352 lines
9.0 KiB
C
352 lines
9.0 KiB
C
/*
|
|
* Driver for USB ethernet port of Conexant CX82310-based ADSL routers
|
|
* Copyright (C) 2010 by Ondrej Zary
|
|
* some parts inspired by the cxacru driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/usbnet.h>
|
|
|
|
enum cx82310_cmd {
|
|
CMD_START = 0x84, /* no effect? */
|
|
CMD_STOP = 0x85, /* no effect? */
|
|
CMD_GET_STATUS = 0x90, /* returns nothing? */
|
|
CMD_GET_MAC_ADDR = 0x91, /* read MAC address */
|
|
CMD_GET_LINK_STATUS = 0x92, /* not useful, link is always up */
|
|
CMD_ETHERNET_MODE = 0x99, /* unknown, needed during init */
|
|
};
|
|
|
|
enum cx82310_status {
|
|
STATUS_UNDEFINED,
|
|
STATUS_SUCCESS,
|
|
STATUS_ERROR,
|
|
STATUS_UNSUPPORTED,
|
|
STATUS_UNIMPLEMENTED,
|
|
STATUS_PARAMETER_ERROR,
|
|
STATUS_DBG_LOOPBACK,
|
|
};
|
|
|
|
#define CMD_PACKET_SIZE 64
|
|
#define CMD_TIMEOUT 100
|
|
#define CMD_REPLY_RETRY 5
|
|
|
|
#define CX82310_MTU 1514
|
|
#define CMD_EP 0x01
|
|
|
|
/*
|
|
* execute control command
|
|
* - optionally send some data (command parameters)
|
|
* - optionally wait for the reply
|
|
* - optionally read some data from the reply
|
|
*/
|
|
static int cx82310_cmd(struct usbnet *dev, enum cx82310_cmd cmd, bool reply,
|
|
u8 *wdata, int wlen, u8 *rdata, int rlen)
|
|
{
|
|
int actual_len, retries, ret;
|
|
struct usb_device *udev = dev->udev;
|
|
u8 *buf = kzalloc(CMD_PACKET_SIZE, GFP_KERNEL);
|
|
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
/* create command packet */
|
|
buf[0] = cmd;
|
|
if (wdata)
|
|
memcpy(buf + 4, wdata, min_t(int, wlen, CMD_PACKET_SIZE - 4));
|
|
|
|
/* send command packet */
|
|
ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, CMD_EP), buf,
|
|
CMD_PACKET_SIZE, &actual_len, CMD_TIMEOUT);
|
|
if (ret < 0) {
|
|
if (cmd != CMD_GET_LINK_STATUS)
|
|
dev_err(&dev->udev->dev, "send command %#x: error %d\n",
|
|
cmd, ret);
|
|
goto end;
|
|
}
|
|
|
|
if (reply) {
|
|
/* wait for reply, retry if it's empty */
|
|
for (retries = 0; retries < CMD_REPLY_RETRY; retries++) {
|
|
ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, CMD_EP),
|
|
buf, CMD_PACKET_SIZE, &actual_len,
|
|
CMD_TIMEOUT);
|
|
if (ret < 0) {
|
|
if (cmd != CMD_GET_LINK_STATUS)
|
|
dev_err(&dev->udev->dev,
|
|
"reply receive error %d\n",
|
|
ret);
|
|
goto end;
|
|
}
|
|
if (actual_len > 0)
|
|
break;
|
|
}
|
|
if (actual_len == 0) {
|
|
dev_err(&dev->udev->dev, "no reply to command %#x\n",
|
|
cmd);
|
|
ret = -EIO;
|
|
goto end;
|
|
}
|
|
if (buf[0] != cmd) {
|
|
dev_err(&dev->udev->dev,
|
|
"got reply to command %#x, expected: %#x\n",
|
|
buf[0], cmd);
|
|
ret = -EIO;
|
|
goto end;
|
|
}
|
|
if (buf[1] != STATUS_SUCCESS) {
|
|
dev_err(&dev->udev->dev, "command %#x failed: %#x\n",
|
|
cmd, buf[1]);
|
|
ret = -EIO;
|
|
goto end;
|
|
}
|
|
if (rdata)
|
|
memcpy(rdata, buf + 4,
|
|
min_t(int, rlen, CMD_PACKET_SIZE - 4));
|
|
}
|
|
end:
|
|
kfree(buf);
|
|
return ret;
|
|
}
|
|
|
|
#define partial_len data[0] /* length of partial packet data */
|
|
#define partial_rem data[1] /* remaining (missing) data length */
|
|
#define partial_data data[2] /* partial packet data */
|
|
|
|
static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf)
|
|
{
|
|
int ret;
|
|
char buf[15];
|
|
struct usb_device *udev = dev->udev;
|
|
u8 link[3];
|
|
int timeout = 50;
|
|
|
|
/* avoid ADSL modems - continue only if iProduct is "USB NET CARD" */
|
|
if (usb_string(udev, udev->descriptor.iProduct, buf, sizeof(buf)) > 0
|
|
&& strcmp(buf, "USB NET CARD")) {
|
|
dev_info(&udev->dev, "ignoring: probably an ADSL modem\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = usbnet_get_endpoints(dev, intf);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* this must not include ethernet header as the device can send partial
|
|
* packets with no header (and sometimes even empty URBs)
|
|
*/
|
|
dev->net->hard_header_len = 0;
|
|
/* we can send at most 1514 bytes of data (+ 2-byte header) per URB */
|
|
dev->hard_mtu = CX82310_MTU + 2;
|
|
/* we can receive URBs up to 4KB from the device */
|
|
dev->rx_urb_size = 4096;
|
|
|
|
dev->partial_data = (unsigned long) kmalloc(dev->hard_mtu, GFP_KERNEL);
|
|
if (!dev->partial_data)
|
|
return -ENOMEM;
|
|
|
|
/* wait for firmware to become ready (indicated by the link being up) */
|
|
while (--timeout) {
|
|
ret = cx82310_cmd(dev, CMD_GET_LINK_STATUS, true, NULL, 0,
|
|
link, sizeof(link));
|
|
/* the command can time out during boot - it's not an error */
|
|
if (!ret && link[0] == 1 && link[2] == 1)
|
|
break;
|
|
msleep(500);
|
|
}
|
|
if (!timeout) {
|
|
dev_err(&udev->dev, "firmware not ready in time\n");
|
|
ret = -ETIMEDOUT;
|
|
goto err;
|
|
}
|
|
|
|
/* enable ethernet mode (?) */
|
|
ret = cx82310_cmd(dev, CMD_ETHERNET_MODE, true, "\x01", 1, NULL, 0);
|
|
if (ret) {
|
|
dev_err(&udev->dev, "unable to enable ethernet mode: %d\n",
|
|
ret);
|
|
goto err;
|
|
}
|
|
|
|
/* get the MAC address */
|
|
ret = cx82310_cmd(dev, CMD_GET_MAC_ADDR, true, NULL, 0,
|
|
dev->net->dev_addr, ETH_ALEN);
|
|
if (ret) {
|
|
dev_err(&udev->dev, "unable to read MAC address: %d\n", ret);
|
|
goto err;
|
|
}
|
|
|
|
/* start (does not seem to have any effect?) */
|
|
ret = cx82310_cmd(dev, CMD_START, false, NULL, 0, NULL, 0);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
kfree((void *)dev->partial_data);
|
|
return ret;
|
|
}
|
|
|
|
static void cx82310_unbind(struct usbnet *dev, struct usb_interface *intf)
|
|
{
|
|
kfree((void *)dev->partial_data);
|
|
}
|
|
|
|
/*
|
|
* RX is NOT easy - we can receive multiple packets per skb, each having 2-byte
|
|
* packet length at the beginning.
|
|
* The last packet might be incomplete (when it crosses the 4KB URB size),
|
|
* continuing in the next skb (without any headers).
|
|
* If a packet has odd length, there is one extra byte at the end (before next
|
|
* packet or at the end of the URB).
|
|
*/
|
|
static int cx82310_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
|
|
{
|
|
int len;
|
|
struct sk_buff *skb2;
|
|
|
|
/*
|
|
* If the last skb ended with an incomplete packet, this skb contains
|
|
* end of that packet at the beginning.
|
|
*/
|
|
if (dev->partial_rem) {
|
|
len = dev->partial_len + dev->partial_rem;
|
|
skb2 = alloc_skb(len, GFP_ATOMIC);
|
|
if (!skb2)
|
|
return 0;
|
|
skb_put(skb2, len);
|
|
memcpy(skb2->data, (void *)dev->partial_data,
|
|
dev->partial_len);
|
|
memcpy(skb2->data + dev->partial_len, skb->data,
|
|
dev->partial_rem);
|
|
usbnet_skb_return(dev, skb2);
|
|
skb_pull(skb, (dev->partial_rem + 1) & ~1);
|
|
dev->partial_rem = 0;
|
|
if (skb->len < 2)
|
|
return 1;
|
|
}
|
|
|
|
/* a skb can contain multiple packets */
|
|
while (skb->len > 1) {
|
|
/* first two bytes are packet length */
|
|
len = skb->data[0] | (skb->data[1] << 8);
|
|
skb_pull(skb, 2);
|
|
|
|
/* if last packet in the skb, let usbnet to process it */
|
|
if (len == skb->len || len + 1 == skb->len) {
|
|
skb_trim(skb, len);
|
|
break;
|
|
}
|
|
|
|
if (len > CX82310_MTU) {
|
|
dev_err(&dev->udev->dev, "RX packet too long: %d B\n",
|
|
len);
|
|
return 0;
|
|
}
|
|
|
|
/* incomplete packet, save it for the next skb */
|
|
if (len > skb->len) {
|
|
dev->partial_len = skb->len;
|
|
dev->partial_rem = len - skb->len;
|
|
memcpy((void *)dev->partial_data, skb->data,
|
|
dev->partial_len);
|
|
skb_pull(skb, skb->len);
|
|
break;
|
|
}
|
|
|
|
skb2 = alloc_skb(len, GFP_ATOMIC);
|
|
if (!skb2)
|
|
return 0;
|
|
skb_put(skb2, len);
|
|
memcpy(skb2->data, skb->data, len);
|
|
/* process the packet */
|
|
usbnet_skb_return(dev, skb2);
|
|
|
|
skb_pull(skb, (len + 1) & ~1);
|
|
}
|
|
|
|
/* let usbnet process the last packet */
|
|
return 1;
|
|
}
|
|
|
|
/* TX is easy, just add 2 bytes of length at the beginning */
|
|
static struct sk_buff *cx82310_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
|
|
gfp_t flags)
|
|
{
|
|
int len = skb->len;
|
|
|
|
if (skb_cow_head(skb, 2)) {
|
|
dev_kfree_skb_any(skb);
|
|
return NULL;
|
|
}
|
|
skb_push(skb, 2);
|
|
|
|
skb->data[0] = len;
|
|
skb->data[1] = len >> 8;
|
|
|
|
return skb;
|
|
}
|
|
|
|
|
|
static const struct driver_info cx82310_info = {
|
|
.description = "Conexant CX82310 USB ethernet",
|
|
.flags = FLAG_ETHER,
|
|
.bind = cx82310_bind,
|
|
.unbind = cx82310_unbind,
|
|
.rx_fixup = cx82310_rx_fixup,
|
|
.tx_fixup = cx82310_tx_fixup,
|
|
};
|
|
|
|
#define USB_DEVICE_CLASS(vend, prod, cl, sc, pr) \
|
|
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
|
|
USB_DEVICE_ID_MATCH_DEV_INFO, \
|
|
.idVendor = (vend), \
|
|
.idProduct = (prod), \
|
|
.bDeviceClass = (cl), \
|
|
.bDeviceSubClass = (sc), \
|
|
.bDeviceProtocol = (pr)
|
|
|
|
static const struct usb_device_id products[] = {
|
|
{
|
|
USB_DEVICE_CLASS(0x0572, 0xcb01, 0xff, 0, 0),
|
|
.driver_info = (unsigned long) &cx82310_info
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, products);
|
|
|
|
static struct usb_driver cx82310_driver = {
|
|
.name = "cx82310_eth",
|
|
.id_table = products,
|
|
.probe = usbnet_probe,
|
|
.disconnect = usbnet_disconnect,
|
|
.suspend = usbnet_suspend,
|
|
.resume = usbnet_resume,
|
|
.disable_hub_initiated_lpm = 1,
|
|
};
|
|
|
|
module_usb_driver(cx82310_driver);
|
|
|
|
MODULE_AUTHOR("Ondrej Zary");
|
|
MODULE_DESCRIPTION("Conexant CX82310-based ADSL router USB ethernet driver");
|
|
MODULE_LICENSE("GPL");
|