/* * CDC network driver ioctl/indication encoding * Broadcom 802.11abg Networking Device Driver * * Definitions subject to change without notice. * * Copyright (C) 1999-2015, Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you * under the terms of the GNU General Public License version 2 (the "GPL"), * available at http://www.broadcom.com/licenses/GPLv2.php, with the * following added to such license: * * As a special exception, the copyright holders of this software give you * permission to link this software with independent modules, and to copy and * distribute the resulting executable under terms of your choice, provided that * you also meet, for each linked independent module, the terms and conditions of * the license of that module. An independent module is a module which is not * derived from this software. The special exception does not apply to any * modifications of the software. * * Notwithstanding the above, under no circumstances may you combine this * software in any way with any other Broadcom software provided under a license * other than the GPL, without Broadcom's express prior written consent. * * $Id: bcmcdc.h 318308 2012-03-02 02:23:42Z $ */ #ifndef _bcmcdc_h_ #define _bcmcdc_h_ #include typedef struct cdc_ioctl { uint32 cmd; /* ioctl command value */ uint32 len; /* lower 16: output buflen; upper 16: input buflen (excludes header) */ uint32 flags; /* flag defns given below */ uint32 status; /* status code returned from the device */ } cdc_ioctl_t; /* Max valid buffer size that can be sent to the dongle */ #define CDC_MAX_MSG_SIZE ETHER_MAX_LEN /* len field is divided into input and output buffer lengths */ #define CDCL_IOC_OUTLEN_MASK 0x0000FFFF /* maximum or expected response length, */ /* excluding IOCTL header */ #define CDCL_IOC_OUTLEN_SHIFT 0 #define CDCL_IOC_INLEN_MASK 0xFFFF0000 /* input buffer length, excluding IOCTL header */ #define CDCL_IOC_INLEN_SHIFT 16 /* CDC flag definitions */ #define CDCF_IOC_ERROR 0x01 /* 0=success, 1=ioctl cmd failed */ #define CDCF_IOC_SET 0x02 /* 0=get, 1=set cmd */ #define CDCF_IOC_OVL_IDX_MASK 0x3c /* overlay region index mask */ #define CDCF_IOC_OVL_RSV 0x40 /* 1=reserve this overlay region */ #define CDCF_IOC_OVL 0x80 /* 1=this ioctl corresponds to an overlay */ #define CDCF_IOC_ACTION_MASK 0xfe /* SET/GET, OVL_IDX, OVL_RSV, OVL mask */ #define CDCF_IOC_ACTION_SHIFT 1 /* SET/GET, OVL_IDX, OVL_RSV, OVL shift */ #define CDCF_IOC_IF_MASK 0xF000 /* I/F index */ #define CDCF_IOC_IF_SHIFT 12 #define CDCF_IOC_ID_MASK 0xFFFF0000 /* used to uniquely id an ioctl req/resp pairing */ #define CDCF_IOC_ID_SHIFT 16 /* # of bits of shift for ID Mask */ #define CDC_IOC_IF_IDX(flags) (((flags) & CDCF_IOC_IF_MASK) >> CDCF_IOC_IF_SHIFT) #define CDC_IOC_ID(flags) (((flags) & CDCF_IOC_ID_MASK) >> CDCF_IOC_ID_SHIFT) #define CDC_GET_IF_IDX(hdr) \ ((int)((((hdr)->flags) & CDCF_IOC_IF_MASK) >> CDCF_IOC_IF_SHIFT)) #define CDC_SET_IF_IDX(hdr, idx) \ ((hdr)->flags = (((hdr)->flags & ~CDCF_IOC_IF_MASK) | ((idx) << CDCF_IOC_IF_SHIFT))) /* * BDC header * * The BDC header is used on data packets to convey priority across USB. */ struct bdc_header { uint8 flags; /* Flags */ uint8 priority; /* 802.1d Priority 0:2 bits, 4:7 USB flow control info */ uint8 flags2; uint8 dataOffset; /* Offset from end of BDC header to packet data, in * 4-byte words. Leaves room for optional headers. */ }; #define BDC_HEADER_LEN 4 /* flags field bitmap */ #define BDC_FLAG_80211_PKT 0x01 /* Packet is in 802.11 format (dongle -> host) */ #define BDC_FLAG_SUM_GOOD 0x04 /* Dongle has verified good RX checksums */ #define BDC_FLAG_SUM_NEEDED 0x08 /* Dongle needs to do TX checksums: host->device */ #define BDC_FLAG_EVENT_MSG 0x08 /* Payload contains an event msg: device->host */ #define BDC_FLAG_VER_MASK 0xf0 /* Protocol version mask */ #define BDC_FLAG_VER_SHIFT 4 /* Protocol version shift */ /* priority field bitmap */ #define BDC_PRIORITY_MASK 0x07 #define BDC_PRIORITY_FC_MASK 0xf0 /* flow control info mask */ #define BDC_PRIORITY_FC_SHIFT 4 /* flow control info shift */ /* flags2 field bitmap */ #define BDC_FLAG2_IF_MASK 0x0f /* interface index (host <-> dongle) */ #define BDC_FLAG2_IF_SHIFT 0 #define BDC_FLAG2_FC_FLAG 0x10 /* flag to indicate if pkt contains */ /* FLOW CONTROL info only */ /* version numbers */ #define BDC_PROTO_VER_1 1 /* Old Protocol version */ #define BDC_PROTO_VER 2 /* Protocol version */ /* flags2.if field access macros */ #define BDC_GET_IF_IDX(hdr) \ ((int)((((hdr)->flags2) & BDC_FLAG2_IF_MASK) >> BDC_FLAG2_IF_SHIFT)) #define BDC_SET_IF_IDX(hdr, idx) \ ((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_IF_MASK) | ((idx) << BDC_FLAG2_IF_SHIFT))) #define BDC_FLAG2_PAD_MASK 0xf0 #define BDC_FLAG_PAD_MASK 0x03 #define BDC_FLAG2_PAD_SHIFT 2 #define BDC_FLAG_PAD_SHIFT 0 #define BDC_FLAG2_PAD_IDX 0x3c #define BDC_FLAG_PAD_IDX 0x03 #define BDC_GET_PAD_LEN(hdr) \ ((int)(((((hdr)->flags2) & BDC_FLAG2_PAD_MASK) >> BDC_FLAG2_PAD_SHIFT) | \ ((((hdr)->flags) & BDC_FLAG_PAD_MASK) >> BDC_FLAG_PAD_SHIFT))) #define BDC_SET_PAD_LEN(hdr, idx) \ ((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_PAD_MASK) | \ (((idx) & BDC_FLAG2_PAD_IDX) << BDC_FLAG2_PAD_SHIFT))); \ ((hdr)->flags = (((hdr)->flags & ~BDC_FLAG_PAD_MASK) | \ (((idx) & BDC_FLAG_PAD_IDX) << BDC_FLAG_PAD_SHIFT))) #endif /* _bcmcdc_h_ */