323 lines
7.8 KiB
C
323 lines
7.8 KiB
C
/*
|
|
* drivers/mtd/nand/gpio.c
|
|
*
|
|
* Updated, and converted to generic GPIO based driver by Russell King.
|
|
*
|
|
* Written by Ben Dooks <ben@simtec.co.uk>
|
|
* Based on 2.4 version by Mark Whittaker
|
|
*
|
|
* © 2004 Simtec Electronics
|
|
*
|
|
* Device driver for NAND flash that uses a memory mapped interface to
|
|
* read/write the NAND commands and data, and GPIO pins for control signals
|
|
* (the DT binding refers to this as "GPIO assisted NAND flash")
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/nand-gpio.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
struct gpiomtd {
|
|
void __iomem *io_sync;
|
|
struct nand_chip nand_chip;
|
|
struct gpio_nand_platdata plat;
|
|
};
|
|
|
|
static inline struct gpiomtd *gpio_nand_getpriv(struct mtd_info *mtd)
|
|
{
|
|
return container_of(mtd_to_nand(mtd), struct gpiomtd, nand_chip);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_ARM
|
|
/* gpio_nand_dosync()
|
|
*
|
|
* Make sure the GPIO state changes occur in-order with writes to NAND
|
|
* memory region.
|
|
* Needed on PXA due to bus-reordering within the SoC itself (see section on
|
|
* I/O ordering in PXA manual (section 2.3, p35)
|
|
*/
|
|
static void gpio_nand_dosync(struct gpiomtd *gpiomtd)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
if (gpiomtd->io_sync) {
|
|
/*
|
|
* Linux memory barriers don't cater for what's required here.
|
|
* What's required is what's here - a read from a separate
|
|
* region with a dependency on that read.
|
|
*/
|
|
tmp = readl(gpiomtd->io_sync);
|
|
asm volatile("mov %1, %0\n" : "=r" (tmp) : "r" (tmp));
|
|
}
|
|
}
|
|
#else
|
|
static inline void gpio_nand_dosync(struct gpiomtd *gpiomtd) {}
|
|
#endif
|
|
|
|
static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
|
|
{
|
|
struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
|
|
|
|
gpio_nand_dosync(gpiomtd);
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
gpio_set_value(gpiomtd->plat.gpio_nce, !(ctrl & NAND_NCE));
|
|
gpio_set_value(gpiomtd->plat.gpio_cle, !!(ctrl & NAND_CLE));
|
|
gpio_set_value(gpiomtd->plat.gpio_ale, !!(ctrl & NAND_ALE));
|
|
gpio_nand_dosync(gpiomtd);
|
|
}
|
|
if (cmd == NAND_CMD_NONE)
|
|
return;
|
|
|
|
writeb(cmd, gpiomtd->nand_chip.IO_ADDR_W);
|
|
gpio_nand_dosync(gpiomtd);
|
|
}
|
|
|
|
static int gpio_nand_devready(struct mtd_info *mtd)
|
|
{
|
|
struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
|
|
|
|
return gpio_get_value(gpiomtd->plat.gpio_rdy);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id gpio_nand_id_table[] = {
|
|
{ .compatible = "gpio-control-nand" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, gpio_nand_id_table);
|
|
|
|
static int gpio_nand_get_config_of(const struct device *dev,
|
|
struct gpio_nand_platdata *plat)
|
|
{
|
|
u32 val;
|
|
|
|
if (!dev->of_node)
|
|
return -ENODEV;
|
|
|
|
if (!of_property_read_u32(dev->of_node, "bank-width", &val)) {
|
|
if (val == 2) {
|
|
plat->options |= NAND_BUSWIDTH_16;
|
|
} else if (val != 1) {
|
|
dev_err(dev, "invalid bank-width %u\n", val);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
plat->gpio_rdy = of_get_gpio(dev->of_node, 0);
|
|
plat->gpio_nce = of_get_gpio(dev->of_node, 1);
|
|
plat->gpio_ale = of_get_gpio(dev->of_node, 2);
|
|
plat->gpio_cle = of_get_gpio(dev->of_node, 3);
|
|
plat->gpio_nwp = of_get_gpio(dev->of_node, 4);
|
|
|
|
if (!of_property_read_u32(dev->of_node, "chip-delay", &val))
|
|
plat->chip_delay = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct resource *gpio_nand_get_io_sync_of(struct platform_device *pdev)
|
|
{
|
|
struct resource *r;
|
|
u64 addr;
|
|
|
|
if (of_property_read_u64(pdev->dev.of_node,
|
|
"gpio-control-nand,io-sync-reg", &addr))
|
|
return NULL;
|
|
|
|
r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL);
|
|
if (!r)
|
|
return NULL;
|
|
|
|
r->start = addr;
|
|
r->end = r->start + 0x3;
|
|
r->flags = IORESOURCE_MEM;
|
|
|
|
return r;
|
|
}
|
|
#else /* CONFIG_OF */
|
|
static inline int gpio_nand_get_config_of(const struct device *dev,
|
|
struct gpio_nand_platdata *plat)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static inline struct resource *
|
|
gpio_nand_get_io_sync_of(struct platform_device *pdev)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif /* CONFIG_OF */
|
|
|
|
static inline int gpio_nand_get_config(const struct device *dev,
|
|
struct gpio_nand_platdata *plat)
|
|
{
|
|
int ret = gpio_nand_get_config_of(dev, plat);
|
|
|
|
if (!ret)
|
|
return ret;
|
|
|
|
if (dev_get_platdata(dev)) {
|
|
memcpy(plat, dev_get_platdata(dev), sizeof(*plat));
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static inline struct resource *
|
|
gpio_nand_get_io_sync(struct platform_device *pdev)
|
|
{
|
|
struct resource *r = gpio_nand_get_io_sync_of(pdev);
|
|
|
|
if (r)
|
|
return r;
|
|
|
|
return platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
}
|
|
|
|
static int gpio_nand_remove(struct platform_device *pdev)
|
|
{
|
|
struct gpiomtd *gpiomtd = platform_get_drvdata(pdev);
|
|
|
|
nand_release(&gpiomtd->nand_chip);
|
|
|
|
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
|
|
gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
|
|
gpio_set_value(gpiomtd->plat.gpio_nce, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_nand_probe(struct platform_device *pdev)
|
|
{
|
|
struct gpiomtd *gpiomtd;
|
|
struct nand_chip *chip;
|
|
struct mtd_info *mtd;
|
|
struct resource *res;
|
|
int ret = 0;
|
|
|
|
if (!pdev->dev.of_node && !dev_get_platdata(&pdev->dev))
|
|
return -EINVAL;
|
|
|
|
gpiomtd = devm_kzalloc(&pdev->dev, sizeof(*gpiomtd), GFP_KERNEL);
|
|
if (!gpiomtd)
|
|
return -ENOMEM;
|
|
|
|
chip = &gpiomtd->nand_chip;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(chip->IO_ADDR_R))
|
|
return PTR_ERR(chip->IO_ADDR_R);
|
|
|
|
res = gpio_nand_get_io_sync(pdev);
|
|
if (res) {
|
|
gpiomtd->io_sync = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(gpiomtd->io_sync))
|
|
return PTR_ERR(gpiomtd->io_sync);
|
|
}
|
|
|
|
ret = gpio_nand_get_config(&pdev->dev, &gpiomtd->plat);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nce, "NAND NCE");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(gpiomtd->plat.gpio_nce, 1);
|
|
|
|
if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) {
|
|
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nwp,
|
|
"NAND NWP");
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_ale, "NAND ALE");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(gpiomtd->plat.gpio_ale, 0);
|
|
|
|
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_cle, "NAND CLE");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
|
|
|
|
if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
|
|
ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_rdy,
|
|
"NAND RDY");
|
|
if (ret)
|
|
return ret;
|
|
gpio_direction_input(gpiomtd->plat.gpio_rdy);
|
|
chip->dev_ready = gpio_nand_devready;
|
|
}
|
|
|
|
nand_set_flash_node(chip, pdev->dev.of_node);
|
|
chip->IO_ADDR_W = chip->IO_ADDR_R;
|
|
chip->ecc.mode = NAND_ECC_SOFT;
|
|
chip->ecc.algo = NAND_ECC_HAMMING;
|
|
chip->options = gpiomtd->plat.options;
|
|
chip->chip_delay = gpiomtd->plat.chip_delay;
|
|
chip->cmd_ctrl = gpio_nand_cmd_ctrl;
|
|
|
|
mtd = nand_to_mtd(chip);
|
|
mtd->dev.parent = &pdev->dev;
|
|
|
|
platform_set_drvdata(pdev, gpiomtd);
|
|
|
|
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
|
|
gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
|
|
|
|
if (nand_scan(mtd, 1)) {
|
|
ret = -ENXIO;
|
|
goto err_wp;
|
|
}
|
|
|
|
if (gpiomtd->plat.adjust_parts)
|
|
gpiomtd->plat.adjust_parts(&gpiomtd->plat, mtd->size);
|
|
|
|
ret = mtd_device_register(mtd, gpiomtd->plat.parts,
|
|
gpiomtd->plat.num_parts);
|
|
if (!ret)
|
|
return 0;
|
|
|
|
err_wp:
|
|
if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
|
|
gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver gpio_nand_driver = {
|
|
.probe = gpio_nand_probe,
|
|
.remove = gpio_nand_remove,
|
|
.driver = {
|
|
.name = "gpio-nand",
|
|
.of_match_table = of_match_ptr(gpio_nand_id_table),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(gpio_nand_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
|
|
MODULE_DESCRIPTION("GPIO NAND Driver");
|