383 lines
9.5 KiB
ReStructuredText
383 lines
9.5 KiB
ReStructuredText
.. -*- coding: utf-8; mode: rst -*-
|
|
|
|
.. _dvb_examples:
|
|
|
|
********
|
|
Examples
|
|
********
|
|
|
|
In this section we would like to present some examples for using the DVB
|
|
API.
|
|
|
|
.. note::
|
|
|
|
This section is out of date, and the code below won't even
|
|
compile. Please refer to the
|
|
`libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__ for
|
|
updated/recommended examples.
|
|
|
|
|
|
.. _tuning:
|
|
|
|
Example: Tuning
|
|
===============
|
|
|
|
We will start with a generic tuning subroutine that uses the frontend
|
|
and SEC, as well as the demux devices. The example is given for QPSK
|
|
tuners, but can easily be adjusted for QAM.
|
|
|
|
|
|
.. code-block:: c
|
|
|
|
#include <sys/ioctl.h>
|
|
#include <stdio.h>
|
|
#include <stdint.h>
|
|
#include <sys/types.h>
|
|
#include <sys/stat.h>
|
|
#include <fcntl.h>
|
|
#include <time.h>
|
|
#include <unistd.h>
|
|
|
|
#include <linux/dvb/dmx.h>
|
|
#include <linux/dvb/frontend.h>
|
|
#include <linux/dvb/sec.h>
|
|
#include <sys/poll.h>
|
|
|
|
#define DMX "/dev/dvb/adapter0/demux1"
|
|
#define FRONT "/dev/dvb/adapter0/frontend1"
|
|
#define SEC "/dev/dvb/adapter0/sec1"
|
|
|
|
/* routine for checking if we have a signal and other status information*/
|
|
int FEReadStatus(int fd, fe_status_t *stat)
|
|
{
|
|
int ans;
|
|
|
|
if ( (ans = ioctl(fd,FE_READ_STATUS,stat) < 0)){
|
|
perror("FE READ STATUS: ");
|
|
return -1;
|
|
}
|
|
|
|
if (*stat & FE_HAS_POWER)
|
|
printf("FE HAS POWER\\n");
|
|
|
|
if (*stat & FE_HAS_SIGNAL)
|
|
printf("FE HAS SIGNAL\\n");
|
|
|
|
if (*stat & FE_SPECTRUM_INV)
|
|
printf("SPEKTRUM INV\\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* tune qpsk */
|
|
/* freq: frequency of transponder */
|
|
/* vpid, apid, tpid: PIDs of video, audio and teletext TS packets */
|
|
/* diseqc: DiSEqC address of the used LNB */
|
|
/* pol: Polarisation */
|
|
/* srate: Symbol Rate */
|
|
/* fec. FEC */
|
|
/* lnb_lof1: local frequency of lower LNB band */
|
|
/* lnb_lof2: local frequency of upper LNB band */
|
|
/* lnb_slof: switch frequency of LNB */
|
|
|
|
int set_qpsk_channel(int freq, int vpid, int apid, int tpid,
|
|
int diseqc, int pol, int srate, int fec, int lnb_lof1,
|
|
int lnb_lof2, int lnb_slof)
|
|
{
|
|
struct secCommand scmd;
|
|
struct secCmdSequence scmds;
|
|
struct dmx_pes_filter_params pesFilterParams;
|
|
FrontendParameters frp;
|
|
struct pollfd pfd[1];
|
|
FrontendEvent event;
|
|
int demux1, demux2, demux3, front;
|
|
|
|
frequency = (uint32_t) freq;
|
|
symbolrate = (uint32_t) srate;
|
|
|
|
if((front = open(FRONT,O_RDWR)) < 0){
|
|
perror("FRONTEND DEVICE: ");
|
|
return -1;
|
|
}
|
|
|
|
if((sec = open(SEC,O_RDWR)) < 0){
|
|
perror("SEC DEVICE: ");
|
|
return -1;
|
|
}
|
|
|
|
if (demux1 < 0){
|
|
if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
|
|
< 0){
|
|
perror("DEMUX DEVICE: ");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (demux2 < 0){
|
|
if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
|
|
< 0){
|
|
perror("DEMUX DEVICE: ");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (demux3 < 0){
|
|
if ((demux3=open(DMX, O_RDWR|O_NONBLOCK))
|
|
< 0){
|
|
perror("DEMUX DEVICE: ");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (freq < lnb_slof) {
|
|
frp.Frequency = (freq - lnb_lof1);
|
|
scmds.continuousTone = SEC_TONE_OFF;
|
|
} else {
|
|
frp.Frequency = (freq - lnb_lof2);
|
|
scmds.continuousTone = SEC_TONE_ON;
|
|
}
|
|
frp.Inversion = INVERSION_AUTO;
|
|
if (pol) scmds.voltage = SEC_VOLTAGE_18;
|
|
else scmds.voltage = SEC_VOLTAGE_13;
|
|
|
|
scmd.type=0;
|
|
scmd.u.diseqc.addr=0x10;
|
|
scmd.u.diseqc.cmd=0x38;
|
|
scmd.u.diseqc.numParams=1;
|
|
scmd.u.diseqc.params[0] = 0xF0 | ((diseqc * 4) & 0x0F) |
|
|
(scmds.continuousTone == SEC_TONE_ON ? 1 : 0) |
|
|
(scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0);
|
|
|
|
scmds.miniCommand=SEC_MINI_NONE;
|
|
scmds.numCommands=1;
|
|
scmds.commands=&scmd;
|
|
if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){
|
|
perror("SEC SEND: ");
|
|
return -1;
|
|
}
|
|
|
|
if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){
|
|
perror("SEC SEND: ");
|
|
return -1;
|
|
}
|
|
|
|
frp.u.qpsk.SymbolRate = srate;
|
|
frp.u.qpsk.FEC_inner = fec;
|
|
|
|
if (ioctl(front, FE_SET_FRONTEND, &frp) < 0){
|
|
perror("QPSK TUNE: ");
|
|
return -1;
|
|
}
|
|
|
|
pfd[0].fd = front;
|
|
pfd[0].events = POLLIN;
|
|
|
|
if (poll(pfd,1,3000)){
|
|
if (pfd[0].revents & POLLIN){
|
|
printf("Getting QPSK event\\n");
|
|
if ( ioctl(front, FE_GET_EVENT, &event)
|
|
|
|
== -EOVERFLOW){
|
|
perror("qpsk get event");
|
|
return -1;
|
|
}
|
|
printf("Received ");
|
|
switch(event.type){
|
|
case FE_UNEXPECTED_EV:
|
|
printf("unexpected event\\n");
|
|
return -1;
|
|
case FE_FAILURE_EV:
|
|
printf("failure event\\n");
|
|
return -1;
|
|
|
|
case FE_COMPLETION_EV:
|
|
printf("completion event\\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
pesFilterParams.pid = vpid;
|
|
pesFilterParams.input = DMX_IN_FRONTEND;
|
|
pesFilterParams.output = DMX_OUT_DECODER;
|
|
pesFilterParams.pes_type = DMX_PES_VIDEO;
|
|
pesFilterParams.flags = DMX_IMMEDIATE_START;
|
|
if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
|
|
perror("set_vpid");
|
|
return -1;
|
|
}
|
|
|
|
pesFilterParams.pid = apid;
|
|
pesFilterParams.input = DMX_IN_FRONTEND;
|
|
pesFilterParams.output = DMX_OUT_DECODER;
|
|
pesFilterParams.pes_type = DMX_PES_AUDIO;
|
|
pesFilterParams.flags = DMX_IMMEDIATE_START;
|
|
if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
|
|
perror("set_apid");
|
|
return -1;
|
|
}
|
|
|
|
pesFilterParams.pid = tpid;
|
|
pesFilterParams.input = DMX_IN_FRONTEND;
|
|
pesFilterParams.output = DMX_OUT_DECODER;
|
|
pesFilterParams.pes_type = DMX_PES_TELETEXT;
|
|
pesFilterParams.flags = DMX_IMMEDIATE_START;
|
|
if (ioctl(demux3, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
|
|
perror("set_tpid");
|
|
return -1;
|
|
}
|
|
|
|
return has_signal(fds);
|
|
}
|
|
|
|
The program assumes that you are using a universal LNB and a standard
|
|
DiSEqC switch with up to 4 addresses. Of course, you could build in some
|
|
more checking if tuning was successful and maybe try to repeat the
|
|
tuning process. Depending on the external hardware, i.e. LNB and DiSEqC
|
|
switch, and weather conditions this may be necessary.
|
|
|
|
|
|
.. _the_dvr_device:
|
|
|
|
Example: The DVR device
|
|
========================
|
|
|
|
The following program code shows how to use the DVR device for
|
|
recording.
|
|
|
|
|
|
.. code-block:: c
|
|
|
|
#include <sys/ioctl.h>
|
|
#include <stdio.h>
|
|
#include <stdint.h>
|
|
#include <sys/types.h>
|
|
#include <sys/stat.h>
|
|
#include <fcntl.h>
|
|
#include <time.h>
|
|
#include <unistd.h>
|
|
|
|
#include <linux/dvb/dmx.h>
|
|
#include <linux/dvb/video.h>
|
|
#include <sys/poll.h>
|
|
#define DVR "/dev/dvb/adapter0/dvr1"
|
|
#define AUDIO "/dev/dvb/adapter0/audio1"
|
|
#define VIDEO "/dev/dvb/adapter0/video1"
|
|
|
|
#define BUFFY (188*20)
|
|
#define MAX_LENGTH (1024*1024*5) /* record 5MB */
|
|
|
|
|
|
/* switch the demuxes to recording, assuming the transponder is tuned */
|
|
|
|
/* demux1, demux2: file descriptor of video and audio filters */
|
|
/* vpid, apid: PIDs of video and audio channels */
|
|
|
|
int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid)
|
|
{
|
|
struct dmx_pes_filter_params pesFilterParams;
|
|
|
|
if (demux1 < 0){
|
|
if ((demux1=open(DMX, O_RDWR|O_NONBLOCK))
|
|
< 0){
|
|
perror("DEMUX DEVICE: ");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if (demux2 < 0){
|
|
if ((demux2=open(DMX, O_RDWR|O_NONBLOCK))
|
|
< 0){
|
|
perror("DEMUX DEVICE: ");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
pesFilterParams.pid = vpid;
|
|
pesFilterParams.input = DMX_IN_FRONTEND;
|
|
pesFilterParams.output = DMX_OUT_TS_TAP;
|
|
pesFilterParams.pes_type = DMX_PES_VIDEO;
|
|
pesFilterParams.flags = DMX_IMMEDIATE_START;
|
|
if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
|
|
perror("DEMUX DEVICE");
|
|
return -1;
|
|
}
|
|
pesFilterParams.pid = apid;
|
|
pesFilterParams.input = DMX_IN_FRONTEND;
|
|
pesFilterParams.output = DMX_OUT_TS_TAP;
|
|
pesFilterParams.pes_type = DMX_PES_AUDIO;
|
|
pesFilterParams.flags = DMX_IMMEDIATE_START;
|
|
if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){
|
|
perror("DEMUX DEVICE");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* start recording MAX_LENGTH , assuming the transponder is tuned */
|
|
|
|
/* demux1, demux2: file descriptor of video and audio filters */
|
|
/* vpid, apid: PIDs of video and audio channels */
|
|
int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid)
|
|
{
|
|
int i;
|
|
int len;
|
|
int written;
|
|
uint8_t buf[BUFFY];
|
|
uint64_t length;
|
|
struct pollfd pfd[1];
|
|
int dvr, dvr_out;
|
|
|
|
/* open dvr device */
|
|
if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) < 0){
|
|
perror("DVR DEVICE");
|
|
return -1;
|
|
}
|
|
|
|
/* switch video and audio demuxes to dvr */
|
|
printf ("Switching dvr on\\n");
|
|
i = switch_to_record(demux1, demux2, vpid, apid);
|
|
printf("finished: ");
|
|
|
|
printf("Recording %2.0f MB of test file in TS format\\n",
|
|
MAX_LENGTH/(1024.0*1024.0));
|
|
length = 0;
|
|
|
|
/* open output file */
|
|
if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT
|
|
|O_TRUNC, S_IRUSR|S_IWUSR
|
|
|S_IRGRP|S_IWGRP|S_IROTH|
|
|
S_IWOTH)) < 0){
|
|
perror("Can't open file for dvr test");
|
|
return -1;
|
|
}
|
|
|
|
pfd[0].fd = dvr;
|
|
pfd[0].events = POLLIN;
|
|
|
|
/* poll for dvr data and write to file */
|
|
while (length < MAX_LENGTH ) {
|
|
if (poll(pfd,1,1)){
|
|
if (pfd[0].revents & POLLIN){
|
|
len = read(dvr, buf, BUFFY);
|
|
if (len < 0){
|
|
perror("recording");
|
|
return -1;
|
|
}
|
|
if (len > 0){
|
|
written = 0;
|
|
while (written < len)
|
|
written +=
|
|
write (dvr_out,
|
|
buf, len);
|
|
length += len;
|
|
printf("written %2.0f MB\\r",
|
|
length/1024./1024.);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|