tegrakernel/kernel/kernel-4.9/Documentation/devicetree/bindings/gpio/gpio-zynq.txt

36 lines
1.3 KiB
Plaintext

Xilinx Zynq GPIO controller Device Tree Bindings
-------------------------------------------
Required properties:
- #gpio-cells : Should be two
- First cell is the GPIO line number
- Second cell is used to specify optional
parameters (unused)
- compatible : Should be "xlnx,zynq-gpio-1.0" or "xlnx,zynqmp-gpio-1.0"
- clocks : Clock specifier (see clock bindings for details)
- gpio-controller : Marks the device node as a GPIO controller.
- interrupts : Interrupt specifier (see interrupt bindings for
details)
- interrupt-parent : Must be core interrupt controller
- interrupt-controller : Marks the device node as an interrupt controller.
- #interrupt-cells : Should be 2. The first cell is the GPIO number.
The second cell bits[3:0] is used to specify trigger type and level flags:
1 = low-to-high edge triggered.
2 = high-to-low edge triggered.
4 = active high level-sensitive.
8 = active low level-sensitive.
- reg : Address and length of the register set for the device
Example:
gpio@e000a000 {
#gpio-cells = <2>;
compatible = "xlnx,zynq-gpio-1.0";
clocks = <&clkc 42>;
gpio-controller;
interrupt-parent = <&intc>;
interrupts = <0 20 4>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xe000a000 0x1000>;
};