574 lines
15 KiB
C
574 lines
15 KiB
C
/*
|
|
* P1022DS board specific routines
|
|
*
|
|
* Authors: Travis Wheatley <travis.wheatley@freescale.com>
|
|
* Dave Liu <daveliu@freescale.com>
|
|
* Timur Tabi <timur@freescale.com>
|
|
*
|
|
* Copyright 2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* This file is taken from the Freescale P1022DS BSP, with modifications:
|
|
* 2) No AMP support
|
|
* 3) No PCI endpoint support
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/fsl/guts.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/of_platform.h>
|
|
#include <asm/div64.h>
|
|
#include <asm/mpic.h>
|
|
#include <asm/swiotlb.h>
|
|
|
|
#include <sysdev/fsl_soc.h>
|
|
#include <sysdev/fsl_pci.h>
|
|
#include <asm/udbg.h>
|
|
#include <asm/fsl_lbc.h>
|
|
#include "smp.h"
|
|
|
|
#include "mpc85xx.h"
|
|
|
|
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
|
|
|
|
#define PMUXCR_ELBCDIU_MASK 0xc0000000
|
|
#define PMUXCR_ELBCDIU_NOR16 0x80000000
|
|
#define PMUXCR_ELBCDIU_DIU 0x40000000
|
|
|
|
/*
|
|
* Board-specific initialization of the DIU. This code should probably be
|
|
* executed when the DIU is opened, rather than in arch code, but the DIU
|
|
* driver does not have a mechanism for this (yet).
|
|
*
|
|
* This is especially problematic on the P1022DS because the local bus (eLBC)
|
|
* and the DIU video signals share the same pins, which means that enabling the
|
|
* DIU will disable access to NOR flash.
|
|
*/
|
|
|
|
/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */
|
|
#define CLKDVDR_PXCKEN 0x80000000
|
|
#define CLKDVDR_PXCKINV 0x10000000
|
|
#define CLKDVDR_PXCKDLY 0x06000000
|
|
#define CLKDVDR_PXCLK_MASK 0x00FF0000
|
|
|
|
/* Some ngPIXIS register definitions */
|
|
#define PX_CTL 3
|
|
#define PX_BRDCFG0 8
|
|
#define PX_BRDCFG1 9
|
|
|
|
#define PX_BRDCFG0_ELBC_SPI_MASK 0xc0
|
|
#define PX_BRDCFG0_ELBC_SPI_ELBC 0x00
|
|
#define PX_BRDCFG0_ELBC_SPI_NULL 0xc0
|
|
#define PX_BRDCFG0_ELBC_DIU 0x02
|
|
|
|
#define PX_BRDCFG1_DVIEN 0x80
|
|
#define PX_BRDCFG1_DFPEN 0x40
|
|
#define PX_BRDCFG1_BACKLIGHT 0x20
|
|
#define PX_BRDCFG1_DDCEN 0x10
|
|
|
|
#define PX_CTL_ALTACC 0x80
|
|
|
|
/*
|
|
* DIU Area Descriptor
|
|
*
|
|
* Note that we need to byte-swap the value before it's written to the AD
|
|
* register. So even though the registers don't look like they're in the same
|
|
* bit positions as they are on the MPC8610, the same value is written to the
|
|
* AD register on the MPC8610 and on the P1022.
|
|
*/
|
|
#define AD_BYTE_F 0x10000000
|
|
#define AD_ALPHA_C_MASK 0x0E000000
|
|
#define AD_ALPHA_C_SHIFT 25
|
|
#define AD_BLUE_C_MASK 0x01800000
|
|
#define AD_BLUE_C_SHIFT 23
|
|
#define AD_GREEN_C_MASK 0x00600000
|
|
#define AD_GREEN_C_SHIFT 21
|
|
#define AD_RED_C_MASK 0x00180000
|
|
#define AD_RED_C_SHIFT 19
|
|
#define AD_PALETTE 0x00040000
|
|
#define AD_PIXEL_S_MASK 0x00030000
|
|
#define AD_PIXEL_S_SHIFT 16
|
|
#define AD_COMP_3_MASK 0x0000F000
|
|
#define AD_COMP_3_SHIFT 12
|
|
#define AD_COMP_2_MASK 0x00000F00
|
|
#define AD_COMP_2_SHIFT 8
|
|
#define AD_COMP_1_MASK 0x000000F0
|
|
#define AD_COMP_1_SHIFT 4
|
|
#define AD_COMP_0_MASK 0x0000000F
|
|
#define AD_COMP_0_SHIFT 0
|
|
|
|
#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \
|
|
cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \
|
|
(blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \
|
|
(red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \
|
|
(c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
|
|
(c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
|
|
|
|
struct fsl_law {
|
|
u32 lawbar;
|
|
u32 reserved1;
|
|
u32 lawar;
|
|
u32 reserved[5];
|
|
};
|
|
|
|
#define LAWBAR_MASK 0x00F00000
|
|
#define LAWBAR_SHIFT 12
|
|
|
|
#define LAWAR_EN 0x80000000
|
|
#define LAWAR_TGT_MASK 0x01F00000
|
|
#define LAW_TRGT_IF_LBC (0x04 << 20)
|
|
|
|
#define LAWAR_MASK (LAWAR_EN | LAWAR_TGT_MASK)
|
|
#define LAWAR_MATCH (LAWAR_EN | LAW_TRGT_IF_LBC)
|
|
|
|
#define BR_BA 0xFFFF8000
|
|
|
|
/*
|
|
* Map a BRx value to a physical address
|
|
*
|
|
* The localbus BRx registers only store the lower 32 bits of the address. To
|
|
* obtain the upper four bits, we need to scan the LAW table. The entry which
|
|
* maps to the localbus will contain the upper four bits.
|
|
*/
|
|
static phys_addr_t lbc_br_to_phys(const void *ecm, unsigned int count, u32 br)
|
|
{
|
|
#ifndef CONFIG_PHYS_64BIT
|
|
/*
|
|
* If we only have 32-bit addressing, then the BRx address *is* the
|
|
* physical address.
|
|
*/
|
|
return br & BR_BA;
|
|
#else
|
|
const struct fsl_law *law = ecm + 0xc08;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
u64 lawbar = in_be32(&law[i].lawbar);
|
|
u32 lawar = in_be32(&law[i].lawar);
|
|
|
|
if ((lawar & LAWAR_MASK) == LAWAR_MATCH)
|
|
/* Extract the upper four bits */
|
|
return (br & BR_BA) | ((lawbar & LAWBAR_MASK) << 12);
|
|
}
|
|
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* p1022ds_set_monitor_port: switch the output to a different monitor port
|
|
*/
|
|
static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port)
|
|
{
|
|
struct device_node *guts_node;
|
|
struct device_node *lbc_node = NULL;
|
|
struct device_node *law_node = NULL;
|
|
struct ccsr_guts __iomem *guts;
|
|
struct fsl_lbc_regs *lbc = NULL;
|
|
void *ecm = NULL;
|
|
u8 __iomem *lbc_lcs0_ba = NULL;
|
|
u8 __iomem *lbc_lcs1_ba = NULL;
|
|
phys_addr_t cs0_addr, cs1_addr;
|
|
u32 br0, or0, br1, or1;
|
|
const __be32 *iprop;
|
|
unsigned int num_laws;
|
|
u8 b;
|
|
|
|
/* Map the global utilities registers. */
|
|
guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
|
|
if (!guts_node) {
|
|
pr_err("p1022ds: missing global utilities device node\n");
|
|
return;
|
|
}
|
|
|
|
guts = of_iomap(guts_node, 0);
|
|
if (!guts) {
|
|
pr_err("p1022ds: could not map global utilities device\n");
|
|
goto exit;
|
|
}
|
|
|
|
lbc_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
|
|
if (!lbc_node) {
|
|
pr_err("p1022ds: missing localbus node\n");
|
|
goto exit;
|
|
}
|
|
|
|
lbc = of_iomap(lbc_node, 0);
|
|
if (!lbc) {
|
|
pr_err("p1022ds: could not map localbus node\n");
|
|
goto exit;
|
|
}
|
|
|
|
law_node = of_find_compatible_node(NULL, NULL, "fsl,ecm-law");
|
|
if (!law_node) {
|
|
pr_err("p1022ds: missing local access window node\n");
|
|
goto exit;
|
|
}
|
|
|
|
ecm = of_iomap(law_node, 0);
|
|
if (!ecm) {
|
|
pr_err("p1022ds: could not map local access window node\n");
|
|
goto exit;
|
|
}
|
|
|
|
iprop = of_get_property(law_node, "fsl,num-laws", NULL);
|
|
if (!iprop) {
|
|
pr_err("p1022ds: LAW node is missing fsl,num-laws property\n");
|
|
goto exit;
|
|
}
|
|
num_laws = be32_to_cpup(iprop);
|
|
|
|
/*
|
|
* Indirect mode requires both BR0 and BR1 to be set to "GPCM",
|
|
* otherwise writes to these addresses won't actually appear on the
|
|
* local bus, and so the PIXIS won't see them.
|
|
*
|
|
* In FCM mode, writes go to the NAND controller, which does not pass
|
|
* them to the localbus directly. So we force BR0 and BR1 into GPCM
|
|
* mode, since we don't care about what's behind the localbus any
|
|
* more.
|
|
*/
|
|
br0 = in_be32(&lbc->bank[0].br);
|
|
br1 = in_be32(&lbc->bank[1].br);
|
|
or0 = in_be32(&lbc->bank[0].or);
|
|
or1 = in_be32(&lbc->bank[1].or);
|
|
|
|
/* Make sure CS0 and CS1 are programmed */
|
|
if (!(br0 & BR_V) || !(br1 & BR_V)) {
|
|
pr_err("p1022ds: CS0 and/or CS1 is not programmed\n");
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* Use the existing BRx/ORx values if it's already GPCM. Otherwise,
|
|
* force the values to simple 32KB GPCM windows with the most
|
|
* conservative timing.
|
|
*/
|
|
if ((br0 & BR_MSEL) != BR_MS_GPCM) {
|
|
br0 = (br0 & BR_BA) | BR_V;
|
|
or0 = 0xFFFF8000 | 0xFF7;
|
|
out_be32(&lbc->bank[0].br, br0);
|
|
out_be32(&lbc->bank[0].or, or0);
|
|
}
|
|
if ((br1 & BR_MSEL) != BR_MS_GPCM) {
|
|
br1 = (br1 & BR_BA) | BR_V;
|
|
or1 = 0xFFFF8000 | 0xFF7;
|
|
out_be32(&lbc->bank[1].br, br1);
|
|
out_be32(&lbc->bank[1].or, or1);
|
|
}
|
|
|
|
cs0_addr = lbc_br_to_phys(ecm, num_laws, br0);
|
|
if (!cs0_addr) {
|
|
pr_err("p1022ds: could not determine physical address for CS0"
|
|
" (BR0=%08x)\n", br0);
|
|
goto exit;
|
|
}
|
|
cs1_addr = lbc_br_to_phys(ecm, num_laws, br1);
|
|
if (!cs1_addr) {
|
|
pr_err("p1022ds: could not determine physical address for CS1"
|
|
" (BR1=%08x)\n", br1);
|
|
goto exit;
|
|
}
|
|
|
|
lbc_lcs0_ba = ioremap(cs0_addr, 1);
|
|
if (!lbc_lcs0_ba) {
|
|
pr_err("p1022ds: could not ioremap CS0 address %llx\n",
|
|
(unsigned long long)cs0_addr);
|
|
goto exit;
|
|
}
|
|
lbc_lcs1_ba = ioremap(cs1_addr, 1);
|
|
if (!lbc_lcs1_ba) {
|
|
pr_err("p1022ds: could not ioremap CS1 address %llx\n",
|
|
(unsigned long long)cs1_addr);
|
|
goto exit;
|
|
}
|
|
|
|
/* Make sure we're in indirect mode first. */
|
|
if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) !=
|
|
PMUXCR_ELBCDIU_DIU) {
|
|
struct device_node *pixis_node;
|
|
void __iomem *pixis;
|
|
|
|
pixis_node =
|
|
of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga");
|
|
if (!pixis_node) {
|
|
pr_err("p1022ds: missing pixis node\n");
|
|
goto exit;
|
|
}
|
|
|
|
pixis = of_iomap(pixis_node, 0);
|
|
of_node_put(pixis_node);
|
|
if (!pixis) {
|
|
pr_err("p1022ds: could not map pixis registers\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* Enable indirect PIXIS mode. */
|
|
setbits8(pixis + PX_CTL, PX_CTL_ALTACC);
|
|
iounmap(pixis);
|
|
|
|
/* Switch the board mux to the DIU */
|
|
out_8(lbc_lcs0_ba, PX_BRDCFG0); /* BRDCFG0 */
|
|
b = in_8(lbc_lcs1_ba);
|
|
b |= PX_BRDCFG0_ELBC_DIU;
|
|
out_8(lbc_lcs1_ba, b);
|
|
|
|
/* Set the chip mux to DIU mode. */
|
|
clrsetbits_be32(&guts->pmuxcr, PMUXCR_ELBCDIU_MASK,
|
|
PMUXCR_ELBCDIU_DIU);
|
|
in_be32(&guts->pmuxcr);
|
|
}
|
|
|
|
|
|
switch (port) {
|
|
case FSL_DIU_PORT_DVI:
|
|
/* Enable the DVI port, disable the DFP and the backlight */
|
|
out_8(lbc_lcs0_ba, PX_BRDCFG1);
|
|
b = in_8(lbc_lcs1_ba);
|
|
b &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT);
|
|
b |= PX_BRDCFG1_DVIEN;
|
|
out_8(lbc_lcs1_ba, b);
|
|
break;
|
|
case FSL_DIU_PORT_LVDS:
|
|
/*
|
|
* LVDS also needs backlight enabled, otherwise the display
|
|
* will be blank.
|
|
*/
|
|
/* Enable the DFP port, disable the DVI and the backlight */
|
|
out_8(lbc_lcs0_ba, PX_BRDCFG1);
|
|
b = in_8(lbc_lcs1_ba);
|
|
b &= ~PX_BRDCFG1_DVIEN;
|
|
b |= PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT;
|
|
out_8(lbc_lcs1_ba, b);
|
|
break;
|
|
default:
|
|
pr_err("p1022ds: unsupported monitor port %i\n", port);
|
|
}
|
|
|
|
exit:
|
|
if (lbc_lcs1_ba)
|
|
iounmap(lbc_lcs1_ba);
|
|
if (lbc_lcs0_ba)
|
|
iounmap(lbc_lcs0_ba);
|
|
if (lbc)
|
|
iounmap(lbc);
|
|
if (ecm)
|
|
iounmap(ecm);
|
|
if (guts)
|
|
iounmap(guts);
|
|
|
|
of_node_put(law_node);
|
|
of_node_put(lbc_node);
|
|
of_node_put(guts_node);
|
|
}
|
|
|
|
/**
|
|
* p1022ds_set_pixel_clock: program the DIU's clock
|
|
*
|
|
* @pixclock: the wavelength, in picoseconds, of the clock
|
|
*/
|
|
void p1022ds_set_pixel_clock(unsigned int pixclock)
|
|
{
|
|
struct device_node *guts_np = NULL;
|
|
struct ccsr_guts __iomem *guts;
|
|
unsigned long freq;
|
|
u64 temp;
|
|
u32 pxclk;
|
|
|
|
/* Map the global utilities registers. */
|
|
guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts");
|
|
if (!guts_np) {
|
|
pr_err("p1022ds: missing global utilities device node\n");
|
|
return;
|
|
}
|
|
|
|
guts = of_iomap(guts_np, 0);
|
|
of_node_put(guts_np);
|
|
if (!guts) {
|
|
pr_err("p1022ds: could not map global utilities device\n");
|
|
return;
|
|
}
|
|
|
|
/* Convert pixclock from a wavelength to a frequency */
|
|
temp = 1000000000000ULL;
|
|
do_div(temp, pixclock);
|
|
freq = temp;
|
|
|
|
/*
|
|
* 'pxclk' is the ratio of the platform clock to the pixel clock.
|
|
* This number is programmed into the CLKDVDR register, and the valid
|
|
* range of values is 2-255.
|
|
*/
|
|
pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq);
|
|
pxclk = clamp_t(u32, pxclk, 2, 255);
|
|
|
|
/* Disable the pixel clock, and set it to non-inverted and no delay */
|
|
clrbits32(&guts->clkdvdr,
|
|
CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK);
|
|
|
|
/* Enable the clock and set the pxclk */
|
|
setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
|
|
|
|
iounmap(guts);
|
|
}
|
|
|
|
/**
|
|
* p1022ds_valid_monitor_port: set the monitor port for sysfs
|
|
*/
|
|
enum fsl_diu_monitor_port
|
|
p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port)
|
|
{
|
|
switch (port) {
|
|
case FSL_DIU_PORT_DVI:
|
|
case FSL_DIU_PORT_LVDS:
|
|
return port;
|
|
default:
|
|
return FSL_DIU_PORT_DVI; /* Dual-link LVDS is not supported */
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
void __init p1022_ds_pic_init(void)
|
|
{
|
|
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
|
|
MPIC_SINGLE_DEST_CPU,
|
|
0, 256, " OpenPIC ");
|
|
BUG_ON(mpic == NULL);
|
|
mpic_init(mpic);
|
|
}
|
|
|
|
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
|
|
|
|
/* TRUE if there is a "video=fslfb" command-line parameter. */
|
|
static bool fslfb;
|
|
|
|
/*
|
|
* Search for a "video=fslfb" command-line parameter, and set 'fslfb' to
|
|
* true if we find it.
|
|
*
|
|
* We need to use early_param() instead of __setup() because the normal
|
|
* __setup() gets called to late. However, early_param() gets called very
|
|
* early, before the device tree is unflattened, so all we can do now is set a
|
|
* global variable. Later on, p1022_ds_setup_arch() will use that variable
|
|
* to determine if we need to update the device tree.
|
|
*/
|
|
static int __init early_video_setup(char *options)
|
|
{
|
|
fslfb = (strncmp(options, "fslfb:", 6) == 0);
|
|
|
|
return 0;
|
|
}
|
|
early_param("video", early_video_setup);
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Setup the architecture
|
|
*/
|
|
static void __init p1022_ds_setup_arch(void)
|
|
{
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("p1022_ds_setup_arch()", 0);
|
|
|
|
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
|
|
diu_ops.set_monitor_port = p1022ds_set_monitor_port;
|
|
diu_ops.set_pixel_clock = p1022ds_set_pixel_clock;
|
|
diu_ops.valid_monitor_port = p1022ds_valid_monitor_port;
|
|
|
|
/*
|
|
* Disable the NOR and NAND flash nodes if there is video=fslfb...
|
|
* command-line parameter. When the DIU is active, the localbus is
|
|
* unavailable, so we have to disable these nodes before the MTD
|
|
* driver loads.
|
|
*/
|
|
if (fslfb) {
|
|
struct device_node *np =
|
|
of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc");
|
|
|
|
if (np) {
|
|
struct device_node *np2;
|
|
|
|
of_node_get(np);
|
|
np2 = of_find_compatible_node(np, NULL, "cfi-flash");
|
|
if (np2) {
|
|
static struct property nor_status = {
|
|
.name = "status",
|
|
.value = "disabled",
|
|
.length = sizeof("disabled"),
|
|
};
|
|
|
|
/*
|
|
* of_update_property() is called before
|
|
* kmalloc() is available, so the 'new' object
|
|
* should be allocated in the global area.
|
|
* The easiest way is to do that is to
|
|
* allocate one static local variable for each
|
|
* call to this function.
|
|
*/
|
|
pr_info("p1022ds: disabling %s node",
|
|
np2->full_name);
|
|
of_update_property(np2, &nor_status);
|
|
of_node_put(np2);
|
|
}
|
|
|
|
of_node_get(np);
|
|
np2 = of_find_compatible_node(np, NULL,
|
|
"fsl,elbc-fcm-nand");
|
|
if (np2) {
|
|
static struct property nand_status = {
|
|
.name = "status",
|
|
.value = "disabled",
|
|
.length = sizeof("disabled"),
|
|
};
|
|
|
|
pr_info("p1022ds: disabling %s node",
|
|
np2->full_name);
|
|
of_update_property(np2, &nand_status);
|
|
of_node_put(np2);
|
|
}
|
|
|
|
of_node_put(np);
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
mpc85xx_smp_init();
|
|
|
|
fsl_pci_assign_primary();
|
|
|
|
swiotlb_detect_4g();
|
|
|
|
pr_info("Freescale P1022 DS reference board\n");
|
|
}
|
|
|
|
machine_arch_initcall(p1022_ds, mpc85xx_common_publish_devices);
|
|
|
|
machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
|
|
|
|
/*
|
|
* Called very early, device-tree isn't unflattened
|
|
*/
|
|
static int __init p1022_ds_probe(void)
|
|
{
|
|
return of_machine_is_compatible("fsl,p1022ds");
|
|
}
|
|
|
|
define_machine(p1022_ds) {
|
|
.name = "P1022 DS",
|
|
.probe = p1022_ds_probe,
|
|
.setup_arch = p1022_ds_setup_arch,
|
|
.init_IRQ = p1022_ds_pic_init,
|
|
#ifdef CONFIG_PCI
|
|
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
|
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
|
|
#endif
|
|
.get_irq = mpic_get_irq,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.progress = udbg_progress,
|
|
};
|