Release: 2.0.19 Date: 15/09/2018 tag: v2.0.19 ================================ * ATLDRV-625 Bad RSS behaviour on Large fragmented UDP packets * ATLDRV-622 Need to disable flow control in MAC when it is disabled by the driver Release: 2.0.18 Date: 06/09/2018 tag: v2.0.18 ================================ * ATLDRV-546 Linux: Fix old kernel builds * ATLDRV-575 SMMU fault after device unbind Release: 2.0.17 Date: 03/08/2018 tag: v2.0.17 ================================ * ATLDRV-314 Multicast packets never get filtered on linux * ATLDRV-536 Fix bugs that found smatch * ATLDRV-540 upstream: syncup 08/2018 Release: 2.0.16 Date: 27/07/2018 tag: v2.0.16 ================================ * ATLDRV-384 Reduce link-up time to 1sec for SE FW - Link interrupt handling now allows faster link event detection - Special mode for fast init sequence. Disabled by default, enable with AQ_CFG_FAST_START in aq_cfg.h * Minor codestyle fixes Release: 2.0.15 Date: 29/06/2018 tag: v2.0.15 ================================ * RM3118: Add Phy Int/Ext loopbacks to ethtool. NOTICE: - All loopback modes should be enabled only when interface is UP. - DMANetworkLoopback mode may not function as expected. Release: 2.0.14 Date: 27/06/2018 tag: v2.0.14 ================================ * RM3132: KVM/macvlan bridge was not functional * RM3118: Add loopback to ethtool. README with priv-flags sections. Only System level loopback is functional for now. Release: 2.0.12 Date: 29/05/2018 tag: v2.0.12 ================================ * RM2921 Configure WOL to enable magic by default * netdev 4.17 styling syncup Release: 2.0.11 Date: 18/05/2018 tag: v2.0.11 ================================ * cable len and chip temperature are now implemented via hwmon (sensors API) * Performance: Reset page offset when found that full page reuse is possible Release: 2.0.10.0 Date: 03/05/2018 tag: v2.0.10 ================================ * RM2691: Kernel 2.x support (experimental) * RM2692: Linux DKMS packaging * RM2698: ethtool negotiate restart should be implemented * RM2736: ethtool ring size dynamic change * RM2734: EEE settings are lost after link down/up * RM2765: Linux driver must support WOL from shutdown * RM2697: WoL works in wrong way with FW3.x DW * RM2693: Pause frame (flow control) configuration should be done via ethtool * RH-1542881 Declare vlan_features bits: http://gitlab.rdc.aquantia.com/drv/Linux/merge_requests/62 * Leftover bugfixes (msi isr) http://gitlab.rdc.aquantia.com/drv/Linux/merge_requests/61 Release: 2.0.9.0 Date: 18/04/2018 tag: v2.0.9 ================================ * RM2738: Fix RHEL7.5 incompatibility Release: 2.0.8.0 Date: 11/04/2018 tag: v2.0.8 ================================ * 199177: ASUS XG-C100C 10G Network Adapter no longer working since 4.16 FW 1.5.44 and reset sequence collision https://bugzilla.kernel.org/show_bug.cgi?id=199177 http://gitlab.rdc.aquantia.com/drv/Linux/merge_requests/54 Release: 2.0.7.0 Date: 05/04/2018 tag: v2.0.7 ================================ * RM2544 Need to make EEE feature configurable with ethtool * RM2676 net: aquantia: take care when shutdown on already stopped device * RM2667 Disable Dirty Wake on shutdown and suspend * (misc) netdev comments 4.16 rc6 * readme updates on installation Release: 2.0.6.0 Date: 15/03/2018 tag: v2.0.6 ================================ * RM2574 Post fix (R.Volkov found) * Shutdown pci callback closes the link (Synology NAS issues) * Introduce rx refill threshold parameter: aq_rx_refill_thres Release: 2.0.5.0 Date: 06/03/2018 tag: v2.0.5 ================================ * RM2574 B1 hardware never indicates mailbox ready * RM2573 Flow control must be enabled by deffault * RM2543 Linux driver must set link_drop bit when interface is down * Buffer flip&reuse implementation http://gitlab.rdc.aquantia.com/drv/Linux/merge_requests/41 Release: 2.0.4.0 Date: 16/02/2018 tag: v2.0.4 ================================ * RM2508 Indication of the WOL state does not work correctly * RM2520 WOL in 2.0.3.0 Linux driver dosn't work with B0 cards * RM2512 No traffic on FW 1.5.58 with 2x Linux driver * Wrong MTU size checks (< Min or > Max) are now working again on linuxes < 4.10 * Fix compilation on linux 3.16 * Reset sequence fix: RBL secure chip reset sequence have to reset SPI * RM2536 allow Live MAC change * napi_alloc_skb improves performance on high packet rates Release: 2.0.3.0 Date: 29/01/2018 tag: v2.0.3 ================================ * netdev syncup * RM2209: WOL feature (magic packet only) * Cable length and temp diagnostics data in sysfs * RM2370 Errors are appear during uninstalation linux driver Upstream Release: 2.0.2.1-kern kernel: 4.16 ================================ d28e9d1 net: aquantia: driver version bump fd8221f net: aquantia: Implement pci shutdown callback a1c1d63 net: aquantia: Allow live mac address changes 33a3d54 net: aquantia: Add aq_tx_clean_budget and valid budget handling logic 002594f net: aquantia: Change inefficient wait loop on fw data reads b8d7ecb net: aquantia: Fix a regression with reset on old firmware c0a6a02 net: aquantia: Fix hardware reset when SPI may rarely hangup Release 2.0.2.0 Upstream: 2.0.2-kern tag: v2.0.2 25/01/2018 f/w 1.x, 2.9.x, 3.x or above ================================ * netdev syncup: Do not reset curr_stats on each up/down * netdev syncup: typo Octects * RM2420:Wrong felicity IDs and link speeds reported Release 2.0.1.0 tag: v2.0.1 30/11/2017 f/w 1.x, 2.9.x, 3.x or above ================================ *RM2267:Statistics mistakes and errors *RM2128:... PCI errors and NMI Release 2.0.0.0 tag: v2.0.0 17/11/2017 f/w 1.x, 2.9.x, 3.x or above ================================ + Reset sequence implemented * MAC address readout fixed Release 2.0.0.0-alpha2 tag: v2.0.0-alpha2 11/11/2017 f/w 3.0.3 or above ================================ * kernel 3.x build fixed Release 2.0.0.0-alpha1 tag: v2.0.0-alpha1 10/11/2017 f/w 3.0.3 or above ================================ + Initial support for both 1.x, 2.x and 3.x FW * 64bit wide statistics in ethtool ! Full reset sequence is not yet implemented ! Link status is polled, no isr usage yet Release 1.6.12.0 master 10_09-2017 f/w 1.5.14 or above ============= +QNAP requesting ethtool -c option (#2053) *Statistics never gets zeroed upon interface down/up (#2015) *Non optimal Interrupt Moderation Rates default settings makes udp very slow (#2041) Release 1.6.11.0 master 09_25-2017 f/w 1.5.14 or above ============= *Link state is up right after link up command execution for 2 seconds then link goes down (#2033) *Netnext mainline syncup Release 1.6.10.0 master 09_20-2017 f/w 1.5.14 or above ============= *Invalid queue state management causes Tx/Rx to die (#1941) *kernel mainline driver does not support jumbo frames (#1985) Release 1.6.9.0 rel-dev-1.6.9 08_11-2017 f/w 1.5.14 or above ============= *MSM counters are not reset after driver is unloaded/loaded. (#1619). *Kernel panic/memory corruption on multicast > 32 (#1864). *Incorrect Interrupt moderation values assignment in linux driver (#1918). *Fix for enabling incorrect interrupt vectors count on Puma 7 Intel SoC (with Linux Kernel 3.10). *Removed unuseful spinlocks from datapath. *Minor fixes. Release 1.6.8.0 rel-dev 07_05-2017 f/w 1.5.14 or above ============= *Fix for RX datapath initialization. *Minor fixes. Release 1.6.7.0 rel-dev 05_05-2017 f/w 1.5.14 or above ============= *Synced with linux sources tree. *Support for GRO *Fixed Ethtool -S crash *Support for kernels >= 3.10 *Minor fixes. Release 1.6.2.0 rel-kernel-arm 03_16-2017 f/w 1.5.14 or above ============= *Synced with linux sources tree. *Fixed checksumm offloads for IPv6. *Added support for ARM. *Support for kernels 4.4, 4.8, 4.9 *Minor fixes. Release 1.5.345.0 rel-kernel-b0-v3 01_19-2017 f/w 1.5.14 or above ============= *Linux upstream fixes *Add fw version checking *Fix pm-resume crash. Release 1.5.335.0 rel-kernel-b0-v3 01_09-2017 f/w 1.5.14 or above ============= *Linux upstream fixes Release 1.5.324.0 dev-pb-b0-cln-2 12_17-2016 f/w 1.5.14 or above ============= *hibernate fix *Minor fixes and code cleanup Release 1.5.300.0 dev-pb-b0-cln 12_06-2016 f/w 1.5.14 or above ============= *d109 pid support *Minor fixes and code cleanup Release 1.5.248.3 dev-pb-b0-clean 11-30-2016 f/w 1.5.14 or above ============= * fix change link speed while NIC down. Release 1.5.247.3 dev-pb-b0-clean 11-30-2016 f/w 1.5.14 or above ============= * fix netif status Release 1.5.246.3 dev-pb-b0-clean 11-29-2016 f/w 1.5.14 or above ============= +Felicity PID support *Updated TX/RX throttling params *Minor fixes and code cleanup Release 1.5.245.3 dev-pb-b0-clean 11-23-2016 f/w 1.5.14 or above ============= +CSO error workaround (Bug #701) +ifconfig filter support (promisc/multicast/broadcast/allmulti) +Minor fixes and code cleanup Release 1.5.244.3 dev-pb-b0-clean 11-19-2016 f/w 1.5.14 or above ============ * Fix #701 workaround Release 1.5.243.3 dev-pb-b0-clean 11-16-2016 f/w 1.5.14 or above ============ +improved ethtool statistics Release 1.5.239.3 dev-pb-b0-clean 11-11-2016 f/w 1.5.14 or above ============ +NAPI compliance fix +Hot unplug fix +Minor fixes and code cleanup Release 1.5.210.3 dev-pb-b0-clean 11-03-2016 f/w 1.5.14 or above ============ +Fixed Jumbo frames. +RSS fixes (new hash key, print RSS settings via ethtool) +Minor fixes and code cleanup Release 1.5.203.3 dev-pb-b0-clean 10-31-2016 f/w 1.5.14 or above ============= +Support SuseServer 12.1 +Fixed kernel panic on CentOS 7. Release 1.5.201.3 dev-pb-b0-clean 10-29-2016 f/w 1.5.14 or above ============= +Support Centos +Minor fixes and code cleanup Release 1.5.200.3 dev-pb-b0-clean 10-29-2016 f/w 1.5.10 or above ============= +Support new VID/PID. +Fixed and tested the driver for B0 on FPGA. +Support LRO for B0 on FPGA. +Fixed link status detect. Known issues: - Build failed on Centos Release 1.5.100.3 10-22-2016 f/w 1.4 or above ============= + Ethtool statistics * Debian 6 kernel build * A0/B0 support Know issues: - Link status hardcoded always '1G connected'