76 lines
2.1 KiB
Plaintext
76 lines
2.1 KiB
Plaintext
This describe DT binding of the pad controller driver for Tegra 186 pmc.
|
|
|
|
Required properties:
|
|
- Compatible: Must be nvidia,tegra186-pmc.
|
|
- #padcontroller-cells: Number of padctrl arguments. It must be 1.
|
|
|
|
Pad intitialisation through subnode:
|
|
==================================
|
|
Driver offers the pad initialisation through subnode. The subnode
|
|
under "pmc" node contains the subnode name "io-pad-defaults" which contains
|
|
child node of pads and their settings.
|
|
Following are child node name for the "io-pad-defaults" node.
|
|
audio-hv, dmic-hv, ao-hv, sdmmc1-hv, sdmmc2-hv, sdmmc3-hv,
|
|
spi, dbg, ufs.
|
|
|
|
Optional properties:
|
|
- nvidia,pad-name: Pad name if child node name is not used for pad name.
|
|
- nvidia,io-pad-init-voltage: Voltage value. Options are
|
|
IO_RAIL_VOLTAGE_1_2V,
|
|
IO_RAIL_VOLTAGE_1_8V,
|
|
IO_RAIL_VOLTAGE_3_3V.
|
|
- nvidia,deep-power-down-enable: Boolean, Deep power down enable.
|
|
- nvidia,deep-power-down-disable: Boolean, deep power down disable.
|
|
- nvidia,io-pad-power-enable: boolean, enable io pad power i.e. deep power
|
|
down disable.
|
|
- nvidia,io-pad-power-disable: boolean, disable io pad power i.e. deep
|
|
power down enable.
|
|
- nvidia,enable-dynamic-pad-voltage: boolean, allow dynamic pad voltage
|
|
configuration. If this property is mising then it only
|
|
only allo the configuration during init and thereafter,
|
|
no dynamic switching.
|
|
|
|
Property should be used for better readbility and not conflict with
|
|
other properties.
|
|
|
|
pmc {
|
|
::::
|
|
io-pad-defaults {
|
|
audio-hv {
|
|
nvidia,deep-power-down-enable;
|
|
};
|
|
|
|
dmic-hv {
|
|
nvidia,io-pad-init-voltage = <IO_RAIL_VOLTAGE_1_8V>;
|
|
};
|
|
:::
|
|
};
|
|
};
|
|
|
|
|
|
Example: SDMMC1 pad is 6 and SDMMC3 is 7.
|
|
|
|
tegra_pmc: pmc@c360000 {
|
|
compatible = "nvidia,tegra186-pmc";
|
|
reg = <0x0 0xc360000 0x0 0x400>;
|
|
#padcontroller-cells = <1>;
|
|
status = "disabled";
|
|
io-pad-defaults {
|
|
gpio {
|
|
nvidia,io-pad-init-voltage = <IO_RAIL_VOLTAGE_1_8V>;
|
|
};
|
|
audio-hv {
|
|
nvidia,io-pad-init-voltage = <IO_RAIL_VOLTAGE_3_3V>;
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
sdhci@700b0400 {
|
|
compatible = "nvidia,tegra186-sdhci";
|
|
::::
|
|
pad-controllers = <&tegra_pmc TEGRA186_PAD_SDMMC3>;
|
|
pad-names = "sdmmc";
|
|
::::
|
|
};
|