||
|
* All SDHI need SDIO_INFO1 reserved bit
|
||
|
*/
|
||
|
mmc_data->flags |= TMIO_MMC_SDIO_STATUS_QUIRK;
|
||
|
|
||
|
ret = tmio_mmc_host_probe(host, mmc_data);
|
||
|
if (ret < 0)
|
||
|
goto efree;
|
||
|
|
||
|
while (1) {
|
||
|
irq = platform_get_irq(pdev, i);
|
||
|
if (irq < 0)
|
||
|
break;
|
||
|
i++;
|
||
|
ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq, 0,
|
||
|
dev_name(&pdev->dev), host);
|
||
|
if (ret)
|
||
|
goto eirq;
|
||
|
}
|
||
|
|
||
|
/* There must be at least one IRQ source */
|
||
|
if (!i) {
|
||
|
ret = irq;
|
||
|
goto eirq;
|
||
|
}
|
||
|
|
||
|
dev_info(&pdev->dev, "%s base at 0x%08lx max clock rate %u MHz\n",
|
||
|
mmc_hostname(host->mmc), (unsigned long)
|
||
|
(platform_get_resource(pdev, IORESOURCE_MEM, 0)->start),
|
||
|
host->mmc->f_max / 1000000);
|
||
|
|
||
|
return ret;
|
||
|
|
||
|
eirq:
|
||
|
tmio_mmc_host_remove(host);
|
||
|
efree:
|
||
|
tmio_mmc_host_free(host);
|
||
|
eprobe:
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int sh_mobile_sdhi_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
struct mmc_host *mmc = platform_get_drvdata(pdev);
|
||
|
struct tmio_mmc_host *host = mmc_priv(mmc);
|
||
|
|
||
|
tmio_mmc_host_remove(host);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
|
||
|
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
||
|
pm_runtime_force_resume)
|
||
|
SET_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
|
||
|
tmio_mmc_host_runtime_resume,
|
||
|
NULL)
|
||
|
};
|
||
|
|
||
|
static struct platform_driver sh_mobile_sdhi_driver = {
|
||
|
.driver = {
|
||
|
.name = "sh_mobile_sdhi",
|
||
|
.pm = &tmio_mmc_dev_pm_ops,
|
||
|
.of_match_table = sh_mobile_sdhi_of_match,
|
||
|
},
|
||
|
.probe = sh_mobile_sdhi_probe,
|
||
|
.remove = sh_mobile_sdhi_remove,
|
||
|
};
|
||
|
|
||
|
module_platform_driver(sh_mobile_sdhi_driver);
|
||
|
|
||
|
MODULE_DESCRIPTION("SuperH Mobile SDHI driver");
|
||
|
MODULE_AUTHOR("Magnus Damm");
|
||
|
MODULE_LICENSE("GPL v2");
|
||
|
MODULE_ALIAS("platform:sh_mobile_sdhi");
|