131 lines
4.5 KiB
Plaintext
131 lines
4.5 KiB
Plaintext
For pwm-backlight bindings
|
|
|
|
1. backlight node
|
|
Required properties:
|
|
- compatible: "pwm-backlight"
|
|
- pwms: OF device-tree PWM specification (see PWM binding[0])
|
|
- lth-brightness: low threshold brightness to retain the linearity of the graph when the intensity
|
|
of backlight goes to zero(OFF) when the value in not zero almost nearing to zero(some x%)
|
|
- pwm-gpio: specifies a GPIO used for pwm pin if there is.
|
|
- bl-measured: Arrays for backlight calibration, which is usually for linear backlight response.
|
|
- brightness-levels: Array of distinct brightness levels. Typically these
|
|
are in the range from 0 to 255, but any range starting at 0 will do.
|
|
The actual brightness level (PWM duty cycle) will be interpolated
|
|
from these values. 0 means a 0% duty cycle (darkest/off), while the
|
|
last value in the array represents a 100% duty cycle (brightest).
|
|
- default-brightness-level: the default brightness level (index into the
|
|
array defined by the "brightness-levels" property)
|
|
- power-supply: regulator for supply voltage
|
|
|
|
The following "max-brightness" and "default-brightness" are mutually exclusive
|
|
with "brightness-levels" and "default-brightness-level".
|
|
It is used in case where levels are not available on the backlight device
|
|
and the device can interpolate values.
|
|
In this case the minimum value that is considered is 0.
|
|
|
|
- max-brightness: the maximum brighness value that is allowed by the
|
|
backlight device.
|
|
- default-brightness: the default brighness value that is allowed by the
|
|
backlight device.
|
|
|
|
Optional properties:
|
|
- pwm-names: a list of names for the PWM devices specified in the
|
|
"pwms" property (see PWM binding[0])
|
|
- enable-gpios: contains a single GPIO specifier for the GPIO which enables
|
|
and disables the backlight (see GPIO binding[1])
|
|
|
|
It is possible for backlight node to have child backlight node.
|
|
- Child node represents one of multiple backlight settings nodes, which are pwm-backlight based.
|
|
In this case, "lth-brightness", "pwm-gpio", "bl-measured", "brightness-levels",
|
|
"default-brightness-level", "max-brightness" and "default-brightness" properties
|
|
need to be prepared underneath each child node, instead of backlight parent node.
|
|
|
|
1.A) child backlight node
|
|
Child backlight node must be contained in backlight parent node.
|
|
It is possible to have multiple backlight nodes. Additionally, child backlight node
|
|
should have its own compatible property.
|
|
|
|
- compatible: Can be arbitrary, but each child backlight node should have unique name.
|
|
|
|
[0]: Documentation/devicetree/bindings/pwm/pwm.txt
|
|
[1]: Documentation/devicetree/bindings/gpio/gpio.txt
|
|
|
|
Examples:
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 0 5000000>;
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
|
|
power-supply = <&vdd_bl_reg>;
|
|
enable-gpios = <&gpio 58 0>;
|
|
};
|
|
|
|
or
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 1 1000000>;
|
|
max-brightness = <255>;
|
|
default-brightness = <224>;
|
|
};
|
|
|
|
or
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 1 5000000>;
|
|
bl-device {
|
|
status = "okay";
|
|
compatible = "a,wuxga-8-0-bl";
|
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
default-brightness-level = <6>;
|
|
};
|
|
};
|
|
|
|
or
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm 1 40161>;
|
|
bl-device {
|
|
status = "okay";
|
|
compatible = "a,wuxga-8-0-bl";
|
|
max-brightness = <255>;
|
|
default-brightness = <191>;
|
|
bl-measured = < 0 1 2 4 5 6 7 8
|
|
10 11 12 13 14 15 16 18
|
|
19 20 21 22 23 24 25 26
|
|
27 29 30 31 32 33 34 35
|
|
36 38 39 40 41 42 44 45
|
|
46 47 48 49 50 52 53 54
|
|
55 56 57 58 59 61 62 63
|
|
64 65 67 68 69 70 71 72
|
|
73 75 76 77 78 79 80 81
|
|
82 83 84 85 86 87 88 89
|
|
90 91 92 93 94 96 97 98
|
|
99 100 101 102 103 104 105 106
|
|
107 108 109 110 111 112 112 113
|
|
114 115 115 116 117 117 118 119
|
|
120 122 123 124 125 126 128 129
|
|
130 131 132 133 134 135 135 136
|
|
137 138 139 140 141 142 143 145
|
|
146 147 148 149 150 151 152 153
|
|
154 155 156 157 158 159 160 161
|
|
161 162 163 164 164 165 166 166
|
|
167 168 169 170 171 173 174 175
|
|
176 177 178 179 180 181 182 183
|
|
183 184 185 186 187 188 189 189
|
|
190 191 192 193 193 194 195 196
|
|
197 198 199 200 200 201 202 203
|
|
204 205 206 207 208 209 210 211
|
|
212 213 214 216 217 218 219 220
|
|
221 222 223 224 225 226 227 228
|
|
229 230 231 232 233 234 235 235
|
|
236 237 238 239 240 241 242 243
|
|
244 245 247 248 249 250 251 251
|
|
252 252 253 253 254 254 255 255 >;
|
|
};
|
|
};
|