70 lines
2.7 KiB
Plaintext
70 lines
2.7 KiB
Plaintext
* Xilinx NWL PCIe Root Port Bridge DT description
|
|
|
|
Required properties:
|
|
- compatible: Should contain "xlnx,nwl-pcie-2.11"
|
|
- #address-cells: Address representation for root ports, set to <3>
|
|
- #size-cells: Size representation for root ports, set to <2>
|
|
- #interrupt-cells: specifies the number of cells needed to encode an
|
|
interrupt source. The value must be 1.
|
|
- reg: Should contain Bridge, PCIe Controller registers location,
|
|
configuration space, and length
|
|
- reg-names: Must include the following entries:
|
|
"breg": bridge registers
|
|
"pcireg": PCIe controller registers
|
|
"cfg": configuration space region
|
|
- device_type: must be "pci"
|
|
- interrupts: Should contain NWL PCIe interrupt
|
|
- interrupt-names: Must include the following entries:
|
|
"msi1, msi0": interrupt asserted when MSI is received
|
|
"intx": interrupt asserted when a legacy interrupt is received
|
|
"misc": interrupt asserted when miscellaneous is received
|
|
- interrupt-map-mask and interrupt-map: standard PCI properties to define the
|
|
mapping of the PCI interface to interrupt numbers.
|
|
- ranges: ranges for the PCI memory regions (I/O space region is not
|
|
supported by hardware)
|
|
Please refer to the standard PCI bus binding document for a more
|
|
detailed explanation
|
|
- msi-controller: indicates that this is MSI controller node
|
|
- msi-parent: MSI parent of the root complex itself
|
|
- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts
|
|
- interrupt-controller: identifies the node as an interrupt controller
|
|
- #interrupt-cells: should be set to 1
|
|
- #address-cells: specifies the number of cells needed to encode an
|
|
address. The value must be 0.
|
|
|
|
|
|
Example:
|
|
++++++++
|
|
|
|
nwl_pcie: pcie@fd0e0000 {
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
compatible = "xlnx,nwl-pcie-2.11";
|
|
#interrupt-cells = <1>;
|
|
msi-controller;
|
|
device_type = "pci";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
|
|
interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
|
|
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
|
interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
|
|
<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
|
|
<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
|
|
<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
|
|
|
|
msi-parent = <&nwl_pcie>;
|
|
reg = <0x0 0xfd0e0000 0x0 0x1000>,
|
|
<0x0 0xfd480000 0x0 0x1000>,
|
|
<0x80 0x00000000 0x0 0x1000000>;
|
|
reg-names = "breg", "pcireg", "cfg";
|
|
ranges = <0x02000000 0x00000000 0xe0000000 0x00000000 0xe0000000 0x00000000 0x10000000 /* non-prefetchable memory */
|
|
0x43000000 0x00000006 0x00000000 0x00000006 0x00000000 0x00000002 0x00000000>;/* prefetchable memory */
|
|
|
|
pcie_intc: legacy-interrupt-controller {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
};
|