868 lines
22 KiB
C
868 lines
22 KiB
C
/*
|
|
* DBAu1300 init and platform device setup.
|
|
*
|
|
* (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/init.h>
|
|
#include <linux/input.h> /* KEY_* codes */
|
|
#include <linux/i2c.h>
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/ata_platform.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/smsc911x.h>
|
|
#include <linux/wm97xx.h>
|
|
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
#include <asm/mach-au1x00/gpio-au1300.h>
|
|
#include <asm/mach-au1x00/au1100_mmc.h>
|
|
#include <asm/mach-au1x00/au1200fb.h>
|
|
#include <asm/mach-au1x00/au1xxx_dbdma.h>
|
|
#include <asm/mach-au1x00/au1xxx_psc.h>
|
|
#include <asm/mach-db1x00/bcsr.h>
|
|
#include <asm/mach-au1x00/prom.h>
|
|
|
|
#include "platform.h"
|
|
|
|
/* FPGA (external mux) interrupt sources */
|
|
#define DB1300_FIRST_INT (ALCHEMY_GPIC_INT_LAST + 1)
|
|
#define DB1300_IDE_INT (DB1300_FIRST_INT + 0)
|
|
#define DB1300_ETH_INT (DB1300_FIRST_INT + 1)
|
|
#define DB1300_CF_INT (DB1300_FIRST_INT + 2)
|
|
#define DB1300_VIDEO_INT (DB1300_FIRST_INT + 4)
|
|
#define DB1300_HDMI_INT (DB1300_FIRST_INT + 5)
|
|
#define DB1300_DC_INT (DB1300_FIRST_INT + 6)
|
|
#define DB1300_FLASH_INT (DB1300_FIRST_INT + 7)
|
|
#define DB1300_CF_INSERT_INT (DB1300_FIRST_INT + 8)
|
|
#define DB1300_CF_EJECT_INT (DB1300_FIRST_INT + 9)
|
|
#define DB1300_AC97_INT (DB1300_FIRST_INT + 10)
|
|
#define DB1300_AC97_PEN_INT (DB1300_FIRST_INT + 11)
|
|
#define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12)
|
|
#define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13)
|
|
#define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14)
|
|
#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15)
|
|
#define DB1300_LAST_INT (DB1300_FIRST_INT + 15)
|
|
|
|
/* SMSC9210 CS */
|
|
#define DB1300_ETH_PHYS_ADDR 0x19000000
|
|
#define DB1300_ETH_PHYS_END 0x197fffff
|
|
|
|
/* ATA CS */
|
|
#define DB1300_IDE_PHYS_ADDR 0x18800000
|
|
#define DB1300_IDE_REG_SHIFT 5
|
|
#define DB1300_IDE_PHYS_LEN (16 << DB1300_IDE_REG_SHIFT)
|
|
|
|
/* NAND CS */
|
|
#define DB1300_NAND_PHYS_ADDR 0x20000000
|
|
#define DB1300_NAND_PHYS_END 0x20000fff
|
|
|
|
|
|
static struct i2c_board_info db1300_i2c_devs[] __initdata = {
|
|
{ I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */
|
|
{ I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
|
|
};
|
|
|
|
/* multifunction pins to assign to GPIO controller */
|
|
static int db1300_gpio_pins[] __initdata = {
|
|
AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1,
|
|
AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX,
|
|
AU1300_PIN_EXTCLK1,
|
|
-1, /* terminator */
|
|
};
|
|
|
|
/* multifunction pins to assign to device functions */
|
|
static int db1300_dev_pins[] __initdata = {
|
|
/* wake-from-str pins 0-3 */
|
|
AU1300_PIN_WAKE0,
|
|
/* external clock sources for PSC0 */
|
|
AU1300_PIN_EXTCLK0,
|
|
/* 8bit MMC interface on SD0: 6-9 */
|
|
AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6,
|
|
AU1300_PIN_SD0DAT7,
|
|
/* UART1 pins: 11-18 */
|
|
AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR,
|
|
AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR,
|
|
AU1300_PIN_U1RX, AU1300_PIN_U1TX,
|
|
/* UART0 pins: 19-24 */
|
|
AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR,
|
|
AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR,
|
|
/* UART2: 25-26 */
|
|
AU1300_PIN_U2RX, AU1300_PIN_U2TX,
|
|
/* UART3: 27-28 */
|
|
AU1300_PIN_U3RX, AU1300_PIN_U3TX,
|
|
/* LCD controller PWMs, ext pixclock: 30-31 */
|
|
AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN,
|
|
/* SD1 interface: 32-37 */
|
|
AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2,
|
|
AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK,
|
|
/* SD2 interface: 38-43 */
|
|
AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2,
|
|
AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK,
|
|
/* PSC0/1 clocks: 44-45 */
|
|
AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK,
|
|
/* PSCs: 46-49/50-53/54-57/58-61 */
|
|
AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0,
|
|
AU1300_PIN_PSC0D1,
|
|
AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0,
|
|
AU1300_PIN_PSC1D1,
|
|
AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0,
|
|
AU1300_PIN_PSC2D1,
|
|
AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0,
|
|
AU1300_PIN_PSC3D1,
|
|
/* PCMCIA interface: 62-70 */
|
|
AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16,
|
|
AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT,
|
|
AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW,
|
|
/* camera interface H/V sync inputs: 71-72 */
|
|
AU1300_PIN_CIMLS, AU1300_PIN_CIMFS,
|
|
/* PSC2/3 clocks: 73-74 */
|
|
AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK,
|
|
-1, /* terminator */
|
|
};
|
|
|
|
static void __init db1300_gpio_config(void)
|
|
{
|
|
int *i;
|
|
|
|
i = &db1300_dev_pins[0];
|
|
while (*i != -1)
|
|
au1300_pinfunc_to_dev(*i++);
|
|
|
|
i = &db1300_gpio_pins[0];
|
|
while (*i != -1)
|
|
au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */
|
|
|
|
au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX);
|
|
}
|
|
|
|
/**********************************************************************/
|
|
|
|
static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
|
|
unsigned int ctrl)
|
|
{
|
|
struct nand_chip *this = mtd_to_nand(mtd);
|
|
unsigned long ioaddr = (unsigned long)this->IO_ADDR_W;
|
|
|
|
ioaddr &= 0xffffff00;
|
|
|
|
if (ctrl & NAND_CLE) {
|
|
ioaddr += MEM_STNAND_CMD;
|
|
} else if (ctrl & NAND_ALE) {
|
|
ioaddr += MEM_STNAND_ADDR;
|
|
} else {
|
|
/* assume we want to r/w real data by default */
|
|
ioaddr += MEM_STNAND_DATA;
|
|
}
|
|
this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr;
|
|
if (cmd != NAND_CMD_NONE) {
|
|
__raw_writeb(cmd, this->IO_ADDR_W);
|
|
wmb();
|
|
}
|
|
}
|
|
|
|
static int au1300_nand_device_ready(struct mtd_info *mtd)
|
|
{
|
|
return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1;
|
|
}
|
|
|
|
static struct mtd_partition db1300_nand_parts[] = {
|
|
{
|
|
.name = "NAND FS 0",
|
|
.offset = 0,
|
|
.size = 8 * 1024 * 1024,
|
|
},
|
|
{
|
|
.name = "NAND FS 1",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL
|
|
},
|
|
};
|
|
|
|
struct platform_nand_data db1300_nand_platdata = {
|
|
.chip = {
|
|
.nr_chips = 1,
|
|
.chip_offset = 0,
|
|
.nr_partitions = ARRAY_SIZE(db1300_nand_parts),
|
|
.partitions = db1300_nand_parts,
|
|
.chip_delay = 20,
|
|
},
|
|
.ctrl = {
|
|
.dev_ready = au1300_nand_device_ready,
|
|
.cmd_ctrl = au1300_nand_cmd_ctrl,
|
|
},
|
|
};
|
|
|
|
static struct resource db1300_nand_res[] = {
|
|
[0] = {
|
|
.start = DB1300_NAND_PHYS_ADDR,
|
|
.end = DB1300_NAND_PHYS_ADDR + 0xff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device db1300_nand_dev = {
|
|
.name = "gen_nand",
|
|
.num_resources = ARRAY_SIZE(db1300_nand_res),
|
|
.resource = db1300_nand_res,
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &db1300_nand_platdata,
|
|
}
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static struct resource db1300_eth_res[] = {
|
|
[0] = {
|
|
.start = DB1300_ETH_PHYS_ADDR,
|
|
.end = DB1300_ETH_PHYS_END,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = DB1300_ETH_INT,
|
|
.end = DB1300_ETH_INT,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct smsc911x_platform_config db1300_eth_config = {
|
|
.phy_interface = PHY_INTERFACE_MODE_MII,
|
|
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
.flags = SMSC911X_USE_32BIT,
|
|
};
|
|
|
|
static struct platform_device db1300_eth_dev = {
|
|
.name = "smsc911x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(db1300_eth_res),
|
|
.resource = db1300_eth_res,
|
|
.dev = {
|
|
.platform_data = &db1300_eth_config,
|
|
},
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static struct resource au1300_psc1_res[] = {
|
|
[0] = {
|
|
.start = AU1300_PSC1_PHYS_ADDR,
|
|
.end = AU1300_PSC1_PHYS_ADDR + 0x0fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = AU1300_PSC1_INT,
|
|
.end = AU1300_PSC1_INT,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = AU1300_DSCR_CMD0_PSC1_TX,
|
|
.end = AU1300_DSCR_CMD0_PSC1_TX,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
[3] = {
|
|
.start = AU1300_DSCR_CMD0_PSC1_RX,
|
|
.end = AU1300_DSCR_CMD0_PSC1_RX,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
};
|
|
|
|
static struct platform_device db1300_ac97_dev = {
|
|
.name = "au1xpsc_ac97",
|
|
.id = 1, /* PSC ID. match with AC97 codec ID! */
|
|
.num_resources = ARRAY_SIZE(au1300_psc1_res),
|
|
.resource = au1300_psc1_res,
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static struct resource au1300_psc2_res[] = {
|
|
[0] = {
|
|
.start = AU1300_PSC2_PHYS_ADDR,
|
|
.end = AU1300_PSC2_PHYS_ADDR + 0x0fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = AU1300_PSC2_INT,
|
|
.end = AU1300_PSC2_INT,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = AU1300_DSCR_CMD0_PSC2_TX,
|
|
.end = AU1300_DSCR_CMD0_PSC2_TX,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
[3] = {
|
|
.start = AU1300_DSCR_CMD0_PSC2_RX,
|
|
.end = AU1300_DSCR_CMD0_PSC2_RX,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
};
|
|
|
|
static struct platform_device db1300_i2s_dev = {
|
|
.name = "au1xpsc_i2s",
|
|
.id = 2, /* PSC ID */
|
|
.num_resources = ARRAY_SIZE(au1300_psc2_res),
|
|
.resource = au1300_psc2_res,
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static struct resource au1300_psc3_res[] = {
|
|
[0] = {
|
|
.start = AU1300_PSC3_PHYS_ADDR,
|
|
.end = AU1300_PSC3_PHYS_ADDR + 0x0fff,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = AU1300_PSC3_INT,
|
|
.end = AU1300_PSC3_INT,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = AU1300_DSCR_CMD0_PSC3_TX,
|
|
.end = AU1300_DSCR_CMD0_PSC3_TX,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
[3] = {
|
|
.start = AU1300_DSCR_CMD0_PSC3_RX,
|
|
.end = AU1300_DSCR_CMD0_PSC3_RX,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
};
|
|
|
|
static struct platform_device db1300_i2c_dev = {
|
|
.name = "au1xpsc_smbus",
|
|
.id = 0, /* bus number */
|
|
.num_resources = ARRAY_SIZE(au1300_psc3_res),
|
|
.resource = au1300_psc3_res,
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
/* proper key assignments when facing the LCD panel. For key assignments
|
|
* according to the schematics swap up with down and left with right.
|
|
* I chose to use it to emulate the arrow keys of a keyboard.
|
|
*/
|
|
static struct gpio_keys_button db1300_5waysw_arrowkeys[] = {
|
|
{
|
|
.code = KEY_DOWN,
|
|
.gpio = AU1300_PIN_LCDPWM0,
|
|
.type = EV_KEY,
|
|
.debounce_interval = 1,
|
|
.active_low = 1,
|
|
.desc = "5waysw-down",
|
|
},
|
|
{
|
|
.code = KEY_UP,
|
|
.gpio = AU1300_PIN_PSC2SYNC1,
|
|
.type = EV_KEY,
|
|
.debounce_interval = 1,
|
|
.active_low = 1,
|
|
.desc = "5waysw-up",
|
|
},
|
|
{
|
|
.code = KEY_RIGHT,
|
|
.gpio = AU1300_PIN_WAKE3,
|
|
.type = EV_KEY,
|
|
.debounce_interval = 1,
|
|
.active_low = 1,
|
|
.desc = "5waysw-right",
|
|
},
|
|
{
|
|
.code = KEY_LEFT,
|
|
.gpio = AU1300_PIN_WAKE2,
|
|
.type = EV_KEY,
|
|
.debounce_interval = 1,
|
|
.active_low = 1,
|
|
.desc = "5waysw-left",
|
|
},
|
|
{
|
|
.code = KEY_ENTER,
|
|
.gpio = AU1300_PIN_WAKE1,
|
|
.type = EV_KEY,
|
|
.debounce_interval = 1,
|
|
.active_low = 1,
|
|
.desc = "5waysw-push",
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data db1300_5waysw_data = {
|
|
.buttons = db1300_5waysw_arrowkeys,
|
|
.nbuttons = ARRAY_SIZE(db1300_5waysw_arrowkeys),
|
|
.rep = 1,
|
|
.name = "db1300-5wayswitch",
|
|
};
|
|
|
|
static struct platform_device db1300_5waysw_dev = {
|
|
.name = "gpio-keys",
|
|
.dev = {
|
|
.platform_data = &db1300_5waysw_data,
|
|
},
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static struct pata_platform_info db1300_ide_info = {
|
|
.ioport_shift = DB1300_IDE_REG_SHIFT,
|
|
};
|
|
|
|
#define IDE_ALT_START (14 << DB1300_IDE_REG_SHIFT)
|
|
static struct resource db1300_ide_res[] = {
|
|
[0] = {
|
|
.start = DB1300_IDE_PHYS_ADDR,
|
|
.end = DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = DB1300_IDE_PHYS_ADDR + IDE_ALT_START,
|
|
.end = DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[2] = {
|
|
.start = DB1300_IDE_INT,
|
|
.end = DB1300_IDE_INT,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device db1300_ide_dev = {
|
|
.dev = {
|
|
.platform_data = &db1300_ide_info,
|
|
},
|
|
.name = "pata_platform",
|
|
.resource = db1300_ide_res,
|
|
.num_resources = ARRAY_SIZE(db1300_ide_res),
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static irqreturn_t db1300_mmc_cd(int irq, void *ptr)
|
|
{
|
|
void(*mmc_cd)(struct mmc_host *, unsigned long);
|
|
|
|
/* disable the one currently screaming. No other way to shut it up */
|
|
if (irq == DB1300_SD1_INSERT_INT) {
|
|
disable_irq_nosync(DB1300_SD1_INSERT_INT);
|
|
enable_irq(DB1300_SD1_EJECT_INT);
|
|
} else {
|
|
disable_irq_nosync(DB1300_SD1_EJECT_INT);
|
|
enable_irq(DB1300_SD1_INSERT_INT);
|
|
}
|
|
|
|
/* link against CONFIG_MMC=m. We can only be called once MMC core has
|
|
* initialized the controller, so symbol_get() should always succeed.
|
|
*/
|
|
mmc_cd = symbol_get(mmc_detect_change);
|
|
mmc_cd(ptr, msecs_to_jiffies(500));
|
|
symbol_put(mmc_detect_change);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int db1300_mmc_card_readonly(void *mmc_host)
|
|
{
|
|
/* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */
|
|
return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP;
|
|
}
|
|
|
|
static int db1300_mmc_card_inserted(void *mmc_host)
|
|
{
|
|
return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */
|
|
}
|
|
|
|
static int db1300_mmc_cd_setup(void *mmc_host, int en)
|
|
{
|
|
int ret;
|
|
|
|
if (en) {
|
|
ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0,
|
|
"sd_insert", mmc_host);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0,
|
|
"sd_eject", mmc_host);
|
|
if (ret) {
|
|
free_irq(DB1300_SD1_INSERT_INT, mmc_host);
|
|
goto out;
|
|
}
|
|
|
|
if (db1300_mmc_card_inserted(mmc_host))
|
|
enable_irq(DB1300_SD1_EJECT_INT);
|
|
else
|
|
enable_irq(DB1300_SD1_INSERT_INT);
|
|
|
|
} else {
|
|
free_irq(DB1300_SD1_INSERT_INT, mmc_host);
|
|
free_irq(DB1300_SD1_EJECT_INT, mmc_host);
|
|
}
|
|
ret = 0;
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void db1300_mmcled_set(struct led_classdev *led,
|
|
enum led_brightness brightness)
|
|
{
|
|
if (brightness != LED_OFF)
|
|
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
|
|
else
|
|
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
|
|
}
|
|
|
|
static struct led_classdev db1300_mmc_led = {
|
|
.brightness_set = db1300_mmcled_set,
|
|
};
|
|
|
|
struct au1xmmc_platform_data db1300_sd1_platdata = {
|
|
.cd_setup = db1300_mmc_cd_setup,
|
|
.card_inserted = db1300_mmc_card_inserted,
|
|
.card_readonly = db1300_mmc_card_readonly,
|
|
.led = &db1300_mmc_led,
|
|
};
|
|
|
|
static struct resource au1300_sd1_res[] = {
|
|
[0] = {
|
|
.start = AU1300_SD1_PHYS_ADDR,
|
|
.end = AU1300_SD1_PHYS_ADDR,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = AU1300_SD1_INT,
|
|
.end = AU1300_SD1_INT,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = AU1300_DSCR_CMD0_SDMS_TX1,
|
|
.end = AU1300_DSCR_CMD0_SDMS_TX1,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
[3] = {
|
|
.start = AU1300_DSCR_CMD0_SDMS_RX1,
|
|
.end = AU1300_DSCR_CMD0_SDMS_RX1,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
};
|
|
|
|
static struct platform_device db1300_sd1_dev = {
|
|
.dev = {
|
|
.platform_data = &db1300_sd1_platdata,
|
|
},
|
|
.name = "au1xxx-mmc",
|
|
.id = 1,
|
|
.resource = au1300_sd1_res,
|
|
.num_resources = ARRAY_SIZE(au1300_sd1_res),
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static int db1300_movinand_inserted(void *mmc_host)
|
|
{
|
|
return 0; /* disable for now, it doesn't work yet */
|
|
}
|
|
|
|
static int db1300_movinand_readonly(void *mmc_host)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void db1300_movinand_led_set(struct led_classdev *led,
|
|
enum led_brightness brightness)
|
|
{
|
|
if (brightness != LED_OFF)
|
|
bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
|
|
else
|
|
bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
|
|
}
|
|
|
|
static struct led_classdev db1300_movinand_led = {
|
|
.brightness_set = db1300_movinand_led_set,
|
|
};
|
|
|
|
struct au1xmmc_platform_data db1300_sd0_platdata = {
|
|
.card_inserted = db1300_movinand_inserted,
|
|
.card_readonly = db1300_movinand_readonly,
|
|
.led = &db1300_movinand_led,
|
|
.mask_host_caps = MMC_CAP_NEEDS_POLL,
|
|
};
|
|
|
|
static struct resource au1300_sd0_res[] = {
|
|
[0] = {
|
|
.start = AU1100_SD0_PHYS_ADDR,
|
|
.end = AU1100_SD0_PHYS_ADDR,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = AU1300_SD0_INT,
|
|
.end = AU1300_SD0_INT,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
[2] = {
|
|
.start = AU1300_DSCR_CMD0_SDMS_TX0,
|
|
.end = AU1300_DSCR_CMD0_SDMS_TX0,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
[3] = {
|
|
.start = AU1300_DSCR_CMD0_SDMS_RX0,
|
|
.end = AU1300_DSCR_CMD0_SDMS_RX0,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
};
|
|
|
|
static struct platform_device db1300_sd0_dev = {
|
|
.dev = {
|
|
.platform_data = &db1300_sd0_platdata,
|
|
},
|
|
.name = "au1xxx-mmc",
|
|
.id = 0,
|
|
.resource = au1300_sd0_res,
|
|
.num_resources = ARRAY_SIZE(au1300_sd0_res),
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static struct platform_device db1300_wm9715_dev = {
|
|
.name = "wm9712-codec",
|
|
.id = 1, /* ID of PSC for AC97 audio, see asoc glue! */
|
|
};
|
|
|
|
static struct platform_device db1300_ac97dma_dev = {
|
|
.name = "au1xpsc-pcm",
|
|
.id = 1, /* PSC ID */
|
|
};
|
|
|
|
static struct platform_device db1300_i2sdma_dev = {
|
|
.name = "au1xpsc-pcm",
|
|
.id = 2, /* PSC ID */
|
|
};
|
|
|
|
static struct platform_device db1300_sndac97_dev = {
|
|
.name = "db1300-ac97",
|
|
};
|
|
|
|
static struct platform_device db1300_sndi2s_dev = {
|
|
.name = "db1300-i2s",
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static int db1300fb_panel_index(void)
|
|
{
|
|
return 9; /* DB1300_800x480 */
|
|
}
|
|
|
|
static int db1300fb_panel_init(void)
|
|
{
|
|
/* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
|
|
bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD,
|
|
BCSR_BOARD_LCDBL);
|
|
return 0;
|
|
}
|
|
|
|
static int db1300fb_panel_shutdown(void)
|
|
{
|
|
/* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */
|
|
bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL,
|
|
BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD);
|
|
return 0;
|
|
}
|
|
|
|
static struct au1200fb_platdata db1300fb_pd = {
|
|
.panel_index = db1300fb_panel_index,
|
|
.panel_init = db1300fb_panel_init,
|
|
.panel_shutdown = db1300fb_panel_shutdown,
|
|
};
|
|
|
|
static struct resource au1300_lcd_res[] = {
|
|
[0] = {
|
|
.start = AU1200_LCD_PHYS_ADDR,
|
|
.end = AU1200_LCD_PHYS_ADDR + 0x800 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = AU1300_LCD_INT,
|
|
.end = AU1300_LCD_INT,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static struct platform_device db1300_lcd_dev = {
|
|
.name = "au1200-lcd",
|
|
.id = 0,
|
|
.dev = {
|
|
.dma_mask = &au1300_lcd_dmamask,
|
|
.coherent_dma_mask = DMA_BIT_MASK(32),
|
|
.platform_data = &db1300fb_pd,
|
|
},
|
|
.num_resources = ARRAY_SIZE(au1300_lcd_res),
|
|
.resource = au1300_lcd_res,
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static void db1300_wm97xx_irqen(struct wm97xx *wm, int enable)
|
|
{
|
|
if (enable)
|
|
enable_irq(DB1300_AC97_PEN_INT);
|
|
else
|
|
disable_irq_nosync(DB1300_AC97_PEN_INT);
|
|
}
|
|
|
|
static struct wm97xx_mach_ops db1300_wm97xx_ops = {
|
|
.irq_enable = db1300_wm97xx_irqen,
|
|
.irq_gpio = WM97XX_GPIO_3,
|
|
};
|
|
|
|
static int db1300_wm97xx_probe(struct platform_device *pdev)
|
|
{
|
|
struct wm97xx *wm = platform_get_drvdata(pdev);
|
|
|
|
/* external pendown indicator */
|
|
wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
|
|
WM97XX_GPIO_POL_LOW, WM97XX_GPIO_STICKY,
|
|
WM97XX_GPIO_WAKE);
|
|
|
|
/* internal "virtual" pendown gpio */
|
|
wm97xx_config_gpio(wm, WM97XX_GPIO_3, WM97XX_GPIO_OUT,
|
|
WM97XX_GPIO_POL_LOW, WM97XX_GPIO_NOTSTICKY,
|
|
WM97XX_GPIO_NOWAKE);
|
|
|
|
wm->pen_irq = DB1300_AC97_PEN_INT;
|
|
|
|
return wm97xx_register_mach_ops(wm, &db1300_wm97xx_ops);
|
|
}
|
|
|
|
static struct platform_driver db1300_wm97xx_driver = {
|
|
.driver.name = "wm97xx-touch",
|
|
.driver.owner = THIS_MODULE,
|
|
.probe = db1300_wm97xx_probe,
|
|
};
|
|
|
|
/**********************************************************************/
|
|
|
|
static struct platform_device *db1300_dev[] __initdata = {
|
|
&db1300_eth_dev,
|
|
&db1300_i2c_dev,
|
|
&db1300_5waysw_dev,
|
|
&db1300_nand_dev,
|
|
&db1300_ide_dev,
|
|
&db1300_sd0_dev,
|
|
&db1300_sd1_dev,
|
|
&db1300_lcd_dev,
|
|
&db1300_ac97_dev,
|
|
&db1300_i2s_dev,
|
|
&db1300_wm9715_dev,
|
|
&db1300_ac97dma_dev,
|
|
&db1300_i2sdma_dev,
|
|
&db1300_sndac97_dev,
|
|
&db1300_sndi2s_dev,
|
|
};
|
|
|
|
int __init db1300_dev_setup(void)
|
|
{
|
|
int swapped, cpldirq;
|
|
struct clk *c;
|
|
|
|
/* setup CPLD IRQ muxer */
|
|
cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1);
|
|
irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH);
|
|
bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq);
|
|
|
|
/* insert/eject IRQs: one always triggers so don't enable them
|
|
* when doing request_irq() on them. DB1200 has this bug too.
|
|
*/
|
|
irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN);
|
|
irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN);
|
|
irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN);
|
|
irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN);
|
|
|
|
/*
|
|
* setup board
|
|
*/
|
|
prom_get_ethernet_addr(&db1300_eth_config.mac[0]);
|
|
|
|
i2c_register_board_info(0, db1300_i2c_devs,
|
|
ARRAY_SIZE(db1300_i2c_devs));
|
|
|
|
if (platform_driver_register(&db1300_wm97xx_driver))
|
|
pr_warn("DB1300: failed to init touch pen irq support!\n");
|
|
|
|
/* Audio PSC clock is supplied by codecs (PSC1, 2) */
|
|
__raw_writel(PSC_SEL_CLK_SERCLK,
|
|
(void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
|
|
wmb();
|
|
__raw_writel(PSC_SEL_CLK_SERCLK,
|
|
(void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET);
|
|
wmb();
|
|
/* I2C driver wants 50MHz, get as close as possible */
|
|
c = clk_get(NULL, "psc3_intclk");
|
|
if (!IS_ERR(c)) {
|
|
clk_set_rate(c, 50000000);
|
|
clk_prepare_enable(c);
|
|
clk_put(c);
|
|
}
|
|
__raw_writel(PSC_SEL_CLK_INTCLK,
|
|
(void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET);
|
|
wmb();
|
|
|
|
/* enable power to USB ports */
|
|
bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR);
|
|
|
|
/* although it is socket #0, it uses the CPLD bits which previous boards
|
|
* have used for socket #1.
|
|
*/
|
|
db1x_register_pcmcia_socket(
|
|
AU1000_PCMCIA_ATTR_PHYS_ADDR,
|
|
AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1,
|
|
AU1000_PCMCIA_MEM_PHYS_ADDR,
|
|
AU1000_PCMCIA_MEM_PHYS_ADDR + 0x00400000 - 1,
|
|
AU1000_PCMCIA_IO_PHYS_ADDR,
|
|
AU1000_PCMCIA_IO_PHYS_ADDR + 0x00010000 - 1,
|
|
DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1);
|
|
|
|
swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
|
|
db1x_register_norflash(64 << 20, 2, swapped);
|
|
|
|
return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev));
|
|
}
|
|
|
|
|
|
int __init db1300_board_setup(void)
|
|
{
|
|
unsigned short whoami;
|
|
|
|
bcsr_init(DB1300_BCSR_PHYS_ADDR,
|
|
DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS);
|
|
|
|
whoami = bcsr_read(BCSR_WHOAMI);
|
|
if (BCSR_WHOAMI_BOARD(whoami) != BCSR_WHOAMI_DB1300)
|
|
return -ENODEV;
|
|
|
|
db1300_gpio_config();
|
|
|
|
printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
|
|
"BoardID %d CPLD Rev %d DaughtercardID %d\n",
|
|
BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami),
|
|
BCSR_WHOAMI_DCID(whoami));
|
|
|
|
/* enable UARTs, YAMON only enables #2 */
|
|
alchemy_uart_enable(AU1300_UART0_PHYS_ADDR);
|
|
alchemy_uart_enable(AU1300_UART1_PHYS_ADDR);
|
|
alchemy_uart_enable(AU1300_UART3_PHYS_ADDR);
|
|
|
|
return 0;
|
|
}
|