/* * Minimal debug/trace/assert driver definitions for * Broadcom 802.11 Networking Adapter. * * Copyright (C) 1999-2015, Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you * under the terms of the GNU General Public License version 2 (the "GPL"), * available at http://www.broadcom.com/licenses/GPLv2.php, with the * following added to such license: * * As a special exception, the copyright holders of this software give you * permission to link this software with independent modules, and to copy and * distribute the resulting executable under terms of your choice, provided that * you also meet, for each linked independent module, the terms and conditions of * the license of that module. An independent module is a module which is not * derived from this software. The special exception does not apply to any * modifications of the software. * * Notwithstanding the above, under no circumstances may you combine this * software in any way with any other Broadcom software provided under a license * other than the GPL, without Broadcom's express prior written consent. * * $Id: wl_dbg.h 472390 2014-04-23 23:32:01Z $ */ #ifndef _wl_dbg_h_ #define _wl_dbg_h_ /* wl_msg_level is a bit vector with defs in wlioctl.h */ extern uint32 wl_msg_level; extern uint32 wl_msg_level2; #define WL_TIMESTAMP() #define WL_PRINT(args) do { WL_TIMESTAMP(); printf args; } while (0) #if defined(EVENT_LOG_COMPILE) && defined(WLMSG_SRSCAN) #define _WL_SRSCAN(fmt, ...) EVENT_LOG(EVENT_LOG_TAG_SRSCAN, fmt, ##__VA_ARGS__) #define WL_SRSCAN(args) _WL_SRSCAN args #else #define WL_SRSCAN(args) #endif #if defined(BCMCONDITIONAL_LOGGING) /* Ideally this should be some include file that vendors can include to conditionalize logging */ /* DBGONLY() macro to reduce ifdefs in code for statements that are only needed when * BCMDBG is defined. */ #define DBGONLY(x) /* To disable a message completely ... until you need it again */ #define WL_NONE(args) #define WL_ERROR(args) do {if (wl_msg_level & WL_ERROR_VAL) WL_PRINT(args);} while (0) #define WL_TRACE(args) #define WL_PRHDRS_MSG(args) #define WL_PRHDRS(i, p, f, t, r, l) #define WL_PRPKT(m, b, n) #define WL_INFORM(args) #define WL_TMP(args) #define WL_OID(args) #define WL_RATE(args) do {if (wl_msg_level & WL_RATE_VAL) WL_PRINT(args);} while (0) #define WL_ASSOC(args) do {if (wl_msg_level & WL_ASSOC_VAL) WL_PRINT(args);} while (0) #define WL_PRUSR(m, b, n) #define WL_PS(args) do {if (wl_msg_level & WL_PS_VAL) WL_PRINT(args);} while (0) #define WL_PORT(args) #define WL_DUAL(args) #define WL_REGULATORY(args) do {if (wl_msg_level & WL_REGULATORY_VAL) WL_PRINT(args);} while (0) #define WL_MPC(args) #define WL_APSTA(args) #define WL_APSTA_BCN(args) #define WL_APSTA_TX(args) #define WL_APSTA_TSF(args) #define WL_APSTA_BSSID(args) #define WL_BA(args) #define WL_MBSS(args) #define WL_PROTO(args) #define WL_CAC(args) do {if (wl_msg_level & WL_CAC_VAL) WL_PRINT(args);} while (0) #define WL_AMSDU(args) #define WL_AMPDU(args) #define WL_FFPLD(args) #define WL_MCHAN(args) #define WL_DFS(args) #define WL_WOWL(args) #define WL_DPT(args) #define WL_ASSOC_OR_DPT(args) #define WL_SCAN(args) do {if (wl_msg_level2 & WL_SCAN_VAL) WL_PRINT(args);} while (0) #define WL_COEX(args) #define WL_RTDC(w, s, i, j) #define WL_RTDC2(w, s, i, j) #define WL_CHANINT(args) #define WL_BTA(args) #define WL_P2P(args) #define WL_ITFR(args) #define WL_TDLS(args) #define WL_MCNX(args) #define WL_PROT(args) #define WL_PSTA(args) #define WL_TRF_MGMT(args) #define WL_L2FILTER(args) #define WL_MQ(args) #define WL_TXBF(args) #define WL_P2PO(args) #define WL_NET_DETECT(args) #define WL_ROAM(args) #define WL_WNM(args) #define WL_AMPDU_UPDN(args) #define WL_AMPDU_RX(args) #define WL_AMPDU_ERR(args) #define WL_AMPDU_TX(args) #define WL_AMPDU_CTL(args) #define WL_AMPDU_HW(args) #define WL_AMPDU_HWTXS(args) #define WL_AMPDU_HWDBG(args) #define WL_AMPDU_STAT(args) #define WL_AMPDU_ERR_ON() 0 #define WL_AMPDU_HW_ON() 0 #define WL_AMPDU_HWTXS_ON() 0 #define WL_APSTA_UPDN(args) #define WL_APSTA_RX(args) #define WL_WSEC(args) #define WL_WSEC_DUMP(args) #define WL_PCIE(args) #define WL_CHANLOG(w, s, i, j) #define WL_ERROR_ON() (wl_msg_level & WL_ERROR_VAL) #define WL_TRACE_ON() 0 #define WL_PRHDRS_ON() 0 #define WL_PRPKT_ON() 0 #define WL_INFORM_ON() 0 #define WL_TMP_ON() 0 #define WL_OID_ON() 0 #define WL_RATE_ON() (wl_msg_level & WL_RATE_VAL) #define WL_ASSOC_ON() (wl_msg_level & WL_ASSOC_VAL) #define WL_PRUSR_ON() 0 #define WL_PS_ON() (wl_msg_level & WL_PS_VAL) #define WL_PORT_ON() 0 #define WL_WSEC_ON() 0 #define WL_WSEC_DUMP_ON() 0 #define WL_MPC_ON() 0 #define WL_REGULATORY_ON() (wl_msg_level & WL_REGULATORY_VAL) #define WL_APSTA_ON() 0 #define WL_DFS_ON() 0 #define WL_MBSS_ON() 0 #define WL_CAC_ON() (wl_msg_level & WL_CAC_VAL) #define WL_AMPDU_ON() 0 #define WL_DPT_ON() 0 #define WL_WOWL_ON() 0 #define WL_SCAN_ON() (wl_msg_level2 & WL_SCAN_VAL) #define WL_BTA_ON() 0 #define WL_P2P_ON() 0 #define WL_ITFR_ON() 0 #define WL_MCHAN_ON() 0 #define WL_TDLS_ON() 0 #define WL_MCNX_ON() 0 #define WL_PROT_ON() 0 #define WL_PSTA_ON() 0 #define WL_TRF_MGMT_ON() 0 #define WL_LPC_ON() 0 #define WL_L2FILTER_ON() 0 #define WL_TXBF_ON() 0 #define WL_P2PO_ON() 0 #define WL_CHANLOG_ON() 0 #define WL_NET_DETECT_ON() 0 #define WL_WNM_ON() 0 #define WL_PCIE_ON() 0 #else /* !BCMDBG */ /* DBGONLY() macro to reduce ifdefs in code for statements that are only needed when * BCMDBG is defined. */ #define DBGONLY(x) /* To disable a message completely ... until you need it again */ #define WL_NONE(args) #define WL_ERROR(args) #define WL_TRACE(args) #define WL_APSTA_UPDN(args) #define WL_APSTA_RX(args) #ifdef WLMSG_WSEC #define WL_WSEC(args) WL_PRINT(args) #define WL_WSEC_DUMP(args) WL_PRINT(args) #else #define WL_WSEC(args) #define WL_WSEC_DUMP(args) #endif #define WL_PCIE(args) do {if (wl_msg_level2 & WL_PCIE_VAL) WL_PRINT(args);} while (0) #define WL_PCIE_ON() (wl_msg_level2 & WL_PCIE_VAL) #endif extern uint32 wl_msg_level; extern uint32 wl_msg_level2; #endif /* _wl_dbg_h_ */