83 lines
2.6 KiB
Plaintext
83 lines
2.6 KiB
Plaintext
MPC5121 PSC Device Tree Bindings
|
|
|
|
PSC in UART mode
|
|
----------------
|
|
|
|
For PSC in UART mode the needed PSC serial devices
|
|
are specified by fsl,mpc5121-psc-uart nodes in the
|
|
fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
|
|
Controller node fsl,mpc5121-psc-fifo is required there:
|
|
|
|
fsl,mpc512x-psc-uart nodes
|
|
--------------------------
|
|
|
|
Required properties :
|
|
- compatible : Should contain "fsl,<soc>-psc-uart" and "fsl,<soc>-psc"
|
|
Supported <soc>s: mpc5121, mpc5125
|
|
- reg : Offset and length of the register set for the PSC device
|
|
- interrupts : <a b> where a is the interrupt number of the
|
|
PSC FIFO Controller and b is a field that represents an
|
|
encoding of the sense and level information for the interrupt.
|
|
- interrupt-parent : the phandle for the interrupt controller that
|
|
services interrupts for this device.
|
|
|
|
Recommended properties :
|
|
- fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
|
|
- fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
|
|
|
|
PSC in SPI mode
|
|
---------------
|
|
|
|
Similar to the UART mode a PSC can be operated in SPI mode. The compatible used
|
|
for that is fsl,mpc5121-psc-spi. It requires a fsl,mpc5121-psc-fifo as well.
|
|
The required and recommended properties are identical to the
|
|
fsl,mpc5121-psc-uart nodes, just use spi instead of uart in the compatible
|
|
string.
|
|
|
|
fsl,mpc512x-psc-fifo node
|
|
-------------------------
|
|
|
|
Required properties :
|
|
- compatible : Should be "fsl,<soc>-psc-fifo"
|
|
Supported <soc>s: mpc5121, mpc5125
|
|
- reg : Offset and length of the register set for the PSC
|
|
FIFO Controller
|
|
- interrupts : <a b> where a is the interrupt number of the
|
|
PSC FIFO Controller and b is a field that represents an
|
|
encoding of the sense and level information for the interrupt.
|
|
- interrupt-parent : the phandle for the interrupt controller that
|
|
services interrupts for this device.
|
|
|
|
Recommended properties :
|
|
- clocks : specifies the clock needed to operate the fifo controller
|
|
- clock-names : name(s) for the clock(s) listed in clocks
|
|
|
|
Example for a board using PSC0 and PSC1 devices in serial mode:
|
|
|
|
serial@11000 {
|
|
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
|
cell-index = <0>;
|
|
reg = <0x11000 0x100>;
|
|
interrupts = <40 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
fsl,rx-fifo-size = <16>;
|
|
fsl,tx-fifo-size = <16>;
|
|
};
|
|
|
|
serial@11100 {
|
|
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
|
cell-index = <1>;
|
|
reg = <0x11100 0x100>;
|
|
interrupts = <40 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
fsl,rx-fifo-size = <16>;
|
|
fsl,tx-fifo-size = <16>;
|
|
};
|
|
|
|
pscfifo@11f00 {
|
|
compatible = "fsl,mpc5121-psc-fifo";
|
|
reg = <0x11f00 0x100>;
|
|
interrupts = <40 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|