223 lines
7.1 KiB
Plaintext
223 lines
7.1 KiB
Plaintext
System Control and Power Interface (SCPI) Message Protocol
|
|
----------------------------------------------------------
|
|
|
|
Firmware implementing the SCPI described in ARM document number ARM DUI 0922B
|
|
("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be used
|
|
by Linux to initiate various system control and power operations.
|
|
|
|
Required properties:
|
|
|
|
- compatible : should be "arm,scpi"
|
|
- mboxes: List of phandle and mailbox channel specifiers
|
|
All the channels reserved by remote SCP firmware for use by
|
|
SCPI message protocol should be specified in any order
|
|
- shmem : List of phandle pointing to the shared memory(SHM) area between the
|
|
processors using these mailboxes for IPC, one for each mailbox
|
|
SHM can be any memory reserved for the purpose of this communication
|
|
between the processors.
|
|
|
|
See Documentation/devicetree/bindings/mailbox/mailbox.txt
|
|
for more details about the generic mailbox controller and
|
|
client driver bindings.
|
|
|
|
Clock bindings for the clocks based on SCPI Message Protocol
|
|
------------------------------------------------------------
|
|
|
|
This binding uses the common clock binding[1].
|
|
|
|
Container Node
|
|
==============
|
|
Required properties:
|
|
- compatible : should be "arm,scpi-clocks"
|
|
All the clocks provided by SCP firmware via SCPI message
|
|
protocol much be listed as sub-nodes under this node.
|
|
|
|
Sub-nodes
|
|
=========
|
|
Required properties:
|
|
- compatible : shall include one of the following
|
|
"arm,scpi-dvfs-clocks" - all the clocks that are variable and index based.
|
|
These clocks don't provide an entire range of values between the
|
|
limits but only discrete points within the range. The firmware
|
|
provides the mapping for each such operating frequency and the
|
|
index associated with it. The firmware also manages the
|
|
voltage scaling appropriately with the clock scaling.
|
|
"arm,scpi-variable-clocks" - all the clocks that are variable and provide full
|
|
range within the specified range. The firmware provides the
|
|
range of values within a specified range.
|
|
|
|
Other required properties for all clocks(all from common clock binding):
|
|
- #clock-cells : Should be 1. Contains the Clock ID value used by SCPI commands.
|
|
- clock-output-names : shall be the corresponding names of the outputs.
|
|
- clock-indices: The identifying number for the clocks(i.e.clock_id) in the
|
|
node. It can be non linear and hence provide the mapping of identifiers
|
|
into the clock-output-names array.
|
|
|
|
SRAM and Shared Memory for SCPI
|
|
-------------------------------
|
|
|
|
A small area of SRAM is reserved for SCPI communication between application
|
|
processors and SCP.
|
|
|
|
Required properties:
|
|
- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno
|
|
|
|
The rest of the properties should follow the generic mmio-sram description
|
|
found in ../../sram/sram.txt
|
|
|
|
Each sub-node represents the reserved area for SCPI.
|
|
|
|
Required sub-node properties:
|
|
- reg : The base offset and size of the reserved area with the SRAM
|
|
- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
|
|
shared memory on Juno platforms
|
|
|
|
Sensor bindings for the sensors based on SCPI Message Protocol
|
|
--------------------------------------------------------------
|
|
SCPI provides an API to access the various sensors on the SoC.
|
|
|
|
Required properties:
|
|
- compatible : should be "arm,scpi-sensors".
|
|
- #thermal-sensor-cells: should be set to 1. This property follows the
|
|
thermal device tree bindings[2].
|
|
|
|
Valid cell values are raw identifiers (Sensor
|
|
ID) as used by the firmware. Refer to
|
|
platform documentation for your
|
|
implementation for the IDs to use. For Juno
|
|
R0 and Juno R1 refer to [3].
|
|
|
|
Power domain bindings for the power domains based on SCPI Message Protocol
|
|
------------------------------------------------------------
|
|
|
|
This binding uses the generic power domain binding[4].
|
|
|
|
PM domain providers
|
|
===================
|
|
|
|
Required properties:
|
|
- #power-domain-cells : Should be 1. Contains the device or the power
|
|
domain ID value used by SCPI commands.
|
|
- num-domains: Total number of power domains provided by SCPI. This is
|
|
needed as the SCPI message protocol lacks a mechanism to
|
|
query this information at runtime.
|
|
|
|
PM domain consumers
|
|
===================
|
|
|
|
Required properties:
|
|
- power-domains : A phandle and PM domain specifier as defined by bindings of
|
|
the power controller specified by phandle.
|
|
|
|
[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
[2] Documentation/devicetree/bindings/thermal/thermal.txt
|
|
[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html
|
|
[4] Documentation/devicetree/bindings/power/power_domain.txt
|
|
|
|
Example:
|
|
|
|
sram: sram@50000000 {
|
|
compatible = "arm,juno-sram-ns", "mmio-sram";
|
|
reg = <0x0 0x50000000 0x0 0x10000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x0 0x50000000 0x10000>;
|
|
|
|
cpu_scp_lpri: scp-shmem@0 {
|
|
compatible = "arm,juno-scp-shmem";
|
|
reg = <0x0 0x200>;
|
|
};
|
|
|
|
cpu_scp_hpri: scp-shmem@200 {
|
|
compatible = "arm,juno-scp-shmem";
|
|
reg = <0x200 0x200>;
|
|
};
|
|
};
|
|
|
|
mailbox: mailbox0@40000000 {
|
|
....
|
|
#mbox-cells = <1>;
|
|
};
|
|
|
|
scpi_protocol: scpi@2e000000 {
|
|
compatible = "arm,scpi";
|
|
mboxes = <&mailbox 0 &mailbox 1>;
|
|
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
|
|
|
|
clocks {
|
|
compatible = "arm,scpi-clocks";
|
|
|
|
scpi_dvfs: scpi_clocks@0 {
|
|
compatible = "arm,scpi-dvfs-clocks";
|
|
#clock-cells = <1>;
|
|
clock-indices = <0>, <1>, <2>;
|
|
clock-output-names = "atlclk", "aplclk","gpuclk";
|
|
};
|
|
scpi_clk: scpi_clocks@3 {
|
|
compatible = "arm,scpi-variable-clocks";
|
|
#clock-cells = <1>;
|
|
clock-indices = <3>, <4>;
|
|
clock-output-names = "pxlclk0", "pxlclk1";
|
|
};
|
|
};
|
|
|
|
scpi_sensors0: sensors {
|
|
compatible = "arm,scpi-sensors";
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
scpi_devpd: scpi-power-domains {
|
|
compatible = "arm,scpi-power-domains";
|
|
num-domains = <2>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
};
|
|
|
|
cpu@0 {
|
|
...
|
|
reg = <0 0>;
|
|
clocks = <&scpi_dvfs 0>;
|
|
};
|
|
|
|
hdlcd@7ff60000 {
|
|
...
|
|
reg = <0 0x7ff60000 0 0x1000>;
|
|
clocks = <&scpi_clk 4>;
|
|
power-domains = <&scpi_devpd 1>;
|
|
};
|
|
|
|
thermal-zones {
|
|
soc_thermal {
|
|
polling-delay-passive = <100>;
|
|
polling-delay = <1000>;
|
|
|
|
/* sensor ID */
|
|
thermal-sensors = <&scpi_sensors0 3>;
|
|
...
|
|
};
|
|
};
|
|
|
|
In the above example, the #clock-cells is set to 1 as required.
|
|
scpi_dvfs has 3 output clocks namely: atlclk, aplclk, and gpuclk with 0,
|
|
1 and 2 as clock-indices. scpi_clk has 2 output clocks namely: pxlclk0
|
|
and pxlclk1 with 3 and 4 as clock-indices.
|
|
|
|
The first consumer in the example is cpu@0 and it has '0' as the clock
|
|
specifier which points to the first entry in the output clocks of
|
|
scpi_dvfs i.e. "atlclk".
|
|
|
|
Similarly the second example is hdlcd@7ff60000 and it has pxlclk1 as input
|
|
clock. '4' in the clock specifier here points to the second entry
|
|
in the output clocks of scpi_clocks i.e. "pxlclk1"
|
|
|
|
The thermal-sensors property in the soc_thermal node uses the
|
|
temperature sensor provided by SCP firmware to setup a thermal
|
|
zone. The ID "3" is the sensor identifier for the temperature sensor
|
|
as used by the firmware.
|
|
|
|
The num-domains property in scpi-power-domains domain specifies that
|
|
SCPI provides 2 power domains. The hdlcd node uses the power domain with
|
|
domain ID 1.
|