850 lines
22 KiB
C
850 lines
22 KiB
C
/*
|
|
* Copyright (C) 2012 Texas Instruments
|
|
* Author: Rob Clark <robdclark@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <drm/drm_atomic.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_flip_work.h>
|
|
#include <drm/drm_plane_helper.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include "tilcdc_drv.h"
|
|
#include "tilcdc_regs.h"
|
|
|
|
#define TILCDC_VBLANK_SAFETY_THRESHOLD_US 1000
|
|
|
|
struct tilcdc_crtc {
|
|
struct drm_crtc base;
|
|
|
|
struct drm_plane primary;
|
|
const struct tilcdc_panel_info *info;
|
|
struct drm_pending_vblank_event *event;
|
|
bool enabled;
|
|
wait_queue_head_t frame_done_wq;
|
|
bool frame_done;
|
|
spinlock_t irq_lock;
|
|
|
|
unsigned int lcd_fck_rate;
|
|
|
|
ktime_t last_vblank;
|
|
|
|
struct drm_framebuffer *curr_fb;
|
|
struct drm_framebuffer *next_fb;
|
|
|
|
/* for deferred fb unref's: */
|
|
struct drm_flip_work unref_work;
|
|
|
|
/* Only set if an external encoder is connected */
|
|
bool simulate_vesa_sync;
|
|
|
|
int sync_lost_count;
|
|
bool frame_intact;
|
|
};
|
|
#define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base)
|
|
|
|
static void unref_worker(struct drm_flip_work *work, void *val)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc =
|
|
container_of(work, struct tilcdc_crtc, unref_work);
|
|
struct drm_device *dev = tilcdc_crtc->base.dev;
|
|
|
|
mutex_lock(&dev->mode_config.mutex);
|
|
drm_framebuffer_unreference(val);
|
|
mutex_unlock(&dev->mode_config.mutex);
|
|
}
|
|
|
|
static void set_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct drm_gem_cma_object *gem;
|
|
unsigned int depth, bpp;
|
|
dma_addr_t start, end;
|
|
u64 dma_base_and_ceiling;
|
|
|
|
drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
|
|
gem = drm_fb_cma_get_gem_obj(fb, 0);
|
|
|
|
start = gem->paddr + fb->offsets[0] +
|
|
crtc->y * fb->pitches[0] +
|
|
crtc->x * bpp / 8;
|
|
|
|
end = start + (crtc->mode.vdisplay * fb->pitches[0]);
|
|
|
|
/* Write LCDC_DMA_FB_BASE_ADDR_0_REG and LCDC_DMA_FB_CEILING_ADDR_0_REG
|
|
* with a single insruction, if available. This should make it more
|
|
* unlikely that LCDC would fetch the DMA addresses in the middle of
|
|
* an update.
|
|
*/
|
|
dma_base_and_ceiling = (u64)(end - 1) << 32 | start;
|
|
tilcdc_write64(dev, LCDC_DMA_FB_BASE_ADDR_0_REG, dma_base_and_ceiling);
|
|
|
|
if (tilcdc_crtc->curr_fb)
|
|
drm_flip_work_queue(&tilcdc_crtc->unref_work,
|
|
tilcdc_crtc->curr_fb);
|
|
|
|
tilcdc_crtc->curr_fb = fb;
|
|
}
|
|
|
|
static void tilcdc_crtc_enable_irqs(struct drm_device *dev)
|
|
{
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
|
|
tilcdc_clear_irqstatus(dev, 0xffffffff);
|
|
|
|
if (priv->rev == 1) {
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG,
|
|
LCDC_V1_UNDERFLOW_INT_ENA);
|
|
tilcdc_set(dev, LCDC_DMA_CTRL_REG,
|
|
LCDC_V1_END_OF_FRAME_INT_ENA);
|
|
} else {
|
|
tilcdc_write(dev, LCDC_INT_ENABLE_SET_REG,
|
|
LCDC_V2_UNDERFLOW_INT_ENA |
|
|
LCDC_V2_END_OF_FRAME0_INT_ENA |
|
|
LCDC_FRAME_DONE | LCDC_SYNC_LOST);
|
|
}
|
|
}
|
|
|
|
static void tilcdc_crtc_disable_irqs(struct drm_device *dev)
|
|
{
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
|
|
/* disable irqs that we might have enabled: */
|
|
if (priv->rev == 1) {
|
|
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG,
|
|
LCDC_V1_UNDERFLOW_INT_ENA | LCDC_V1_PL_INT_ENA);
|
|
tilcdc_clear(dev, LCDC_DMA_CTRL_REG,
|
|
LCDC_V1_END_OF_FRAME_INT_ENA);
|
|
} else {
|
|
tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
|
|
LCDC_V2_UNDERFLOW_INT_ENA | LCDC_V2_PL_INT_ENA |
|
|
LCDC_V2_END_OF_FRAME0_INT_ENA |
|
|
LCDC_FRAME_DONE | LCDC_SYNC_LOST);
|
|
}
|
|
}
|
|
|
|
static void reset(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
|
|
if (priv->rev != 2)
|
|
return;
|
|
|
|
tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
|
|
usleep_range(250, 1000);
|
|
tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET);
|
|
}
|
|
|
|
static void tilcdc_crtc_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
|
|
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
|
|
|
|
if (tilcdc_crtc->enabled)
|
|
return;
|
|
|
|
pm_runtime_get_sync(dev->dev);
|
|
|
|
reset(crtc);
|
|
|
|
tilcdc_crtc_enable_irqs(dev);
|
|
|
|
tilcdc_clear(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE);
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY));
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
|
|
|
|
drm_crtc_vblank_on(crtc);
|
|
|
|
tilcdc_crtc->enabled = true;
|
|
}
|
|
|
|
void tilcdc_crtc_disable(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
|
|
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
|
|
|
|
if (!tilcdc_crtc->enabled)
|
|
return;
|
|
|
|
tilcdc_crtc->frame_done = false;
|
|
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
|
|
|
|
/*
|
|
* if necessary wait for framedone irq which will still come
|
|
* before putting things to sleep..
|
|
*/
|
|
if (priv->rev == 2) {
|
|
int ret = wait_event_timeout(tilcdc_crtc->frame_done_wq,
|
|
tilcdc_crtc->frame_done,
|
|
msecs_to_jiffies(500));
|
|
if (ret == 0)
|
|
dev_err(dev->dev, "%s: timeout waiting for framedone\n",
|
|
__func__);
|
|
}
|
|
|
|
drm_crtc_vblank_off(crtc);
|
|
|
|
tilcdc_crtc_disable_irqs(dev);
|
|
|
|
pm_runtime_put_sync(dev->dev);
|
|
|
|
if (tilcdc_crtc->next_fb) {
|
|
drm_flip_work_queue(&tilcdc_crtc->unref_work,
|
|
tilcdc_crtc->next_fb);
|
|
tilcdc_crtc->next_fb = NULL;
|
|
}
|
|
|
|
if (tilcdc_crtc->curr_fb) {
|
|
drm_flip_work_queue(&tilcdc_crtc->unref_work,
|
|
tilcdc_crtc->curr_fb);
|
|
tilcdc_crtc->curr_fb = NULL;
|
|
}
|
|
|
|
drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
|
|
tilcdc_crtc->last_vblank = ktime_set(0, 0);
|
|
|
|
tilcdc_crtc->enabled = false;
|
|
}
|
|
|
|
static bool tilcdc_crtc_is_on(struct drm_crtc *crtc)
|
|
{
|
|
return crtc->state && crtc->state->enable && crtc->state->active;
|
|
}
|
|
|
|
static void tilcdc_crtc_destroy(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct tilcdc_drm_private *priv = crtc->dev->dev_private;
|
|
|
|
drm_modeset_lock_crtc(crtc, NULL);
|
|
tilcdc_crtc_disable(crtc);
|
|
drm_modeset_unlock_crtc(crtc);
|
|
|
|
flush_workqueue(priv->wq);
|
|
|
|
of_node_put(crtc->port);
|
|
drm_crtc_cleanup(crtc);
|
|
drm_flip_work_cleanup(&tilcdc_crtc->unref_work);
|
|
}
|
|
|
|
int tilcdc_crtc_update_fb(struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_pending_vblank_event *event)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
unsigned long flags;
|
|
|
|
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
|
|
|
|
if (tilcdc_crtc->event) {
|
|
dev_err(dev->dev, "already pending page flip!\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
drm_framebuffer_reference(fb);
|
|
|
|
crtc->primary->fb = fb;
|
|
|
|
spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
|
|
|
|
if (crtc->hwmode.vrefresh && ktime_to_ns(tilcdc_crtc->last_vblank)) {
|
|
ktime_t next_vblank;
|
|
s64 tdiff;
|
|
|
|
next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
|
|
1000000 / crtc->hwmode.vrefresh);
|
|
|
|
tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get()));
|
|
|
|
if (tdiff < TILCDC_VBLANK_SAFETY_THRESHOLD_US)
|
|
tilcdc_crtc->next_fb = fb;
|
|
}
|
|
|
|
if (tilcdc_crtc->next_fb != fb)
|
|
set_scanout(crtc, fb);
|
|
|
|
tilcdc_crtc->event = event;
|
|
|
|
spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc,
|
|
const struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
|
|
if (!tilcdc_crtc->simulate_vesa_sync)
|
|
return true;
|
|
|
|
/*
|
|
* tilcdc does not generate VESA-compliant sync but aligns
|
|
* VS on the second edge of HS instead of first edge.
|
|
* We use adjusted_mode, to fixup sync by aligning both rising
|
|
* edges and add HSKEW offset to fix the sync.
|
|
*/
|
|
adjusted_mode->hskew = mode->hsync_end - mode->hsync_start;
|
|
adjusted_mode->flags |= DRM_MODE_FLAG_HSKEW;
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_NHSYNC) {
|
|
adjusted_mode->flags |= DRM_MODE_FLAG_PHSYNC;
|
|
adjusted_mode->flags &= ~DRM_MODE_FLAG_NHSYNC;
|
|
} else {
|
|
adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
|
|
adjusted_mode->flags &= ~DRM_MODE_FLAG_PHSYNC;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static void tilcdc_crtc_set_clk(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
const unsigned clkdiv = 2; /* using a fixed divider of 2 */
|
|
int ret;
|
|
|
|
/* mode.clock is in KHz, set_rate wants parameter in Hz */
|
|
ret = clk_set_rate(priv->clk, crtc->mode.clock * 1000 * clkdiv);
|
|
if (ret < 0) {
|
|
dev_err(dev->dev, "failed to set display clock rate to: %d\n",
|
|
crtc->mode.clock);
|
|
return;
|
|
}
|
|
|
|
tilcdc_crtc->lcd_fck_rate = clk_get_rate(priv->clk);
|
|
|
|
DBG("lcd_clk=%u, mode clock=%d, div=%u",
|
|
tilcdc_crtc->lcd_fck_rate, crtc->mode.clock, clkdiv);
|
|
|
|
/* Configure the LCD clock divisor. */
|
|
tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(clkdiv) |
|
|
LCDC_RASTER_MODE);
|
|
|
|
if (priv->rev == 2)
|
|
tilcdc_set(dev, LCDC_CLK_ENABLE_REG,
|
|
LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN |
|
|
LCDC_V2_CORE_CLK_EN);
|
|
}
|
|
|
|
static void tilcdc_crtc_mode_set_nofb(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
const struct tilcdc_panel_info *info = tilcdc_crtc->info;
|
|
uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw;
|
|
struct drm_display_mode *mode = &crtc->state->adjusted_mode;
|
|
struct drm_framebuffer *fb = crtc->primary->state->fb;
|
|
|
|
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
|
|
|
|
if (WARN_ON(!info))
|
|
return;
|
|
|
|
if (WARN_ON(!fb))
|
|
return;
|
|
|
|
/* Configure the Burst Size and fifo threshold of DMA: */
|
|
reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770;
|
|
switch (info->dma_burst_sz) {
|
|
case 1:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1);
|
|
break;
|
|
case 2:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2);
|
|
break;
|
|
case 4:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4);
|
|
break;
|
|
case 8:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8);
|
|
break;
|
|
case 16:
|
|
reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16);
|
|
break;
|
|
default:
|
|
dev_err(dev->dev, "invalid burst size\n");
|
|
return;
|
|
}
|
|
reg |= (info->fifo_th << 8);
|
|
tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg);
|
|
|
|
/* Configure timings: */
|
|
hbp = mode->htotal - mode->hsync_end;
|
|
hfp = mode->hsync_start - mode->hdisplay;
|
|
hsw = mode->hsync_end - mode->hsync_start;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vsw = mode->vsync_end - mode->vsync_start;
|
|
|
|
DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u",
|
|
mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw);
|
|
|
|
/* Set AC Bias Period and Number of Transitions per Interrupt: */
|
|
reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00;
|
|
reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) |
|
|
LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt);
|
|
|
|
/*
|
|
* subtract one from hfp, hbp, hsw because the hardware uses
|
|
* a value of 0 as 1
|
|
*/
|
|
if (priv->rev == 2) {
|
|
/* clear bits we're going to set */
|
|
reg &= ~0x78000033;
|
|
reg |= ((hfp-1) & 0x300) >> 8;
|
|
reg |= ((hbp-1) & 0x300) >> 4;
|
|
reg |= ((hsw-1) & 0x3c0) << 21;
|
|
}
|
|
tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg);
|
|
|
|
reg = (((mode->hdisplay >> 4) - 1) << 4) |
|
|
(((hbp-1) & 0xff) << 24) |
|
|
(((hfp-1) & 0xff) << 16) |
|
|
(((hsw-1) & 0x3f) << 10);
|
|
if (priv->rev == 2)
|
|
reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3;
|
|
tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg);
|
|
|
|
reg = ((mode->vdisplay - 1) & 0x3ff) |
|
|
((vbp & 0xff) << 24) |
|
|
((vfp & 0xff) << 16) |
|
|
(((vsw-1) & 0x3f) << 10);
|
|
tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg);
|
|
|
|
/*
|
|
* be sure to set Bit 10 for the V2 LCDC controller,
|
|
* otherwise limited to 1024 pixels width, stopping
|
|
* 1920x1080 being supported.
|
|
*/
|
|
if (priv->rev == 2) {
|
|
if ((mode->vdisplay - 1) & 0x400) {
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG,
|
|
LCDC_LPP_B10);
|
|
} else {
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG,
|
|
LCDC_LPP_B10);
|
|
}
|
|
}
|
|
|
|
/* Configure display type: */
|
|
reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) &
|
|
~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE |
|
|
LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK |
|
|
0x000ff000 /* Palette Loading Delay bits */);
|
|
reg |= LCDC_TFT_MODE; /* no monochrome/passive support */
|
|
if (info->tft_alt_mode)
|
|
reg |= LCDC_TFT_ALT_ENABLE;
|
|
if (priv->rev == 2) {
|
|
unsigned int depth, bpp;
|
|
|
|
drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp);
|
|
switch (bpp) {
|
|
case 16:
|
|
break;
|
|
case 32:
|
|
reg |= LCDC_V2_TFT_24BPP_UNPACK;
|
|
/* fallthrough */
|
|
case 24:
|
|
reg |= LCDC_V2_TFT_24BPP_MODE;
|
|
break;
|
|
default:
|
|
dev_err(dev->dev, "invalid pixel format\n");
|
|
return;
|
|
}
|
|
}
|
|
reg |= info->fdd < 12;
|
|
tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg);
|
|
|
|
if (info->invert_pxl_clk)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK);
|
|
|
|
if (info->sync_ctrl)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL);
|
|
|
|
if (info->sync_edge)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
|
|
|
|
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
|
|
tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC);
|
|
|
|
if (info->raster_order)
|
|
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
|
|
else
|
|
tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER);
|
|
|
|
drm_framebuffer_reference(fb);
|
|
|
|
set_scanout(crtc, fb);
|
|
|
|
tilcdc_crtc_set_clk(crtc);
|
|
|
|
crtc->hwmode = crtc->state->adjusted_mode;
|
|
}
|
|
|
|
static int tilcdc_crtc_atomic_check(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *state)
|
|
{
|
|
struct drm_display_mode *mode = &state->mode;
|
|
int ret;
|
|
|
|
/* If we are not active we don't care */
|
|
if (!state->active)
|
|
return 0;
|
|
|
|
if (state->state->planes[0].ptr != crtc->primary ||
|
|
state->state->planes[0].state == NULL ||
|
|
state->state->planes[0].state->crtc != crtc) {
|
|
dev_dbg(crtc->dev->dev, "CRTC primary plane must be present");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = tilcdc_crtc_mode_valid(crtc, mode);
|
|
if (ret) {
|
|
dev_dbg(crtc->dev->dev, "Mode \"%s\" not valid", mode->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_crtc_funcs tilcdc_crtc_funcs = {
|
|
.destroy = tilcdc_crtc_destroy,
|
|
.set_config = drm_atomic_helper_set_config,
|
|
.page_flip = drm_atomic_helper_page_flip,
|
|
.reset = drm_atomic_helper_crtc_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
|
|
};
|
|
|
|
static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = {
|
|
.mode_fixup = tilcdc_crtc_mode_fixup,
|
|
.enable = tilcdc_crtc_enable,
|
|
.disable = tilcdc_crtc_disable,
|
|
.atomic_check = tilcdc_crtc_atomic_check,
|
|
.mode_set_nofb = tilcdc_crtc_mode_set_nofb,
|
|
};
|
|
|
|
int tilcdc_crtc_max_width(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
int max_width = 0;
|
|
|
|
if (priv->rev == 1)
|
|
max_width = 1024;
|
|
else if (priv->rev == 2)
|
|
max_width = 2048;
|
|
|
|
return max_width;
|
|
}
|
|
|
|
int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode)
|
|
{
|
|
struct tilcdc_drm_private *priv = crtc->dev->dev_private;
|
|
unsigned int bandwidth;
|
|
uint32_t hbp, hfp, hsw, vbp, vfp, vsw;
|
|
|
|
/*
|
|
* check to see if the width is within the range that
|
|
* the LCD Controller physically supports
|
|
*/
|
|
if (mode->hdisplay > tilcdc_crtc_max_width(crtc))
|
|
return MODE_VIRTUAL_X;
|
|
|
|
/* width must be multiple of 16 */
|
|
if (mode->hdisplay & 0xf)
|
|
return MODE_VIRTUAL_X;
|
|
|
|
if (mode->vdisplay > 2048)
|
|
return MODE_VIRTUAL_Y;
|
|
|
|
DBG("Processing mode %dx%d@%d with pixel clock %d",
|
|
mode->hdisplay, mode->vdisplay,
|
|
drm_mode_vrefresh(mode), mode->clock);
|
|
|
|
hbp = mode->htotal - mode->hsync_end;
|
|
hfp = mode->hsync_start - mode->hdisplay;
|
|
hsw = mode->hsync_end - mode->hsync_start;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vsw = mode->vsync_end - mode->vsync_start;
|
|
|
|
if ((hbp-1) & ~0x3ff) {
|
|
DBG("Pruning mode: Horizontal Back Porch out of range");
|
|
return MODE_HBLANK_WIDE;
|
|
}
|
|
|
|
if ((hfp-1) & ~0x3ff) {
|
|
DBG("Pruning mode: Horizontal Front Porch out of range");
|
|
return MODE_HBLANK_WIDE;
|
|
}
|
|
|
|
if ((hsw-1) & ~0x3ff) {
|
|
DBG("Pruning mode: Horizontal Sync Width out of range");
|
|
return MODE_HSYNC_WIDE;
|
|
}
|
|
|
|
if (vbp & ~0xff) {
|
|
DBG("Pruning mode: Vertical Back Porch out of range");
|
|
return MODE_VBLANK_WIDE;
|
|
}
|
|
|
|
if (vfp & ~0xff) {
|
|
DBG("Pruning mode: Vertical Front Porch out of range");
|
|
return MODE_VBLANK_WIDE;
|
|
}
|
|
|
|
if ((vsw-1) & ~0x3f) {
|
|
DBG("Pruning mode: Vertical Sync Width out of range");
|
|
return MODE_VSYNC_WIDE;
|
|
}
|
|
|
|
/*
|
|
* some devices have a maximum allowed pixel clock
|
|
* configured from the DT
|
|
*/
|
|
if (mode->clock > priv->max_pixelclock) {
|
|
DBG("Pruning mode: pixel clock too high");
|
|
return MODE_CLOCK_HIGH;
|
|
}
|
|
|
|
/*
|
|
* some devices further limit the max horizontal resolution
|
|
* configured from the DT
|
|
*/
|
|
if (mode->hdisplay > priv->max_width)
|
|
return MODE_BAD_WIDTH;
|
|
|
|
/* filter out modes that would require too much memory bandwidth: */
|
|
bandwidth = mode->hdisplay * mode->vdisplay *
|
|
drm_mode_vrefresh(mode);
|
|
if (bandwidth > priv->max_bandwidth) {
|
|
DBG("Pruning mode: exceeds defined bandwidth limit");
|
|
return MODE_BAD;
|
|
}
|
|
|
|
return MODE_OK;
|
|
}
|
|
|
|
void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
|
|
const struct tilcdc_panel_info *info)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
tilcdc_crtc->info = info;
|
|
}
|
|
|
|
void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
|
|
bool simulate_vesa_sync)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
|
|
tilcdc_crtc->simulate_vesa_sync = simulate_vesa_sync;
|
|
}
|
|
|
|
void tilcdc_crtc_update_clk(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
|
|
drm_modeset_lock_crtc(crtc, NULL);
|
|
if (tilcdc_crtc->lcd_fck_rate != clk_get_rate(priv->clk)) {
|
|
if (tilcdc_crtc_is_on(crtc)) {
|
|
pm_runtime_get_sync(dev->dev);
|
|
tilcdc_crtc_disable(crtc);
|
|
|
|
tilcdc_crtc_set_clk(crtc);
|
|
|
|
tilcdc_crtc_enable(crtc);
|
|
pm_runtime_put_sync(dev->dev);
|
|
}
|
|
}
|
|
drm_modeset_unlock_crtc(crtc);
|
|
}
|
|
|
|
#define SYNC_LOST_COUNT_LIMIT 50
|
|
|
|
irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc)
|
|
{
|
|
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
|
|
struct drm_device *dev = crtc->dev;
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
uint32_t stat;
|
|
|
|
stat = tilcdc_read_irqstatus(dev);
|
|
tilcdc_clear_irqstatus(dev, stat);
|
|
|
|
if (stat & LCDC_END_OF_FRAME0) {
|
|
unsigned long flags;
|
|
bool skip_event = false;
|
|
ktime_t now;
|
|
|
|
now = ktime_get();
|
|
|
|
drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
|
|
|
|
spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
|
|
|
|
tilcdc_crtc->last_vblank = now;
|
|
|
|
if (tilcdc_crtc->next_fb) {
|
|
set_scanout(crtc, tilcdc_crtc->next_fb);
|
|
tilcdc_crtc->next_fb = NULL;
|
|
skip_event = true;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
|
|
|
|
drm_crtc_handle_vblank(crtc);
|
|
|
|
if (!skip_event) {
|
|
struct drm_pending_vblank_event *event;
|
|
|
|
spin_lock_irqsave(&dev->event_lock, flags);
|
|
|
|
event = tilcdc_crtc->event;
|
|
tilcdc_crtc->event = NULL;
|
|
if (event)
|
|
drm_crtc_send_vblank_event(crtc, event);
|
|
|
|
spin_unlock_irqrestore(&dev->event_lock, flags);
|
|
}
|
|
|
|
if (tilcdc_crtc->frame_intact)
|
|
tilcdc_crtc->sync_lost_count = 0;
|
|
else
|
|
tilcdc_crtc->frame_intact = true;
|
|
}
|
|
|
|
if (stat & LCDC_FIFO_UNDERFLOW)
|
|
dev_err_ratelimited(dev->dev, "%s(0x%08x): FIFO underfow",
|
|
__func__, stat);
|
|
|
|
/* For revision 2 only */
|
|
if (priv->rev == 2) {
|
|
if (stat & LCDC_FRAME_DONE) {
|
|
tilcdc_crtc->frame_done = true;
|
|
wake_up(&tilcdc_crtc->frame_done_wq);
|
|
}
|
|
|
|
if (stat & LCDC_SYNC_LOST) {
|
|
dev_err_ratelimited(dev->dev, "%s(0x%08x): Sync lost",
|
|
__func__, stat);
|
|
tilcdc_crtc->frame_intact = false;
|
|
if (tilcdc_crtc->sync_lost_count++ >
|
|
SYNC_LOST_COUNT_LIMIT) {
|
|
dev_err(dev->dev, "%s(0x%08x): Sync lost flood detected, disabling the interrupt", __func__, stat);
|
|
tilcdc_write(dev, LCDC_INT_ENABLE_CLR_REG,
|
|
LCDC_SYNC_LOST);
|
|
}
|
|
}
|
|
|
|
/* Indicate to LCDC that the interrupt service routine has
|
|
* completed, see 13.3.6.1.6 in AM335x TRM.
|
|
*/
|
|
tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev)
|
|
{
|
|
struct tilcdc_drm_private *priv = dev->dev_private;
|
|
struct tilcdc_crtc *tilcdc_crtc;
|
|
struct drm_crtc *crtc;
|
|
int ret;
|
|
|
|
tilcdc_crtc = devm_kzalloc(dev->dev, sizeof(*tilcdc_crtc), GFP_KERNEL);
|
|
if (!tilcdc_crtc) {
|
|
dev_err(dev->dev, "allocation failed\n");
|
|
return NULL;
|
|
}
|
|
|
|
crtc = &tilcdc_crtc->base;
|
|
|
|
ret = tilcdc_plane_init(dev, &tilcdc_crtc->primary);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
init_waitqueue_head(&tilcdc_crtc->frame_done_wq);
|
|
|
|
drm_flip_work_init(&tilcdc_crtc->unref_work,
|
|
"unref", unref_worker);
|
|
|
|
spin_lock_init(&tilcdc_crtc->irq_lock);
|
|
|
|
ret = drm_crtc_init_with_planes(dev, crtc,
|
|
&tilcdc_crtc->primary,
|
|
NULL,
|
|
&tilcdc_crtc_funcs,
|
|
"tilcdc crtc");
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs);
|
|
|
|
if (priv->is_componentized) {
|
|
struct device_node *ports =
|
|
of_get_child_by_name(dev->dev->of_node, "ports");
|
|
|
|
if (ports) {
|
|
crtc->port = of_get_child_by_name(ports, "port");
|
|
of_node_put(ports);
|
|
} else {
|
|
crtc->port =
|
|
of_get_child_by_name(dev->dev->of_node, "port");
|
|
}
|
|
if (!crtc->port) { /* This should never happen */
|
|
dev_err(dev->dev, "Port node not found in %s\n",
|
|
dev->dev->of_node->full_name);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return crtc;
|
|
|
|
fail:
|
|
tilcdc_crtc_destroy(crtc);
|
|
return NULL;
|
|
}
|