121 lines
3.3 KiB
Plaintext
121 lines
3.3 KiB
Plaintext
Kernel driver for LP5562
|
|
========================
|
|
|
|
* TI LP5562 LED Driver
|
|
|
|
Author: Milo(Woogyom) Kim <milo.kim@ti.com>
|
|
|
|
Description
|
|
|
|
LP5562 can drive up to 4 channels. R/G/B and White.
|
|
LEDs can be controlled directly via the led class control interface.
|
|
|
|
All four channels can be also controlled using the engine micro programs.
|
|
LP5562 has the internal program memory for running various LED patterns.
|
|
For the details, please refer to 'firmware' section in leds-lp55xx.txt
|
|
|
|
Device attribute: engine_mux
|
|
|
|
3 Engines are allocated in LP5562, but the number of channel is 4.
|
|
Therefore each channel should be mapped to the engine number.
|
|
Value : RGB or W
|
|
|
|
This attribute is used for programming LED data with the firmware interface.
|
|
Unlike the LP5521/LP5523/55231, LP5562 has unique feature for the engine mux,
|
|
so additional sysfs is required.
|
|
|
|
LED Map
|
|
Red ... Engine 1 (fixed)
|
|
Green ... Engine 2 (fixed)
|
|
Blue ... Engine 3 (fixed)
|
|
White ... Engine 1 or 2 or 3 (selective)
|
|
|
|
How to load the program data using engine_mux
|
|
|
|
Before loading the LP5562 program data, engine_mux should be written between
|
|
the engine selection and loading the firmware.
|
|
Engine mux has two different mode, RGB and W.
|
|
RGB is used for loading RGB program data, W is used for W program data.
|
|
|
|
For example, run blinking green channel pattern,
|
|
echo 2 > /sys/bus/i2c/devices/xxxx/select_engine # 2 is for green channel
|
|
echo "RGB" > /sys/bus/i2c/devices/xxxx/engine_mux # engine mux for RGB
|
|
echo 1 > /sys/class/firmware/lp5562/loading
|
|
echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
|
|
echo 0 > /sys/class/firmware/lp5562/loading
|
|
echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
|
|
|
|
To run a blinking white pattern,
|
|
echo 1 or 2 or 3 > /sys/bus/i2c/devices/xxxx/select_engine
|
|
echo "W" > /sys/bus/i2c/devices/xxxx/engine_mux
|
|
echo 1 > /sys/class/firmware/lp5562/loading
|
|
echo "4000600040FF6000" > /sys/class/firmware/lp5562/data
|
|
echo 0 > /sys/class/firmware/lp5562/loading
|
|
echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
|
|
|
|
How to load the predefined patterns
|
|
|
|
Please refer to 'leds-lp55xx.txt"
|
|
|
|
Setting Current of Each Channel
|
|
|
|
Like LP5521 and LP5523/55231, LP5562 provides LED current settings.
|
|
The 'led_current' and 'max_current' are used.
|
|
|
|
(Example of Platform data)
|
|
|
|
To configure the platform specific data, lp55xx_platform_data structure is used.
|
|
|
|
static struct lp55xx_led_config lp5562_led_config[] = {
|
|
{
|
|
.name = "R",
|
|
.chan_nr = 0,
|
|
.led_current = 20,
|
|
.max_current = 40,
|
|
},
|
|
{
|
|
.name = "G",
|
|
.chan_nr = 1,
|
|
.led_current = 20,
|
|
.max_current = 40,
|
|
},
|
|
{
|
|
.name = "B",
|
|
.chan_nr = 2,
|
|
.led_current = 20,
|
|
.max_current = 40,
|
|
},
|
|
{
|
|
.name = "W",
|
|
.chan_nr = 3,
|
|
.led_current = 20,
|
|
.max_current = 40,
|
|
},
|
|
};
|
|
|
|
static int lp5562_setup(void)
|
|
{
|
|
/* setup HW resources */
|
|
}
|
|
|
|
static void lp5562_release(void)
|
|
{
|
|
/* Release HW resources */
|
|
}
|
|
|
|
static void lp5562_enable(bool state)
|
|
{
|
|
/* Control of chip enable signal */
|
|
}
|
|
|
|
static struct lp55xx_platform_data lp5562_platform_data = {
|
|
.led_config = lp5562_led_config,
|
|
.num_channels = ARRAY_SIZE(lp5562_led_config),
|
|
.setup_resources = lp5562_setup,
|
|
.release_resources = lp5562_release,
|
|
.enable = lp5562_enable,
|
|
};
|
|
|
|
If the current is set to 0 in the platform data, that channel is
|
|
disabled and it is not visible in the sysfs.
|