/* * WUSB Wire Adapter * Data transfer and URB enqueing * * Copyright (C) 2005-2006 Intel Corporation * Inaky Perez-Gonzalez * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version * 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA * 02110-1301, USA. * * * How transfers work: get a buffer, break it up in segments (segment * size is a multiple of the maxpacket size). For each segment issue a * segment request (struct wa_xfer_*), then send the data buffer if * out or nothing if in (all over the DTO endpoint). * * For each submitted segment request, a notification will come over * the NEP endpoint and a transfer result (struct xfer_result) will * arrive in the DTI URB. Read it, get the xfer ID, see if there is * data coming (inbound transfer), schedule a read and handle it. * * Sounds simple, it is a pain to implement. * * * ENTRY POINTS * * FIXME * * LIFE CYCLE / STATE DIAGRAM * * FIXME * * THIS CODE IS DISGUSTING * * Warned you are; it's my second try and still not happy with it. * * NOTES: * * - No iso * * - Supports DMA xfers, control, bulk and maybe interrupt * * - Does not recycle unused rpipes * * An rpipe is assigned to an endpoint the first time it is used, * and then it's there, assigned, until the endpoint is disabled * (destroyed [{h,d}wahc_op_ep_disable()]. The assignment of the * rpipe to the endpoint is done under the wa->rpipe_sem semaphore * (should be a mutex). * * Two methods it could be done: * * (a) set up a timer every time an rpipe's use count drops to 1 * (which means unused) or when a transfer ends. Reset the * timer when a xfer is queued. If the timer expires, release * the rpipe [see rpipe_ep_disable()]. * * (b) when looking for free rpipes to attach [rpipe_get_by_ep()], * when none are found go over the list, check their endpoint * and their activity record (if no last-xfer-done-ts in the * last x seconds) take it * * However, due to the fact that we have a set of limited * resources (max-segments-at-the-same-time per xfer, * xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end * we are going to have to rebuild all this based on an scheduler, * to where we have a list of transactions to do and based on the * availability of the different required components (blocks, * rpipes, segment slots, etc), we go scheduling them. Painful. */ #include #include #include #include #include #include #include "wa-hc.h" #include "wusbhc.h" enum { /* [WUSB] section 8.3.3 allocates 7 bits for the segment index. */ WA_SEGS_MAX = 128, }; enum wa_seg_status { WA_SEG_NOTREADY, WA_SEG_READY, WA_SEG_DELAYED, WA_SEG_SUBMITTED, WA_SEG_PENDING, WA_SEG_DTI_PENDING, WA_SEG_DONE, WA_SEG_ERROR, WA_SEG_ABORTED, }; static void wa_xfer_delayed_run(struct wa_rpipe *); static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting); /* * Life cycle governed by 'struct urb' (the refcount of the struct is * that of the 'struct urb' and usb_free_urb() would free the whole * struct). */ struct wa_seg { struct urb tr_urb; /* transfer request urb. */ struct urb *isoc_pack_desc_urb; /* for isoc packet descriptor. */ struct urb *dto_urb; /* for data output. */ struct list_head list_node; /* for rpipe->req_list */ struct wa_xfer *xfer; /* out xfer */ u8 index; /* which segment we are */ int isoc_frame_count; /* number of isoc frames in this segment. */ int isoc_frame_offset; /* starting frame offset in the xfer URB. */ /* Isoc frame that the current transfer buffer corresponds to. */ int isoc_frame_index; int isoc_size; /* size of all isoc frames sent by this seg. */ enum wa_seg_status status; ssize_t result; /* bytes xfered or error */ struct wa_xfer_hdr xfer_hdr; }; static inline void wa_seg_init(struct wa_seg *seg) { usb_init_urb(&seg->tr_urb); /* set the remaining memory to 0. */ memset(((void *)seg) + sizeof(seg->tr_urb), 0, sizeof(*seg) - sizeof(seg->tr_urb)); } /* * Protected by xfer->lock * */ struct wa_xfer { struct kref refcnt; struct list_head list_node; spinlock_t lock; u32 id; struct wahc *wa; /* Wire adapter we are plugged to */ struct usb_host_endpoint *ep; struct urb *urb; /* URB we are transferring for */ struct wa_seg **seg; /* transfer segments */ u8 segs, segs_submitted, segs_done; unsigned is_inbound:1; unsigned is_dma:1; size_t seg_size; int result; gfp_t gfp; /* allocation mask */ struct wusb_dev *wusb_dev; /* for activity timestamps */ }; static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, struct wa_seg *seg, int curr_iso_frame); static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, int starting_index, enum wa_seg_status status); static inline void wa_xfer_init(struct wa_xfer *xfer) { kref_init(&xfer->refcnt); INIT_LIST_HEAD(&xfer->list_node); spin_lock_init(&xfer->lock); } /* * Destroy a transfer structure * * Note that freeing xfer->seg[cnt]->tr_urb will free the containing * xfer->seg[cnt] memory that was allocated by __wa_xfer_setup_segs. */ static void wa_xfer_destroy(struct kref *_xfer) { struct wa_xfer *xfer = container_of(_xfer, struct wa_xfer, refcnt); if (xfer->seg) { unsigned cnt; for (cnt = 0; cnt < xfer->segs; cnt++) { struct wa_seg *seg = xfer->seg[cnt]; if (seg) { usb_free_urb(seg->isoc_pack_desc_urb); if (seg->dto_urb) { kfree(seg->dto_urb->sg); usb_free_urb(seg->dto_urb); } usb_free_urb(&seg->tr_urb); } } kfree(xfer->seg); } kfree(xfer); } static void wa_xfer_get(struct wa_xfer *xfer) { kref_get(&xfer->refcnt); } static void wa_xfer_put(struct wa_xfer *xfer) { kref_put(&xfer->refcnt, wa_xfer_destroy); } /* * Try to get exclusive access to the DTO endpoint resource. Return true * if successful. */ static inline int __wa_dto_try_get(struct wahc *wa) { return (test_and_set_bit(0, &wa->dto_in_use) == 0); } /* Release the DTO endpoint resource. */ static inline void __wa_dto_put(struct wahc *wa) { clear_bit_unlock(0, &wa->dto_in_use); } /* Service RPIPEs that are waiting on the DTO resource. */ static void wa_check_for_delayed_rpipes(struct wahc *wa) { unsigned long flags; int dto_waiting = 0; struct wa_rpipe *rpipe; spin_lock_irqsave(&wa->rpipe_lock, flags); while (!list_empty(&wa->rpipe_delayed_list) && !dto_waiting) { rpipe = list_first_entry(&wa->rpipe_delayed_list, struct wa_rpipe, list_node); __wa_xfer_delayed_run(rpipe, &dto_waiting); /* remove this RPIPE from the list if it is not waiting. */ if (!dto_waiting) { pr_debug("%s: RPIPE %d serviced and removed from delayed list.\n", __func__, le16_to_cpu(rpipe->descr.wRPipeIndex)); list_del_init(&rpipe->list_node); } } spin_unlock_irqrestore(&wa->rpipe_lock, flags); } /* add this RPIPE to the end of the delayed RPIPE list. */ static void wa_add_delayed_rpipe(struct wahc *wa, struct wa_rpipe *rpipe) { unsigned long flags; spin_lock_irqsave(&wa->rpipe_lock, flags); /* add rpipe to the list if it is not already on it. */ if (list_empty(&rpipe->list_node)) { pr_debug("%s: adding RPIPE %d to the delayed list.\n", __func__, le16_to_cpu(rpipe->descr.wRPipeIndex)); list_add_tail(&rpipe->list_node, &wa->rpipe_delayed_list); } spin_unlock_irqrestore(&wa->rpipe_lock, flags); } /* * xfer is referenced * * xfer->lock has to be unlocked * * We take xfer->lock for setting the result; this is a barrier * against drivers/usb/core/hcd.c:unlink1() being called after we call * usb_hcd_giveback_urb() and wa_urb_dequeue() trying to get a * reference to the transfer. */ static void wa_xfer_giveback(struct wa_xfer *xfer) { unsigned long flags; spin_lock_irqsave(&xfer->wa->xfer_list_lock, flags); list_del_init(&xfer->list_node); usb_hcd_unlink_urb_from_ep(&(xfer->wa->wusb->usb_hcd), xfer->urb); spin_unlock_irqrestore(&xfer->wa->xfer_list_lock, flags); /* FIXME: segmentation broken -- kills DWA */ wusbhc_giveback_urb(xfer->wa->wusb, xfer->urb, xfer->result); wa_put(xfer->wa); wa_xfer_put(xfer); } /* * xfer is referenced * * xfer->lock has to be unlocked */ static void wa_xfer_completion(struct wa_xfer *xfer) { if (xfer->wusb_dev) wusb_dev_put(xfer->wusb_dev); rpipe_put(xfer->ep->hcpriv); wa_xfer_giveback(xfer); } /* * Initialize a transfer's ID * * We need to use a sequential number; if we use the pointer or the * hash of the pointer, it can repeat over sequential transfers and * then it will confuse the HWA....wonder why in hell they put a 32 * bit handle in there then. */ static void wa_xfer_id_init(struct wa_xfer *xfer) { xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count); } /* Return the xfer's ID. */ static inline u32 wa_xfer_id(struct wa_xfer *xfer) { return xfer->id; } /* Return the xfer's ID in transport format (little endian). */ static inline __le32 wa_xfer_id_le32(struct wa_xfer *xfer) { return cpu_to_le32(xfer->id); } /* * If transfer is done, wrap it up and return true * * xfer->lock has to be locked */ static unsigned __wa_xfer_is_done(struct wa_xfer *xfer) { struct device *dev = &xfer->wa->usb_iface->dev; unsigned result, cnt; struct wa_seg *seg; struct urb *urb = xfer->urb; unsigned found_short = 0; result = xfer->segs_done == xfer->segs_submitted; if (result == 0) goto out; urb->actual_length = 0; for (cnt = 0; cnt < xfer->segs; cnt++) { seg = xfer->seg[cnt]; switch (seg->status) { case WA_SEG_DONE: if (found_short && seg->result > 0) { dev_dbg(dev, "xfer %p ID %08X#%u: bad short segments (%zu)\n", xfer, wa_xfer_id(xfer), cnt, seg->result); urb->status = -EINVAL; goto out; } urb->actual_length += seg->result; if (!(usb_pipeisoc(xfer->urb->pipe)) && seg->result < xfer->seg_size && cnt != xfer->segs-1) found_short = 1; dev_dbg(dev, "xfer %p ID %08X#%u: DONE short %d " "result %zu urb->actual_length %d\n", xfer, wa_xfer_id(xfer), seg->index, found_short, seg->result, urb->actual_length); break; case WA_SEG_ERROR: xfer->result = seg->result; dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zi(0x%08zX)\n", xfer, wa_xfer_id(xfer), seg->index, seg->result, seg->result); goto out; case WA_SEG_ABORTED: xfer->result = seg->result; dev_dbg(dev, "xfer %p ID %08X#%u: ABORTED result %zi(0x%08zX)\n", xfer, wa_xfer_id(xfer), seg->index, seg->result, seg->result); goto out; default: dev_warn(dev, "xfer %p ID %08X#%u: is_done bad state %d\n", xfer, wa_xfer_id(xfer), cnt, seg->status); xfer->result = -EINVAL; goto out; } } xfer->result = 0; out: return result; } /* * Mark the given segment as done. Return true if this completes the xfer. * This should only be called for segs that have been submitted to an RPIPE. * Delayed segs are not marked as submitted so they do not need to be marked * as done when cleaning up. * * xfer->lock has to be locked */ static unsigned __wa_xfer_mark_seg_as_done(struct wa_xfer *xfer, struct wa_seg *seg, enum wa_seg_status status) { seg->status = status; xfer->segs_done++; /* check for done. */ return __wa_xfer_is_done(xfer); } /* * Search for a transfer list ID on the HCD's URB list * * For 32 bit architectures, we use the pointer itself; for 64 bits, a * 32-bit hash of the pointer. * * @returns NULL if not found. */ static struct wa_xfer *wa_xfer_get_by_id(struct wahc *wa, u32 id) { unsigned long flags; struct wa_xfer *xfer_itr; spin_lock_irqsave(&wa->xfer_list_lock, flags); list_for_each_entry(xfer_itr, &wa->xfer_list, list_node) { if (id == xfer_itr->id) { wa_xfer_get(xfer_itr); goto out; } } xfer_itr = NULL; out: spin_unlock_irqrestore(&wa->xfer_list_lock, flags); return xfer_itr; } struct wa_xfer_abort_buffer { struct urb urb; struct wahc *wa; struct wa_xfer_abort cmd; }; static void __wa_xfer_abort_cb(struct urb *urb) { struct wa_xfer_abort_buffer *b = urb->context; struct wahc *wa = b->wa; /* * If the abort request URB failed, then the HWA did not get the abort * command. Forcibly clean up the xfer without waiting for a Transfer * Result from the HWA. */ if (urb->status < 0) { struct wa_xfer *xfer; struct device *dev = &wa->usb_iface->dev; xfer = wa_xfer_get_by_id(wa, le32_to_cpu(b->cmd.dwTransferID)); dev_err(dev, "%s: Transfer Abort request failed. result: %d\n", __func__, urb->status); if (xfer) { unsigned long flags; int done, seg_index = 0; struct wa_rpipe *rpipe = xfer->ep->hcpriv; dev_err(dev, "%s: cleaning up xfer %p ID 0x%08X.\n", __func__, xfer, wa_xfer_id(xfer)); spin_lock_irqsave(&xfer->lock, flags); /* skip done segs. */ while (seg_index < xfer->segs) { struct wa_seg *seg = xfer->seg[seg_index]; if ((seg->status == WA_SEG_DONE) || (seg->status == WA_SEG_ERROR)) { ++seg_index; } else { break; } } /* mark remaining segs as aborted. */ wa_complete_remaining_xfer_segs(xfer, seg_index, WA_SEG_ABORTED); done = __wa_xfer_is_done(xfer); spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); wa_xfer_delayed_run(rpipe); wa_xfer_put(xfer); } else { dev_err(dev, "%s: xfer ID 0x%08X already gone.\n", __func__, le32_to_cpu(b->cmd.dwTransferID)); } } wa_put(wa); /* taken in __wa_xfer_abort */ usb_put_urb(&b->urb); } /* * Aborts an ongoing transaction * * Assumes the transfer is referenced and locked and in a submitted * state (mainly that there is an endpoint/rpipe assigned). * * The callback (see above) does nothing but freeing up the data by * putting the URB. Because the URB is allocated at the head of the * struct, the whole space we allocated is kfreed. * */ static int __wa_xfer_abort(struct wa_xfer *xfer) { int result = -ENOMEM; struct device *dev = &xfer->wa->usb_iface->dev; struct wa_xfer_abort_buffer *b; struct wa_rpipe *rpipe = xfer->ep->hcpriv; b = kmalloc(sizeof(*b), GFP_ATOMIC); if (b == NULL) goto error_kmalloc; b->cmd.bLength = sizeof(b->cmd); b->cmd.bRequestType = WA_XFER_ABORT; b->cmd.wRPipe = rpipe->descr.wRPipeIndex; b->cmd.dwTransferID = wa_xfer_id_le32(xfer); b->wa = wa_get(xfer->wa); usb_init_urb(&b->urb); usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev, usb_sndbulkpipe(xfer->wa->usb_dev, xfer->wa->dto_epd->bEndpointAddress), &b->cmd, sizeof(b->cmd), __wa_xfer_abort_cb, b); result = usb_submit_urb(&b->urb, GFP_ATOMIC); if (result < 0) goto error_submit; return result; /* callback frees! */ error_submit: wa_put(xfer->wa); if (printk_ratelimit()) dev_err(dev, "xfer %p: Can't submit abort request: %d\n", xfer, result); kfree(b); error_kmalloc: return result; } /* * Calculate the number of isoc frames starting from isoc_frame_offset * that will fit a in transfer segment. */ static int __wa_seg_calculate_isoc_frame_count(struct wa_xfer *xfer, int isoc_frame_offset, int *total_size) { int segment_size = 0, frame_count = 0; int index = isoc_frame_offset; struct usb_iso_packet_descriptor *iso_frame_desc = xfer->urb->iso_frame_desc; while ((index < xfer->urb->number_of_packets) && ((segment_size + iso_frame_desc[index].length) <= xfer->seg_size)) { /* * For Alereon HWA devices, only include an isoc frame in an * out segment if it is physically contiguous with the previous * frame. This is required because those devices expect * the isoc frames to be sent as a single USB transaction as * opposed to one transaction per frame with standard HWA. */ if ((xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) && (xfer->is_inbound == 0) && (index > isoc_frame_offset) && ((iso_frame_desc[index - 1].offset + iso_frame_desc[index - 1].length) != iso_frame_desc[index].offset)) break; /* this frame fits. count it. */ ++frame_count; segment_size += iso_frame_desc[index].length; /* move to the next isoc frame. */ ++index; } *total_size = segment_size; return frame_count; } /* * * @returns < 0 on error, transfer segment request size if ok */ static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer, enum wa_xfer_type *pxfer_type) { ssize_t result; struct device *dev = &xfer->wa->usb_iface->dev; size_t maxpktsize; struct urb *urb = xfer->urb; struct wa_rpipe *rpipe = xfer->ep->hcpriv; switch (rpipe->descr.bmAttribute & 0x3) { case USB_ENDPOINT_XFER_CONTROL: *pxfer_type = WA_XFER_TYPE_CTL; result = sizeof(struct wa_xfer_ctl); break; case USB_ENDPOINT_XFER_INT: case USB_ENDPOINT_XFER_BULK: *pxfer_type = WA_XFER_TYPE_BI; result = sizeof(struct wa_xfer_bi); break; case USB_ENDPOINT_XFER_ISOC: *pxfer_type = WA_XFER_TYPE_ISO; result = sizeof(struct wa_xfer_hwaiso); break; default: /* never happens */ BUG(); result = -EINVAL; /* shut gcc up */ } xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0; xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0; maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize); xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks) * 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1); /* Compute the segment size and make sure it is a multiple of * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of * a check (FIXME) */ if (xfer->seg_size < maxpktsize) { dev_err(dev, "HW BUG? seg_size %zu smaller than maxpktsize %zu\n", xfer->seg_size, maxpktsize); result = -EINVAL; goto error; } xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize; if ((rpipe->descr.bmAttribute & 0x3) == USB_ENDPOINT_XFER_ISOC) { int index = 0; xfer->segs = 0; /* * loop over urb->number_of_packets to determine how many * xfer segments will be needed to send the isoc frames. */ while (index < urb->number_of_packets) { int seg_size; /* don't care. */ index += __wa_seg_calculate_isoc_frame_count(xfer, index, &seg_size); ++xfer->segs; } } else { xfer->segs = DIV_ROUND_UP(urb->transfer_buffer_length, xfer->seg_size); if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL) xfer->segs = 1; } if (xfer->segs > WA_SEGS_MAX) { dev_err(dev, "BUG? oops, number of segments %zu bigger than %d\n", (urb->transfer_buffer_length/xfer->seg_size), WA_SEGS_MAX); result = -EINVAL; goto error; } error: return result; } static void __wa_setup_isoc_packet_descr( struct wa_xfer_packet_info_hwaiso *packet_desc, struct wa_xfer *xfer, struct wa_seg *seg) { struct usb_iso_packet_descriptor *iso_frame_desc = xfer->urb->iso_frame_desc; int frame_index; /* populate isoc packet descriptor. */ packet_desc->bPacketType = WA_XFER_ISO_PACKET_INFO; packet_desc->wLength = cpu_to_le16(sizeof(*packet_desc) + (sizeof(packet_desc->PacketLength[0]) * seg->isoc_frame_count)); for (frame_index = 0; frame_index < seg->isoc_frame_count; ++frame_index) { int offset_index = frame_index + seg->isoc_frame_offset; packet_desc->PacketLength[frame_index] = cpu_to_le16(iso_frame_desc[offset_index].length); } } /* Fill in the common request header and xfer-type specific data. */ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, struct wa_xfer_hdr *xfer_hdr0, enum wa_xfer_type xfer_type, size_t xfer_hdr_size) { struct wa_rpipe *rpipe = xfer->ep->hcpriv; struct wa_seg *seg = xfer->seg[0]; xfer_hdr0 = &seg->xfer_hdr; xfer_hdr0->bLength = xfer_hdr_size; xfer_hdr0->bRequestType = xfer_type; xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex; xfer_hdr0->dwTransferID = wa_xfer_id_le32(xfer); xfer_hdr0->bTransferSegment = 0; switch (xfer_type) { case WA_XFER_TYPE_CTL: { struct wa_xfer_ctl *xfer_ctl = container_of(xfer_hdr0, struct wa_xfer_ctl, hdr); xfer_ctl->bmAttribute = xfer->is_inbound ? 1 : 0; memcpy(&xfer_ctl->baSetupData, xfer->urb->setup_packet, sizeof(xfer_ctl->baSetupData)); break; } case WA_XFER_TYPE_BI: break; case WA_XFER_TYPE_ISO: { struct wa_xfer_hwaiso *xfer_iso = container_of(xfer_hdr0, struct wa_xfer_hwaiso, hdr); struct wa_xfer_packet_info_hwaiso *packet_desc = ((void *)xfer_iso) + xfer_hdr_size; /* populate the isoc section of the transfer request. */ xfer_iso->dwNumOfPackets = cpu_to_le32(seg->isoc_frame_count); /* populate isoc packet descriptor. */ __wa_setup_isoc_packet_descr(packet_desc, xfer, seg); break; } default: BUG(); }; } /* * Callback for the OUT data phase of the segment request * * Check wa_seg_tr_cb(); most comments also apply here because this * function does almost the same thing and they work closely * together. * * If the seg request has failed but this DTO phase has succeeded, * wa_seg_tr_cb() has already failed the segment and moved the * status to WA_SEG_ERROR, so this will go through 'case 0' and * effectively do nothing. */ static void wa_seg_dto_cb(struct urb *urb) { struct wa_seg *seg = urb->context; struct wa_xfer *xfer = seg->xfer; struct wahc *wa; struct device *dev; struct wa_rpipe *rpipe; unsigned long flags; unsigned rpipe_ready = 0; int data_send_done = 1, release_dto = 0, holding_dto = 0; u8 done = 0; int result; /* free the sg if it was used. */ kfree(urb->sg); urb->sg = NULL; spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; if (usb_pipeisoc(xfer->urb->pipe)) { /* Alereon HWA sends all isoc frames in a single transfer. */ if (wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) seg->isoc_frame_index += seg->isoc_frame_count; else seg->isoc_frame_index += 1; if (seg->isoc_frame_index < seg->isoc_frame_count) { data_send_done = 0; holding_dto = 1; /* checked in error cases. */ /* * if this is the last isoc frame of the segment, we * can release DTO after sending this frame. */ if ((seg->isoc_frame_index + 1) >= seg->isoc_frame_count) release_dto = 1; } dev_dbg(dev, "xfer 0x%08X#%u: isoc frame = %d, holding_dto = %d, release_dto = %d.\n", wa_xfer_id(xfer), seg->index, seg->isoc_frame_index, holding_dto, release_dto); } spin_unlock_irqrestore(&xfer->lock, flags); switch (urb->status) { case 0: spin_lock_irqsave(&xfer->lock, flags); seg->result += urb->actual_length; if (data_send_done) { dev_dbg(dev, "xfer 0x%08X#%u: data out done (%zu bytes)\n", wa_xfer_id(xfer), seg->index, seg->result); if (seg->status < WA_SEG_PENDING) seg->status = WA_SEG_PENDING; } else { /* should only hit this for isoc xfers. */ /* * Populate the dto URB with the next isoc frame buffer, * send the URB and release DTO if we no longer need it. */ __wa_populate_dto_urb_isoc(xfer, seg, seg->isoc_frame_offset + seg->isoc_frame_index); /* resubmit the URB with the next isoc frame. */ /* take a ref on resubmit. */ wa_xfer_get(xfer); result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); if (result < 0) { dev_err(dev, "xfer 0x%08X#%u: DTO submit failed: %d\n", wa_xfer_id(xfer), seg->index, result); spin_unlock_irqrestore(&xfer->lock, flags); goto error_dto_submit; } } spin_unlock_irqrestore(&xfer->lock, flags); if (release_dto) { __wa_dto_put(wa); wa_check_for_delayed_rpipes(wa); } break; case -ECONNRESET: /* URB unlinked; no need to do anything */ case -ENOENT: /* as it was done by the who unlinked us */ if (holding_dto) { __wa_dto_put(wa); wa_check_for_delayed_rpipes(wa); } break; default: /* Other errors ... */ dev_err(dev, "xfer 0x%08X#%u: data out error %d\n", wa_xfer_id(xfer), seg->index, urb->status); goto error_default; } /* taken when this URB was submitted. */ wa_xfer_put(xfer); return; error_dto_submit: /* taken on resubmit attempt. */ wa_xfer_put(xfer); error_default: spin_lock_irqsave(&xfer->lock, flags); rpipe = xfer->ep->hcpriv; if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)){ dev_err(dev, "DTO: URB max acceptable errors exceeded, resetting device\n"); wa_reset_all(wa); } if (seg->status != WA_SEG_ERROR) { seg->result = urb->status; __wa_xfer_abort(xfer); rpipe_ready = rpipe_avail_inc(rpipe); done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR); } spin_unlock_irqrestore(&xfer->lock, flags); if (holding_dto) { __wa_dto_put(wa); wa_check_for_delayed_rpipes(wa); } if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); /* taken when this URB was submitted. */ wa_xfer_put(xfer); } /* * Callback for the isoc packet descriptor phase of the segment request * * Check wa_seg_tr_cb(); most comments also apply here because this * function does almost the same thing and they work closely * together. * * If the seg request has failed but this phase has succeeded, * wa_seg_tr_cb() has already failed the segment and moved the * status to WA_SEG_ERROR, so this will go through 'case 0' and * effectively do nothing. */ static void wa_seg_iso_pack_desc_cb(struct urb *urb) { struct wa_seg *seg = urb->context; struct wa_xfer *xfer = seg->xfer; struct wahc *wa; struct device *dev; struct wa_rpipe *rpipe; unsigned long flags; unsigned rpipe_ready = 0; u8 done = 0; switch (urb->status) { case 0: spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; dev_dbg(dev, "iso xfer %08X#%u: packet descriptor done\n", wa_xfer_id(xfer), seg->index); if (xfer->is_inbound && seg->status < WA_SEG_PENDING) seg->status = WA_SEG_PENDING; spin_unlock_irqrestore(&xfer->lock, flags); break; case -ECONNRESET: /* URB unlinked; no need to do anything */ case -ENOENT: /* as it was done by the who unlinked us */ break; default: /* Other errors ... */ spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; rpipe = xfer->ep->hcpriv; pr_err_ratelimited("iso xfer %08X#%u: packet descriptor error %d\n", wa_xfer_id(xfer), seg->index, urb->status); if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)){ dev_err(dev, "iso xfer: URB max acceptable errors exceeded, resetting device\n"); wa_reset_all(wa); } if (seg->status != WA_SEG_ERROR) { usb_unlink_urb(seg->dto_urb); seg->result = urb->status; __wa_xfer_abort(xfer); rpipe_ready = rpipe_avail_inc(rpipe); done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR); } spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); } /* taken when this URB was submitted. */ wa_xfer_put(xfer); } /* * Callback for the segment request * * If successful transition state (unless already transitioned or * outbound transfer); otherwise, take a note of the error, mark this * segment done and try completion. * * Note we don't access until we are sure that the transfer hasn't * been cancelled (ECONNRESET, ENOENT), which could mean that * seg->xfer could be already gone. * * We have to check before setting the status to WA_SEG_PENDING * because sometimes the xfer result callback arrives before this * callback (geeeeeeze), so it might happen that we are already in * another state. As well, we don't set it if the transfer is not inbound, * as in that case, wa_seg_dto_cb will do it when the OUT data phase * finishes. */ static void wa_seg_tr_cb(struct urb *urb) { struct wa_seg *seg = urb->context; struct wa_xfer *xfer = seg->xfer; struct wahc *wa; struct device *dev; struct wa_rpipe *rpipe; unsigned long flags; unsigned rpipe_ready; u8 done = 0; switch (urb->status) { case 0: spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; dev_dbg(dev, "xfer %p ID 0x%08X#%u: request done\n", xfer, wa_xfer_id(xfer), seg->index); if (xfer->is_inbound && seg->status < WA_SEG_PENDING && !(usb_pipeisoc(xfer->urb->pipe))) seg->status = WA_SEG_PENDING; spin_unlock_irqrestore(&xfer->lock, flags); break; case -ECONNRESET: /* URB unlinked; no need to do anything */ case -ENOENT: /* as it was done by the who unlinked us */ break; default: /* Other errors ... */ spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; rpipe = xfer->ep->hcpriv; if (printk_ratelimit()) dev_err(dev, "xfer %p ID 0x%08X#%u: request error %d\n", xfer, wa_xfer_id(xfer), seg->index, urb->status); if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)){ dev_err(dev, "DTO: URB max acceptable errors " "exceeded, resetting device\n"); wa_reset_all(wa); } usb_unlink_urb(seg->isoc_pack_desc_urb); usb_unlink_urb(seg->dto_urb); seg->result = urb->status; __wa_xfer_abort(xfer); rpipe_ready = rpipe_avail_inc(rpipe); done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR); spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); } /* taken when this URB was submitted. */ wa_xfer_put(xfer); } /* * Allocate an SG list to store bytes_to_transfer bytes and copy the * subset of the in_sg that matches the buffer subset * we are about to transfer. */ static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg, const unsigned int bytes_transferred, const unsigned int bytes_to_transfer, int *out_num_sgs) { struct scatterlist *out_sg; unsigned int bytes_processed = 0, offset_into_current_page_data = 0, nents; struct scatterlist *current_xfer_sg = in_sg; struct scatterlist *current_seg_sg, *last_seg_sg; /* skip previously transferred pages. */ while ((current_xfer_sg) && (bytes_processed < bytes_transferred)) { bytes_processed += current_xfer_sg->length; /* advance the sg if current segment starts on or past the next page. */ if (bytes_processed <= bytes_transferred) current_xfer_sg = sg_next(current_xfer_sg); } /* the data for the current segment starts in current_xfer_sg. calculate the offset. */ if (bytes_processed > bytes_transferred) { offset_into_current_page_data = current_xfer_sg->length - (bytes_processed - bytes_transferred); } /* calculate the number of pages needed by this segment. */ nents = DIV_ROUND_UP((bytes_to_transfer + offset_into_current_page_data + current_xfer_sg->offset), PAGE_SIZE); out_sg = kmalloc((sizeof(struct scatterlist) * nents), GFP_ATOMIC); if (out_sg) { sg_init_table(out_sg, nents); /* copy the portion of the incoming SG that correlates to the * data to be transferred by this segment to the segment SG. */ last_seg_sg = current_seg_sg = out_sg; bytes_processed = 0; /* reset nents and calculate the actual number of sg entries needed. */ nents = 0; while ((bytes_processed < bytes_to_transfer) && current_seg_sg && current_xfer_sg) { unsigned int page_len = min((current_xfer_sg->length - offset_into_current_page_data), (bytes_to_transfer - bytes_processed)); sg_set_page(current_seg_sg, sg_page(current_xfer_sg), page_len, current_xfer_sg->offset + offset_into_current_page_data); bytes_processed += page_len; last_seg_sg = current_seg_sg; current_seg_sg = sg_next(current_seg_sg); current_xfer_sg = sg_next(current_xfer_sg); /* only the first page may require additional offset. */ offset_into_current_page_data = 0; nents++; } /* update num_sgs and terminate the list since we may have * concatenated pages. */ sg_mark_end(last_seg_sg); *out_num_sgs = nents; } return out_sg; } /* * Populate DMA buffer info for the isoc dto urb. */ static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, struct wa_seg *seg, int curr_iso_frame) { seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; seg->dto_urb->sg = NULL; seg->dto_urb->num_sgs = 0; /* dto urb buffer address pulled from iso_frame_desc. */ seg->dto_urb->transfer_dma = xfer->urb->transfer_dma + xfer->urb->iso_frame_desc[curr_iso_frame].offset; /* The Alereon HWA sends a single URB with all isoc segs. */ if (xfer->wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) seg->dto_urb->transfer_buffer_length = seg->isoc_size; else seg->dto_urb->transfer_buffer_length = xfer->urb->iso_frame_desc[curr_iso_frame].length; } /* * Populate buffer ptr and size, DMA buffer or SG list for the dto urb. */ static int __wa_populate_dto_urb(struct wa_xfer *xfer, struct wa_seg *seg, size_t buf_itr_offset, size_t buf_itr_size) { int result = 0; if (xfer->is_dma) { seg->dto_urb->transfer_dma = xfer->urb->transfer_dma + buf_itr_offset; seg->dto_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; seg->dto_urb->sg = NULL; seg->dto_urb->num_sgs = 0; } else { /* do buffer or SG processing. */ seg->dto_urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP; /* this should always be 0 before a resubmit. */ seg->dto_urb->num_mapped_sgs = 0; if (xfer->urb->transfer_buffer) { seg->dto_urb->transfer_buffer = xfer->urb->transfer_buffer + buf_itr_offset; seg->dto_urb->sg = NULL; seg->dto_urb->num_sgs = 0; } else { seg->dto_urb->transfer_buffer = NULL; /* * allocate an SG list to store seg_size bytes * and copy the subset of the xfer->urb->sg that * matches the buffer subset we are about to * read. */ seg->dto_urb->sg = wa_xfer_create_subset_sg( xfer->urb->sg, buf_itr_offset, buf_itr_size, &(seg->dto_urb->num_sgs)); if (!(seg->dto_urb->sg)) result = -ENOMEM; } } seg->dto_urb->transfer_buffer_length = buf_itr_size; return result; } /* * Allocate the segs array and initialize each of them * * The segments are freed by wa_xfer_destroy() when the xfer use count * drops to zero; however, because each segment is given the same life * cycle as the USB URB it contains, it is actually freed by * usb_put_urb() on the contained USB URB (twisted, eh?). */ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) { int result, cnt, isoc_frame_offset = 0; size_t alloc_size = sizeof(*xfer->seg[0]) - sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size; struct usb_device *usb_dev = xfer->wa->usb_dev; const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd; struct wa_seg *seg; size_t buf_itr, buf_size, buf_itr_size; result = -ENOMEM; xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC); if (xfer->seg == NULL) goto error_segs_kzalloc; buf_itr = 0; buf_size = xfer->urb->transfer_buffer_length; for (cnt = 0; cnt < xfer->segs; cnt++) { size_t iso_pkt_descr_size = 0; int seg_isoc_frame_count = 0, seg_isoc_size = 0; /* * Adjust the size of the segment object to contain space for * the isoc packet descriptor buffer. */ if (usb_pipeisoc(xfer->urb->pipe)) { seg_isoc_frame_count = __wa_seg_calculate_isoc_frame_count(xfer, isoc_frame_offset, &seg_isoc_size); iso_pkt_descr_size = sizeof(struct wa_xfer_packet_info_hwaiso) + (seg_isoc_frame_count * sizeof(__le16)); } seg = xfer->seg[cnt] = kmalloc(alloc_size + iso_pkt_descr_size, GFP_ATOMIC); if (seg == NULL) goto error_seg_kmalloc; wa_seg_init(seg); seg->xfer = xfer; seg->index = cnt; usb_fill_bulk_urb(&seg->tr_urb, usb_dev, usb_sndbulkpipe(usb_dev, dto_epd->bEndpointAddress), &seg->xfer_hdr, xfer_hdr_size, wa_seg_tr_cb, seg); buf_itr_size = min(buf_size, xfer->seg_size); if (usb_pipeisoc(xfer->urb->pipe)) { seg->isoc_frame_count = seg_isoc_frame_count; seg->isoc_frame_offset = isoc_frame_offset; seg->isoc_size = seg_isoc_size; /* iso packet descriptor. */ seg->isoc_pack_desc_urb = usb_alloc_urb(0, GFP_ATOMIC); if (seg->isoc_pack_desc_urb == NULL) goto error_iso_pack_desc_alloc; /* * The buffer for the isoc packet descriptor starts * after the transfer request header in the * segment object memory buffer. */ usb_fill_bulk_urb( seg->isoc_pack_desc_urb, usb_dev, usb_sndbulkpipe(usb_dev, dto_epd->bEndpointAddress), (void *)(&seg->xfer_hdr) + xfer_hdr_size, iso_pkt_descr_size, wa_seg_iso_pack_desc_cb, seg); /* adjust starting frame offset for next seg. */ isoc_frame_offset += seg_isoc_frame_count; } if (xfer->is_inbound == 0 && buf_size > 0) { /* outbound data. */ seg->dto_urb = usb_alloc_urb(0, GFP_ATOMIC); if (seg->dto_urb == NULL) goto error_dto_alloc; usb_fill_bulk_urb( seg->dto_urb, usb_dev, usb_sndbulkpipe(usb_dev, dto_epd->bEndpointAddress), NULL, 0, wa_seg_dto_cb, seg); if (usb_pipeisoc(xfer->urb->pipe)) { /* * Fill in the xfer buffer information for the * first isoc frame. Subsequent frames in this * segment will be filled in and sent from the * DTO completion routine, if needed. */ __wa_populate_dto_urb_isoc(xfer, seg, seg->isoc_frame_offset); } else { /* fill in the xfer buffer information. */ result = __wa_populate_dto_urb(xfer, seg, buf_itr, buf_itr_size); if (result < 0) goto error_seg_outbound_populate; buf_itr += buf_itr_size; buf_size -= buf_itr_size; } } seg->status = WA_SEG_READY; } return 0; /* * Free the memory for the current segment which failed to init. * Use the fact that cnt is left at were it failed. The remaining * segments will be cleaned up by wa_xfer_destroy. */ error_seg_outbound_populate: usb_free_urb(xfer->seg[cnt]->dto_urb); error_dto_alloc: usb_free_urb(xfer->seg[cnt]->isoc_pack_desc_urb); error_iso_pack_desc_alloc: kfree(xfer->seg[cnt]); xfer->seg[cnt] = NULL; error_seg_kmalloc: error_segs_kzalloc: return result; } /* * Allocates all the stuff needed to submit a transfer * * Breaks the whole data buffer in a list of segments, each one has a * structure allocated to it and linked in xfer->seg[index] * * FIXME: merge setup_segs() and the last part of this function, no * need to do two for loops when we could run everything in a * single one */ static int __wa_xfer_setup(struct wa_xfer *xfer, struct urb *urb) { int result; struct device *dev = &xfer->wa->usb_iface->dev; enum wa_xfer_type xfer_type = 0; /* shut up GCC */ size_t xfer_hdr_size, cnt, transfer_size; struct wa_xfer_hdr *xfer_hdr0, *xfer_hdr; result = __wa_xfer_setup_sizes(xfer, &xfer_type); if (result < 0) goto error_setup_sizes; xfer_hdr_size = result; result = __wa_xfer_setup_segs(xfer, xfer_hdr_size); if (result < 0) { dev_err(dev, "xfer %p: Failed to allocate %d segments: %d\n", xfer, xfer->segs, result); goto error_setup_segs; } /* Fill the first header */ xfer_hdr0 = &xfer->seg[0]->xfer_hdr; wa_xfer_id_init(xfer); __wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size); /* Fill remaining headers */ xfer_hdr = xfer_hdr0; if (xfer_type == WA_XFER_TYPE_ISO) { xfer_hdr0->dwTransferLength = cpu_to_le32(xfer->seg[0]->isoc_size); for (cnt = 1; cnt < xfer->segs; cnt++) { struct wa_xfer_packet_info_hwaiso *packet_desc; struct wa_seg *seg = xfer->seg[cnt]; struct wa_xfer_hwaiso *xfer_iso; xfer_hdr = &seg->xfer_hdr; xfer_iso = container_of(xfer_hdr, struct wa_xfer_hwaiso, hdr); packet_desc = ((void *)xfer_hdr) + xfer_hdr_size; /* * Copy values from the 0th header. Segment specific * values are set below. */ memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); xfer_hdr->bTransferSegment = cnt; xfer_hdr->dwTransferLength = cpu_to_le32(seg->isoc_size); xfer_iso->dwNumOfPackets = cpu_to_le32(seg->isoc_frame_count); __wa_setup_isoc_packet_descr(packet_desc, xfer, seg); seg->status = WA_SEG_READY; } } else { transfer_size = urb->transfer_buffer_length; xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ? cpu_to_le32(xfer->seg_size) : cpu_to_le32(transfer_size); transfer_size -= xfer->seg_size; for (cnt = 1; cnt < xfer->segs; cnt++) { xfer_hdr = &xfer->seg[cnt]->xfer_hdr; memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); xfer_hdr->bTransferSegment = cnt; xfer_hdr->dwTransferLength = transfer_size > xfer->seg_size ? cpu_to_le32(xfer->seg_size) : cpu_to_le32(transfer_size); xfer->seg[cnt]->status = WA_SEG_READY; transfer_size -= xfer->seg_size; } } xfer_hdr->bTransferSegment |= 0x80; /* this is the last segment */ result = 0; error_setup_segs: error_setup_sizes: return result; } /* * * * rpipe->seg_lock is held! */ static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, struct wa_seg *seg, int *dto_done) { int result; /* default to done unless we encounter a multi-frame isoc segment. */ *dto_done = 1; /* * Take a ref for each segment urb so the xfer cannot disappear until * all of the callbacks run. */ wa_xfer_get(xfer); /* submit the transfer request. */ seg->status = WA_SEG_SUBMITTED; result = usb_submit_urb(&seg->tr_urb, GFP_ATOMIC); if (result < 0) { pr_err("%s: xfer %p#%u: REQ submit failed: %d\n", __func__, xfer, seg->index, result); wa_xfer_put(xfer); goto error_tr_submit; } /* submit the isoc packet descriptor if present. */ if (seg->isoc_pack_desc_urb) { wa_xfer_get(xfer); result = usb_submit_urb(seg->isoc_pack_desc_urb, GFP_ATOMIC); seg->isoc_frame_index = 0; if (result < 0) { pr_err("%s: xfer %p#%u: ISO packet descriptor submit failed: %d\n", __func__, xfer, seg->index, result); wa_xfer_put(xfer); goto error_iso_pack_desc_submit; } } /* submit the out data if this is an out request. */ if (seg->dto_urb) { struct wahc *wa = xfer->wa; wa_xfer_get(xfer); result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); if (result < 0) { pr_err("%s: xfer %p#%u: DTO submit failed: %d\n", __func__, xfer, seg->index, result); wa_xfer_put(xfer); goto error_dto_submit; } /* * If this segment contains more than one isoc frame, hold * onto the dto resource until we send all frames. * Only applies to non-Alereon devices. */ if (((wa->quirks & WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC) == 0) && (seg->isoc_frame_count > 1)) *dto_done = 0; } rpipe_avail_dec(rpipe); return 0; error_dto_submit: usb_unlink_urb(seg->isoc_pack_desc_urb); error_iso_pack_desc_submit: usb_unlink_urb(&seg->tr_urb); error_tr_submit: seg->status = WA_SEG_ERROR; seg->result = result; *dto_done = 1; return result; } /* * Execute more queued request segments until the maximum concurrent allowed. * Return true if the DTO resource was acquired and released. * * The ugly unlock/lock sequence on the error path is needed as the * xfer->lock normally nests the seg_lock and not viceversa. */ static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting) { int result, dto_acquired = 0, dto_done = 0; struct device *dev = &rpipe->wa->usb_iface->dev; struct wa_seg *seg; struct wa_xfer *xfer; unsigned long flags; *dto_waiting = 0; spin_lock_irqsave(&rpipe->seg_lock, flags); while (atomic_read(&rpipe->segs_available) > 0 && !list_empty(&rpipe->seg_list) && (dto_acquired = __wa_dto_try_get(rpipe->wa))) { seg = list_first_entry(&(rpipe->seg_list), struct wa_seg, list_node); list_del(&seg->list_node); xfer = seg->xfer; /* * Get a reference to the xfer in case the callbacks for the * URBs submitted by __wa_seg_submit attempt to complete * the xfer before this function completes. */ wa_xfer_get(xfer); result = __wa_seg_submit(rpipe, xfer, seg, &dto_done); /* release the dto resource if this RPIPE is done with it. */ if (dto_done) __wa_dto_put(rpipe->wa); dev_dbg(dev, "xfer %p ID %08X#%u submitted from delayed [%d segments available] %d\n", xfer, wa_xfer_id(xfer), seg->index, atomic_read(&rpipe->segs_available), result); if (unlikely(result < 0)) { int done; spin_unlock_irqrestore(&rpipe->seg_lock, flags); spin_lock_irqsave(&xfer->lock, flags); __wa_xfer_abort(xfer); /* * This seg was marked as submitted when it was put on * the RPIPE seg_list. Mark it done. */ xfer->segs_done++; done = __wa_xfer_is_done(xfer); spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); spin_lock_irqsave(&rpipe->seg_lock, flags); } wa_xfer_put(xfer); } /* * Mark this RPIPE as waiting if dto was not acquired, there are * delayed segs and no active transfers to wake us up later. */ if (!dto_acquired && !list_empty(&rpipe->seg_list) && (atomic_read(&rpipe->segs_available) == le16_to_cpu(rpipe->descr.wRequests))) *dto_waiting = 1; spin_unlock_irqrestore(&rpipe->seg_lock, flags); return dto_done; } static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) { int dto_waiting; int dto_done = __wa_xfer_delayed_run(rpipe, &dto_waiting); /* * If this RPIPE is waiting on the DTO resource, add it to the tail of * the waiting list. * Otherwise, if the WA DTO resource was acquired and released by * __wa_xfer_delayed_run, another RPIPE may have attempted to acquire * DTO and failed during that time. Check the delayed list and process * any waiters. Start searching from the next RPIPE index. */ if (dto_waiting) wa_add_delayed_rpipe(rpipe->wa, rpipe); else if (dto_done) wa_check_for_delayed_rpipes(rpipe->wa); } /* * * xfer->lock is taken * * On failure submitting we just stop submitting and return error; * wa_urb_enqueue_b() will execute the completion path */ static int __wa_xfer_submit(struct wa_xfer *xfer) { int result, dto_acquired = 0, dto_done = 0, dto_waiting = 0; struct wahc *wa = xfer->wa; struct device *dev = &wa->usb_iface->dev; unsigned cnt; struct wa_seg *seg; unsigned long flags; struct wa_rpipe *rpipe = xfer->ep->hcpriv; size_t maxrequests = le16_to_cpu(rpipe->descr.wRequests); u8 available; u8 empty; spin_lock_irqsave(&wa->xfer_list_lock, flags); list_add_tail(&xfer->list_node, &wa->xfer_list); spin_unlock_irqrestore(&wa->xfer_list_lock, flags); BUG_ON(atomic_read(&rpipe->segs_available) > maxrequests); result = 0; spin_lock_irqsave(&rpipe->seg_lock, flags); for (cnt = 0; cnt < xfer->segs; cnt++) { int delay_seg = 1; available = atomic_read(&rpipe->segs_available); empty = list_empty(&rpipe->seg_list); seg = xfer->seg[cnt]; if (available && empty) { /* * Only attempt to acquire DTO if we have a segment * to send. */ dto_acquired = __wa_dto_try_get(rpipe->wa); if (dto_acquired) { delay_seg = 0; result = __wa_seg_submit(rpipe, xfer, seg, &dto_done); dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u submitted\n", xfer, wa_xfer_id(xfer), cnt, available, empty); if (dto_done) __wa_dto_put(rpipe->wa); if (result < 0) { __wa_xfer_abort(xfer); goto error_seg_submit; } } } if (delay_seg) { dev_dbg(dev, "xfer %p ID 0x%08X#%u: available %u empty %u delayed\n", xfer, wa_xfer_id(xfer), cnt, available, empty); seg->status = WA_SEG_DELAYED; list_add_tail(&seg->list_node, &rpipe->seg_list); } xfer->segs_submitted++; } error_seg_submit: /* * Mark this RPIPE as waiting if dto was not acquired, there are * delayed segs and no active transfers to wake us up later. */ if (!dto_acquired && !list_empty(&rpipe->seg_list) && (atomic_read(&rpipe->segs_available) == le16_to_cpu(rpipe->descr.wRequests))) dto_waiting = 1; spin_unlock_irqrestore(&rpipe->seg_lock, flags); if (dto_waiting) wa_add_delayed_rpipe(rpipe->wa, rpipe); else if (dto_done) wa_check_for_delayed_rpipes(rpipe->wa); return result; } /* * Second part of a URB/transfer enqueuement * * Assumes this comes from wa_urb_enqueue() [maybe through * wa_urb_enqueue_run()]. At this point: * * xfer->wa filled and refcounted * xfer->ep filled with rpipe refcounted if * delayed == 0 * xfer->urb filled and refcounted (this is the case when called * from wa_urb_enqueue() as we come from usb_submit_urb() * and when called by wa_urb_enqueue_run(), as we took an * extra ref dropped by _run() after we return). * xfer->gfp filled * * If we fail at __wa_xfer_submit(), then we just check if we are done * and if so, we run the completion procedure. However, if we are not * yet done, we do nothing and wait for the completion handlers from * the submitted URBs or from the xfer-result path to kick in. If xfer * result never kicks in, the xfer will timeout from the USB code and * dequeue() will be called. */ static int wa_urb_enqueue_b(struct wa_xfer *xfer) { int result; unsigned long flags; struct urb *urb = xfer->urb; struct wahc *wa = xfer->wa; struct wusbhc *wusbhc = wa->wusb; struct wusb_dev *wusb_dev; unsigned done; result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp); if (result < 0) { pr_err("%s: error_rpipe_get\n", __func__); goto error_rpipe_get; } result = -ENODEV; /* FIXME: segmentation broken -- kills DWA */ mutex_lock(&wusbhc->mutex); /* get a WUSB dev */ if (urb->dev == NULL) { mutex_unlock(&wusbhc->mutex); pr_err("%s: error usb dev gone\n", __func__); goto error_dev_gone; } wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); if (wusb_dev == NULL) { mutex_unlock(&wusbhc->mutex); dev_err(&(urb->dev->dev), "%s: error wusb dev gone\n", __func__); goto error_dev_gone; } mutex_unlock(&wusbhc->mutex); spin_lock_irqsave(&xfer->lock, flags); xfer->wusb_dev = wusb_dev; result = urb->status; if (urb->status != -EINPROGRESS) { dev_err(&(urb->dev->dev), "%s: error_dequeued\n", __func__); goto error_dequeued; } result = __wa_xfer_setup(xfer, urb); if (result < 0) { dev_err(&(urb->dev->dev), "%s: error_xfer_setup\n", __func__); goto error_xfer_setup; } /* * Get a xfer reference since __wa_xfer_submit starts asynchronous * operations that may try to complete the xfer before this function * exits. */ wa_xfer_get(xfer); result = __wa_xfer_submit(xfer); if (result < 0) { dev_err(&(urb->dev->dev), "%s: error_xfer_submit\n", __func__); goto error_xfer_submit; } spin_unlock_irqrestore(&xfer->lock, flags); wa_xfer_put(xfer); return 0; /* * this is basically wa_xfer_completion() broken up wa_xfer_giveback() * does a wa_xfer_put() that will call wa_xfer_destroy() and undo * setup(). */ error_xfer_setup: error_dequeued: spin_unlock_irqrestore(&xfer->lock, flags); /* FIXME: segmentation broken, kills DWA */ if (wusb_dev) wusb_dev_put(wusb_dev); error_dev_gone: rpipe_put(xfer->ep->hcpriv); error_rpipe_get: xfer->result = result; return result; error_xfer_submit: done = __wa_xfer_is_done(xfer); xfer->result = result; spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); wa_xfer_put(xfer); /* return success since the completion routine will run. */ return 0; } /* * Execute the delayed transfers in the Wire Adapter @wa * * We need to be careful here, as dequeue() could be called in the * middle. That's why we do the whole thing under the * wa->xfer_list_lock. If dequeue() jumps in, it first locks xfer->lock * and then checks the list -- so as we would be acquiring in inverse * order, we move the delayed list to a separate list while locked and then * submit them without the list lock held. */ void wa_urb_enqueue_run(struct work_struct *ws) { struct wahc *wa = container_of(ws, struct wahc, xfer_enqueue_work); struct wa_xfer *xfer, *next; struct urb *urb; LIST_HEAD(tmp_list); /* Create a copy of the wa->xfer_delayed_list while holding the lock */ spin_lock_irq(&wa->xfer_list_lock); list_cut_position(&tmp_list, &wa->xfer_delayed_list, wa->xfer_delayed_list.prev); spin_unlock_irq(&wa->xfer_list_lock); /* * enqueue from temp list without list lock held since wa_urb_enqueue_b * can take xfer->lock as well as lock mutexes. */ list_for_each_entry_safe(xfer, next, &tmp_list, list_node) { list_del_init(&xfer->list_node); urb = xfer->urb; if (wa_urb_enqueue_b(xfer) < 0) wa_xfer_giveback(xfer); usb_put_urb(urb); /* taken when queuing */ } } EXPORT_SYMBOL_GPL(wa_urb_enqueue_run); /* * Process the errored transfers on the Wire Adapter outside of interrupt. */ void wa_process_errored_transfers_run(struct work_struct *ws) { struct wahc *wa = container_of(ws, struct wahc, xfer_error_work); struct wa_xfer *xfer, *next; LIST_HEAD(tmp_list); pr_info("%s: Run delayed STALL processing.\n", __func__); /* Create a copy of the wa->xfer_errored_list while holding the lock */ spin_lock_irq(&wa->xfer_list_lock); list_cut_position(&tmp_list, &wa->xfer_errored_list, wa->xfer_errored_list.prev); spin_unlock_irq(&wa->xfer_list_lock); /* * run rpipe_clear_feature_stalled from temp list without list lock * held. */ list_for_each_entry_safe(xfer, next, &tmp_list, list_node) { struct usb_host_endpoint *ep; unsigned long flags; struct wa_rpipe *rpipe; spin_lock_irqsave(&xfer->lock, flags); ep = xfer->ep; rpipe = ep->hcpriv; spin_unlock_irqrestore(&xfer->lock, flags); /* clear RPIPE feature stalled without holding a lock. */ rpipe_clear_feature_stalled(wa, ep); /* complete the xfer. This removes it from the tmp list. */ wa_xfer_completion(xfer); /* check for work. */ wa_xfer_delayed_run(rpipe); } } EXPORT_SYMBOL_GPL(wa_process_errored_transfers_run); /* * Submit a transfer to the Wire Adapter in a delayed way * * The process of enqueuing involves possible sleeps() [see * enqueue_b(), for the rpipe_get() and the mutex_lock()]. If we are * in an atomic section, we defer the enqueue_b() call--else we call direct. * * @urb: We own a reference to it done by the HCI Linux USB stack that * will be given up by calling usb_hcd_giveback_urb() or by * returning error from this function -> ergo we don't have to * refcount it. */ int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep, struct urb *urb, gfp_t gfp) { int result; struct device *dev = &wa->usb_iface->dev; struct wa_xfer *xfer; unsigned long my_flags; unsigned cant_sleep = irqs_disabled() | in_atomic(); if ((urb->transfer_buffer == NULL) && (urb->sg == NULL) && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) && urb->transfer_buffer_length != 0) { dev_err(dev, "BUG? urb %p: NULL xfer buffer & NODMA\n", urb); dump_stack(); } spin_lock_irqsave(&wa->xfer_list_lock, my_flags); result = usb_hcd_link_urb_to_ep(&(wa->wusb->usb_hcd), urb); spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); if (result < 0) goto error_link_urb; result = -ENOMEM; xfer = kzalloc(sizeof(*xfer), gfp); if (xfer == NULL) goto error_kmalloc; result = -ENOENT; if (urb->status != -EINPROGRESS) /* cancelled */ goto error_dequeued; /* before starting? */ wa_xfer_init(xfer); xfer->wa = wa_get(wa); xfer->urb = urb; xfer->gfp = gfp; xfer->ep = ep; urb->hcpriv = xfer; dev_dbg(dev, "xfer %p urb %p pipe 0x%02x [%d bytes] %s %s %s\n", xfer, urb, urb->pipe, urb->transfer_buffer_length, urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? "dma" : "nodma", urb->pipe & USB_DIR_IN ? "inbound" : "outbound", cant_sleep ? "deferred" : "inline"); if (cant_sleep) { usb_get_urb(urb); spin_lock_irqsave(&wa->xfer_list_lock, my_flags); list_add_tail(&xfer->list_node, &wa->xfer_delayed_list); spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); queue_work(wusbd, &wa->xfer_enqueue_work); } else { result = wa_urb_enqueue_b(xfer); if (result < 0) { /* * URB submit/enqueue failed. Clean up, return an * error and do not run the callback. This avoids * an infinite submit/complete loop. */ dev_err(dev, "%s: URB enqueue failed: %d\n", __func__, result); wa_put(xfer->wa); wa_xfer_put(xfer); spin_lock_irqsave(&wa->xfer_list_lock, my_flags); usb_hcd_unlink_urb_from_ep(&(wa->wusb->usb_hcd), urb); spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); return result; } } return 0; error_dequeued: kfree(xfer); error_kmalloc: spin_lock_irqsave(&wa->xfer_list_lock, my_flags); usb_hcd_unlink_urb_from_ep(&(wa->wusb->usb_hcd), urb); spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); error_link_urb: return result; } EXPORT_SYMBOL_GPL(wa_urb_enqueue); /* * Dequeue a URB and make sure uwb_hcd_giveback_urb() [completion * handler] is called. * * Until a transfer goes successfully through wa_urb_enqueue() it * needs to be dequeued with completion calling; when stuck in delayed * or before wa_xfer_setup() is called, we need to do completion. * * not setup If there is no hcpriv yet, that means that that enqueue * still had no time to set the xfer up. Because * urb->status should be other than -EINPROGRESS, * enqueue() will catch that and bail out. * * If the transfer has gone through setup, we just need to clean it * up. If it has gone through submit(), we have to abort it [with an * asynch request] and then make sure we cancel each segment. * */ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status) { unsigned long flags, flags2; struct wa_xfer *xfer; struct wa_seg *seg; struct wa_rpipe *rpipe; unsigned cnt, done = 0, xfer_abort_pending; unsigned rpipe_ready = 0; int result; /* check if it is safe to unlink. */ spin_lock_irqsave(&wa->xfer_list_lock, flags); result = usb_hcd_check_unlink_urb(&(wa->wusb->usb_hcd), urb, status); if ((result == 0) && urb->hcpriv) { /* * Get a xfer ref to prevent a race with wa_xfer_giveback * cleaning up the xfer while we are working with it. */ wa_xfer_get(urb->hcpriv); } spin_unlock_irqrestore(&wa->xfer_list_lock, flags); if (result) return result; xfer = urb->hcpriv; if (xfer == NULL) return -ENOENT; spin_lock_irqsave(&xfer->lock, flags); pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer)); rpipe = xfer->ep->hcpriv; if (rpipe == NULL) { pr_debug("%s: xfer %p id 0x%08X has no RPIPE. %s", __func__, xfer, wa_xfer_id(xfer), "Probably already aborted.\n" ); result = -ENOENT; goto out_unlock; } /* * Check for done to avoid racing with wa_xfer_giveback and completing * twice. */ if (__wa_xfer_is_done(xfer)) { pr_debug("%s: xfer %p id 0x%08X already done.\n", __func__, xfer, wa_xfer_id(xfer)); result = -ENOENT; goto out_unlock; } /* Check the delayed list -> if there, release and complete */ spin_lock_irqsave(&wa->xfer_list_lock, flags2); if (!list_empty(&xfer->list_node) && xfer->seg == NULL) goto dequeue_delayed; spin_unlock_irqrestore(&wa->xfer_list_lock, flags2); if (xfer->seg == NULL) /* still hasn't reached */ goto out_unlock; /* setup(), enqueue_b() completes */ /* Ok, the xfer is in flight already, it's been setup and submitted.*/ xfer_abort_pending = __wa_xfer_abort(xfer) >= 0; /* * grab the rpipe->seg_lock here to prevent racing with * __wa_xfer_delayed_run. */ spin_lock(&rpipe->seg_lock); for (cnt = 0; cnt < xfer->segs; cnt++) { seg = xfer->seg[cnt]; pr_debug("%s: xfer id 0x%08X#%d status = %d\n", __func__, wa_xfer_id(xfer), cnt, seg->status); switch (seg->status) { case WA_SEG_NOTREADY: case WA_SEG_READY: printk(KERN_ERR "xfer %p#%u: dequeue bad state %u\n", xfer, cnt, seg->status); WARN_ON(1); break; case WA_SEG_DELAYED: /* * delete from rpipe delayed list. If no segments on * this xfer have been submitted, __wa_xfer_is_done will * trigger a giveback below. Otherwise, the submitted * segments will be completed in the DTI interrupt. */ seg->status = WA_SEG_ABORTED; seg->result = -ENOENT; list_del(&seg->list_node); xfer->segs_done++; break; case WA_SEG_DONE: case WA_SEG_ERROR: case WA_SEG_ABORTED: break; /* * The buf_in data for a segment in the * WA_SEG_DTI_PENDING state is actively being read. * Let wa_buf_in_cb handle it since it will be called * and will increment xfer->segs_done. Cleaning up * here could cause wa_buf_in_cb to access the xfer * after it has been completed/freed. */ case WA_SEG_DTI_PENDING: break; /* * In the states below, the HWA device already knows * about the transfer. If an abort request was sent, * allow the HWA to process it and wait for the * results. Otherwise, the DTI state and seg completed * counts can get out of sync. */ case WA_SEG_SUBMITTED: case WA_SEG_PENDING: /* * Check if the abort was successfully sent. This could * be false if the HWA has been removed but we haven't * gotten the disconnect notification yet. */ if (!xfer_abort_pending) { seg->status = WA_SEG_ABORTED; rpipe_ready = rpipe_avail_inc(rpipe); xfer->segs_done++; } break; } } spin_unlock(&rpipe->seg_lock); xfer->result = urb->status; /* -ENOENT or -ECONNRESET */ done = __wa_xfer_is_done(xfer); spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); wa_xfer_put(xfer); return result; out_unlock: spin_unlock_irqrestore(&xfer->lock, flags); wa_xfer_put(xfer); return result; dequeue_delayed: list_del_init(&xfer->list_node); spin_unlock_irqrestore(&wa->xfer_list_lock, flags2); xfer->result = urb->status; spin_unlock_irqrestore(&xfer->lock, flags); wa_xfer_giveback(xfer); wa_xfer_put(xfer); usb_put_urb(urb); /* we got a ref in enqueue() */ return 0; } EXPORT_SYMBOL_GPL(wa_urb_dequeue); /* * Translation from WA status codes (WUSB1.0 Table 8.15) to errno * codes * * Positive errno values are internal inconsistencies and should be * flagged louder. Negative are to be passed up to the user in the * normal way. * * @status: USB WA status code -- high two bits are stripped. */ static int wa_xfer_status_to_errno(u8 status) { int errno; u8 real_status = status; static int xlat[] = { [WA_XFER_STATUS_SUCCESS] = 0, [WA_XFER_STATUS_HALTED] = -EPIPE, [WA_XFER_STATUS_DATA_BUFFER_ERROR] = -ENOBUFS, [WA_XFER_STATUS_BABBLE] = -EOVERFLOW, [WA_XFER_RESERVED] = EINVAL, [WA_XFER_STATUS_NOT_FOUND] = 0, [WA_XFER_STATUS_INSUFFICIENT_RESOURCE] = -ENOMEM, [WA_XFER_STATUS_TRANSACTION_ERROR] = -EILSEQ, [WA_XFER_STATUS_ABORTED] = -ENOENT, [WA_XFER_STATUS_RPIPE_NOT_READY] = EINVAL, [WA_XFER_INVALID_FORMAT] = EINVAL, [WA_XFER_UNEXPECTED_SEGMENT_NUMBER] = EINVAL, [WA_XFER_STATUS_RPIPE_TYPE_MISMATCH] = EINVAL, }; status &= 0x3f; if (status == 0) return 0; if (status >= ARRAY_SIZE(xlat)) { printk_ratelimited(KERN_ERR "%s(): BUG? " "Unknown WA transfer status 0x%02x\n", __func__, real_status); return -EINVAL; } errno = xlat[status]; if (unlikely(errno > 0)) { printk_ratelimited(KERN_ERR "%s(): BUG? " "Inconsistent WA status: 0x%02x\n", __func__, real_status); errno = -errno; } return errno; } /* * If a last segment flag and/or a transfer result error is encountered, * no other segment transfer results will be returned from the device. * Mark the remaining submitted or pending xfers as completed so that * the xfer will complete cleanly. * * xfer->lock must be held * */ static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, int starting_index, enum wa_seg_status status) { int index; struct wa_rpipe *rpipe = xfer->ep->hcpriv; for (index = starting_index; index < xfer->segs_submitted; index++) { struct wa_seg *current_seg = xfer->seg[index]; BUG_ON(current_seg == NULL); switch (current_seg->status) { case WA_SEG_SUBMITTED: case WA_SEG_PENDING: case WA_SEG_DTI_PENDING: rpipe_avail_inc(rpipe); /* * do not increment RPIPE avail for the WA_SEG_DELAYED case * since it has not been submitted to the RPIPE. */ case WA_SEG_DELAYED: xfer->segs_done++; current_seg->status = status; break; case WA_SEG_ABORTED: break; default: WARN(1, "%s: xfer 0x%08X#%d. bad seg status = %d\n", __func__, wa_xfer_id(xfer), index, current_seg->status); break; } } } /* Populate the given urb based on the current isoc transfer state. */ static int __wa_populate_buf_in_urb_isoc(struct wahc *wa, struct urb *buf_in_urb, struct wa_xfer *xfer, struct wa_seg *seg) { int urb_start_frame = seg->isoc_frame_index + seg->isoc_frame_offset; int seg_index, total_len = 0, urb_frame_index = urb_start_frame; struct usb_iso_packet_descriptor *iso_frame_desc = xfer->urb->iso_frame_desc; const int dti_packet_size = usb_endpoint_maxp(wa->dti_epd); int next_frame_contiguous; struct usb_iso_packet_descriptor *iso_frame; BUG_ON(buf_in_urb->status == -EINPROGRESS); /* * If the current frame actual_length is contiguous with the next frame * and actual_length is a multiple of the DTI endpoint max packet size, * combine the current frame with the next frame in a single URB. This * reduces the number of URBs that must be submitted in that case. */ seg_index = seg->isoc_frame_index; do { next_frame_contiguous = 0; iso_frame = &iso_frame_desc[urb_frame_index]; total_len += iso_frame->actual_length; ++urb_frame_index; ++seg_index; if (seg_index < seg->isoc_frame_count) { struct usb_iso_packet_descriptor *next_iso_frame; next_iso_frame = &iso_frame_desc[urb_frame_index]; if ((iso_frame->offset + iso_frame->actual_length) == next_iso_frame->offset) next_frame_contiguous = 1; } } while (next_frame_contiguous && ((iso_frame->actual_length % dti_packet_size) == 0)); /* this should always be 0 before a resubmit. */ buf_in_urb->num_mapped_sgs = 0; buf_in_urb->transfer_dma = xfer->urb->transfer_dma + iso_frame_desc[urb_start_frame].offset; buf_in_urb->transfer_buffer_length = total_len; buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; buf_in_urb->transfer_buffer = NULL; buf_in_urb->sg = NULL; buf_in_urb->num_sgs = 0; buf_in_urb->context = seg; /* return the number of frames included in this URB. */ return seg_index - seg->isoc_frame_index; } /* Populate the given urb based on the current transfer state. */ static int wa_populate_buf_in_urb(struct urb *buf_in_urb, struct wa_xfer *xfer, unsigned int seg_idx, unsigned int bytes_transferred) { int result = 0; struct wa_seg *seg = xfer->seg[seg_idx]; BUG_ON(buf_in_urb->status == -EINPROGRESS); /* this should always be 0 before a resubmit. */ buf_in_urb->num_mapped_sgs = 0; if (xfer->is_dma) { buf_in_urb->transfer_dma = xfer->urb->transfer_dma + (seg_idx * xfer->seg_size); buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; buf_in_urb->transfer_buffer = NULL; buf_in_urb->sg = NULL; buf_in_urb->num_sgs = 0; } else { /* do buffer or SG processing. */ buf_in_urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP; if (xfer->urb->transfer_buffer) { buf_in_urb->transfer_buffer = xfer->urb->transfer_buffer + (seg_idx * xfer->seg_size); buf_in_urb->sg = NULL; buf_in_urb->num_sgs = 0; } else { /* allocate an SG list to store seg_size bytes and copy the subset of the xfer->urb->sg that matches the buffer subset we are about to read. */ buf_in_urb->sg = wa_xfer_create_subset_sg( xfer->urb->sg, seg_idx * xfer->seg_size, bytes_transferred, &(buf_in_urb->num_sgs)); if (!(buf_in_urb->sg)) { buf_in_urb->num_sgs = 0; result = -ENOMEM; } buf_in_urb->transfer_buffer = NULL; } } buf_in_urb->transfer_buffer_length = bytes_transferred; buf_in_urb->context = seg; return result; } /* * Process a xfer result completion message * * inbound transfers: need to schedule a buf_in_urb read * * FIXME: this function needs to be broken up in parts */ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer, struct wa_xfer_result *xfer_result) { int result; struct device *dev = &wa->usb_iface->dev; unsigned long flags; unsigned int seg_idx; struct wa_seg *seg; struct wa_rpipe *rpipe; unsigned done = 0; u8 usb_status; unsigned rpipe_ready = 0; unsigned bytes_transferred = le32_to_cpu(xfer_result->dwTransferLength); struct urb *buf_in_urb = &(wa->buf_in_urbs[0]); spin_lock_irqsave(&xfer->lock, flags); seg_idx = xfer_result->bTransferSegment & 0x7f; if (unlikely(seg_idx >= xfer->segs)) goto error_bad_seg; seg = xfer->seg[seg_idx]; rpipe = xfer->ep->hcpriv; usb_status = xfer_result->bTransferStatus; dev_dbg(dev, "xfer %p ID 0x%08X#%u: bTransferStatus 0x%02x (seg status %u)\n", xfer, wa_xfer_id(xfer), seg_idx, usb_status, seg->status); if (seg->status == WA_SEG_ABORTED || seg->status == WA_SEG_ERROR) /* already handled */ goto segment_aborted; if (seg->status == WA_SEG_SUBMITTED) /* ops, got here */ seg->status = WA_SEG_PENDING; /* before wa_seg{_dto}_cb() */ if (seg->status != WA_SEG_PENDING) { if (printk_ratelimit()) dev_err(dev, "xfer %p#%u: Bad segment state %u\n", xfer, seg_idx, seg->status); seg->status = WA_SEG_PENDING; /* workaround/"fix" it */ } if (usb_status & 0x80) { seg->result = wa_xfer_status_to_errno(usb_status); dev_err(dev, "DTI: xfer %p 0x%08X:#%u failed (0x%02x)\n", xfer, xfer->id, seg->index, usb_status); seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ? WA_SEG_ABORTED : WA_SEG_ERROR; goto error_complete; } /* FIXME: we ignore warnings, tally them for stats */ if (usb_status & 0x40) /* Warning?... */ usb_status = 0; /* ... pass */ /* * If the last segment bit is set, complete the remaining segments. * When the current segment is completed, either in wa_buf_in_cb for * transfers with data or below for no data, the xfer will complete. */ if (xfer_result->bTransferSegment & 0x80) wa_complete_remaining_xfer_segs(xfer, seg->index + 1, WA_SEG_DONE); if (usb_pipeisoc(xfer->urb->pipe) && (le32_to_cpu(xfer_result->dwNumOfPackets) > 0)) { /* set up WA state to read the isoc packet status next. */ wa->dti_isoc_xfer_in_progress = wa_xfer_id(xfer); wa->dti_isoc_xfer_seg = seg_idx; wa->dti_state = WA_DTI_ISOC_PACKET_STATUS_PENDING; } else if (xfer->is_inbound && !usb_pipeisoc(xfer->urb->pipe) && (bytes_transferred > 0)) { /* IN data phase: read to buffer */ seg->status = WA_SEG_DTI_PENDING; result = wa_populate_buf_in_urb(buf_in_urb, xfer, seg_idx, bytes_transferred); if (result < 0) goto error_buf_in_populate; ++(wa->active_buf_in_urbs); result = usb_submit_urb(buf_in_urb, GFP_ATOMIC); if (result < 0) { --(wa->active_buf_in_urbs); goto error_submit_buf_in; } } else { /* OUT data phase or no data, complete it -- */ seg->result = bytes_transferred; rpipe_ready = rpipe_avail_inc(rpipe); done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE); } spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); return; error_submit_buf_in: if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { dev_err(dev, "DTI: URB max acceptable errors " "exceeded, resetting device\n"); wa_reset_all(wa); } if (printk_ratelimit()) dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n", xfer, seg_idx, result); seg->result = result; kfree(buf_in_urb->sg); buf_in_urb->sg = NULL; error_buf_in_populate: __wa_xfer_abort(xfer); seg->status = WA_SEG_ERROR; error_complete: xfer->segs_done++; rpipe_ready = rpipe_avail_inc(rpipe); wa_complete_remaining_xfer_segs(xfer, seg->index + 1, seg->status); done = __wa_xfer_is_done(xfer); /* * queue work item to clear STALL for control endpoints. * Otherwise, let endpoint_reset take care of it. */ if (((usb_status & 0x3f) == WA_XFER_STATUS_HALTED) && usb_endpoint_xfer_control(&xfer->ep->desc) && done) { dev_info(dev, "Control EP stall. Queue delayed work.\n"); spin_lock(&wa->xfer_list_lock); /* move xfer from xfer_list to xfer_errored_list. */ list_move_tail(&xfer->list_node, &wa->xfer_errored_list); spin_unlock(&wa->xfer_list_lock); spin_unlock_irqrestore(&xfer->lock, flags); queue_work(wusbd, &wa->xfer_error_work); } else { spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); } return; error_bad_seg: spin_unlock_irqrestore(&xfer->lock, flags); wa_urb_dequeue(wa, xfer->urb, -ENOENT); if (printk_ratelimit()) dev_err(dev, "xfer %p#%u: bad segment\n", xfer, seg_idx); if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { dev_err(dev, "DTI: URB max acceptable errors " "exceeded, resetting device\n"); wa_reset_all(wa); } return; segment_aborted: /* nothing to do, as the aborter did the completion */ spin_unlock_irqrestore(&xfer->lock, flags); } /* * Process a isochronous packet status message * * inbound transfers: need to schedule a buf_in_urb read */ static int wa_process_iso_packet_status(struct wahc *wa, struct urb *urb) { struct device *dev = &wa->usb_iface->dev; struct wa_xfer_packet_status_hwaiso *packet_status; struct wa_xfer_packet_status_len_hwaiso *status_array; struct wa_xfer *xfer; unsigned long flags; struct wa_seg *seg; struct wa_rpipe *rpipe; unsigned done = 0, dti_busy = 0, data_frame_count = 0, seg_index; unsigned first_frame_index = 0, rpipe_ready = 0; int expected_size; /* We have a xfer result buffer; check it */ dev_dbg(dev, "DTI: isoc packet status %d bytes at %p\n", urb->actual_length, urb->transfer_buffer); packet_status = (struct wa_xfer_packet_status_hwaiso *)(wa->dti_buf); if (packet_status->bPacketType != WA_XFER_ISO_PACKET_STATUS) { dev_err(dev, "DTI Error: isoc packet status--bad type 0x%02x\n", packet_status->bPacketType); goto error_parse_buffer; } xfer = wa_xfer_get_by_id(wa, wa->dti_isoc_xfer_in_progress); if (xfer == NULL) { dev_err(dev, "DTI Error: isoc packet status--unknown xfer 0x%08x\n", wa->dti_isoc_xfer_in_progress); goto error_parse_buffer; } spin_lock_irqsave(&xfer->lock, flags); if (unlikely(wa->dti_isoc_xfer_seg >= xfer->segs)) goto error_bad_seg; seg = xfer->seg[wa->dti_isoc_xfer_seg]; rpipe = xfer->ep->hcpriv; expected_size = sizeof(*packet_status) + (sizeof(packet_status->PacketStatus[0]) * seg->isoc_frame_count); if (urb->actual_length != expected_size) { dev_err(dev, "DTI Error: isoc packet status--bad urb length (%d bytes vs %d needed)\n", urb->actual_length, expected_size); goto error_bad_seg; } if (le16_to_cpu(packet_status->wLength) != expected_size) { dev_err(dev, "DTI Error: isoc packet status--bad length %u\n", le16_to_cpu(packet_status->wLength)); goto error_bad_seg; } /* write isoc packet status and lengths back to the xfer urb. */ status_array = packet_status->PacketStatus; xfer->urb->start_frame = wa->wusb->usb_hcd.driver->get_frame_number(&wa->wusb->usb_hcd); for (seg_index = 0; seg_index < seg->isoc_frame_count; ++seg_index) { struct usb_iso_packet_descriptor *iso_frame_desc = xfer->urb->iso_frame_desc; const int xfer_frame_index = seg->isoc_frame_offset + seg_index; iso_frame_desc[xfer_frame_index].status = wa_xfer_status_to_errno( le16_to_cpu(status_array[seg_index].PacketStatus)); iso_frame_desc[xfer_frame_index].actual_length = le16_to_cpu(status_array[seg_index].PacketLength); /* track the number of frames successfully transferred. */ if (iso_frame_desc[xfer_frame_index].actual_length > 0) { /* save the starting frame index for buf_in_urb. */ if (!data_frame_count) first_frame_index = seg_index; ++data_frame_count; } } if (xfer->is_inbound && data_frame_count) { int result, total_frames_read = 0, urb_index = 0; struct urb *buf_in_urb; /* IN data phase: read to buffer */ seg->status = WA_SEG_DTI_PENDING; /* start with the first frame with data. */ seg->isoc_frame_index = first_frame_index; /* submit up to WA_MAX_BUF_IN_URBS read URBs. */ do { int urb_frame_index, urb_frame_count; struct usb_iso_packet_descriptor *iso_frame_desc; buf_in_urb = &(wa->buf_in_urbs[urb_index]); urb_frame_count = __wa_populate_buf_in_urb_isoc(wa, buf_in_urb, xfer, seg); /* advance frame index to start of next read URB. */ seg->isoc_frame_index += urb_frame_count; total_frames_read += urb_frame_count; ++(wa->active_buf_in_urbs); result = usb_submit_urb(buf_in_urb, GFP_ATOMIC); /* skip 0-byte frames. */ urb_frame_index = seg->isoc_frame_offset + seg->isoc_frame_index; iso_frame_desc = &(xfer->urb->iso_frame_desc[urb_frame_index]); while ((seg->isoc_frame_index < seg->isoc_frame_count) && (iso_frame_desc->actual_length == 0)) { ++(seg->isoc_frame_index); ++iso_frame_desc; } ++urb_index; } while ((result == 0) && (urb_index < WA_MAX_BUF_IN_URBS) && (seg->isoc_frame_index < seg->isoc_frame_count)); if (result < 0) { --(wa->active_buf_in_urbs); dev_err(dev, "DTI Error: Could not submit buf in URB (%d)", result); wa_reset_all(wa); } else if (data_frame_count > total_frames_read) /* If we need to read more frames, set DTI busy. */ dti_busy = 1; } else { /* OUT transfer or no more IN data, complete it -- */ rpipe_ready = rpipe_avail_inc(rpipe); done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE); } spin_unlock_irqrestore(&xfer->lock, flags); if (dti_busy) wa->dti_state = WA_DTI_BUF_IN_DATA_PENDING; else wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); wa_xfer_put(xfer); return dti_busy; error_bad_seg: spin_unlock_irqrestore(&xfer->lock, flags); wa_xfer_put(xfer); error_parse_buffer: return dti_busy; } /* * Callback for the IN data phase * * If successful transition state; otherwise, take a note of the * error, mark this segment done and try completion. * * Note we don't access until we are sure that the transfer hasn't * been cancelled (ECONNRESET, ENOENT), which could mean that * seg->xfer could be already gone. */ static void wa_buf_in_cb(struct urb *urb) { struct wa_seg *seg = urb->context; struct wa_xfer *xfer = seg->xfer; struct wahc *wa; struct device *dev; struct wa_rpipe *rpipe; unsigned rpipe_ready = 0, isoc_data_frame_count = 0; unsigned long flags; int resubmit_dti = 0, active_buf_in_urbs; u8 done = 0; /* free the sg if it was used. */ kfree(urb->sg); urb->sg = NULL; spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; --(wa->active_buf_in_urbs); active_buf_in_urbs = wa->active_buf_in_urbs; rpipe = xfer->ep->hcpriv; if (usb_pipeisoc(xfer->urb->pipe)) { struct usb_iso_packet_descriptor *iso_frame_desc = xfer->urb->iso_frame_desc; int seg_index; /* * Find the next isoc frame with data and count how many * frames with data remain. */ seg_index = seg->isoc_frame_index; while (seg_index < seg->isoc_frame_count) { const int urb_frame_index = seg->isoc_frame_offset + seg_index; if (iso_frame_desc[urb_frame_index].actual_length > 0) { /* save the index of the next frame with data */ if (!isoc_data_frame_count) seg->isoc_frame_index = seg_index; ++isoc_data_frame_count; } ++seg_index; } } spin_unlock_irqrestore(&xfer->lock, flags); switch (urb->status) { case 0: spin_lock_irqsave(&xfer->lock, flags); seg->result += urb->actual_length; if (isoc_data_frame_count > 0) { int result, urb_frame_count; /* submit a read URB for the next frame with data. */ urb_frame_count = __wa_populate_buf_in_urb_isoc(wa, urb, xfer, seg); /* advance index to start of next read URB. */ seg->isoc_frame_index += urb_frame_count; ++(wa->active_buf_in_urbs); result = usb_submit_urb(urb, GFP_ATOMIC); if (result < 0) { --(wa->active_buf_in_urbs); dev_err(dev, "DTI Error: Could not submit buf in URB (%d)", result); wa_reset_all(wa); } /* * If we are in this callback and * isoc_data_frame_count > 0, it means that the dti_urb * submission was delayed in wa_dti_cb. Once * we submit the last buf_in_urb, we can submit the * delayed dti_urb. */ resubmit_dti = (isoc_data_frame_count == urb_frame_count); } else if (active_buf_in_urbs == 0) { dev_dbg(dev, "xfer %p 0x%08X#%u: data in done (%zu bytes)\n", xfer, wa_xfer_id(xfer), seg->index, seg->result); rpipe_ready = rpipe_avail_inc(rpipe); done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE); } spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); break; case -ECONNRESET: /* URB unlinked; no need to do anything */ case -ENOENT: /* as it was done by the who unlinked us */ break; default: /* Other errors ... */ /* * Error on data buf read. Only resubmit DTI if it hasn't * already been done by previously hitting this error or by a * successful completion of the previous buf_in_urb. */ resubmit_dti = wa->dti_state != WA_DTI_TRANSFER_RESULT_PENDING; spin_lock_irqsave(&xfer->lock, flags); if (printk_ratelimit()) dev_err(dev, "xfer %p 0x%08X#%u: data in error %d\n", xfer, wa_xfer_id(xfer), seg->index, urb->status); if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)){ dev_err(dev, "DTO: URB max acceptable errors " "exceeded, resetting device\n"); wa_reset_all(wa); } seg->result = urb->status; rpipe_ready = rpipe_avail_inc(rpipe); if (active_buf_in_urbs == 0) done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR); else __wa_xfer_abort(xfer); spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); } if (resubmit_dti) { int result; wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC); if (result < 0) { dev_err(dev, "DTI Error: Could not submit DTI URB (%d)\n", result); wa_reset_all(wa); } } } /* * Handle an incoming transfer result buffer * * Given a transfer result buffer, it completes the transfer (possibly * scheduling and buffer in read) and then resubmits the DTI URB for a * new transfer result read. * * * The xfer_result DTI URB state machine * * States: OFF | RXR (Read-Xfer-Result) | RBI (Read-Buffer-In) * * We start in OFF mode, the first xfer_result notification [through * wa_handle_notif_xfer()] moves us to RXR by posting the DTI-URB to * read. * * We receive a buffer -- if it is not a xfer_result, we complain and * repost the DTI-URB. If it is a xfer_result then do the xfer seg * request accounting. If it is an IN segment, we move to RBI and post * a BUF-IN-URB to the right buffer. The BUF-IN-URB callback will * repost the DTI-URB and move to RXR state. if there was no IN * segment, it will repost the DTI-URB. * * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many * errors) in the URBs. */ static void wa_dti_cb(struct urb *urb) { int result, dti_busy = 0; struct wahc *wa = urb->context; struct device *dev = &wa->usb_iface->dev; u32 xfer_id; u8 usb_status; BUG_ON(wa->dti_urb != urb); switch (wa->dti_urb->status) { case 0: if (wa->dti_state == WA_DTI_TRANSFER_RESULT_PENDING) { struct wa_xfer_result *xfer_result; struct wa_xfer *xfer; /* We have a xfer result buffer; check it */ dev_dbg(dev, "DTI: xfer result %d bytes at %p\n", urb->actual_length, urb->transfer_buffer); if (urb->actual_length != sizeof(*xfer_result)) { dev_err(dev, "DTI Error: xfer result--bad size xfer result (%d bytes vs %zu needed)\n", urb->actual_length, sizeof(*xfer_result)); break; } xfer_result = (struct wa_xfer_result *)(wa->dti_buf); if (xfer_result->hdr.bLength != sizeof(*xfer_result)) { dev_err(dev, "DTI Error: xfer result--bad header length %u\n", xfer_result->hdr.bLength); break; } if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) { dev_err(dev, "DTI Error: xfer result--bad header type 0x%02x\n", xfer_result->hdr.bNotifyType); break; } xfer_id = le32_to_cpu(xfer_result->dwTransferID); usb_status = xfer_result->bTransferStatus & 0x3f; if (usb_status == WA_XFER_STATUS_NOT_FOUND) { /* taken care of already */ dev_dbg(dev, "%s: xfer 0x%08X#%u not found.\n", __func__, xfer_id, xfer_result->bTransferSegment & 0x7f); break; } xfer = wa_xfer_get_by_id(wa, xfer_id); if (xfer == NULL) { /* FIXME: transaction not found. */ dev_err(dev, "DTI Error: xfer result--unknown xfer 0x%08x (status 0x%02x)\n", xfer_id, usb_status); break; } wa_xfer_result_chew(wa, xfer, xfer_result); wa_xfer_put(xfer); } else if (wa->dti_state == WA_DTI_ISOC_PACKET_STATUS_PENDING) { dti_busy = wa_process_iso_packet_status(wa, urb); } else { dev_err(dev, "DTI Error: unexpected EP state = %d\n", wa->dti_state); } break; case -ENOENT: /* (we killed the URB)...so, no broadcast */ case -ESHUTDOWN: /* going away! */ dev_dbg(dev, "DTI: going down! %d\n", urb->status); goto out; default: /* Unknown error */ if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { dev_err(dev, "DTI: URB max acceptable errors " "exceeded, resetting device\n"); wa_reset_all(wa); goto out; } if (printk_ratelimit()) dev_err(dev, "DTI: URB error %d\n", urb->status); break; } /* Resubmit the DTI URB if we are not busy processing isoc in frames. */ if (!dti_busy) { result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC); if (result < 0) { dev_err(dev, "DTI Error: Could not submit DTI URB (%d)\n", result); wa_reset_all(wa); } } out: return; } /* * Initialize the DTI URB for reading transfer result notifications and also * the buffer-in URB, for reading buffers. Then we just submit the DTI URB. */ int wa_dti_start(struct wahc *wa) { const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd; struct device *dev = &wa->usb_iface->dev; int result = -ENOMEM, index; if (wa->dti_urb != NULL) /* DTI URB already started */ goto out; wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL); if (wa->dti_urb == NULL) goto error_dti_urb_alloc; usb_fill_bulk_urb( wa->dti_urb, wa->usb_dev, usb_rcvbulkpipe(wa->usb_dev, 0x80 | dti_epd->bEndpointAddress), wa->dti_buf, wa->dti_buf_size, wa_dti_cb, wa); /* init the buf in URBs */ for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index) { usb_fill_bulk_urb( &(wa->buf_in_urbs[index]), wa->usb_dev, usb_rcvbulkpipe(wa->usb_dev, 0x80 | dti_epd->bEndpointAddress), NULL, 0, wa_buf_in_cb, wa); } result = usb_submit_urb(wa->dti_urb, GFP_KERNEL); if (result < 0) { dev_err(dev, "DTI Error: Could not submit DTI URB (%d) resetting\n", result); goto error_dti_urb_submit; } out: return 0; error_dti_urb_submit: usb_put_urb(wa->dti_urb); wa->dti_urb = NULL; error_dti_urb_alloc: return result; } EXPORT_SYMBOL_GPL(wa_dti_start); /* * Transfer complete notification * * Called from the notif.c code. We get a notification on EP2 saying * that some endpoint has some transfer result data available. We are * about to read it. * * To speed up things, we always have a URB reading the DTI URB; we * don't really set it up and start it until the first xfer complete * notification arrives, which is what we do here. * * Follow up in wa_dti_cb(), as that's where the whole state * machine starts. * * @wa shall be referenced */ void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr) { struct device *dev = &wa->usb_iface->dev; struct wa_notif_xfer *notif_xfer; const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd; notif_xfer = container_of(notif_hdr, struct wa_notif_xfer, hdr); BUG_ON(notif_hdr->bNotifyType != WA_NOTIF_TRANSFER); if ((0x80 | notif_xfer->bEndpoint) != dti_epd->bEndpointAddress) { /* FIXME: hardcoded limitation, adapt */ dev_err(dev, "BUG: DTI ep is %u, not %u (hack me)\n", notif_xfer->bEndpoint, dti_epd->bEndpointAddress); goto error; } /* attempt to start the DTI ep processing. */ if (wa_dti_start(wa) < 0) goto error; return; error: wa_reset_all(wa); }