307 lines
8.3 KiB
Plaintext
307 lines
8.3 KiB
Plaintext
Allwinner A10 Display Pipeline
|
|
==============================
|
|
|
|
The Allwinner A10 Display pipeline is composed of several components
|
|
that are going to be documented below:
|
|
|
|
TV Encoder
|
|
----------
|
|
|
|
The TV Encoder supports the composite and VGA output. It is one end of
|
|
the pipeline.
|
|
|
|
Required properties:
|
|
- compatible: value should be "allwinner,sun4i-a10-tv-encoder".
|
|
- reg: base address and size of memory-mapped region
|
|
- clocks: the clocks driving the TV encoder
|
|
- resets: phandle to the reset controller driving the encoder
|
|
|
|
- ports: A ports node with endpoint definitions as defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
|
first port should be the input endpoint.
|
|
|
|
TCON
|
|
----
|
|
|
|
The TCON acts as a timing controller for RGB, LVDS and TV interfaces.
|
|
|
|
Required properties:
|
|
- compatible: value must be either:
|
|
* allwinner,sun5i-a13-tcon
|
|
* allwinner,sun6i-a31-tcon
|
|
* allwinner,sun6i-a31s-tcon
|
|
* allwinner,sun8i-a33-tcon
|
|
- reg: base address and size of memory-mapped region
|
|
- interrupts: interrupt associated to this IP
|
|
- clocks: phandles to the clocks feeding the TCON. Three are needed:
|
|
- 'ahb': the interface clocks
|
|
- 'tcon-ch0': The clock driving the TCON channel 0
|
|
- resets: phandles to the reset controllers driving the encoder
|
|
- "lcd": the reset line for the TCON channel 0
|
|
|
|
- clock-names: the clock names mentioned above
|
|
- reset-names: the reset names mentioned above
|
|
- clock-output-names: Name of the pixel clock created
|
|
|
|
- ports: A ports node with endpoint definitions as defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
|
first port should be the input endpoint, the second one the output
|
|
|
|
The output may have multiple endpoints. The TCON has two channels,
|
|
usually with the first channel being used for the panels interfaces
|
|
(RGB, LVDS, etc.), and the second being used for the outputs that
|
|
require another controller (TV Encoder, HDMI, etc.). The endpoints
|
|
will take an extra property, allwinner,tcon-channel, to specify the
|
|
channel the endpoint is associated to. If that property is not
|
|
present, the endpoint number will be used as the channel number.
|
|
|
|
On SoCs other than the A33, there is one more clock required:
|
|
- 'tcon-ch1': The clock driving the TCON channel 1
|
|
|
|
DRC
|
|
---
|
|
|
|
The DRC (Dynamic Range Controller), found in the latest Allwinner SoCs
|
|
(A31, A23, A33), allows to dynamically adjust pixel
|
|
brightness/contrast based on histogram measurements for LCD content
|
|
adaptive backlight control.
|
|
|
|
|
|
Required properties:
|
|
- compatible: value must be one of:
|
|
* allwinner,sun8i-a33-drc
|
|
- reg: base address and size of the memory-mapped region.
|
|
- interrupts: interrupt associated to this IP
|
|
- clocks: phandles to the clocks feeding the DRC
|
|
* ahb: the DRC interface clock
|
|
* mod: the DRC module clock
|
|
* ram: the DRC DRAM clock
|
|
- clock-names: the clock names mentioned above
|
|
- resets: phandles to the reset line driving the DRC
|
|
|
|
- ports: A ports node with endpoint definitions as defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
|
first port should be the input endpoints, the second one the outputs
|
|
|
|
Display Engine Backend
|
|
----------------------
|
|
|
|
The display engine backend exposes layers and sprites to the
|
|
system.
|
|
|
|
Required properties:
|
|
- compatible: value must be one of:
|
|
* allwinner,sun5i-a13-display-backend
|
|
* allwinner,sun6i-a31-display-backend
|
|
* allwinner,sun8i-a33-display-backend
|
|
- reg: base address and size of the memory-mapped region.
|
|
- clocks: phandles to the clocks feeding the frontend and backend
|
|
* ahb: the backend interface clock
|
|
* mod: the backend module clock
|
|
* ram: the backend DRAM clock
|
|
- clock-names: the clock names mentioned above
|
|
- resets: phandles to the reset controllers driving the backend
|
|
|
|
- ports: A ports node with endpoint definitions as defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
|
first port should be the input endpoints, the second one the output
|
|
|
|
On the A33, some additional properties are required:
|
|
- reg needs to have an additional region corresponding to the SAT
|
|
- reg-names need to be set, with "be" and "sat"
|
|
- clocks and clock-names need to have a phandle to the SAT bus
|
|
clocks, whose name will be "sat"
|
|
- resets and reset-names need to have a phandle to the SAT bus
|
|
resets, whose name will be "sat"
|
|
|
|
Display Engine Frontend
|
|
-----------------------
|
|
|
|
The display engine frontend does formats conversion, scaling,
|
|
deinterlacing and color space conversion.
|
|
|
|
Required properties:
|
|
- compatible: value must be one of:
|
|
* allwinner,sun5i-a13-display-frontend
|
|
* allwinner,sun6i-a31-display-frontend
|
|
* allwinner,sun8i-a33-display-frontend
|
|
- reg: base address and size of the memory-mapped region.
|
|
- interrupts: interrupt associated to this IP
|
|
- clocks: phandles to the clocks feeding the frontend and backend
|
|
* ahb: the backend interface clock
|
|
* mod: the backend module clock
|
|
* ram: the backend DRAM clock
|
|
- clock-names: the clock names mentioned above
|
|
- resets: phandles to the reset controllers driving the backend
|
|
|
|
- ports: A ports node with endpoint definitions as defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The
|
|
first port should be the input endpoints, the second one the outputs
|
|
|
|
|
|
Display Engine Pipeline
|
|
-----------------------
|
|
|
|
The display engine pipeline (and its entry point, since it can be
|
|
either directly the backend or the frontend) is represented as an
|
|
extra node.
|
|
|
|
Required properties:
|
|
- compatible: value must be one of:
|
|
* allwinner,sun5i-a13-display-engine
|
|
* allwinner,sun6i-a31-display-engine
|
|
* allwinner,sun6i-a31s-display-engine
|
|
* allwinner,sun8i-a33-display-engine
|
|
|
|
- allwinner,pipelines: list of phandle to the display engine
|
|
frontends available.
|
|
|
|
Example:
|
|
|
|
panel: panel {
|
|
compatible = "olimex,lcd-olinuxino-43-ts";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
panel_input: endpoint {
|
|
remote-endpoint = <&tcon0_out_panel>;
|
|
};
|
|
};
|
|
};
|
|
|
|
tve0: tv-encoder@01c0a000 {
|
|
compatible = "allwinner,sun4i-a10-tv-encoder";
|
|
reg = <0x01c0a000 0x1000>;
|
|
clocks = <&ahb_gates 34>;
|
|
resets = <&tcon_ch0_clk 0>;
|
|
|
|
port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
tve0_in_tcon0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&tcon0_out_tve0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
tcon0: lcd-controller@1c0c000 {
|
|
compatible = "allwinner,sun5i-a13-tcon";
|
|
reg = <0x01c0c000 0x1000>;
|
|
interrupts = <44>;
|
|
resets = <&tcon_ch0_clk 1>;
|
|
reset-names = "lcd";
|
|
clocks = <&ahb_gates 36>,
|
|
<&tcon_ch0_clk>,
|
|
<&tcon_ch1_clk>;
|
|
clock-names = "ahb",
|
|
"tcon-ch0",
|
|
"tcon-ch1";
|
|
clock-output-names = "tcon-pixel-clock";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
tcon0_in: port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
tcon0_in_be0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&be0_out_tcon0>;
|
|
};
|
|
};
|
|
|
|
tcon0_out: port@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
tcon0_out_panel: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&panel_input>;
|
|
};
|
|
|
|
tcon0_out_tve0: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&tve0_in_tcon0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
fe0: display-frontend@1e00000 {
|
|
compatible = "allwinner,sun5i-a13-display-frontend";
|
|
reg = <0x01e00000 0x20000>;
|
|
interrupts = <47>;
|
|
clocks = <&ahb_gates 46>, <&de_fe_clk>,
|
|
<&dram_gates 25>;
|
|
clock-names = "ahb", "mod",
|
|
"ram";
|
|
resets = <&de_fe_clk>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
fe0_out: port@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
fe0_out_be0: endpoint {
|
|
remote-endpoint = <&be0_in_fe0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
be0: display-backend@1e60000 {
|
|
compatible = "allwinner,sun5i-a13-display-backend";
|
|
reg = <0x01e60000 0x10000>;
|
|
clocks = <&ahb_gates 44>, <&de_be_clk>,
|
|
<&dram_gates 26>;
|
|
clock-names = "ahb", "mod",
|
|
"ram";
|
|
resets = <&de_be_clk>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
be0_in: port@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
be0_in_fe0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&fe0_out_be0>;
|
|
};
|
|
};
|
|
|
|
be0_out: port@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
|
|
be0_out_tcon0: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&tcon0_in_be0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
display-engine {
|
|
compatible = "allwinner,sun5i-a13-display-engine";
|
|
allwinner,pipelines = <&fe0>;
|
|
};
|