/* * Remote Controller core header * * Copyright (C) 2009-2010 by Mauro Carvalho Chehab * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #ifndef _RC_CORE #define _RC_CORE #include #include #include #include #include extern int rc_core_debug; #define IR_dprintk(level, fmt, ...) \ do { \ if (rc_core_debug >= level) \ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \ } while (0) /** * enum rc_driver_type - type of the RC output * * @RC_DRIVER_SCANCODE: Driver or hardware generates a scancode * @RC_DRIVER_IR_RAW: Driver or hardware generates pulse/space sequences. * It needs a Infra-Red pulse/space decoder */ enum rc_driver_type { RC_DRIVER_SCANCODE = 0, RC_DRIVER_IR_RAW, }; /** * struct rc_scancode_filter - Filter scan codes. * @data: Scancode data to match. * @mask: Mask of bits of scancode to compare. */ struct rc_scancode_filter { u32 data; u32 mask; }; /** * enum rc_filter_type - Filter type constants. * @RC_FILTER_NORMAL: Filter for normal operation. * @RC_FILTER_WAKEUP: Filter for waking from suspend. * @RC_FILTER_MAX: Number of filter types. */ enum rc_filter_type { RC_FILTER_NORMAL = 0, RC_FILTER_WAKEUP, RC_FILTER_MAX }; /** * struct rc_dev - represents a remote control device * @dev: driver model's view of this device * @initialized: 1 if the device init has completed, 0 otherwise * @sysfs_groups: sysfs attribute groups * @input_name: name of the input child device * @input_phys: physical path to the input child device * @input_id: id of the input child device (struct input_id) * @driver_name: name of the hardware driver which registered this device * @map_name: name of the default keymap * @rc_map: current scan/key table * @lock: used to ensure we've filled in all protocol details before * anyone can call show_protocols or store_protocols * @minor: unique minor remote control device number * @raw: additional data for raw pulse/space devices * @input_dev: the input child device used to communicate events to userspace * @driver_type: specifies if protocol decoding is done in hardware or software * @idle: used to keep track of RX state * @allowed_protocols: bitmask with the supported RC_BIT_* protocols * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols * @allowed_wakeup_protocols: bitmask with the supported RC_BIT_* wakeup protocols * @enabled_wakeup_protocols: bitmask with the enabled RC_BIT_* wakeup protocols * @scancode_filter: scancode filter * @scancode_wakeup_filter: scancode wakeup filters * @scancode_mask: some hardware decoders are not capable of providing the full * scancode to the application. As this is a hardware limit, we can't do * anything with it. Yet, as the same keycode table can be used with other * devices, a mask is provided to allow its usage. Drivers should generally * leave this field in blank * @users: number of current users of the device * @priv: driver-specific data * @keylock: protects the remaining members of the struct * @keypressed: whether a key is currently pressed * @keyup_jiffies: time (in jiffies) when the current keypress should be released * @timer_keyup: timer for releasing a keypress * @last_keycode: keycode of last keypress * @last_protocol: protocol of last keypress * @last_scancode: scancode of last keypress * @last_toggle: toggle value of last command * @min_delay: optional minimum delay to send IR event reset for raw IR decoding * @timeout: optional time after which device stops sending data * @min_timeout: minimum timeout supported by device * @max_timeout: maximum timeout supported by device * @rx_resolution : resolution (in ns) of input sampler * @tx_resolution: resolution (in ns) of output sampler * @change_protocol: allow changing the protocol used on hardware decoders * @change_wakeup_protocol: allow changing the protocol used for wakeup * filtering * @open: callback to allow drivers to enable polling/irq when IR input device * is opened. * @close: callback to allow drivers to disable polling/irq when IR input device * is opened. * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs) * @s_tx_carrier: set transmit carrier frequency * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%) * @s_rx_carrier_range: inform driver about carrier it is expected to handle * @tx_ir: transmit IR * @s_idle: enable/disable hardware idle mode, upon which, * device doesn't interrupt host until it sees IR pulses * @s_learning_mode: enable wide band receiver used for learning * @s_carrier_report: enable carrier reports * @s_filter: set the scancode filter * @s_wakeup_filter: set the wakeup scancode filter * @s_timeout: set hardware timeout in ns */ struct rc_dev { struct device dev; atomic_t initialized; const struct attribute_group *sysfs_groups[5]; const char *input_name; const char *input_phys; struct input_id input_id; char *driver_name; const char *map_name; struct rc_map rc_map; struct mutex lock; unsigned int minor; struct ir_raw_event_ctrl *raw; struct input_dev *input_dev; enum rc_driver_type driver_type; bool idle; u64 allowed_protocols; u64 enabled_protocols; u64 allowed_wakeup_protocols; u64 enabled_wakeup_protocols; struct rc_scancode_filter scancode_filter; struct rc_scancode_filter scancode_wakeup_filter; u32 scancode_mask; u32 users; void *priv; spinlock_t keylock; bool keypressed; unsigned long keyup_jiffies; struct timer_list timer_keyup; u32 last_keycode; enum rc_type last_protocol; u32 last_scancode; u8 last_toggle; u32 min_delay; u32 timeout; u32 min_timeout; u32 max_timeout; u32 rx_resolution; u32 tx_resolution; int (*change_protocol)(struct rc_dev *dev, u64 *rc_type); int (*change_wakeup_protocol)(struct rc_dev *dev, u64 *rc_type); int (*open)(struct rc_dev *dev); void (*close)(struct rc_dev *dev); int (*s_tx_mask)(struct rc_dev *dev, u32 mask); int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); int (*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n); void (*s_idle)(struct rc_dev *dev, bool enable); int (*s_learning_mode)(struct rc_dev *dev, int enable); int (*s_carrier_report) (struct rc_dev *dev, int enable); int (*s_filter)(struct rc_dev *dev, struct rc_scancode_filter *filter); int (*s_wakeup_filter)(struct rc_dev *dev, struct rc_scancode_filter *filter); int (*s_timeout)(struct rc_dev *dev, unsigned int timeout); }; #define to_rc_dev(d) container_of(d, struct rc_dev, dev) /* * From rc-main.c * Those functions can be used on any type of Remote Controller. They * basically creates an input_dev and properly reports the device as a * Remote Controller, at sys/class/rc. */ /** * rc_allocate_device - Allocates a RC device * * returns a pointer to struct rc_dev. */ struct rc_dev *rc_allocate_device(void); /** * rc_free_device - Frees a RC device * * @dev: pointer to struct rc_dev. */ void rc_free_device(struct rc_dev *dev); /** * rc_register_device - Registers a RC device * * @dev: pointer to struct rc_dev. */ int rc_register_device(struct rc_dev *dev); /** * rc_unregister_device - Unregisters a RC device * * @dev: pointer to struct rc_dev. */ void rc_unregister_device(struct rc_dev *dev); /** * rc_open - Opens a RC device * * @rdev: pointer to struct rc_dev. */ int rc_open(struct rc_dev *rdev); /** * rc_close - Closes a RC device * * @rdev: pointer to struct rc_dev. */ void rc_close(struct rc_dev *rdev); void rc_repeat(struct rc_dev *dev); void rc_keydown(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle); void rc_keydown_notimeout(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle); void rc_keyup(struct rc_dev *dev); u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode); /* * From rc-raw.c * The Raw interface is specific to InfraRed. It may be a good idea to * split it later into a separate header. */ enum raw_event_type { IR_SPACE = (1 << 0), IR_PULSE = (1 << 1), IR_START_EVENT = (1 << 2), IR_STOP_EVENT = (1 << 3), }; struct ir_raw_event { union { u32 duration; u32 carrier; }; u8 duty_cycle; unsigned pulse:1; unsigned reset:1; unsigned timeout:1; unsigned carrier_report:1; }; #define DEFINE_IR_RAW_EVENT(event) struct ir_raw_event event = {} static inline void init_ir_raw_event(struct ir_raw_event *ev) { memset(ev, 0, sizeof(*ev)); } #define IR_DEFAULT_TIMEOUT MS_TO_NS(125) #define IR_MAX_DURATION 500000000 /* 500 ms */ #define US_TO_NS(usec) ((usec) * 1000) #define MS_TO_US(msec) ((msec) * 1000) #define MS_TO_NS(msec) ((msec) * 1000 * 1000) void ir_raw_event_handle(struct rc_dev *dev); int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type); int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev); void ir_raw_event_set_idle(struct rc_dev *dev, bool idle); static inline void ir_raw_event_reset(struct rc_dev *dev) { struct ir_raw_event ev = { .reset = true }; ir_raw_event_store(dev, &ev); ir_raw_event_handle(dev); } /* extract mask bits out of data and pack them into the result */ static inline u32 ir_extract_bits(u32 data, u32 mask) { u32 vbit = 1, value = 0; do { if (mask & 1) { if (data & 1) value |= vbit; vbit <<= 1; } data >>= 1; } while (mask >>= 1); return value; } #endif /* _RC_CORE */