/* * Broadcom SiliconBackplane hardware register definitions. * * Portions of this code are copyright (c) 2017 Cypress Semiconductor Corporation * * Copyright (C) 1999-2017, Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you * under the terms of the GNU General Public License version 2 (the "GPL"), * available at http://www.broadcom.com/licenses/GPLv2.php, with the * following added to such license: * * As a special exception, the copyright holders of this software give you * permission to link this software with independent modules, and to copy and * distribute the resulting executable under terms of your choice, provided that * you also meet, for each linked independent module, the terms and conditions of * the license of that module. An independent module is a module which is not * derived from this software. The special exception does not apply to any * modifications of the software. * * Notwithstanding the above, under no circumstances may you combine this * software in any way with any other Broadcom software provided under a license * other than the GPL, without Broadcom's express prior written consent. * * * <> * * $Id: sbconfig.h 530150 2015-01-29 08:43:40Z $ */ #ifndef _SBCONFIG_H #define _SBCONFIG_H /* cpp contortions to concatenate w/arg prescan */ #ifndef PAD #define _PADLINE(line) pad ## line #define _XSTR(line) _PADLINE(line) #define PAD _XSTR(__LINE__) #endif /* enumeration in SB is based on the premise that cores are contiguos in the * enumeration space. */ #define SB_BUS_SIZE 0x10000 /**< Each bus gets 64Kbytes for cores */ #define SB_BUS_BASE(b) (SI_ENUM_BASE + (b) * SB_BUS_SIZE) #define SB_BUS_MAXCORES (SB_BUS_SIZE / SI_CORE_SIZE) /**< Max cores per bus */ /* * Sonics Configuration Space Registers. */ #define SBCONFIGOFF 0xf00 /**< core sbconfig regs are top 256bytes of regs */ #define SBCONFIGSIZE 256 /**< sizeof (sbconfig_t) */ #define SBIPSFLAG 0x08 #define SBTPSFLAG 0x18 #define SBTMERRLOGA 0x48 /**< sonics >= 2.3 */ #define SBTMERRLOG 0x50 /**< sonics >= 2.3 */ #define SBADMATCH3 0x60 #define SBADMATCH2 0x68 #define SBADMATCH1 0x70 #define SBIMSTATE 0x90 #define SBINTVEC 0x94 #define SBTMSTATELOW 0x98 #define SBTMSTATEHIGH 0x9c #define SBBWA0 0xa0 #define SBIMCONFIGLOW 0xa8 #define SBIMCONFIGHIGH 0xac #define SBADMATCH0 0xb0 #define SBTMCONFIGLOW 0xb8 #define SBTMCONFIGHIGH 0xbc #define SBBCONFIG 0xc0 #define SBBSTATE 0xc8 #define SBACTCNFG 0xd8 #define SBFLAGST 0xe8 #define SBIDLOW 0xf8 #define SBIDHIGH 0xfc /* All the previous registers are above SBCONFIGOFF, but with Sonics 2.3, we have * a few registers *below* that line. I think it would be very confusing to try * and change the value of SBCONFIGOFF, so I'm definig them as absolute offsets here, */ #define SBIMERRLOGA 0xea8 #define SBIMERRLOG 0xeb0 #define SBTMPORTCONNID0 0xed8 #define SBTMPORTLOCK0 0xef8 #if !defined(_LANGUAGE_ASSEMBLY) && !defined(__ASSEMBLY__) typedef volatile struct _sbconfig { uint32 PAD[2]; uint32 sbipsflag; /**< initiator port ocp slave flag */ uint32 PAD[3]; uint32 sbtpsflag; /**< target port ocp slave flag */ uint32 PAD[11]; uint32 sbtmerrloga; /**< (sonics >= 2.3) */ uint32 PAD; uint32 sbtmerrlog; /**< (sonics >= 2.3) */ uint32 PAD[3]; uint32 sbadmatch3; /**< address match3 */ uint32 PAD; uint32 sbadmatch2; /**< address match2 */ uint32 PAD; uint32 sbadmatch1; /**< address match1 */ uint32 PAD[7]; uint32 sbimstate; /**< initiator agent state */ uint32 sbintvec; /**< interrupt mask */ uint32 sbtmstatelow; /**< target state */ uint32 sbtmstatehigh; /**< target state */ uint32 sbbwa0; /**< bandwidth allocation table0 */ uint32 PAD; uint32 sbimconfiglow; /**< initiator configuration */ uint32 sbimconfighigh; /**< initiator configuration */ uint32 sbadmatch0; /**< address match0 */ uint32 PAD; uint32 sbtmconfiglow; /**< target configuration */ uint32 sbtmconfighigh; /**< target configuration */ uint32 sbbconfig; /**< broadcast configuration */ uint32 PAD; uint32 sbbstate; /**< broadcast state */ uint32 PAD[3]; uint32 sbactcnfg; /**< activate configuration */ uint32 PAD[3]; uint32 sbflagst; /**< current sbflags */ uint32 PAD[3]; uint32 sbidlow; /**< identification */ uint32 sbidhigh; /**< identification */ } sbconfig_t; #endif /* !_LANGUAGE_ASSEMBLY && !__ASSEMBLY__ */ /* sbipsflag */ #define SBIPS_INT1_MASK 0x3f /**< which sbflags get routed to mips interrupt 1 */ #define SBIPS_INT1_SHIFT 0 #define SBIPS_INT2_MASK 0x3f00 /**< which sbflags get routed to mips interrupt 2 */ #define SBIPS_INT2_SHIFT 8 #define SBIPS_INT3_MASK 0x3f0000 /**< which sbflags get routed to mips interrupt 3 */ #define SBIPS_INT3_SHIFT 16 #define SBIPS_INT4_MASK 0x3f000000 /**< which sbflags get routed to mips interrupt 4 */ #define SBIPS_INT4_SHIFT 24 /* sbtpsflag */ #define SBTPS_NUM0_MASK 0x3f /**< interrupt sbFlag # generated by this core */ #define SBTPS_F0EN0 0x40 /**< interrupt is always sent on the backplane */ /* sbtmerrlog */ #define SBTMEL_CM 0x00000007 /**< command */ #define SBTMEL_CI 0x0000ff00 /**< connection id */ #define SBTMEL_EC 0x0f000000 /**< error code */ #define SBTMEL_ME 0x80000000 /**< multiple error */ /* sbimstate */ #define SBIM_PC 0xf /**< pipecount */ #define SBIM_AP_MASK 0x30 /**< arbitration policy */ #define SBIM_AP_BOTH 0x00 /**< use both timeslaces and token */ #define SBIM_AP_TS 0x10 /**< use timesliaces only */ #define SBIM_AP_TK 0x20 /**< use token only */ #define SBIM_AP_RSV 0x30 /**< reserved */ #define SBIM_IBE 0x20000 /**< inbanderror */ #define SBIM_TO 0x40000 /**< timeout */ #define SBIM_BY 0x01800000 /**< busy (sonics >= 2.3) */ #define SBIM_RJ 0x02000000 /**< reject (sonics >= 2.3) */ /* sbtmstatelow */ #define SBTML_RESET 0x0001 /**< reset */ #define SBTML_REJ_MASK 0x0006 /**< reject field */ #define SBTML_REJ 0x0002 /**< reject */ #define SBTML_TMPREJ 0x0004 /**< temporary reject, for error recovery */ #define SBTML_SICF_SHIFT 16 /**< Shift to locate the SI control flags in sbtml */ /* sbtmstatehigh */ #define SBTMH_SERR 0x0001 /**< serror */ #define SBTMH_INT 0x0002 /**< interrupt */ #define SBTMH_BUSY 0x0004 /**< busy */ #define SBTMH_TO 0x0020 /**< timeout (sonics >= 2.3) */ #define SBTMH_SISF_SHIFT 16 /**< Shift to locate the SI status flags in sbtmh */ /* sbbwa0 */ #define SBBWA_TAB0_MASK 0xffff /**< lookup table 0 */ #define SBBWA_TAB1_MASK 0xffff /**< lookup table 1 */ #define SBBWA_TAB1_SHIFT 16 /* sbimconfiglow */ #define SBIMCL_STO_MASK 0x7 /**< service timeout */ #define SBIMCL_RTO_MASK 0x70 /**< request timeout */ #define SBIMCL_RTO_SHIFT 4 #define SBIMCL_CID_MASK 0xff0000 /**< connection id */ #define SBIMCL_CID_SHIFT 16 /* sbimconfighigh */ #define SBIMCH_IEM_MASK 0xc /**< inband error mode */ #define SBIMCH_TEM_MASK 0x30 /**< timeout error mode */ #define SBIMCH_TEM_SHIFT 4 #define SBIMCH_BEM_MASK 0xc0 /**< bus error mode */ #define SBIMCH_BEM_SHIFT 6 /* sbadmatch0 */ #define SBAM_TYPE_MASK 0x3 /**< address type */ #define SBAM_AD64 0x4 /**< reserved */ #define SBAM_ADINT0_MASK 0xf8 /**< type0 size */ #define SBAM_ADINT0_SHIFT 3 #define SBAM_ADINT1_MASK 0x1f8 /**< type1 size */ #define SBAM_ADINT1_SHIFT 3 #define SBAM_ADINT2_MASK 0x1f8 /**< type2 size */ #define SBAM_ADINT2_SHIFT 3 #define SBAM_ADEN 0x400 /**< enable */ #define SBAM_ADNEG 0x800 /**< negative decode */ #define SBAM_BASE0_MASK 0xffffff00 /**< type0 base address */ #define SBAM_BASE0_SHIFT 8 #define SBAM_BASE1_MASK 0xfffff000 /**< type1 base address for the core */ #define SBAM_BASE1_SHIFT 12 #define SBAM_BASE2_MASK 0xffff0000 /**< type2 base address for the core */ #define SBAM_BASE2_SHIFT 16 /* sbtmconfiglow */ #define SBTMCL_CD_MASK 0xff /**< clock divide */ #define SBTMCL_CO_MASK 0xf800 /**< clock offset */ #define SBTMCL_CO_SHIFT 11 #define SBTMCL_IF_MASK 0xfc0000 /**< interrupt flags */ #define SBTMCL_IF_SHIFT 18 #define SBTMCL_IM_MASK 0x3000000 /**< interrupt mode */ #define SBTMCL_IM_SHIFT 24 /* sbtmconfighigh */ #define SBTMCH_BM_MASK 0x3 /**< busy mode */ #define SBTMCH_RM_MASK 0x3 /**< retry mode */ #define SBTMCH_RM_SHIFT 2 #define SBTMCH_SM_MASK 0x30 /**< stop mode */ #define SBTMCH_SM_SHIFT 4 #define SBTMCH_EM_MASK 0x300 /**< sb error mode */ #define SBTMCH_EM_SHIFT 8 #define SBTMCH_IM_MASK 0xc00 /**< int mode */ #define SBTMCH_IM_SHIFT 10 /* sbbconfig */ #define SBBC_LAT_MASK 0x3 /**< sb latency */ #define SBBC_MAX0_MASK 0xf0000 /**< maxccntr0 */ #define SBBC_MAX0_SHIFT 16 #define SBBC_MAX1_MASK 0xf00000 /**< maxccntr1 */ #define SBBC_MAX1_SHIFT 20 /* sbbstate */ #define SBBS_SRD 0x1 /**< st reg disable */ #define SBBS_HRD 0x2 /**< hold reg disable */ /* sbidlow */ #define SBIDL_CS_MASK 0x3 /**< config space */ #define SBIDL_AR_MASK 0x38 /**< # address ranges supported */ #define SBIDL_AR_SHIFT 3 #define SBIDL_SYNCH 0x40 /**< sync */ #define SBIDL_INIT 0x80 /**< initiator */ #define SBIDL_MINLAT_MASK 0xf00 /**< minimum backplane latency */ #define SBIDL_MINLAT_SHIFT 8 #define SBIDL_MAXLAT 0xf000 /**< maximum backplane latency */ #define SBIDL_MAXLAT_SHIFT 12 #define SBIDL_FIRST 0x10000 /**< this initiator is first */ #define SBIDL_CW_MASK 0xc0000 /**< cycle counter width */ #define SBIDL_CW_SHIFT 18 #define SBIDL_TP_MASK 0xf00000 /**< target ports */ #define SBIDL_TP_SHIFT 20 #define SBIDL_IP_MASK 0xf000000 /**< initiator ports */ #define SBIDL_IP_SHIFT 24 #define SBIDL_RV_MASK 0xf0000000 /**< sonics backplane revision code */ #define SBIDL_RV_SHIFT 28 #define SBIDL_RV_2_2 0x00000000 /**< version 2.2 or earlier */ #define SBIDL_RV_2_3 0x10000000 /**< version 2.3 */ /* sbidhigh */ #define SBIDH_RC_MASK 0x000f /**< revision code */ #define SBIDH_RCE_MASK 0x7000 /**< revision code extension field */ #define SBIDH_RCE_SHIFT 8 #define SBCOREREV(sbidh) \ ((((sbidh) & SBIDH_RCE_MASK) >> SBIDH_RCE_SHIFT) | ((sbidh) & SBIDH_RC_MASK)) #define SBIDH_CC_MASK 0x8ff0 /**< core code */ #define SBIDH_CC_SHIFT 4 #define SBIDH_VC_MASK 0xffff0000 /**< vendor code */ #define SBIDH_VC_SHIFT 16 #define SB_COMMIT 0xfd8 /**< update buffered registers value */ /* vendor codes */ #define SB_VEND_BCM 0x4243 /**< Broadcom's SB vendor code */ #endif /* _SBCONFIG_H */