128 lines
3.8 KiB
Plaintext
128 lines
3.8 KiB
Plaintext
* ISL9238 battery charger devicetree bindings
|
|
|
|
Required properties:
|
|
- compatible : "isil,isl9238"
|
|
- reg: I2C slave address
|
|
|
|
Required nodes:
|
|
- regulators: There must a regulator subnode for the following purposes:
|
|
Enabling voltage supply to vbus port(to enable otg mode)
|
|
|
|
Optional properties:
|
|
- isl,charge-current-limit-ma: to set the charging current limit in ma
|
|
|
|
- isl,max-system-voltage-mv: to set the maximum charging voltage or
|
|
system regulating voltage
|
|
|
|
- isl,max-init-voltage-mv: to set the maximum init charging voltage or
|
|
system default regulating voltage
|
|
|
|
- isl,min-system-voltage-mv: to set the minimum system voltage
|
|
|
|
- isl,input-voltage-limit-mv: to set input voltage limit
|
|
|
|
- isl,adapter-current-limit1-ma: to se the adapter current limit 1
|
|
|
|
- isl,adapter-current-limit2-ma: to se the adapter current limit 2
|
|
|
|
- isl,acprochot-threshold: assertion threshold for adapter overcurrent
|
|
condition.
|
|
|
|
- isl,dcprochot-threshold: assertion threshold for adapter overcurrent
|
|
condition.
|
|
|
|
- isl,trickle-chg-current-ma: to configure trickle charging current
|
|
|
|
- isl,current-sense-res: current_sense_reister(rs1, rs2) to configure
|
|
charging current limit
|
|
charging current depends on sense resister value
|
|
|
|
- isl,adapter-sense-res: adapter_sense_reister(rs1, rs2) to configure
|
|
adapter current limit
|
|
adapter current depends on sense resister value
|
|
|
|
- isl,otg-voltage-mv: to set OTG mode output regulation voltage
|
|
|
|
- isl,otg-current-ma: to set OTG mode curret
|
|
|
|
- isl,disable-regulation: disable input volatge regulation, by default
|
|
input voltage regulation enabled
|
|
|
|
- isl,enable-bat-learn-mode: enable battery learn mode, by default
|
|
battery learn mode disabled
|
|
|
|
- isl,disable-turbo-mode: disable turbo mode, by default
|
|
turbo charging mode enabled
|
|
|
|
- isl,enable-auto-charging: enable auto charging mode
|
|
|
|
- isl,enable-battery-ovp: enables Battery OV (Overvoltage) fault protection
|
|
by default battery ov fault disabled
|
|
|
|
- isl,enable-trigger-acok: enables trigger PROCHOT# with ACOK
|
|
by default acok trigger disabled
|
|
|
|
- isl,enable-prochot-otg-current: enables trigger PROCHOT# with OTGCURRENT
|
|
by default otgcurrent trigger disabled
|
|
|
|
- isl,disable-smbus-timer: disable smbus timer(safety timer)
|
|
by default smbus timer enabled
|
|
smbus timer used to ensure the SMBus master
|
|
is active and to prevent overcharging the battery.
|
|
|
|
- isl,enable-psys-monitor: enables system power monitor PSYS function
|
|
by default PSYS function is disabled
|
|
|
|
- isl,thermal-zone: thermal zone name to get battery temperature
|
|
|
|
- isl,temp-polling-time-sec: polling time to read battey temp and apply
|
|
thermal profile
|
|
|
|
-isl,terminate-chg-current: terminate chagring current, if battery current
|
|
below terminate charging current then disable charging.
|
|
|
|
- isl,temp-range: temperature range for thermal profile
|
|
|
|
- isl,current-voltage-table: current and voltage table for thermal profile
|
|
< 0C - No Charge
|
|
0C to 9C - 1.17A to 13.2V
|
|
10C to 19C - 1.95A to 13.2V
|
|
20C to 49C - 3.90A to 12.75V; then 1.95A 12.75V to 13.2V
|
|
50C to 59C - 1.95A to 12.3V
|
|
> 60C - No Charge
|
|
|
|
vbus regulator properties:
|
|
================
|
|
regulator-name: vbus regulator name.
|
|
|
|
charger regulator properties:
|
|
================
|
|
regulator-name: charger regulator name.
|
|
|
|
Example
|
|
bc_isl9238: isl9238@9 {
|
|
compatible = "isil,isl9238";
|
|
reg = <0x09>;
|
|
isl,charge-current-limit = <4096000>;
|
|
isl,max-system-voltage = <8192000>;
|
|
isl,min-system-voltage = <1024000>;
|
|
isl,input-voltage-limit = <2730000>;
|
|
isl,enable-auto-charging;
|
|
|
|
isl,thermal-zone = "battery";
|
|
isl,temp-polling-time-sec = <5>;
|
|
isl,terminate-chg-current = <78000>;
|
|
isl,temp-range = <0 10 20 50 60>;
|
|
isl,current-voltage-table = <0 780 1170 3900 1950
|
|
0 780 1170 1950 1950
|
|
0 13200 13200 12550 12300>;
|
|
|
|
vbus {
|
|
regulator-name = "otg-vbus-reg";
|
|
};
|
|
|
|
charger {
|
|
regulator-name = "charger-vbus-reg";
|
|
};
|
|
};
|