280 lines
7.9 KiB
Plaintext
280 lines
7.9 KiB
Plaintext
|
|
* Marvell MBus
|
|
|
|
Required properties:
|
|
|
|
- compatible: Should be set to one of the following:
|
|
marvell,armada370-mbus
|
|
marvell,armadaxp-mbus
|
|
marvell,armada375-mbus
|
|
marvell,armada380-mbus
|
|
marvell,kirkwood-mbus
|
|
marvell,dove-mbus
|
|
marvell,orion5x-88f5281-mbus
|
|
marvell,orion5x-88f5182-mbus
|
|
marvell,orion5x-88f5181-mbus
|
|
marvell,orion5x-88f6183-mbus
|
|
marvell,mv78xx0-mbus
|
|
|
|
- address-cells: Must be '2'. The first cell for the MBus ID encoding,
|
|
the second cell for the address offset within the window.
|
|
|
|
- size-cells: Must be '1'.
|
|
|
|
- ranges: Must be set up to provide a proper translation for each child.
|
|
See the examples below.
|
|
|
|
- controller: Contains a single phandle referring to the MBus controller
|
|
node. This allows to specify the node that contains the
|
|
registers that control the MBus, which is typically contained
|
|
within the internal register window (see below).
|
|
|
|
Optional properties:
|
|
|
|
- pcie-mem-aperture: This optional property contains the aperture for
|
|
the memory region of the PCIe driver.
|
|
If it's defined, it must encode the base address and
|
|
size for the address decoding windows allocated for
|
|
the PCIe memory region.
|
|
|
|
- pcie-io-aperture: Just as explained for the above property, this
|
|
optional property contains the aperture for the
|
|
I/O region of the PCIe driver.
|
|
|
|
* Marvell MBus controller
|
|
|
|
Required properties:
|
|
|
|
- compatible: Should be set to "marvell,mbus-controller".
|
|
|
|
- reg: Device's register space.
|
|
Two or three entries are expected (see the examples below):
|
|
the first one controls the devices decoding window,
|
|
the second one controls the SDRAM decoding window and
|
|
the third controls the MBus bridge (only with the
|
|
marvell,armada370-mbus and marvell,armadaxp-mbus
|
|
compatible strings)
|
|
|
|
Example:
|
|
|
|
soc {
|
|
compatible = "marvell,armada370-mbus", "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
controller = <&mbusc>;
|
|
pcie-mem-aperture = <0xe0000000 0x8000000>;
|
|
pcie-io-aperture = <0xe8000000 0x100000>;
|
|
|
|
internal-regs {
|
|
compatible = "simple-bus";
|
|
|
|
mbusc: mbus-controller@20000 {
|
|
compatible = "marvell,mbus-controller";
|
|
reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
|
|
};
|
|
|
|
/* more children ...*/
|
|
};
|
|
};
|
|
|
|
** MBus address decoding window specification
|
|
|
|
The MBus children address space is comprised of two cells: the first one for
|
|
the window ID and the second one for the offset within the window.
|
|
In order to allow to describe valid and non-valid window entries, the
|
|
following encoding is used:
|
|
|
|
0xSIAA0000 0x00oooooo
|
|
|
|
Where:
|
|
|
|
S = 0x0 for a MBus valid window
|
|
S = 0xf for a non-valid window (see below)
|
|
|
|
If S = 0x0, then:
|
|
|
|
I = 4-bit window target ID
|
|
AA = windpw attribute
|
|
|
|
If S = 0xf, then:
|
|
|
|
I = don't care
|
|
AA = 1 for internal register
|
|
|
|
Following the above encoding, for each ranges entry for a MBus valid window
|
|
(S = 0x0), an address decoding window is allocated. On the other side,
|
|
entries for translation that do not correspond to valid windows (S = 0xf)
|
|
are skipped.
|
|
|
|
soc {
|
|
compatible = "marvell,armada370-mbus", "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
controller = <&mbusc>;
|
|
|
|
ranges = <0xf0010000 0 0 0xd0000000 0x100000
|
|
0x01e00000 0 0 0xfff00000 0x100000>;
|
|
|
|
bootrom {
|
|
compatible = "marvell,bootrom";
|
|
reg = <0x01e00000 0 0x100000>;
|
|
};
|
|
|
|
/* other children */
|
|
...
|
|
|
|
internal-regs {
|
|
compatible = "simple-bus";
|
|
ranges = <0 0xf0010000 0 0x100000>;
|
|
|
|
mbusc: mbus-controller@20000 {
|
|
compatible = "marvell,mbus-controller";
|
|
reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
|
|
};
|
|
|
|
/* more children ...*/
|
|
};
|
|
};
|
|
|
|
In the shown example, the translation entry in the 'ranges' property is what
|
|
makes the MBus driver create a static decoding window for the corresponding
|
|
given child device. Note that the binding does not require child nodes to be
|
|
present. Of course, child nodes are needed to probe the devices.
|
|
|
|
Since each window is identified by its target ID and attribute ID there's
|
|
a special macro that can be use to simplify the translation entries:
|
|
|
|
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
|
|
|
|
Using this macro, the above example would be:
|
|
|
|
soc {
|
|
compatible = "marvell,armada370-mbus", "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
controller = <&mbusc>;
|
|
|
|
ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
|
|
MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>;
|
|
|
|
bootrom {
|
|
compatible = "marvell,bootrom";
|
|
reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
|
|
};
|
|
|
|
/* other children */
|
|
...
|
|
|
|
internal-regs {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
|
|
|
|
mbusc: mbus-controller@20000 {
|
|
compatible = "marvell,mbus-controller";
|
|
reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
|
|
};
|
|
|
|
/* other children */
|
|
...
|
|
};
|
|
};
|
|
|
|
|
|
** About the window base address
|
|
|
|
Remember the MBus controller allows a great deal of flexibility for choosing
|
|
the decoding window base address. When planning the device tree layout it's
|
|
possible to choose any address as the base address, provided of course there's
|
|
a region large enough available, and with the required alignment.
|
|
|
|
Yet in other words: there's nothing preventing us from setting a base address
|
|
of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is
|
|
unused.
|
|
|
|
** Window allocation policy
|
|
|
|
The mbus-node ranges property defines a set of mbus windows that are expected
|
|
to be set by the operating system and that are guaranteed to be free of overlaps
|
|
with one another or with the system memory ranges.
|
|
|
|
Each entry in the property refers to exactly one window. If the operating system
|
|
chooses to use a different set of mbus windows, it must ensure that any address
|
|
translations performed from downstream devices are adapted accordingly.
|
|
|
|
The operating system may insert additional mbus windows that do not conflict
|
|
with the ones listed in the ranges, e.g. for mapping PCIe devices.
|
|
As a special case, the internal register window must be set up by the boot
|
|
loader at the address listed in the ranges property, since access to that region
|
|
is needed to set up the other windows.
|
|
|
|
** Example
|
|
|
|
See the example below, where a more complete device tree is shown:
|
|
|
|
soc {
|
|
compatible = "marvell,armadaxp-mbus", "simple-bus";
|
|
controller = <&mbusc>;
|
|
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 /* internal-regs */
|
|
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
|
|
MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
|
|
|
|
bootrom {
|
|
compatible = "marvell,bootrom";
|
|
reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
|
|
};
|
|
|
|
devbus-bootcs {
|
|
status = "okay";
|
|
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
|
|
|
|
/* NOR */
|
|
nor {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0x8000000>;
|
|
bank-width = <2>;
|
|
};
|
|
};
|
|
|
|
pcie-controller {
|
|
compatible = "marvell,armada-xp-pcie";
|
|
status = "okay";
|
|
device_type = "pci";
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
ranges =
|
|
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
|
|
0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
|
|
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
|
|
0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
|
|
0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
|
|
0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */
|
|
0x81000800 0 0 MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>;
|
|
|
|
|
|
pcie@1,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
internal-regs {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
|
|
|
|
mbusc: mbus-controller@20000 {
|
|
reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
|
|
};
|
|
|
|
interrupt-controller@20000 {
|
|
reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
|
};
|
|
};
|
|
};
|