36 lines
1.4 KiB
Plaintext
36 lines
1.4 KiB
Plaintext
Freescale mx25 TS conversion queue module
|
|
|
|
mx25 touchscreen conversion queue module which controls the ADC unit of the
|
|
mx25 for attached touchscreens.
|
|
|
|
Required properties:
|
|
- compatible: Should be "fsl,imx25-tcq".
|
|
- reg: Memory range of the device.
|
|
- interrupts: Should be the interrupt number associated with this module within
|
|
the tscadc unit (<0>).
|
|
- interrupt-parent: Should be a phandle to the tscadc unit.
|
|
- fsl,wires: Should be '<4>' or '<5>'
|
|
|
|
Optional properties:
|
|
- fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
|
|
- fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
|
|
between 1 and 4096. It is the ratio between the internal reference voltage
|
|
and the measured voltage after the plate was precharged. Resistance between
|
|
plates and therefore the voltage decreases with pressure so that a smaller
|
|
value is equivalent to a higher pressure.
|
|
- fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
|
|
the actual touch detection to wait for an even charge distribution in the
|
|
plate.
|
|
|
|
This device includes two conversion queues which can be added as subnodes.
|
|
The first queue is for the touchscreen, the second for general purpose ADC.
|
|
|
|
Example:
|
|
tsc: tcq@50030400 {
|
|
compatible = "fsl,imx25-tcq";
|
|
reg = <0x50030400 0x60>;
|
|
interrupt-parent = <&tscadc>;
|
|
interrupts = <0>;
|
|
fsl,wires = <4>;
|
|
};
|