/* * Helper macros to support writing architecture specific * linker scripts. * * A minimal linker scripts has following content: * [This is a sample, architectures may have special requiriements] * * OUTPUT_FORMAT(...) * OUTPUT_ARCH(...) * ENTRY(...) * SECTIONS * { * . = START; * __init_begin = .; * HEAD_TEXT_SECTION * INIT_TEXT_SECTION(PAGE_SIZE) * INIT_DATA_SECTION(...) * PERCPU_SECTION(CACHELINE_SIZE) * __init_end = .; * * _stext = .; * TEXT_SECTION = 0 * _etext = .; * * _sdata = .; * RO_DATA_SECTION(PAGE_SIZE) * RW_DATA_SECTION(...) * _edata = .; * * EXCEPTION_TABLE(...) * NOTES * * BSS_SECTION(0, 0, 0) * _end = .; * * STABS_DEBUG * DWARF_DEBUG * * DISCARDS // must be the last * } * * [__init_begin, __init_end] is the init section that may be freed after init * // __init_begin and __init_end should be page aligned, so that we can * // free the whole .init memory * [_stext, _etext] is the text section * [_sdata, _edata] is the data section * * Some of the included output section have their own set of constants. * Examples are: [__initramfs_start, __initramfs_end] for initramfs and * [__nosave_begin, __nosave_end] for the nosave data */ #ifndef LOAD_OFFSET #define LOAD_OFFSET 0 #endif #include /* Align . to a 8 byte boundary equals to maximum function alignment. */ #define ALIGN_FUNCTION() . = ALIGN(8) /* * LD_DEAD_CODE_DATA_ELIMINATION option enables -fdata-sections, which * generates .data.identifier sections, which need to be pulled in with * .data. We don't want to pull in .data..other sections, which Linux * has defined. Same for text and bss. */ #ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION #define TEXT_MAIN .text .text.[0-9a-zA-Z_]* #define TEXT_CFI_MAIN .text.cfi .text.[0-9a-zA-Z_]*.cfi #define DATA_MAIN .data .data.[0-9a-zA-Z_]* #define BSS_MAIN .bss .bss.[0-9a-zA-Z_]* #else #define TEXT_MAIN .text #define TEXT_CFI_MAIN .text.cfi #define DATA_MAIN .data #define BSS_MAIN .bss #endif /* * Align to a 32 byte boundary equal to the * alignment gcc 4.5 uses for a struct */ #define STRUCT_ALIGNMENT 32 #define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT) /* The actual configuration determine if the init/exit sections * are handled as text/data or they can be discarded (which * often happens at runtime) */ #ifdef CONFIG_HOTPLUG_CPU #define CPU_KEEP(sec) *(.cpu##sec) #define CPU_DISCARD(sec) #else #define CPU_KEEP(sec) #define CPU_DISCARD(sec) *(.cpu##sec) #endif #if defined(CONFIG_MEMORY_HOTPLUG) #define MEM_KEEP(sec) *(.mem##sec) #define MEM_DISCARD(sec) #else #define MEM_KEEP(sec) #define MEM_DISCARD(sec) *(.mem##sec) #endif #ifdef CONFIG_FTRACE_MCOUNT_RECORD #define MCOUNT_REC() . = ALIGN(8); \ VMLINUX_SYMBOL(__start_mcount_loc) = .; \ KEEP(*(__mcount_loc)) \ VMLINUX_SYMBOL(__stop_mcount_loc) = .; #else #define MCOUNT_REC() #endif #ifdef CONFIG_TRACE_BRANCH_PROFILING #define LIKELY_PROFILE() VMLINUX_SYMBOL(__start_annotated_branch_profile) = .; \ *(_ftrace_annotated_branch) \ VMLINUX_SYMBOL(__stop_annotated_branch_profile) = .; #else #define LIKELY_PROFILE() #endif #ifdef CONFIG_PROFILE_ALL_BRANCHES #define BRANCH_PROFILE() VMLINUX_SYMBOL(__start_branch_profile) = .; \ *(_ftrace_branch) \ VMLINUX_SYMBOL(__stop_branch_profile) = .; #else #define BRANCH_PROFILE() #endif #ifdef CONFIG_KPROBES #define KPROBE_BLACKLIST() . = ALIGN(8); \ VMLINUX_SYMBOL(__start_kprobe_blacklist) = .; \ *(_kprobe_blacklist) \ VMLINUX_SYMBOL(__stop_kprobe_blacklist) = .; #else #define KPROBE_BLACKLIST() #endif #ifdef CONFIG_EVENT_TRACING #define FTRACE_EVENTS() . = ALIGN(8); \ VMLINUX_SYMBOL(__start_ftrace_events) = .; \ KEEP(*(_ftrace_events)) \ VMLINUX_SYMBOL(__stop_ftrace_events) = .; \ VMLINUX_SYMBOL(__start_ftrace_enum_maps) = .; \ KEEP(*(_ftrace_enum_map)) \ VMLINUX_SYMBOL(__stop_ftrace_enum_maps) = .; #else #define FTRACE_EVENTS() #endif #ifdef CONFIG_TRACING #define TRACE_PRINTKS() VMLINUX_SYMBOL(__start___trace_bprintk_fmt) = .; \ *(__trace_printk_fmt) /* Trace_printk fmt' pointer */ \ VMLINUX_SYMBOL(__stop___trace_bprintk_fmt) = .; #define TRACEPOINT_STR() VMLINUX_SYMBOL(__start___tracepoint_str) = .; \ *(__tracepoint_str) /* Trace_printk fmt' pointer */ \ VMLINUX_SYMBOL(__stop___tracepoint_str) = .; #else #define TRACE_PRINTKS() #define TRACEPOINT_STR() #endif #ifdef CONFIG_FTRACE_SYSCALLS #define TRACE_SYSCALLS() . = ALIGN(8); \ VMLINUX_SYMBOL(__start_syscalls_metadata) = .; \ *(__syscalls_metadata) \ VMLINUX_SYMBOL(__stop_syscalls_metadata) = .; #else #define TRACE_SYSCALLS() #endif #ifdef CONFIG_SERIAL_EARLYCON #define EARLYCON_TABLE() . = ALIGN(8); \ VMLINUX_SYMBOL(__earlycon_table) = .; \ *(__earlycon_table) \ VMLINUX_SYMBOL(__earlycon_table_end) = .; #else #define EARLYCON_TABLE() #endif #define ___OF_TABLE(cfg, name) _OF_TABLE_##cfg(name) #define __OF_TABLE(cfg, name) ___OF_TABLE(cfg, name) #define OF_TABLE(cfg, name) __OF_TABLE(IS_ENABLED(cfg), name) #define _OF_TABLE_0(name) #define _OF_TABLE_1(name) \ . = ALIGN(8); \ VMLINUX_SYMBOL(__##name##_of_table) = .; \ KEEP(*(__##name##_of_table)) \ KEEP(*(__##name##_of_table_end)) #define CLKSRC_OF_TABLES() OF_TABLE(CONFIG_CLKSRC_OF, clksrc) #define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip) #define CLK_OF_TABLES() OF_TABLE(CONFIG_COMMON_CLK, clk) #define IOMMU_OF_TABLES() OF_TABLE(CONFIG_OF_IOMMU, iommu) #define MCERR_OF_TABLES() OF_TABLE(CONFIG_TEGRA_OF_MCERR, mcerr) #define RESERVEDMEM_OF_TABLES() OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem) #define CPU_METHOD_OF_TABLES() OF_TABLE(CONFIG_SMP, cpu_method) #define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method) #ifdef CONFIG_ACPI #define ACPI_PROBE_TABLE(name) \ . = ALIGN(8); \ VMLINUX_SYMBOL(__##name##_acpi_probe_table) = .; \ *(__##name##_acpi_probe_table) \ VMLINUX_SYMBOL(__##name##_acpi_probe_table_end) = .; #else #define ACPI_PROBE_TABLE(name) #endif #define KERNEL_DTB() \ STRUCT_ALIGN(); \ VMLINUX_SYMBOL(__dtb_start) = .; \ *(.dtb.init.rodata) \ VMLINUX_SYMBOL(__dtb_end) = .; /* * .data section */ #define DATA_DATA \ *(DATA_MAIN) \ *(.ref.data) \ *(.data..shared_aligned) /* percpu related */ \ MEM_KEEP(init.data) \ MEM_KEEP(exit.data) \ *(.data.unlikely) \ STRUCT_ALIGN(); \ *(__tracepoints) \ /* implement dynamic printk debug */ \ . = ALIGN(8); \ VMLINUX_SYMBOL(__start___jump_table) = .; \ *(__jump_table) \ VMLINUX_SYMBOL(__stop___jump_table) = .; \ . = ALIGN(8); \ VMLINUX_SYMBOL(__start___verbose) = .; \ *(__verbose) \ VMLINUX_SYMBOL(__stop___verbose) = .; \ LIKELY_PROFILE() \ BRANCH_PROFILE() \ TRACE_PRINTKS() \ TRACEPOINT_STR() /* * Data section helpers */ #define NOSAVE_DATA \ . = ALIGN(PAGE_SIZE); \ VMLINUX_SYMBOL(__nosave_begin) = .; \ *(.data..nosave) \ . = ALIGN(PAGE_SIZE); \ VMLINUX_SYMBOL(__nosave_end) = .; #define PAGE_ALIGNED_DATA(page_align) \ . = ALIGN(page_align); \ *(.data..page_aligned) \ . = ALIGN(page_align); #define READ_MOSTLY_DATA(align) \ . = ALIGN(align); \ *(.data..read_mostly) \ . = ALIGN(align); #define CACHELINE_ALIGNED_DATA(align) \ . = ALIGN(align); \ *(.data..cacheline_aligned) #define INIT_TASK_DATA(align) \ . = ALIGN(align); \ VMLINUX_SYMBOL(__start_init_task) = .; \ *(.data..init_task) \ VMLINUX_SYMBOL(__end_init_task) = .; /* * Allow architectures to handle ro_after_init data on their * own by defining an empty RO_AFTER_INIT_DATA. */ #ifndef RO_AFTER_INIT_DATA #define RO_AFTER_INIT_DATA \ __start_data_ro_after_init = .; \ *(.data..ro_after_init) \ __end_data_ro_after_init = .; #endif /* * Read only Data */ #define RO_DATA_SECTION(align) \ . = ALIGN((align)); \ .rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start_rodata) = .; \ *(.rodata) *(.rodata.*) \ RO_AFTER_INIT_DATA /* Read only after init */ \ *(__vermagic) /* Kernel version magic */ \ . = ALIGN(8); \ VMLINUX_SYMBOL(__start___tracepoints_ptrs) = .; \ *(__tracepoints_ptrs) /* Tracepoints: pointer array */\ VMLINUX_SYMBOL(__stop___tracepoints_ptrs) = .; \ *(__tracepoints_strings)/* Tracepoints: strings */ \ } \ \ .rodata1 : AT(ADDR(.rodata1) - LOAD_OFFSET) { \ *(.rodata1) \ } \ \ BUG_TABLE \ \ /* PCI quirks */ \ .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \ KEEP(*(.pci_fixup_early)) \ VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \ VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \ KEEP(*(.pci_fixup_header)) \ VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \ VMLINUX_SYMBOL(__start_pci_fixups_final) = .; \ KEEP(*(.pci_fixup_final)) \ VMLINUX_SYMBOL(__end_pci_fixups_final) = .; \ VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \ KEEP(*(.pci_fixup_enable)) \ VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \ VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \ KEEP(*(.pci_fixup_resume)) \ VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \ VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \ KEEP(*(.pci_fixup_resume_early)) \ VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \ VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \ KEEP(*(.pci_fixup_suspend)) \ VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \ VMLINUX_SYMBOL(__start_pci_fixups_suspend_late) = .; \ KEEP(*(.pci_fixup_suspend_late)) \ VMLINUX_SYMBOL(__end_pci_fixups_suspend_late) = .; \ } \ \ /* Built-in firmware blobs */ \ .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start_builtin_fw) = .; \ *(.builtin_fw) \ VMLINUX_SYMBOL(__end_builtin_fw) = .; \ } \ \ TRACEDATA \ \ /* Kernel symbol table: Normal symbols */ \ __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___ksymtab) = .; \ KEEP(*(SORT(___ksymtab+*))) \ VMLINUX_SYMBOL(__stop___ksymtab) = .; \ } \ \ /* Kernel symbol table: GPL-only symbols */ \ __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \ KEEP(*(SORT(___ksymtab_gpl+*))) \ VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \ } \ \ /* Kernel symbol table: Normal unused symbols */ \ __ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___ksymtab_unused) = .; \ KEEP(*(SORT(___ksymtab_unused+*))) \ VMLINUX_SYMBOL(__stop___ksymtab_unused) = .; \ } \ \ /* Kernel symbol table: GPL-only unused symbols */ \ __ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .; \ KEEP(*(SORT(___ksymtab_unused_gpl+*))) \ VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .; \ } \ \ /* Kernel symbol table: GPL-future-only symbols */ \ __ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .; \ KEEP(*(SORT(___ksymtab_gpl_future+*))) \ VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .; \ } \ \ /* Kernel symbol table: Normal symbols */ \ __kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___kcrctab) = .; \ KEEP(*(SORT(___kcrctab+*))) \ VMLINUX_SYMBOL(__stop___kcrctab) = .; \ } \ \ /* Kernel symbol table: GPL-only symbols */ \ __kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___kcrctab_gpl) = .; \ KEEP(*(SORT(___kcrctab_gpl+*))) \ VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .; \ } \ \ /* Kernel symbol table: Normal unused symbols */ \ __kcrctab_unused : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___kcrctab_unused) = .; \ KEEP(*(SORT(___kcrctab_unused+*))) \ VMLINUX_SYMBOL(__stop___kcrctab_unused) = .; \ } \ \ /* Kernel symbol table: GPL-only unused symbols */ \ __kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .; \ KEEP(*(SORT(___kcrctab_unused_gpl+*))) \ VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .; \ } \ \ /* Kernel symbol table: GPL-future-only symbols */ \ __kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .; \ KEEP(*(SORT(___kcrctab_gpl_future+*))) \ VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .; \ } \ \ /* Kernel symbol table: strings */ \ __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \ KEEP(*(__ksymtab_strings)) \ } \ \ /* __*init sections */ \ __init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \ *(.ref.rodata) \ MEM_KEEP(init.rodata) \ MEM_KEEP(exit.rodata) \ } \ \ /* Built-in module parameters. */ \ __param : AT(ADDR(__param) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___param) = .; \ KEEP(*(__param)) \ VMLINUX_SYMBOL(__stop___param) = .; \ } \ \ /* Built-in module versions. */ \ __modver : AT(ADDR(__modver) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___modver) = .; \ *(__modver) \ VMLINUX_SYMBOL(__stop___modver) = .; \ . = ALIGN((align)); \ VMLINUX_SYMBOL(__end_rodata) = .; \ } \ . = ALIGN((align)); /* RODATA & RO_DATA provided for backward compatibility. * All archs are supposed to use RO_DATA() */ #define RODATA RO_DATA_SECTION(4096) #define RO_DATA(align) RO_DATA_SECTION(align) #define SECURITY_INIT \ .security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__security_initcall_start) = .; \ KEEP(*(.security_initcall.init)) \ VMLINUX_SYMBOL(__security_initcall_end) = .; \ } /* * .text section. Map to function alignment to avoid address changes * during second ld run in second ld pass when generating System.map * * TEXT_MAIN here will match .text.fixup and .text.unlikely if dead * code elimination is enabled, so these sections should be converted * to use ".." first. */ #define TEXT_TEXT \ ALIGN_FUNCTION(); \ *(.text.hot .text.hot.*) \ *(TEXT_MAIN .text.fixup) \ *(.text.unlikely .text.unlikely.*) \ *(.text.unknown .text.unknown.*) \ *(.text..ftrace) \ *(TEXT_CFI_MAIN) \ *(.ref.text) \ MEM_KEEP(init.text) \ MEM_KEEP(exit.text) \ /* sched.text is aling to function alignment to secure we have same * address even at second ld pass when generating System.map */ #define SCHED_TEXT \ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__sched_text_start) = .; \ *(.sched.text) \ VMLINUX_SYMBOL(__sched_text_end) = .; /* spinlock.text is aling to function alignment to secure we have same * address even at second ld pass when generating System.map */ #define LOCK_TEXT \ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__lock_text_start) = .; \ *(.spinlock.text) \ VMLINUX_SYMBOL(__lock_text_end) = .; #define CPUIDLE_TEXT \ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__cpuidle_text_start) = .; \ *(.cpuidle.text) \ VMLINUX_SYMBOL(__cpuidle_text_end) = .; #define KPROBES_TEXT \ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__kprobes_text_start) = .; \ *(.kprobes.text) \ VMLINUX_SYMBOL(__kprobes_text_end) = .; #define ENTRY_TEXT \ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__entry_text_start) = .; \ *(.entry.text) \ VMLINUX_SYMBOL(__entry_text_end) = .; #define IRQENTRY_TEXT \ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__irqentry_text_start) = .; \ *(.irqentry.text) \ VMLINUX_SYMBOL(__irqentry_text_end) = .; #define SOFTIRQENTRY_TEXT \ ALIGN_FUNCTION(); \ VMLINUX_SYMBOL(__softirqentry_text_start) = .; \ *(.softirqentry.text) \ VMLINUX_SYMBOL(__softirqentry_text_end) = .; /* Section used for early init (in .S files) */ #define HEAD_TEXT KEEP(*(.head.text)) #define HEAD_TEXT_SECTION \ .head.text : AT(ADDR(.head.text) - LOAD_OFFSET) { \ HEAD_TEXT \ } /* * Exception table */ #define EXCEPTION_TABLE(align) \ . = ALIGN(align); \ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___ex_table) = .; \ KEEP(*(__ex_table)) \ VMLINUX_SYMBOL(__stop___ex_table) = .; \ } /* * Init task */ #define INIT_TASK_DATA_SECTION(align) \ . = ALIGN(align); \ .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { \ INIT_TASK_DATA(align) \ } #ifdef CONFIG_CONSTRUCTORS #define KERNEL_CTORS() . = ALIGN(8); \ VMLINUX_SYMBOL(__ctors_start) = .; \ *(.ctors) \ *(SORT(.init_array.*)) \ *(.init_array) \ VMLINUX_SYMBOL(__ctors_end) = .; #else #define KERNEL_CTORS() #endif /* init and exit section handling */ #define INIT_DATA \ KEEP(*(SORT(___kentry+*))) \ *(.init.data) \ MEM_DISCARD(init.data) \ KERNEL_CTORS() \ MCOUNT_REC() \ *(.init.rodata .init.rodata.*) \ FTRACE_EVENTS() \ TRACE_SYSCALLS() \ KPROBE_BLACKLIST() \ MEM_DISCARD(init.rodata) \ CLK_OF_TABLES() \ RESERVEDMEM_OF_TABLES() \ CLKSRC_OF_TABLES() \ IOMMU_OF_TABLES() \ MCERR_OF_TABLES() \ CPU_METHOD_OF_TABLES() \ CPUIDLE_METHOD_OF_TABLES() \ KERNEL_DTB() \ IRQCHIP_OF_MATCH_TABLE() \ ACPI_PROBE_TABLE(irqchip) \ ACPI_PROBE_TABLE(clksrc) \ EARLYCON_TABLE() #define INIT_TEXT \ *(.init.text .init.text.*) \ *(.text.startup) \ MEM_DISCARD(init.text) #define EXIT_DATA \ *(.exit.data) \ *(.fini_array) \ *(.dtors) \ MEM_DISCARD(exit.data) \ MEM_DISCARD(exit.rodata) #define EXIT_TEXT \ *(.exit.text) \ *(.text.exit) \ MEM_DISCARD(exit.text) #define EXIT_CALL \ KEEP(*(.exitcall.exit)) /* * bss (Block Started by Symbol) - uninitialized data * zeroed during startup */ #define SBSS(sbss_align) \ . = ALIGN(sbss_align); \ .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \ *(.sbss) \ *(.scommon) \ } /* * Allow archectures to redefine BSS_FIRST_SECTIONS to add extra * sections to the front of bss. */ #ifndef BSS_FIRST_SECTIONS #define BSS_FIRST_SECTIONS #endif #define BSS(bss_align) \ . = ALIGN(bss_align); \ .bss : AT(ADDR(.bss) - LOAD_OFFSET) { \ BSS_FIRST_SECTIONS \ . = ALIGN(PAGE_SIZE); \ *(.bss..page_aligned) \ . = ALIGN(PAGE_SIZE); \ *(.dynbss) \ *(BSS_MAIN) \ *(COMMON) \ } /* * DWARF debug sections. * Symbols in the DWARF debugging sections are relative to * the beginning of the section so we begin them at 0. */ #define DWARF_DEBUG \ /* DWARF 1 */ \ .debug 0 : { *(.debug) } \ .line 0 : { *(.line) } \ /* GNU DWARF 1 extensions */ \ .debug_srcinfo 0 : { *(.debug_srcinfo) } \ .debug_sfnames 0 : { *(.debug_sfnames) } \ /* DWARF 1.1 and DWARF 2 */ \ .debug_aranges 0 : { *(.debug_aranges) } \ .debug_pubnames 0 : { *(.debug_pubnames) } \ /* DWARF 2 */ \ .debug_info 0 : { *(.debug_info \ .gnu.linkonce.wi.*) } \ .debug_abbrev 0 : { *(.debug_abbrev) } \ .debug_line 0 : { *(.debug_line) } \ .debug_frame 0 : { *(.debug_frame) } \ .debug_str 0 : { *(.debug_str) } \ .debug_loc 0 : { *(.debug_loc) } \ .debug_macinfo 0 : { *(.debug_macinfo) } \ /* SGI/MIPS DWARF 2 extensions */ \ .debug_weaknames 0 : { *(.debug_weaknames) } \ .debug_funcnames 0 : { *(.debug_funcnames) } \ .debug_typenames 0 : { *(.debug_typenames) } \ .debug_varnames 0 : { *(.debug_varnames) } \ /* Stabs debugging sections. */ #define STABS_DEBUG \ .stab 0 : { *(.stab) } \ .stabstr 0 : { *(.stabstr) } \ .stab.excl 0 : { *(.stab.excl) } \ .stab.exclstr 0 : { *(.stab.exclstr) } \ .stab.index 0 : { *(.stab.index) } \ .stab.indexstr 0 : { *(.stab.indexstr) } \ .comment 0 : { *(.comment) } #ifdef CONFIG_GENERIC_BUG #define BUG_TABLE \ . = ALIGN(8); \ __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start___bug_table) = .; \ KEEP(*(__bug_table)) \ VMLINUX_SYMBOL(__stop___bug_table) = .; \ } #else #define BUG_TABLE #endif #ifdef CONFIG_PM_TRACE #define TRACEDATA \ . = ALIGN(4); \ .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__tracedata_start) = .; \ *(.tracedata) \ VMLINUX_SYMBOL(__tracedata_end) = .; \ } #else #define TRACEDATA #endif #define NOTES \ .notes : AT(ADDR(.notes) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__start_notes) = .; \ *(.note.*) \ VMLINUX_SYMBOL(__stop_notes) = .; \ } #define INIT_SETUP(initsetup_align) \ . = ALIGN(initsetup_align); \ VMLINUX_SYMBOL(__setup_start) = .; \ KEEP(*(.init.setup)) \ VMLINUX_SYMBOL(__setup_end) = .; #define INIT_CALLS_LEVEL(level) \ VMLINUX_SYMBOL(__initcall##level##_start) = .; \ KEEP(*(.initcall##level##.init)) \ KEEP(*(.initcall##level##s.init)) \ #define INIT_CALLS \ VMLINUX_SYMBOL(__initcall_start) = .; \ KEEP(*(.initcallearly.init)) \ INIT_CALLS_LEVEL(0) \ INIT_CALLS_LEVEL(1) \ INIT_CALLS_LEVEL(2) \ INIT_CALLS_LEVEL(3) \ INIT_CALLS_LEVEL(4) \ INIT_CALLS_LEVEL(5) \ INIT_CALLS_LEVEL(rootfs) \ INIT_CALLS_LEVEL(6) \ INIT_CALLS_LEVEL(7) \ VMLINUX_SYMBOL(__initcall_end) = .; #define CON_INITCALL \ VMLINUX_SYMBOL(__con_initcall_start) = .; \ KEEP(*(.con_initcall.init)) \ VMLINUX_SYMBOL(__con_initcall_end) = .; #define SECURITY_INITCALL \ VMLINUX_SYMBOL(__security_initcall_start) = .; \ KEEP(*(.security_initcall.init)) \ VMLINUX_SYMBOL(__security_initcall_end) = .; #ifdef CONFIG_BLK_DEV_INITRD #define INIT_RAM_FS \ . = ALIGN(4); \ VMLINUX_SYMBOL(__initramfs_start) = .; \ KEEP(*(.init.ramfs)) \ . = ALIGN(8); \ KEEP(*(.init.ramfs.info)) #else #define INIT_RAM_FS #endif /* * Default discarded sections. * * Some archs want to discard exit text/data at runtime rather than * link time due to cross-section references such as alt instructions, * bug table, eh_frame, etc. DISCARDS must be the last of output * section definitions so that such archs put those in earlier section * definitions. */ #define DISCARDS \ /DISCARD/ : { \ EXIT_TEXT \ EXIT_DATA \ EXIT_CALL \ *(.discard) \ *(.discard.*) \ } /** * PERCPU_INPUT - the percpu input sections * @cacheline: cacheline size * * The core percpu section names and core symbols which do not rely * directly upon load addresses. * * @cacheline is used to align subsections to avoid false cacheline * sharing between subsections for different purposes. */ #define PERCPU_INPUT(cacheline) \ VMLINUX_SYMBOL(__per_cpu_start) = .; \ VMLINUX_SYMBOL(__per_cpu_user_mapped_start) = .; \ *(.data..percpu..first) \ . = ALIGN(cacheline); \ *(.data..percpu..user_mapped) \ *(.data..percpu..user_mapped..shared_aligned) \ . = ALIGN(PAGE_SIZE); \ *(.data..percpu..user_mapped..page_aligned) \ VMLINUX_SYMBOL(__per_cpu_user_mapped_end) = .; \ . = ALIGN(PAGE_SIZE); \ *(.data..percpu..page_aligned) \ . = ALIGN(cacheline); \ *(.data..percpu..read_mostly) \ . = ALIGN(cacheline); \ *(.data..percpu) \ *(.data..percpu..shared_aligned) \ VMLINUX_SYMBOL(__per_cpu_end) = .; /** * PERCPU_VADDR - define output section for percpu area * @cacheline: cacheline size * @vaddr: explicit base address (optional) * @phdr: destination PHDR (optional) * * Macro which expands to output section for percpu area. * * @cacheline is used to align subsections to avoid false cacheline * sharing between subsections for different purposes. * * If @vaddr is not blank, it specifies explicit base address and all * percpu symbols will be offset from the given address. If blank, * @vaddr always equals @laddr + LOAD_OFFSET. * * @phdr defines the output PHDR to use if not blank. Be warned that * output PHDR is sticky. If @phdr is specified, the next output * section in the linker script will go there too. @phdr should have * a leading colon. * * Note that this macros defines __per_cpu_load as an absolute symbol. * If there is no need to put the percpu section at a predetermined * address, use PERCPU_SECTION. */ #define PERCPU_VADDR(cacheline, vaddr, phdr) \ VMLINUX_SYMBOL(__per_cpu_load) = .; \ .data..percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load) \ - LOAD_OFFSET) { \ PERCPU_INPUT(cacheline) \ } phdr \ . = VMLINUX_SYMBOL(__per_cpu_load) + SIZEOF(.data..percpu); /** * PERCPU_SECTION - define output section for percpu area, simple version * @cacheline: cacheline size * * Align to PAGE_SIZE and outputs output section for percpu area. This * macro doesn't manipulate @vaddr or @phdr and __per_cpu_load and * __per_cpu_start will be identical. * * This macro is equivalent to ALIGN(PAGE_SIZE); PERCPU_VADDR(@cacheline,,) * except that __per_cpu_load is defined as a relative symbol against * .data..percpu which is required for relocatable x86_32 configuration. */ #define PERCPU_SECTION(cacheline) \ . = ALIGN(PAGE_SIZE); \ .data..percpu : AT(ADDR(.data..percpu) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(__per_cpu_load) = .; \ PERCPU_INPUT(cacheline) \ } /* * Definition of the high level *_SECTION macros * They will fit only a subset of the architectures */ /* * Writeable data. * All sections are combined in a single .data section. * The sections following CONSTRUCTORS are arranged so their * typical alignment matches. * A cacheline is typical/always less than a PAGE_SIZE so * the sections that has this restriction (or similar) * is located before the ones requiring PAGE_SIZE alignment. * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which * matches the requirement of PAGE_ALIGNED_DATA. * * use 0 as page_align if page_aligned data is not used */ #define RW_DATA_SECTION(cacheline, pagealigned, inittask) \ . = ALIGN(PAGE_SIZE); \ .data : AT(ADDR(.data) - LOAD_OFFSET) { \ INIT_TASK_DATA(inittask) \ NOSAVE_DATA \ PAGE_ALIGNED_DATA(pagealigned) \ CACHELINE_ALIGNED_DATA(cacheline) \ READ_MOSTLY_DATA(cacheline) \ DATA_DATA \ CONSTRUCTORS \ } #define INIT_TEXT_SECTION(inittext_align) \ . = ALIGN(inittext_align); \ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { \ VMLINUX_SYMBOL(_sinittext) = .; \ INIT_TEXT \ VMLINUX_SYMBOL(_einittext) = .; \ } #define INIT_DATA_SECTION(initsetup_align) \ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { \ INIT_DATA \ INIT_SETUP(initsetup_align) \ INIT_CALLS \ CON_INITCALL \ SECURITY_INITCALL \ INIT_RAM_FS \ } #define BSS_SECTION(sbss_align, bss_align, stop_align) \ . = ALIGN(sbss_align); \ VMLINUX_SYMBOL(__bss_start) = .; \ SBSS(sbss_align) \ BSS(bss_align) \ . = ALIGN(stop_align); \ VMLINUX_SYMBOL(__bss_stop) = .;