57 lines
1.7 KiB
Plaintext
57 lines
1.7 KiB
Plaintext
Device Tree bindings for Marvell PMU
|
|
|
|
Required properties:
|
|
- compatible: value should be "marvell,dove-pmu".
|
|
May also include "simple-bus" if there are child devices, in which
|
|
case the ranges node is required.
|
|
- reg: two base addresses and sizes of the PM controller and PMU.
|
|
- interrupts: single interrupt number for the PMU interrupt
|
|
- interrupt-controller: must be specified as the PMU itself is an
|
|
interrupt controller.
|
|
- #interrupt-cells: must be 1.
|
|
- #reset-cells: must be 1.
|
|
- domains: sub-node containing domain descriptions
|
|
|
|
Optional properties:
|
|
- ranges: defines the address mapping for child devices, as per the
|
|
standard property of this name. Required when compatible includes
|
|
"simple-bus".
|
|
|
|
Power domain descriptions are listed as child nodes of the "domains"
|
|
sub-node. Each domain has the following properties:
|
|
|
|
Required properties:
|
|
- #power-domain-cells: must be 0.
|
|
|
|
Optional properties:
|
|
- marvell,pmu_pwr_mask: specifies the mask value for PMU power register
|
|
- marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
|
|
- resets: points to the reset manager (PMU node) and reset index.
|
|
|
|
Example:
|
|
|
|
pmu: power-management@d0000 {
|
|
compatible = "marvell,dove-pmu";
|
|
reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
|
|
interrupts = <33>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
#reset-cells = <1>;
|
|
|
|
domains {
|
|
vpu_domain: vpu-domain {
|
|
#power-domain-cells = <0>;
|
|
marvell,pmu_pwr_mask = <0x00000008>;
|
|
marvell,pmu_iso_mask = <0x00000001>;
|
|
resets = <&pmu 16>;
|
|
};
|
|
|
|
gpu_domain: gpu-domain {
|
|
#power-domain-cells = <0>;
|
|
marvell,pmu_pwr_mask = <0x00000004>;
|
|
marvell,pmu_iso_mask = <0x00000002>;
|
|
resets = <&pmu 18>;
|
|
};
|
|
};
|
|
};
|