/****************************************************************************** * * Copyright(c) 2007 - 2017 Realtek Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * *****************************************************************************/ /*#define CONFIG_DISABLE_ODM*/ /*#define CONFIG_NO_FW*/ /* * Public General Config */ #define AUTOCONF_INCLUDED #define RTL871X_MODULE_NAME "8821CU" #define DRV_NAME "rtl8821cu" /* Set CONFIG_RTL8821C from Makefile */ #ifndef CONFIG_RTL8821C #define CONFIG_RTL8821C #endif #define CONFIG_USB_HCI #define PLATFORM_LINUX /* * Wi-Fi Functions Config */ #define CONFIG_IEEE80211_BAND_5GHZ #define CONFIG_80211N_HT #define CONFIG_80211AC_VHT #ifdef CONFIG_80211AC_VHT #ifndef CONFIG_80211N_HT #define CONFIG_80211N_HT #endif #endif #ifdef CONFIG_80211N_HT /* #define CONFIG_BEAMFORMING */ #endif /* set CONFIG_IOCTL_CFG80211 from Makefile */ #ifdef CONFIG_IOCTL_CFG80211 /* * Indecate new sta asoc through cfg80211_new_sta * If kernel version >= 3.2 or * version < 3.2 but already apply cfg80211 patch, * RTW_USE_CFG80211_STA_EVENT must be defiend! */ /* Set RTW_USE_CFG80211_STA_EVENT from Makefile */ /* #define RTW_USE_CFG80211_STA_EVENT */ /* Indecate new sta asoc through cfg80211_new_sta */ #define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER /* #define CONFIG_DEBUG_CFG80211 */ /* #define CONFIG_DRV_ISSUE_PROV_REQ */ /* IOT FOR S2 */ #define CONFIG_SET_SCAN_DENY_TIMER #endif /* * Internal General Config */ /* #define CONFIG_H2CLBK */ #define RTW_HALMAC /* Use HALMAC architecture, necessary for 8821C */ #define CONFIG_EMBEDDED_FWIMG /* #define CONFIG_FILE_FWIMG */ #define CONFIG_XMIT_ACK #ifdef CONFIG_XMIT_ACK #define CONFIG_ACTIVE_KEEP_ALIVE_CHECK #endif #define CONFIG_RECV_REORDERING_CTRL #define CONFIG_DFS /* #define CONFIG_SUPPORT_USB_INT */ #ifdef CONFIG_SUPPORT_USB_INT /* #define CONFIG_USB_INTERRUPT_IN_PIPE*/ #endif #ifdef CONFIG_POWER_SAVING #define CONFIG_IPS #ifdef CONFIG_IPS /* #define CONFIG_IPS_LEVEL_2*/ /*enable this to set default IPS mode to IPS_LEVEL_2*/ #define CONFIG_IPS_CHECK_IN_WD /* Do IPS Check in WatchDog. */ #endif /* #define SUPPORT_HW_RFOFF_DETECTED*/ #define CONFIG_LPS #if defined(CONFIG_LPS) /* #define CONFIG_LPS_LCLK*/ #endif #ifdef CONFIG_LPS_LCLK #ifdef CONFIG_POWER_SAVING /* #define CONFIG_XMIT_THREAD_MODE */ #endif #ifndef CONFIG_SUPPORT_USB_INT #define LPS_RPWM_WAIT_MS 300 #define CONFIG_DETECT_CPWM_BY_POLLING #endif /* !CONFIG_SUPPORT_USB_INT */ /* #define DBG_CHECK_FW_PS_STATE */ #endif #ifdef CONFIG_LPS #define CONFIG_WMMPS_STA 1 #endif /* CONFIG_LPS */ #endif /*CONFIG_POWER_SAVING*/ /* before link */ /* #define CONFIG_ANTENNA_DIVERSITY */ /* after link */ #ifdef CONFIG_ANTENNA_DIVERSITY #define CONFIG_HW_ANTENNA_DIVERSITY #endif #define CONFIG_AP_MODE #ifdef CONFIG_AP_MODE /* #define CONFIG_INTERRUPT_BASED_TXBCN */ /* Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs */ #if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN) #undef CONFIG_INTERRUPT_BASED_TXBCN #endif #ifdef CONFIG_INTERRUPT_BASED_TXBCN /* #define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT */ #define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR #endif #define CONFIG_NATIVEAP_MLME #ifndef CONFIG_NATIVEAP_MLME #define CONFIG_HOSTAPD_MLME #endif #define CONFIG_FIND_BEST_CHANNEL #endif #define CONFIG_P2P #ifdef CONFIG_P2P /* The CONFIG_WFD is for supporting the Wi-Fi display */ #define CONFIG_WFD #define CONFIG_P2P_REMOVE_GROUP_INFO /* #define CONFIG_DBG_P2P */ #define CONFIG_P2P_PS /* #define CONFIG_P2P_IPS */ #define CONFIG_P2P_OP_CHK_SOCIAL_CH #define CONFIG_CFG80211_ONECHANNEL_UNDER_CONCURRENT /* replace CONFIG_P2P_CHK_INVITE_CH_LIST flag */ /*#define CONFIG_P2P_INVITE_IOT*/ #endif /* Added by Kurt 20110511 */ #ifdef CONFIG_TDLS #define CONFIG_TDLS_DRIVER_SETUP /* #ifndef CONFIG_WFD #define CONFIG_WFD #endif */ /* #define CONFIG_TDLS_AUTOSETUP */ #define CONFIG_TDLS_AUTOCHECKALIVE #define CONFIG_TDLS_CH_SW /* Enable "CONFIG_TDLS_CH_SW" by default, however limit it to only work in wifi logo test mode but not in normal mode currently */ #endif #define CONFIG_SKB_COPY /* amsdu */ #define CONFIG_RTW_LED #ifdef CONFIG_RTW_LED #define CONFIG_RTW_SW_LED #ifdef CONFIG_RTW_SW_LED /* #define CONFIG_RTW_LED_HANDLED_BY_CMD_THREAD */ #endif #endif /* CONFIG_RTW_LED */ #define CONFIG_GLOBAL_UI_PID /*#define CONFIG_RTW_80211K*/ #define CONFIG_LAYER2_ROAMING #define CONFIG_LAYER2_ROAMING_RESUME /*#define CONFIG_ADAPTOR_INFO_CACHING_FILE */ /* now just applied on 8192cu only, should make it general... */ /*#define CONFIG_RESUME_IN_WORKQUEUE */ /*#define CONFIG_SET_SCAN_DENY_TIMER */ #define CONFIG_LONG_DELAY_ISSUE #define CONFIG_NEW_SIGNAL_STAT_PROCESS /* #define CONFIG_SIGNAL_DISPLAY_DBM */ /*display RX signal with dbm */ #ifdef CONFIG_SIGNAL_DISPLAY_DBM /* #define CONFIG_BACKGROUND_NOISE_MONITOR */ #endif #define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */ /* * Interface Related Config */ #ifndef CONFIG_MINIMAL_MEMORY_USAGE #define CONFIG_USB_TX_AGGREGATION #define CONFIG_USB_RX_AGGREGATION #endif /* #define CONFIG_REDUCE_USB_TX_INT*/ /* Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms. */ /* #define CONFIG_EASY_REPLACEMENT*/ /* * CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now! */ /* #define CONFIG_USE_USB_BUFFER_ALLOC_TX*/ /* Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms. */ /* #define CONFIG_USE_USB_BUFFER_ALLOC_RX*/ /* For RX path */ #ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX #else #define CONFIG_PREALLOC_RECV_SKB #ifdef CONFIG_PREALLOC_RECV_SKB /* #define CONFIG_FIX_NR_BULKIN_BUFFER */ /* only use PREALLOC_RECV_SKB buffer, don't alloc skb at runtime */ #endif #endif /* * USB VENDOR REQ BUFFER ALLOCATION METHOD * if not set we'll use function local variable (stack memory) */ /* #define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE */ #define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC #define CONFIG_USB_VENDOR_REQ_MUTEX #define CONFIG_VENDOR_REQ_RETRY /* #define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ*/ #ifdef CONFIG_WOWLAN #define CONFIG_GTK_OL /* #define CONFIG_ARP_KEEP_ALIVE */ #endif /* CONFIG_WOWLAN */ #ifdef CONFIG_GPIO_WAKEUP #ifndef WAKEUP_GPIO_IDX #define WAKEUP_GPIO_IDX 6 /* WIFI Chip Side */ #endif /* WAKEUP_GPIO_IDX */ #endif /* CONFIG_GPIO_WAKEUP */ /* * HAL Related Config */ /*#define CONFIG_RX_PACKET_APPEND_FCS*/ /*#define CONFIG_ADHOC_WORKAROUND_SETTING*/ #define DISABLE_BB_RF 0 #ifdef CONFIG_MP_INCLUDED #define MP_DRIVER 1 #define CONFIG_MP_IWPRIV_SUPPORT /* #undef CONFIG_USB_TX_AGGREGATION #undef CONFIG_USB_RX_AGGREGATION */ #else #define MP_DRIVER 0 #endif /* * Platform Related Config */ #if defined(CONFIG_PLATFORM_ACTIONS_ATM702X) #ifdef CONFIG_USB_TX_AGGREGATION #undef CONFIG_USB_TX_AGGREGATION #endif #ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX #define CONFIG_USE_USB_BUFFER_ALLOC_TX #endif #ifndef CONFIG_USE_USB_BUFFER_ALLOC_RX #define CONFIG_USE_USB_BUFFER_ALLOC_RX #endif #endif #ifdef CONFIG_BT_COEXIST /* for ODM and outsrc BT-Coex */ #define BT_30_SUPPORT 1 #ifndef CONFIG_LPS /* download reserved page to FW */ #define CONFIG_LPS #endif #else /* !CONFIG_BT_COEXIST */ #define BT_30_SUPPORT 0 #endif /* CONFIG_BT_COEXIST */ #ifdef CONFIG_USB_TX_AGGREGATION /* #define CONFIG_TX_EARLY_MODE */ #endif /* * Debug Related Config */ #define DBG 1 #define DBG_CONFIG_ERROR_DETECT /*#define DBG_CONFIG_ERROR_DETECT_INT*/ /*#define DBG_CONFIG_ERROR_RESET*/ /*#define DBG_IO*/ /*#define DBG_DELAY_OS*/ /*#ifndef DBG_MEM_ALLOC*/ /*#define DBG_MEM_ALLOC*/ /*#endif*/ /*#define DBG_MEMORY_LEAK*/ /*#define DBG_IOCTL*/ /*#define DBG_TX*/ /*#define DBG_XMIT_BUF*/ /*#define DBG_XMIT_BUF_EXT*/ /*#define DBG_TX_DROP_FRAME*/ /*#define DBG_RX_DROP_FRAME*/ /*#define DBG_RX_SEQ*/ /*#define DBG_RX_SIGNAL_DISPLAY_PROCESSING*/ /*#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"*/ /*#define DBG_ROAMING_TEST*/ /*#define DBG_HAL_INIT_PROFILING*/ /*#define DBG_FW_DEBUG_MSG_PKT*/ /* FW use this feature to tx debug broadcast pkt. This pkt include FW debug message*/