207 lines
8.9 KiB
Plaintext
207 lines
8.9 KiB
Plaintext
ARM Virtual Generic Interrupt Controller v3 and later (VGICv3)
|
|
==============================================================
|
|
|
|
|
|
Device types supported:
|
|
KVM_DEV_TYPE_ARM_VGIC_V3 ARM Generic Interrupt Controller v3.0
|
|
|
|
Only one VGIC instance may be instantiated through this API. The created VGIC
|
|
will act as the VM interrupt controller, requiring emulated user-space devices
|
|
to inject interrupts to the VGIC instead of directly to CPUs. It is not
|
|
possible to create both a GICv3 and GICv2 on the same VM.
|
|
|
|
Creating a guest GICv3 device requires a host GICv3 as well.
|
|
|
|
|
|
Groups:
|
|
KVM_DEV_ARM_VGIC_GRP_ADDR
|
|
Attributes:
|
|
KVM_VGIC_V3_ADDR_TYPE_DIST (rw, 64-bit)
|
|
Base address in the guest physical address space of the GICv3 distributor
|
|
register mappings. Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
|
|
This address needs to be 64K aligned and the region covers 64 KByte.
|
|
|
|
KVM_VGIC_V3_ADDR_TYPE_REDIST (rw, 64-bit)
|
|
Base address in the guest physical address space of the GICv3
|
|
redistributor register mappings. There are two 64K pages for each
|
|
VCPU and all of the redistributor pages are contiguous.
|
|
Only valid for KVM_DEV_TYPE_ARM_VGIC_V3.
|
|
This address needs to be 64K aligned.
|
|
Errors:
|
|
-E2BIG: Address outside of addressable IPA range
|
|
-EINVAL: Incorrectly aligned address
|
|
-EEXIST: Address already configured
|
|
-ENXIO: The group or attribute is unknown/unsupported for this device
|
|
or hardware support is missing.
|
|
-EFAULT: Invalid user pointer for attr->addr.
|
|
|
|
|
|
|
|
KVM_DEV_ARM_VGIC_GRP_DIST_REGS
|
|
KVM_DEV_ARM_VGIC_GRP_REDIST_REGS
|
|
Attributes:
|
|
The attr field of kvm_device_attr encodes two values:
|
|
bits: | 63 .... 32 | 31 .... 0 |
|
|
values: | mpidr | offset |
|
|
|
|
All distributor regs are (rw, 32-bit) and kvm_device_attr.addr points to a
|
|
__u32 value. 64-bit registers must be accessed by separately accessing the
|
|
lower and higher word.
|
|
|
|
Writes to read-only registers are ignored by the kernel.
|
|
|
|
KVM_DEV_ARM_VGIC_GRP_DIST_REGS accesses the main distributor registers.
|
|
KVM_DEV_ARM_VGIC_GRP_REDIST_REGS accesses the redistributor of the CPU
|
|
specified by the mpidr.
|
|
|
|
The offset is relative to the "[Re]Distributor base address" as defined
|
|
in the GICv3/4 specs. Getting or setting such a register has the same
|
|
effect as reading or writing the register on real hardware, except for the
|
|
following registers: GICD_STATUSR, GICR_STATUSR, GICD_ISPENDR,
|
|
GICR_ISPENDR0, GICD_ICPENDR, and GICR_ICPENDR0. These registers behave
|
|
differently when accessed via this interface compared to their
|
|
architecturally defined behavior to allow software a full view of the
|
|
VGIC's internal state.
|
|
|
|
The mpidr field is used to specify which
|
|
redistributor is accessed. The mpidr is ignored for the distributor.
|
|
|
|
The mpidr encoding is based on the affinity information in the
|
|
architecture defined MPIDR, and the field is encoded as follows:
|
|
| 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 |
|
|
| Aff3 | Aff2 | Aff1 | Aff0 |
|
|
|
|
Note that distributor fields are not banked, but return the same value
|
|
regardless of the mpidr used to access the register.
|
|
|
|
The GICD_STATUSR and GICR_STATUSR registers are architecturally defined such
|
|
that a write of a clear bit has no effect, whereas a write with a set bit
|
|
clears that value. To allow userspace to freely set the values of these two
|
|
registers, setting the attributes with the register offsets for these two
|
|
registers simply sets the non-reserved bits to the value written.
|
|
|
|
|
|
Accesses (reads and writes) to the GICD_ISPENDR register region and
|
|
GICR_ISPENDR0 registers get/set the value of the latched pending state for
|
|
the interrupts.
|
|
|
|
This is identical to the value returned by a guest read from ISPENDR for an
|
|
edge triggered interrupt, but may differ for level triggered interrupts.
|
|
For edge triggered interrupts, once an interrupt becomes pending (whether
|
|
because of an edge detected on the input line or because of a guest write
|
|
to ISPENDR) this state is "latched", and only cleared when either the
|
|
interrupt is activated or when the guest writes to ICPENDR. A level
|
|
triggered interrupt may be pending either because the level input is held
|
|
high by a device, or because of a guest write to the ISPENDR register. Only
|
|
ISPENDR writes are latched; if the device lowers the line level then the
|
|
interrupt is no longer pending unless the guest also wrote to ISPENDR, and
|
|
conversely writes to ICPENDR or activations of the interrupt do not clear
|
|
the pending status if the line level is still being held high. (These
|
|
rules are documented in the GICv3 specification descriptions of the ICPENDR
|
|
and ISPENDR registers.) For a level triggered interrupt the value accessed
|
|
here is that of the latch which is set by ISPENDR and cleared by ICPENDR or
|
|
interrupt activation, whereas the value returned by a guest read from
|
|
ISPENDR is the logical OR of the latch value and the input line level.
|
|
|
|
Raw access to the latch state is provided to userspace so that it can save
|
|
and restore the entire GIC internal state (which is defined by the
|
|
combination of the current input line level and the latch state, and cannot
|
|
be deduced from purely the line level and the value of the ISPENDR
|
|
registers).
|
|
|
|
Accesses to GICD_ICPENDR register region and GICR_ICPENDR0 registers have
|
|
RAZ/WI semantics, meaning that reads always return 0 and writes are always
|
|
ignored.
|
|
|
|
Errors:
|
|
-ENXIO: Getting or setting this register is not yet supported
|
|
-EBUSY: One or more VCPUs are running
|
|
|
|
|
|
KVM_DEV_ARM_VGIC_CPU_SYSREGS
|
|
Attributes:
|
|
The attr field of kvm_device_attr encodes two values:
|
|
bits: | 63 .... 32 | 31 .... 16 | 15 .... 0 |
|
|
values: | mpidr | RES | instr |
|
|
|
|
The mpidr field encodes the CPU ID based on the affinity information in the
|
|
architecture defined MPIDR, and the field is encoded as follows:
|
|
| 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 |
|
|
| Aff3 | Aff2 | Aff1 | Aff0 |
|
|
|
|
The instr field encodes the system register to access based on the fields
|
|
defined in the A64 instruction set encoding for system register access
|
|
(RES means the bits are reserved for future use and should be zero):
|
|
|
|
| 15 ... 14 | 13 ... 11 | 10 ... 7 | 6 ... 3 | 2 ... 0 |
|
|
| Op 0 | Op1 | CRn | CRm | Op2 |
|
|
|
|
All system regs accessed through this API are (rw, 64-bit) and
|
|
kvm_device_attr.addr points to a __u64 value.
|
|
|
|
KVM_DEV_ARM_VGIC_CPU_SYSREGS accesses the CPU interface registers for the
|
|
CPU specified by the mpidr field.
|
|
|
|
Errors:
|
|
-ENXIO: Getting or setting this register is not yet supported
|
|
-EBUSY: VCPU is running
|
|
-EINVAL: Invalid mpidr supplied
|
|
|
|
|
|
KVM_DEV_ARM_VGIC_GRP_NR_IRQS
|
|
Attributes:
|
|
A value describing the number of interrupts (SGI, PPI and SPI) for
|
|
this GIC instance, ranging from 64 to 1024, in increments of 32.
|
|
|
|
kvm_device_attr.addr points to a __u32 value.
|
|
|
|
Errors:
|
|
-EINVAL: Value set is out of the expected range
|
|
-EBUSY: Value has already be set.
|
|
|
|
|
|
KVM_DEV_ARM_VGIC_GRP_CTRL
|
|
Attributes:
|
|
KVM_DEV_ARM_VGIC_CTRL_INIT
|
|
request the initialization of the VGIC, no additional parameter in
|
|
kvm_device_attr.addr.
|
|
Errors:
|
|
-ENXIO: VGIC not properly configured as required prior to calling
|
|
this attribute
|
|
-ENODEV: no online VCPU
|
|
-ENOMEM: memory shortage when allocating vgic internal data
|
|
|
|
|
|
KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO
|
|
Attributes:
|
|
The attr field of kvm_device_attr encodes the following values:
|
|
bits: | 63 .... 32 | 31 .... 10 | 9 .... 0 |
|
|
values: | mpidr | info | vINTID |
|
|
|
|
The vINTID specifies which set of IRQs is reported on.
|
|
|
|
The info field specifies which information userspace wants to get or set
|
|
using this interface. Currently we support the following info values:
|
|
|
|
VGIC_LEVEL_INFO_LINE_LEVEL:
|
|
Get/Set the input level of the IRQ line for a set of 32 contiguously
|
|
numbered interrupts.
|
|
vINTID must be a multiple of 32.
|
|
|
|
kvm_device_attr.addr points to a __u32 value which will contain a
|
|
bitmap where a set bit means the interrupt level is asserted.
|
|
|
|
Bit[n] indicates the status for interrupt vINTID + n.
|
|
|
|
SGIs and any interrupt with a higher ID than the number of interrupts
|
|
supported, will be RAZ/WI. LPIs are always edge-triggered and are
|
|
therefore not supported by this interface.
|
|
|
|
PPIs are reported per VCPU as specified in the mpidr field, and SPIs are
|
|
reported with the same value regardless of the mpidr specified.
|
|
|
|
The mpidr field encodes the CPU ID based on the affinity information in the
|
|
architecture defined MPIDR, and the field is encoded as follows:
|
|
| 63 .... 56 | 55 .... 48 | 47 .... 40 | 39 .... 32 |
|
|
| Aff3 | Aff2 | Aff1 | Aff0 |
|