1587 lines
43 KiB
C
1587 lines
43 KiB
C
/*
|
|
* Copyright (c) 2008-2011 Atheros Communications Inc.
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/export.h>
|
|
#include "hw.h"
|
|
#include "hw-ops.h"
|
|
#include "ar9003_phy.h"
|
|
#include "ar9003_mci.h"
|
|
#include "ar9003_aic.h"
|
|
|
|
static void ar9003_mci_reset_req_wakeup(struct ath_hw *ah)
|
|
{
|
|
REG_RMW_FIELD(ah, AR_MCI_COMMAND2,
|
|
AR_MCI_COMMAND2_RESET_REQ_WAKEUP, 1);
|
|
udelay(1);
|
|
REG_RMW_FIELD(ah, AR_MCI_COMMAND2,
|
|
AR_MCI_COMMAND2_RESET_REQ_WAKEUP, 0);
|
|
}
|
|
|
|
static int ar9003_mci_wait_for_interrupt(struct ath_hw *ah, u32 address,
|
|
u32 bit_position, int time_out)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
|
|
while (time_out) {
|
|
if (!(REG_READ(ah, address) & bit_position)) {
|
|
udelay(10);
|
|
time_out -= 10;
|
|
|
|
if (time_out < 0)
|
|
break;
|
|
else
|
|
continue;
|
|
}
|
|
REG_WRITE(ah, address, bit_position);
|
|
|
|
if (address != AR_MCI_INTERRUPT_RX_MSG_RAW)
|
|
break;
|
|
|
|
if (bit_position & AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)
|
|
ar9003_mci_reset_req_wakeup(ah);
|
|
|
|
if (bit_position & (AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING |
|
|
AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING))
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
|
|
AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE);
|
|
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RAW, AR_MCI_INTERRUPT_RX_MSG);
|
|
break;
|
|
}
|
|
|
|
if (time_out <= 0) {
|
|
ath_dbg(common, MCI,
|
|
"MCI Wait for Reg 0x%08x = 0x%08x timeout\n",
|
|
address, bit_position);
|
|
ath_dbg(common, MCI,
|
|
"MCI INT_RAW = 0x%08x, RX_MSG_RAW = 0x%08x\n",
|
|
REG_READ(ah, AR_MCI_INTERRUPT_RAW),
|
|
REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW));
|
|
time_out = 0;
|
|
}
|
|
|
|
return time_out;
|
|
}
|
|
|
|
static void ar9003_mci_remote_reset(struct ath_hw *ah, bool wait_done)
|
|
{
|
|
u32 payload[4] = { 0xffffffff, 0xffffffff, 0xffffffff, 0xffffff00};
|
|
|
|
ar9003_mci_send_message(ah, MCI_REMOTE_RESET, 0, payload, 16,
|
|
wait_done, false);
|
|
udelay(5);
|
|
}
|
|
|
|
static void ar9003_mci_send_lna_transfer(struct ath_hw *ah, bool wait_done)
|
|
{
|
|
u32 payload = 0x00000000;
|
|
|
|
ar9003_mci_send_message(ah, MCI_LNA_TRANS, 0, &payload, 1,
|
|
wait_done, false);
|
|
}
|
|
|
|
static void ar9003_mci_send_req_wake(struct ath_hw *ah, bool wait_done)
|
|
{
|
|
ar9003_mci_send_message(ah, MCI_REQ_WAKE, MCI_FLAG_DISABLE_TIMESTAMP,
|
|
NULL, 0, wait_done, false);
|
|
udelay(5);
|
|
}
|
|
|
|
static void ar9003_mci_send_sys_waking(struct ath_hw *ah, bool wait_done)
|
|
{
|
|
ar9003_mci_send_message(ah, MCI_SYS_WAKING, MCI_FLAG_DISABLE_TIMESTAMP,
|
|
NULL, 0, wait_done, false);
|
|
}
|
|
|
|
static void ar9003_mci_send_lna_take(struct ath_hw *ah, bool wait_done)
|
|
{
|
|
u32 payload = 0x70000000;
|
|
|
|
ar9003_mci_send_message(ah, MCI_LNA_TAKE, 0, &payload, 1,
|
|
wait_done, false);
|
|
}
|
|
|
|
static void ar9003_mci_send_sys_sleeping(struct ath_hw *ah, bool wait_done)
|
|
{
|
|
ar9003_mci_send_message(ah, MCI_SYS_SLEEPING,
|
|
MCI_FLAG_DISABLE_TIMESTAMP,
|
|
NULL, 0, wait_done, false);
|
|
}
|
|
|
|
static void ar9003_mci_send_coex_version_query(struct ath_hw *ah,
|
|
bool wait_done)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 payload[4] = {0, 0, 0, 0};
|
|
|
|
if (mci->bt_version_known ||
|
|
(mci->bt_state == MCI_BT_SLEEP))
|
|
return;
|
|
|
|
MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
|
|
MCI_GPM_COEX_VERSION_QUERY);
|
|
ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16, wait_done, true);
|
|
}
|
|
|
|
static void ar9003_mci_send_coex_version_response(struct ath_hw *ah,
|
|
bool wait_done)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 payload[4] = {0, 0, 0, 0};
|
|
|
|
MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
|
|
MCI_GPM_COEX_VERSION_RESPONSE);
|
|
*(((u8 *)payload) + MCI_GPM_COEX_B_MAJOR_VERSION) =
|
|
mci->wlan_ver_major;
|
|
*(((u8 *)payload) + MCI_GPM_COEX_B_MINOR_VERSION) =
|
|
mci->wlan_ver_minor;
|
|
ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16, wait_done, true);
|
|
}
|
|
|
|
static void ar9003_mci_send_coex_wlan_channels(struct ath_hw *ah,
|
|
bool wait_done)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 *payload = &mci->wlan_channels[0];
|
|
|
|
if (!mci->wlan_channels_update ||
|
|
(mci->bt_state == MCI_BT_SLEEP))
|
|
return;
|
|
|
|
MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
|
|
MCI_GPM_COEX_WLAN_CHANNELS);
|
|
ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16, wait_done, true);
|
|
MCI_GPM_SET_TYPE_OPCODE(payload, 0xff, 0xff);
|
|
}
|
|
|
|
static void ar9003_mci_send_coex_bt_status_query(struct ath_hw *ah,
|
|
bool wait_done, u8 query_type)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 payload[4] = {0, 0, 0, 0};
|
|
bool query_btinfo;
|
|
|
|
if (mci->bt_state == MCI_BT_SLEEP)
|
|
return;
|
|
|
|
query_btinfo = !!(query_type & (MCI_GPM_COEX_QUERY_BT_ALL_INFO |
|
|
MCI_GPM_COEX_QUERY_BT_TOPOLOGY));
|
|
MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
|
|
MCI_GPM_COEX_STATUS_QUERY);
|
|
|
|
*(((u8 *)payload) + MCI_GPM_COEX_B_BT_BITMAP) = query_type;
|
|
|
|
/*
|
|
* If bt_status_query message is not sent successfully,
|
|
* then need_flush_btinfo should be set again.
|
|
*/
|
|
if (!ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
|
|
wait_done, true)) {
|
|
if (query_btinfo)
|
|
mci->need_flush_btinfo = true;
|
|
}
|
|
|
|
if (query_btinfo)
|
|
mci->query_bt = false;
|
|
}
|
|
|
|
static void ar9003_mci_send_coex_halt_bt_gpm(struct ath_hw *ah, bool halt,
|
|
bool wait_done)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 payload[4] = {0, 0, 0, 0};
|
|
|
|
MCI_GPM_SET_TYPE_OPCODE(payload, MCI_GPM_COEX_AGENT,
|
|
MCI_GPM_COEX_HALT_BT_GPM);
|
|
|
|
if (halt) {
|
|
mci->query_bt = true;
|
|
/* Send next unhalt no matter halt sent or not */
|
|
mci->unhalt_bt_gpm = true;
|
|
mci->need_flush_btinfo = true;
|
|
*(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) =
|
|
MCI_GPM_COEX_BT_GPM_HALT;
|
|
} else
|
|
*(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) =
|
|
MCI_GPM_COEX_BT_GPM_UNHALT;
|
|
|
|
ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16, wait_done, true);
|
|
}
|
|
|
|
static void ar9003_mci_prep_interface(struct ath_hw *ah)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 saved_mci_int_en;
|
|
u32 mci_timeout = 150;
|
|
|
|
mci->bt_state = MCI_BT_SLEEP;
|
|
saved_mci_int_en = REG_READ(ah, AR_MCI_INTERRUPT_EN);
|
|
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_EN, 0);
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
|
|
REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW));
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
|
|
REG_READ(ah, AR_MCI_INTERRUPT_RAW));
|
|
|
|
ar9003_mci_remote_reset(ah, true);
|
|
ar9003_mci_send_req_wake(ah, true);
|
|
|
|
if (!ar9003_mci_wait_for_interrupt(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
|
|
AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING, 500))
|
|
goto clear_redunt;
|
|
|
|
mci->bt_state = MCI_BT_AWAKE;
|
|
|
|
/*
|
|
* we don't need to send more remote_reset at this moment.
|
|
* If BT receive first remote_reset, then BT HW will
|
|
* be cleaned up and will be able to receive req_wake
|
|
* and BT HW will respond sys_waking.
|
|
* In this case, WLAN will receive BT's HW sys_waking.
|
|
* Otherwise, if BT SW missed initial remote_reset,
|
|
* that remote_reset will still clean up BT MCI RX,
|
|
* and the req_wake will wake BT up,
|
|
* and BT SW will respond this req_wake with a remote_reset and
|
|
* sys_waking. In this case, WLAN will receive BT's SW
|
|
* sys_waking. In either case, BT's RX is cleaned up. So we
|
|
* don't need to reply BT's remote_reset now, if any.
|
|
* Similarly, if in any case, WLAN can receive BT's sys_waking,
|
|
* that means WLAN's RX is also fine.
|
|
*/
|
|
ar9003_mci_send_sys_waking(ah, true);
|
|
udelay(10);
|
|
|
|
/*
|
|
* Set BT priority interrupt value to be 0xff to
|
|
* avoid having too many BT PRIORITY interrupts.
|
|
*/
|
|
REG_WRITE(ah, AR_MCI_BT_PRI0, 0xFFFFFFFF);
|
|
REG_WRITE(ah, AR_MCI_BT_PRI1, 0xFFFFFFFF);
|
|
REG_WRITE(ah, AR_MCI_BT_PRI2, 0xFFFFFFFF);
|
|
REG_WRITE(ah, AR_MCI_BT_PRI3, 0xFFFFFFFF);
|
|
REG_WRITE(ah, AR_MCI_BT_PRI, 0X000000FF);
|
|
|
|
/*
|
|
* A contention reset will be received after send out
|
|
* sys_waking. Also BT priority interrupt bits will be set.
|
|
* Clear those bits before the next step.
|
|
*/
|
|
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
|
|
AR_MCI_INTERRUPT_RX_MSG_CONT_RST);
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RAW, AR_MCI_INTERRUPT_BT_PRI);
|
|
|
|
if (mci->is_2g && MCI_ANT_ARCH_PA_LNA_SHARED(mci)) {
|
|
ar9003_mci_send_lna_transfer(ah, true);
|
|
udelay(5);
|
|
}
|
|
|
|
if (mci->is_2g && !mci->update_2g5g && MCI_ANT_ARCH_PA_LNA_SHARED(mci)) {
|
|
if (ar9003_mci_wait_for_interrupt(ah,
|
|
AR_MCI_INTERRUPT_RX_MSG_RAW,
|
|
AR_MCI_INTERRUPT_RX_MSG_LNA_INFO,
|
|
mci_timeout))
|
|
ath_dbg(common, MCI,
|
|
"MCI WLAN has control over the LNA & BT obeys it\n");
|
|
else
|
|
ath_dbg(common, MCI,
|
|
"MCI BT didn't respond to LNA_TRANS\n");
|
|
}
|
|
|
|
clear_redunt:
|
|
/* Clear the extra redundant SYS_WAKING from BT */
|
|
if ((mci->bt_state == MCI_BT_AWAKE) &&
|
|
(REG_READ_FIELD(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
|
|
AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING)) &&
|
|
(REG_READ_FIELD(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
|
|
AR_MCI_INTERRUPT_RX_MSG_SYS_SLEEPING) == 0)) {
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
|
|
AR_MCI_INTERRUPT_RX_MSG_SYS_WAKING);
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
|
|
AR_MCI_INTERRUPT_REMOTE_SLEEP_UPDATE);
|
|
}
|
|
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_EN, saved_mci_int_en);
|
|
}
|
|
|
|
void ar9003_mci_set_full_sleep(struct ath_hw *ah)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
if (ar9003_mci_state(ah, MCI_STATE_ENABLE) &&
|
|
(mci->bt_state != MCI_BT_SLEEP) &&
|
|
!mci->halted_bt_gpm) {
|
|
ar9003_mci_send_coex_halt_bt_gpm(ah, true, true);
|
|
}
|
|
|
|
mci->ready = false;
|
|
}
|
|
|
|
static void ar9003_mci_disable_interrupt(struct ath_hw *ah)
|
|
{
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_EN, 0);
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN, 0);
|
|
}
|
|
|
|
static void ar9003_mci_enable_interrupt(struct ath_hw *ah)
|
|
{
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_EN, AR_MCI_INTERRUPT_DEFAULT);
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_EN,
|
|
AR_MCI_INTERRUPT_RX_MSG_DEFAULT);
|
|
}
|
|
|
|
static bool ar9003_mci_check_int(struct ath_hw *ah, u32 ints)
|
|
{
|
|
u32 intr;
|
|
|
|
intr = REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW);
|
|
return ((intr & ints) == ints);
|
|
}
|
|
|
|
void ar9003_mci_get_interrupt(struct ath_hw *ah, u32 *raw_intr,
|
|
u32 *rx_msg_intr)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
*raw_intr = mci->raw_intr;
|
|
*rx_msg_intr = mci->rx_msg_intr;
|
|
|
|
/* Clean int bits after the values are read. */
|
|
mci->raw_intr = 0;
|
|
mci->rx_msg_intr = 0;
|
|
}
|
|
EXPORT_SYMBOL(ar9003_mci_get_interrupt);
|
|
|
|
void ar9003_mci_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 raw_intr, rx_msg_intr;
|
|
|
|
rx_msg_intr = REG_READ(ah, AR_MCI_INTERRUPT_RX_MSG_RAW);
|
|
raw_intr = REG_READ(ah, AR_MCI_INTERRUPT_RAW);
|
|
|
|
if ((raw_intr == 0xdeadbeef) || (rx_msg_intr == 0xdeadbeef)) {
|
|
ath_dbg(common, MCI,
|
|
"MCI gets 0xdeadbeef during int processing\n");
|
|
} else {
|
|
mci->rx_msg_intr |= rx_msg_intr;
|
|
mci->raw_intr |= raw_intr;
|
|
*masked |= ATH9K_INT_MCI;
|
|
|
|
if (rx_msg_intr & AR_MCI_INTERRUPT_RX_MSG_CONT_INFO)
|
|
mci->cont_status = REG_READ(ah, AR_MCI_CONT_STATUS);
|
|
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW, rx_msg_intr);
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RAW, raw_intr);
|
|
}
|
|
}
|
|
|
|
static void ar9003_mci_2g5g_changed(struct ath_hw *ah, bool is_2g)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
if (!mci->update_2g5g &&
|
|
(mci->is_2g != is_2g))
|
|
mci->update_2g5g = true;
|
|
|
|
mci->is_2g = is_2g;
|
|
}
|
|
|
|
static bool ar9003_mci_is_gpm_valid(struct ath_hw *ah, u32 msg_index)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 *payload;
|
|
u32 recv_type, offset;
|
|
|
|
if (msg_index == MCI_GPM_INVALID)
|
|
return false;
|
|
|
|
offset = msg_index << 4;
|
|
|
|
payload = (u32 *)(mci->gpm_buf + offset);
|
|
recv_type = MCI_GPM_TYPE(payload);
|
|
|
|
if (recv_type == MCI_GPM_RSVD_PATTERN)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static void ar9003_mci_observation_set_up(struct ath_hw *ah)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
if (mci->config & ATH_MCI_CONFIG_MCI_OBS_MCI) {
|
|
ath9k_hw_gpio_request_out(ah, 3, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_MCI_WLAN_DATA);
|
|
ath9k_hw_gpio_request_out(ah, 2, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_MCI_WLAN_CLK);
|
|
ath9k_hw_gpio_request_out(ah, 1, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_MCI_BT_DATA);
|
|
ath9k_hw_gpio_request_out(ah, 0, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_MCI_BT_CLK);
|
|
} else if (mci->config & ATH_MCI_CONFIG_MCI_OBS_TXRX) {
|
|
ath9k_hw_gpio_request_out(ah, 3, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_WL_IN_TX);
|
|
ath9k_hw_gpio_request_out(ah, 2, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_WL_IN_RX);
|
|
ath9k_hw_gpio_request_out(ah, 1, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_BT_IN_TX);
|
|
ath9k_hw_gpio_request_out(ah, 0, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_BT_IN_RX);
|
|
ath9k_hw_gpio_request_out(ah, 5, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
|
|
} else if (mci->config & ATH_MCI_CONFIG_MCI_OBS_BT) {
|
|
ath9k_hw_gpio_request_out(ah, 3, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_BT_IN_TX);
|
|
ath9k_hw_gpio_request_out(ah, 2, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_BT_IN_RX);
|
|
ath9k_hw_gpio_request_out(ah, 1, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_MCI_BT_DATA);
|
|
ath9k_hw_gpio_request_out(ah, 0, NULL,
|
|
AR_GPIO_OUTPUT_MUX_AS_MCI_BT_CLK);
|
|
} else
|
|
return;
|
|
|
|
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
|
|
|
|
REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL, AR_GLB_DS_JTAG_DISABLE, 1);
|
|
REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL, AR_GLB_WLAN_UART_INTF_EN, 0);
|
|
REG_SET_BIT(ah, AR_GLB_GPIO_CONTROL, ATH_MCI_CONFIG_MCI_OBS_GPIO);
|
|
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_GPIO_OBS_SEL, 0);
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_MAC_BB_OBS_SEL, 1);
|
|
REG_WRITE(ah, AR_OBS, 0x4b);
|
|
REG_RMW_FIELD(ah, AR_DIAG_SW, AR_DIAG_OBS_PT_SEL1, 0x03);
|
|
REG_RMW_FIELD(ah, AR_DIAG_SW, AR_DIAG_OBS_PT_SEL2, 0x01);
|
|
REG_RMW_FIELD(ah, AR_MACMISC, AR_MACMISC_MISC_OBS_BUS_LSB, 0x02);
|
|
REG_RMW_FIELD(ah, AR_MACMISC, AR_MACMISC_MISC_OBS_BUS_MSB, 0x03);
|
|
REG_RMW_FIELD(ah, AR_PHY_TEST_CTL_STATUS,
|
|
AR_PHY_TEST_CTL_DEBUGPORT_SEL, 0x07);
|
|
}
|
|
|
|
static bool ar9003_mci_send_coex_bt_flags(struct ath_hw *ah, bool wait_done,
|
|
u8 opcode, u32 bt_flags)
|
|
{
|
|
u32 pld[4] = {0, 0, 0, 0};
|
|
|
|
MCI_GPM_SET_TYPE_OPCODE(pld, MCI_GPM_COEX_AGENT,
|
|
MCI_GPM_COEX_BT_UPDATE_FLAGS);
|
|
|
|
*(((u8 *)pld) + MCI_GPM_COEX_B_BT_FLAGS_OP) = opcode;
|
|
*(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 0) = bt_flags & 0xFF;
|
|
*(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 1) = (bt_flags >> 8) & 0xFF;
|
|
*(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 2) = (bt_flags >> 16) & 0xFF;
|
|
*(((u8 *)pld) + MCI_GPM_COEX_W_BT_FLAGS + 3) = (bt_flags >> 24) & 0xFF;
|
|
|
|
return ar9003_mci_send_message(ah, MCI_GPM, 0, pld, 16,
|
|
wait_done, true);
|
|
}
|
|
|
|
static void ar9003_mci_sync_bt_state(struct ath_hw *ah)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 cur_bt_state;
|
|
|
|
cur_bt_state = ar9003_mci_state(ah, MCI_STATE_REMOTE_SLEEP);
|
|
|
|
if (mci->bt_state != cur_bt_state)
|
|
mci->bt_state = cur_bt_state;
|
|
|
|
if (mci->bt_state != MCI_BT_SLEEP) {
|
|
|
|
ar9003_mci_send_coex_version_query(ah, true);
|
|
ar9003_mci_send_coex_wlan_channels(ah, true);
|
|
|
|
if (mci->unhalt_bt_gpm == true)
|
|
ar9003_mci_send_coex_halt_bt_gpm(ah, false, true);
|
|
}
|
|
}
|
|
|
|
void ar9003_mci_check_bt(struct ath_hw *ah)
|
|
{
|
|
struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
|
|
|
|
if (!mci_hw->ready)
|
|
return;
|
|
|
|
/*
|
|
* check BT state again to make
|
|
* sure it's not changed.
|
|
*/
|
|
ar9003_mci_sync_bt_state(ah);
|
|
ar9003_mci_2g5g_switch(ah, true);
|
|
|
|
if ((mci_hw->bt_state == MCI_BT_AWAKE) &&
|
|
(mci_hw->query_bt == true)) {
|
|
mci_hw->need_flush_btinfo = true;
|
|
}
|
|
}
|
|
|
|
static void ar9003_mci_process_gpm_extra(struct ath_hw *ah, u8 gpm_type,
|
|
u8 gpm_opcode, u32 *p_gpm)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u8 *p_data = (u8 *) p_gpm;
|
|
|
|
if (gpm_type != MCI_GPM_COEX_AGENT)
|
|
return;
|
|
|
|
switch (gpm_opcode) {
|
|
case MCI_GPM_COEX_VERSION_QUERY:
|
|
ath_dbg(common, MCI, "MCI Recv GPM COEX Version Query\n");
|
|
ar9003_mci_send_coex_version_response(ah, true);
|
|
break;
|
|
case MCI_GPM_COEX_VERSION_RESPONSE:
|
|
ath_dbg(common, MCI, "MCI Recv GPM COEX Version Response\n");
|
|
mci->bt_ver_major =
|
|
*(p_data + MCI_GPM_COEX_B_MAJOR_VERSION);
|
|
mci->bt_ver_minor =
|
|
*(p_data + MCI_GPM_COEX_B_MINOR_VERSION);
|
|
mci->bt_version_known = true;
|
|
ath_dbg(common, MCI, "MCI BT Coex version: %d.%d\n",
|
|
mci->bt_ver_major, mci->bt_ver_minor);
|
|
break;
|
|
case MCI_GPM_COEX_STATUS_QUERY:
|
|
ath_dbg(common, MCI,
|
|
"MCI Recv GPM COEX Status Query = 0x%02X\n",
|
|
*(p_data + MCI_GPM_COEX_B_WLAN_BITMAP));
|
|
mci->wlan_channels_update = true;
|
|
ar9003_mci_send_coex_wlan_channels(ah, true);
|
|
break;
|
|
case MCI_GPM_COEX_BT_PROFILE_INFO:
|
|
mci->query_bt = true;
|
|
ath_dbg(common, MCI, "MCI Recv GPM COEX BT_Profile_Info\n");
|
|
break;
|
|
case MCI_GPM_COEX_BT_STATUS_UPDATE:
|
|
mci->query_bt = true;
|
|
ath_dbg(common, MCI,
|
|
"MCI Recv GPM COEX BT_Status_Update SEQ=%d (drop&query)\n",
|
|
*(p_gpm + 3));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static u32 ar9003_mci_wait_for_gpm(struct ath_hw *ah, u8 gpm_type,
|
|
u8 gpm_opcode, int time_out)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 *p_gpm = NULL, mismatch = 0, more_data;
|
|
u32 offset;
|
|
u8 recv_type = 0, recv_opcode = 0;
|
|
bool b_is_bt_cal_done = (gpm_type == MCI_GPM_BT_CAL_DONE);
|
|
|
|
more_data = time_out ? MCI_GPM_NOMORE : MCI_GPM_MORE;
|
|
|
|
while (time_out > 0) {
|
|
if (p_gpm) {
|
|
MCI_GPM_RECYCLE(p_gpm);
|
|
p_gpm = NULL;
|
|
}
|
|
|
|
if (more_data != MCI_GPM_MORE)
|
|
time_out = ar9003_mci_wait_for_interrupt(ah,
|
|
AR_MCI_INTERRUPT_RX_MSG_RAW,
|
|
AR_MCI_INTERRUPT_RX_MSG_GPM,
|
|
time_out);
|
|
|
|
if (!time_out)
|
|
break;
|
|
|
|
offset = ar9003_mci_get_next_gpm_offset(ah, &more_data);
|
|
|
|
if (offset == MCI_GPM_INVALID)
|
|
continue;
|
|
|
|
p_gpm = (u32 *) (mci->gpm_buf + offset);
|
|
recv_type = MCI_GPM_TYPE(p_gpm);
|
|
recv_opcode = MCI_GPM_OPCODE(p_gpm);
|
|
|
|
if (MCI_GPM_IS_CAL_TYPE(recv_type)) {
|
|
if (recv_type == gpm_type) {
|
|
if ((gpm_type == MCI_GPM_BT_CAL_DONE) &&
|
|
!b_is_bt_cal_done) {
|
|
gpm_type = MCI_GPM_BT_CAL_GRANT;
|
|
continue;
|
|
}
|
|
break;
|
|
}
|
|
} else if ((recv_type == gpm_type) &&
|
|
(recv_opcode == gpm_opcode))
|
|
break;
|
|
|
|
/*
|
|
* check if it's cal_grant
|
|
*
|
|
* When we're waiting for cal_grant in reset routine,
|
|
* it's possible that BT sends out cal_request at the
|
|
* same time. Since BT's calibration doesn't happen
|
|
* that often, we'll let BT completes calibration then
|
|
* we continue to wait for cal_grant from BT.
|
|
* Orginal: Wait BT_CAL_GRANT.
|
|
* New: Receive BT_CAL_REQ -> send WLAN_CAL_GRANT->wait
|
|
* BT_CAL_DONE -> Wait BT_CAL_GRANT.
|
|
*/
|
|
|
|
if ((gpm_type == MCI_GPM_BT_CAL_GRANT) &&
|
|
(recv_type == MCI_GPM_BT_CAL_REQ)) {
|
|
|
|
u32 payload[4] = {0, 0, 0, 0};
|
|
|
|
gpm_type = MCI_GPM_BT_CAL_DONE;
|
|
MCI_GPM_SET_CAL_TYPE(payload,
|
|
MCI_GPM_WLAN_CAL_GRANT);
|
|
ar9003_mci_send_message(ah, MCI_GPM, 0, payload, 16,
|
|
false, false);
|
|
continue;
|
|
} else {
|
|
ath_dbg(common, MCI, "MCI GPM subtype not match 0x%x\n",
|
|
*(p_gpm + 1));
|
|
mismatch++;
|
|
ar9003_mci_process_gpm_extra(ah, recv_type,
|
|
recv_opcode, p_gpm);
|
|
}
|
|
}
|
|
|
|
if (p_gpm) {
|
|
MCI_GPM_RECYCLE(p_gpm);
|
|
p_gpm = NULL;
|
|
}
|
|
|
|
if (time_out <= 0)
|
|
time_out = 0;
|
|
|
|
while (more_data == MCI_GPM_MORE) {
|
|
offset = ar9003_mci_get_next_gpm_offset(ah, &more_data);
|
|
if (offset == MCI_GPM_INVALID)
|
|
break;
|
|
|
|
p_gpm = (u32 *) (mci->gpm_buf + offset);
|
|
recv_type = MCI_GPM_TYPE(p_gpm);
|
|
recv_opcode = MCI_GPM_OPCODE(p_gpm);
|
|
|
|
if (!MCI_GPM_IS_CAL_TYPE(recv_type))
|
|
ar9003_mci_process_gpm_extra(ah, recv_type,
|
|
recv_opcode, p_gpm);
|
|
|
|
MCI_GPM_RECYCLE(p_gpm);
|
|
}
|
|
|
|
return time_out;
|
|
}
|
|
|
|
bool ar9003_mci_start_reset(struct ath_hw *ah, struct ath9k_channel *chan)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
|
|
u32 payload[4] = {0, 0, 0, 0};
|
|
|
|
ar9003_mci_2g5g_changed(ah, IS_CHAN_2GHZ(chan));
|
|
|
|
if (mci_hw->bt_state != MCI_BT_CAL_START)
|
|
return false;
|
|
|
|
mci_hw->bt_state = MCI_BT_CAL;
|
|
|
|
/*
|
|
* MCI FIX: disable mci interrupt here. This is to avoid
|
|
* SW_MSG_DONE or RX_MSG bits to trigger MCI_INT and
|
|
* lead to mci_intr reentry.
|
|
*/
|
|
ar9003_mci_disable_interrupt(ah);
|
|
|
|
MCI_GPM_SET_CAL_TYPE(payload, MCI_GPM_WLAN_CAL_GRANT);
|
|
ar9003_mci_send_message(ah, MCI_GPM, 0, payload,
|
|
16, true, false);
|
|
|
|
/* Wait BT calibration to be completed for 25ms */
|
|
|
|
if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_DONE,
|
|
0, 25000))
|
|
ath_dbg(common, MCI, "MCI BT_CAL_DONE received\n");
|
|
else
|
|
ath_dbg(common, MCI,
|
|
"MCI BT_CAL_DONE not received\n");
|
|
|
|
mci_hw->bt_state = MCI_BT_AWAKE;
|
|
/* MCI FIX: enable mci interrupt here */
|
|
ar9003_mci_enable_interrupt(ah);
|
|
|
|
return true;
|
|
}
|
|
|
|
int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan,
|
|
struct ath9k_hw_cal_data *caldata)
|
|
{
|
|
struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
|
|
|
|
if (!mci_hw->ready)
|
|
return 0;
|
|
|
|
if (!IS_CHAN_2GHZ(chan) || (mci_hw->bt_state != MCI_BT_SLEEP))
|
|
goto exit;
|
|
|
|
if (!ar9003_mci_check_int(ah, AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET) &&
|
|
!ar9003_mci_check_int(ah, AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE))
|
|
goto exit;
|
|
|
|
/*
|
|
* BT is sleeping. Check if BT wakes up during
|
|
* WLAN calibration. If BT wakes up during
|
|
* WLAN calibration, need to go through all
|
|
* message exchanges again and recal.
|
|
*/
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
|
|
(AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET |
|
|
AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE));
|
|
|
|
ar9003_mci_remote_reset(ah, true);
|
|
ar9003_mci_send_sys_waking(ah, true);
|
|
udelay(1);
|
|
|
|
if (IS_CHAN_2GHZ(chan))
|
|
ar9003_mci_send_lna_transfer(ah, true);
|
|
|
|
mci_hw->bt_state = MCI_BT_AWAKE;
|
|
|
|
REG_CLR_BIT(ah, AR_PHY_TIMING4,
|
|
1 << AR_PHY_TIMING_CONTROL4_DO_GAIN_DC_IQ_CAL_SHIFT);
|
|
|
|
if (caldata) {
|
|
clear_bit(TXIQCAL_DONE, &caldata->cal_flags);
|
|
clear_bit(TXCLCAL_DONE, &caldata->cal_flags);
|
|
clear_bit(RTT_DONE, &caldata->cal_flags);
|
|
}
|
|
|
|
if (!ath9k_hw_init_cal(ah, chan))
|
|
return -EIO;
|
|
|
|
REG_SET_BIT(ah, AR_PHY_TIMING4,
|
|
1 << AR_PHY_TIMING_CONTROL4_DO_GAIN_DC_IQ_CAL_SHIFT);
|
|
|
|
exit:
|
|
ar9003_mci_enable_interrupt(ah);
|
|
return 0;
|
|
}
|
|
|
|
static void ar9003_mci_mute_bt(struct ath_hw *ah)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
/* disable all MCI messages */
|
|
REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE, 0xffff0000);
|
|
REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS0, 0xffffffff);
|
|
REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS1, 0xffffffff);
|
|
REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS2, 0xffffffff);
|
|
REG_WRITE(ah, AR_BTCOEX_WL_WEIGHTS3, 0xffffffff);
|
|
REG_SET_BIT(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
|
|
|
|
/* wait pending HW messages to flush out */
|
|
udelay(10);
|
|
|
|
/*
|
|
* Send LNA_TAKE and SYS_SLEEPING when
|
|
* 1. reset not after resuming from full sleep
|
|
* 2. before reset MCI RX, to quiet BT and avoid MCI RX misalignment
|
|
*/
|
|
if (MCI_ANT_ARCH_PA_LNA_SHARED(mci)) {
|
|
ar9003_mci_send_lna_take(ah, true);
|
|
udelay(5);
|
|
}
|
|
|
|
ar9003_mci_send_sys_sleeping(ah, true);
|
|
}
|
|
|
|
static void ar9003_mci_osla_setup(struct ath_hw *ah, bool enable)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 thresh;
|
|
|
|
if (!enable) {
|
|
REG_CLR_BIT(ah, AR_BTCOEX_CTRL,
|
|
AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
|
|
return;
|
|
}
|
|
REG_RMW_FIELD(ah, AR_MCI_SCHD_TABLE_2, AR_MCI_SCHD_TABLE_2_HW_BASED, 1);
|
|
REG_RMW_FIELD(ah, AR_MCI_SCHD_TABLE_2,
|
|
AR_MCI_SCHD_TABLE_2_MEM_BASED, 1);
|
|
|
|
if (AR_SREV_9565(ah))
|
|
REG_RMW_FIELD(ah, AR_MCI_MISC, AR_MCI_MISC_HW_FIX_EN, 1);
|
|
|
|
if (!(mci->config & ATH_MCI_CONFIG_DISABLE_AGGR_THRESH)) {
|
|
thresh = MS(mci->config, ATH_MCI_CONFIG_AGGR_THRESH);
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
|
|
AR_BTCOEX_CTRL_AGGR_THRESH, thresh);
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
|
|
AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN, 1);
|
|
} else
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
|
|
AR_BTCOEX_CTRL_TIME_TO_NEXT_BT_THRESH_EN, 0);
|
|
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
|
|
AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN, 1);
|
|
}
|
|
|
|
static void ar9003_mci_stat_setup(struct ath_hw *ah)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
if (!AR_SREV_9565(ah))
|
|
return;
|
|
|
|
if (mci->config & ATH_MCI_CONFIG_MCI_STAT_DBG) {
|
|
REG_RMW_FIELD(ah, AR_MCI_DBG_CNT_CTRL,
|
|
AR_MCI_DBG_CNT_CTRL_ENABLE, 1);
|
|
REG_RMW_FIELD(ah, AR_MCI_DBG_CNT_CTRL,
|
|
AR_MCI_DBG_CNT_CTRL_BT_LINKID,
|
|
MCI_STAT_ALL_BT_LINKID);
|
|
} else {
|
|
REG_RMW_FIELD(ah, AR_MCI_DBG_CNT_CTRL,
|
|
AR_MCI_DBG_CNT_CTRL_ENABLE, 0);
|
|
}
|
|
}
|
|
|
|
static void ar9003_mci_set_btcoex_ctrl_9565_1ANT(struct ath_hw *ah)
|
|
{
|
|
u32 regval;
|
|
|
|
regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) |
|
|
SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) |
|
|
SM(1, AR_BTCOEX_CTRL_PA_SHARED) |
|
|
SM(1, AR_BTCOEX_CTRL_LNA_SHARED) |
|
|
SM(1, AR_BTCOEX_CTRL_NUM_ANTENNAS) |
|
|
SM(1, AR_BTCOEX_CTRL_RX_CHAIN_MASK) |
|
|
SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) |
|
|
SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) |
|
|
SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
|
|
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2,
|
|
AR_BTCOEX_CTRL2_TX_CHAIN_MASK, 0x1);
|
|
REG_WRITE(ah, AR_BTCOEX_CTRL, regval);
|
|
}
|
|
|
|
static void ar9003_mci_set_btcoex_ctrl_9565_2ANT(struct ath_hw *ah)
|
|
{
|
|
u32 regval;
|
|
|
|
regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) |
|
|
SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) |
|
|
SM(0, AR_BTCOEX_CTRL_PA_SHARED) |
|
|
SM(0, AR_BTCOEX_CTRL_LNA_SHARED) |
|
|
SM(2, AR_BTCOEX_CTRL_NUM_ANTENNAS) |
|
|
SM(1, AR_BTCOEX_CTRL_RX_CHAIN_MASK) |
|
|
SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) |
|
|
SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) |
|
|
SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
|
|
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2,
|
|
AR_BTCOEX_CTRL2_TX_CHAIN_MASK, 0x0);
|
|
REG_WRITE(ah, AR_BTCOEX_CTRL, regval);
|
|
}
|
|
|
|
static void ar9003_mci_set_btcoex_ctrl_9462(struct ath_hw *ah)
|
|
{
|
|
u32 regval;
|
|
|
|
regval = SM(1, AR_BTCOEX_CTRL_AR9462_MODE) |
|
|
SM(1, AR_BTCOEX_CTRL_WBTIMER_EN) |
|
|
SM(1, AR_BTCOEX_CTRL_PA_SHARED) |
|
|
SM(1, AR_BTCOEX_CTRL_LNA_SHARED) |
|
|
SM(2, AR_BTCOEX_CTRL_NUM_ANTENNAS) |
|
|
SM(3, AR_BTCOEX_CTRL_RX_CHAIN_MASK) |
|
|
SM(0, AR_BTCOEX_CTRL_1_CHAIN_ACK) |
|
|
SM(0, AR_BTCOEX_CTRL_1_CHAIN_BCN) |
|
|
SM(0, AR_BTCOEX_CTRL_ONE_STEP_LOOK_AHEAD_EN);
|
|
|
|
REG_WRITE(ah, AR_BTCOEX_CTRL, regval);
|
|
}
|
|
|
|
int ar9003_mci_reset(struct ath_hw *ah, bool en_int, bool is_2g,
|
|
bool is_full_sleep)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 regval, i;
|
|
|
|
ath_dbg(common, MCI, "MCI Reset (full_sleep = %d, is_2g = %d)\n",
|
|
is_full_sleep, is_2g);
|
|
|
|
if (REG_READ(ah, AR_BTCOEX_CTRL) == 0xdeadbeef) {
|
|
ath_err(common, "BTCOEX control register is dead\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Program MCI DMA related registers */
|
|
REG_WRITE(ah, AR_MCI_GPM_0, mci->gpm_addr);
|
|
REG_WRITE(ah, AR_MCI_GPM_1, mci->gpm_len);
|
|
REG_WRITE(ah, AR_MCI_SCHD_TABLE_0, mci->sched_addr);
|
|
|
|
/*
|
|
* To avoid MCI state machine be affected by incoming remote MCI msgs,
|
|
* MCI mode will be enabled later, right before reset the MCI TX and RX.
|
|
*/
|
|
if (AR_SREV_9565(ah)) {
|
|
u8 ant = MS(mci->config, ATH_MCI_CONFIG_ANT_ARCH);
|
|
|
|
if (ant == ATH_MCI_ANT_ARCH_1_ANT_PA_LNA_SHARED)
|
|
ar9003_mci_set_btcoex_ctrl_9565_1ANT(ah);
|
|
else
|
|
ar9003_mci_set_btcoex_ctrl_9565_2ANT(ah);
|
|
} else {
|
|
ar9003_mci_set_btcoex_ctrl_9462(ah);
|
|
}
|
|
|
|
if (is_2g && !(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA))
|
|
ar9003_mci_osla_setup(ah, true);
|
|
else
|
|
ar9003_mci_osla_setup(ah, false);
|
|
|
|
REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
|
|
AR_BTCOEX_CTRL_SPDT_ENABLE);
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL3,
|
|
AR_BTCOEX_CTRL3_CONT_INFO_TIMEOUT, 20);
|
|
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2, AR_BTCOEX_CTRL2_RX_DEWEIGHT, 0);
|
|
REG_RMW_FIELD(ah, AR_PCU_MISC, AR_PCU_BT_ANT_PREVENT_RX, 0);
|
|
|
|
/* Set the time out to 3.125ms (5 BT slots) */
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_WL_LNA, AR_BTCOEX_WL_LNA_TIMEOUT, 0x3D090);
|
|
|
|
/* concurrent tx priority */
|
|
if (mci->config & ATH_MCI_CONFIG_CONCUR_TX) {
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2,
|
|
AR_BTCOEX_CTRL2_DESC_BASED_TXPWR_ENABLE, 0);
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL2,
|
|
AR_BTCOEX_CTRL2_TXPWR_THRESH, 0x7f);
|
|
REG_RMW_FIELD(ah, AR_BTCOEX_CTRL,
|
|
AR_BTCOEX_CTRL_REDUCE_TXPWR, 0);
|
|
for (i = 0; i < 8; i++)
|
|
REG_WRITE(ah, AR_BTCOEX_MAX_TXPWR(i), 0x7f7f7f7f);
|
|
}
|
|
|
|
regval = MS(mci->config, ATH_MCI_CONFIG_CLK_DIV);
|
|
REG_RMW_FIELD(ah, AR_MCI_TX_CTRL, AR_MCI_TX_CTRL_CLK_DIV, regval);
|
|
REG_SET_BIT(ah, AR_BTCOEX_CTRL, AR_BTCOEX_CTRL_MCI_MODE_EN);
|
|
|
|
/* Resetting the Rx and Tx paths of MCI */
|
|
regval = REG_READ(ah, AR_MCI_COMMAND2);
|
|
regval |= SM(1, AR_MCI_COMMAND2_RESET_TX);
|
|
REG_WRITE(ah, AR_MCI_COMMAND2, regval);
|
|
|
|
udelay(1);
|
|
|
|
regval &= ~SM(1, AR_MCI_COMMAND2_RESET_TX);
|
|
REG_WRITE(ah, AR_MCI_COMMAND2, regval);
|
|
|
|
if (is_full_sleep) {
|
|
ar9003_mci_mute_bt(ah);
|
|
udelay(100);
|
|
}
|
|
|
|
/* Check pending GPM msg before MCI Reset Rx */
|
|
ar9003_mci_check_gpm_offset(ah);
|
|
|
|
regval |= SM(1, AR_MCI_COMMAND2_RESET_RX);
|
|
REG_WRITE(ah, AR_MCI_COMMAND2, regval);
|
|
udelay(1);
|
|
regval &= ~SM(1, AR_MCI_COMMAND2_RESET_RX);
|
|
REG_WRITE(ah, AR_MCI_COMMAND2, regval);
|
|
|
|
/* Init GPM offset after MCI Reset Rx */
|
|
ar9003_mci_state(ah, MCI_STATE_INIT_GPM_OFFSET);
|
|
|
|
REG_WRITE(ah, AR_MCI_MSG_ATTRIBUTES_TABLE,
|
|
(SM(0xe801, AR_MCI_MSG_ATTRIBUTES_TABLE_INVALID_HDR) |
|
|
SM(0x0000, AR_MCI_MSG_ATTRIBUTES_TABLE_CHECKSUM)));
|
|
|
|
if (MCI_ANT_ARCH_PA_LNA_SHARED(mci))
|
|
REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
|
|
AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
|
|
else
|
|
REG_SET_BIT(ah, AR_MCI_TX_CTRL,
|
|
AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
|
|
|
|
ar9003_mci_observation_set_up(ah);
|
|
|
|
mci->ready = true;
|
|
ar9003_mci_prep_interface(ah);
|
|
ar9003_mci_stat_setup(ah);
|
|
|
|
if (en_int)
|
|
ar9003_mci_enable_interrupt(ah);
|
|
|
|
if (ath9k_hw_is_aic_enabled(ah))
|
|
ar9003_aic_start_normal(ah);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ar9003_mci_stop_bt(struct ath_hw *ah, bool save_fullsleep)
|
|
{
|
|
struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
|
|
|
|
ar9003_mci_disable_interrupt(ah);
|
|
|
|
if (mci_hw->ready && !save_fullsleep) {
|
|
ar9003_mci_mute_bt(ah);
|
|
udelay(20);
|
|
REG_WRITE(ah, AR_BTCOEX_CTRL, 0);
|
|
}
|
|
|
|
mci_hw->bt_state = MCI_BT_SLEEP;
|
|
mci_hw->ready = false;
|
|
}
|
|
|
|
static void ar9003_mci_send_2g5g_status(struct ath_hw *ah, bool wait_done)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 new_flags, to_set, to_clear;
|
|
|
|
if (!mci->update_2g5g || (mci->bt_state == MCI_BT_SLEEP))
|
|
return;
|
|
|
|
if (mci->is_2g) {
|
|
new_flags = MCI_2G_FLAGS;
|
|
to_clear = MCI_2G_FLAGS_CLEAR_MASK;
|
|
to_set = MCI_2G_FLAGS_SET_MASK;
|
|
} else {
|
|
new_flags = MCI_5G_FLAGS;
|
|
to_clear = MCI_5G_FLAGS_CLEAR_MASK;
|
|
to_set = MCI_5G_FLAGS_SET_MASK;
|
|
}
|
|
|
|
if (to_clear)
|
|
ar9003_mci_send_coex_bt_flags(ah, wait_done,
|
|
MCI_GPM_COEX_BT_FLAGS_CLEAR,
|
|
to_clear);
|
|
if (to_set)
|
|
ar9003_mci_send_coex_bt_flags(ah, wait_done,
|
|
MCI_GPM_COEX_BT_FLAGS_SET,
|
|
to_set);
|
|
}
|
|
|
|
static void ar9003_mci_queue_unsent_gpm(struct ath_hw *ah, u8 header,
|
|
u32 *payload, bool queue)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u8 type, opcode;
|
|
|
|
/* check if the message is to be queued */
|
|
if (header != MCI_GPM)
|
|
return;
|
|
|
|
type = MCI_GPM_TYPE(payload);
|
|
opcode = MCI_GPM_OPCODE(payload);
|
|
|
|
if (type != MCI_GPM_COEX_AGENT)
|
|
return;
|
|
|
|
switch (opcode) {
|
|
case MCI_GPM_COEX_BT_UPDATE_FLAGS:
|
|
if (*(((u8 *)payload) + MCI_GPM_COEX_B_BT_FLAGS_OP) ==
|
|
MCI_GPM_COEX_BT_FLAGS_READ)
|
|
break;
|
|
|
|
mci->update_2g5g = queue;
|
|
|
|
break;
|
|
case MCI_GPM_COEX_WLAN_CHANNELS:
|
|
mci->wlan_channels_update = queue;
|
|
break;
|
|
case MCI_GPM_COEX_HALT_BT_GPM:
|
|
if (*(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) ==
|
|
MCI_GPM_COEX_BT_GPM_UNHALT) {
|
|
mci->unhalt_bt_gpm = queue;
|
|
|
|
if (!queue)
|
|
mci->halted_bt_gpm = false;
|
|
}
|
|
|
|
if (*(((u8 *)payload) + MCI_GPM_COEX_B_HALT_STATE) ==
|
|
MCI_GPM_COEX_BT_GPM_HALT) {
|
|
|
|
mci->halted_bt_gpm = !queue;
|
|
}
|
|
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void ar9003_mci_2g5g_switch(struct ath_hw *ah, bool force)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
if (!mci->update_2g5g && !force)
|
|
return;
|
|
|
|
if (mci->is_2g) {
|
|
ar9003_mci_send_2g5g_status(ah, true);
|
|
ar9003_mci_send_lna_transfer(ah, true);
|
|
udelay(5);
|
|
|
|
REG_CLR_BIT(ah, AR_MCI_TX_CTRL,
|
|
AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
|
|
REG_CLR_BIT(ah, AR_PHY_GLB_CONTROL,
|
|
AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
|
|
|
|
if (!(mci->config & ATH_MCI_CONFIG_DISABLE_OSLA))
|
|
ar9003_mci_osla_setup(ah, true);
|
|
|
|
if (AR_SREV_9462(ah))
|
|
REG_WRITE(ah, AR_SELFGEN_MASK, 0x02);
|
|
} else {
|
|
ar9003_mci_send_lna_take(ah, true);
|
|
udelay(5);
|
|
|
|
REG_SET_BIT(ah, AR_MCI_TX_CTRL,
|
|
AR_MCI_TX_CTRL_DISABLE_LNA_UPDATE);
|
|
REG_SET_BIT(ah, AR_PHY_GLB_CONTROL,
|
|
AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
|
|
|
|
ar9003_mci_osla_setup(ah, false);
|
|
ar9003_mci_send_2g5g_status(ah, true);
|
|
}
|
|
}
|
|
|
|
bool ar9003_mci_send_message(struct ath_hw *ah, u8 header, u32 flag,
|
|
u32 *payload, u8 len, bool wait_done,
|
|
bool check_bt)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
bool msg_sent = false;
|
|
u32 regval;
|
|
u32 saved_mci_int_en;
|
|
int i;
|
|
|
|
saved_mci_int_en = REG_READ(ah, AR_MCI_INTERRUPT_EN);
|
|
regval = REG_READ(ah, AR_BTCOEX_CTRL);
|
|
|
|
if ((regval == 0xdeadbeef) || !(regval & AR_BTCOEX_CTRL_MCI_MODE_EN)) {
|
|
ath_dbg(common, MCI,
|
|
"MCI Not sending 0x%x. MCI is not enabled. full_sleep = %d\n",
|
|
header, (ah->power_mode == ATH9K_PM_FULL_SLEEP) ? 1 : 0);
|
|
ar9003_mci_queue_unsent_gpm(ah, header, payload, true);
|
|
return false;
|
|
} else if (check_bt && (mci->bt_state == MCI_BT_SLEEP)) {
|
|
ath_dbg(common, MCI,
|
|
"MCI Don't send message 0x%x. BT is in sleep state\n",
|
|
header);
|
|
ar9003_mci_queue_unsent_gpm(ah, header, payload, true);
|
|
return false;
|
|
}
|
|
|
|
if (wait_done)
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_EN, 0);
|
|
|
|
/* Need to clear SW_MSG_DONE raw bit before wait */
|
|
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RAW,
|
|
(AR_MCI_INTERRUPT_SW_MSG_DONE |
|
|
AR_MCI_INTERRUPT_MSG_FAIL_MASK));
|
|
|
|
if (payload) {
|
|
for (i = 0; (i * 4) < len; i++)
|
|
REG_WRITE(ah, (AR_MCI_TX_PAYLOAD0 + i * 4),
|
|
*(payload + i));
|
|
}
|
|
|
|
REG_WRITE(ah, AR_MCI_COMMAND0,
|
|
(SM((flag & MCI_FLAG_DISABLE_TIMESTAMP),
|
|
AR_MCI_COMMAND0_DISABLE_TIMESTAMP) |
|
|
SM(len, AR_MCI_COMMAND0_LEN) |
|
|
SM(header, AR_MCI_COMMAND0_HEADER)));
|
|
|
|
if (wait_done &&
|
|
!(ar9003_mci_wait_for_interrupt(ah, AR_MCI_INTERRUPT_RAW,
|
|
AR_MCI_INTERRUPT_SW_MSG_DONE, 500)))
|
|
ar9003_mci_queue_unsent_gpm(ah, header, payload, true);
|
|
else {
|
|
ar9003_mci_queue_unsent_gpm(ah, header, payload, false);
|
|
msg_sent = true;
|
|
}
|
|
|
|
if (wait_done)
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_EN, saved_mci_int_en);
|
|
|
|
return msg_sent;
|
|
}
|
|
EXPORT_SYMBOL(ar9003_mci_send_message);
|
|
|
|
void ar9003_mci_init_cal_req(struct ath_hw *ah, bool *is_reusable)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
|
|
u32 pld[4] = {0, 0, 0, 0};
|
|
|
|
if ((mci_hw->bt_state != MCI_BT_AWAKE) ||
|
|
(mci_hw->config & ATH_MCI_CONFIG_DISABLE_MCI_CAL))
|
|
return;
|
|
|
|
MCI_GPM_SET_CAL_TYPE(pld, MCI_GPM_WLAN_CAL_REQ);
|
|
pld[MCI_GPM_WLAN_CAL_W_SEQUENCE] = mci_hw->wlan_cal_seq++;
|
|
|
|
ar9003_mci_send_message(ah, MCI_GPM, 0, pld, 16, true, false);
|
|
|
|
if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_GRANT, 0, 50000)) {
|
|
ath_dbg(common, MCI, "MCI BT_CAL_GRANT received\n");
|
|
} else {
|
|
*is_reusable = false;
|
|
ath_dbg(common, MCI, "MCI BT_CAL_GRANT not received\n");
|
|
}
|
|
}
|
|
|
|
void ar9003_mci_init_cal_done(struct ath_hw *ah)
|
|
{
|
|
struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
|
|
u32 pld[4] = {0, 0, 0, 0};
|
|
|
|
if ((mci_hw->bt_state != MCI_BT_AWAKE) ||
|
|
(mci_hw->config & ATH_MCI_CONFIG_DISABLE_MCI_CAL))
|
|
return;
|
|
|
|
MCI_GPM_SET_CAL_TYPE(pld, MCI_GPM_WLAN_CAL_DONE);
|
|
pld[MCI_GPM_WLAN_CAL_W_SEQUENCE] = mci_hw->wlan_cal_done++;
|
|
ar9003_mci_send_message(ah, MCI_GPM, 0, pld, 16, true, false);
|
|
}
|
|
|
|
int ar9003_mci_setup(struct ath_hw *ah, u32 gpm_addr, void *gpm_buf,
|
|
u16 len, u32 sched_addr)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
mci->gpm_addr = gpm_addr;
|
|
mci->gpm_buf = gpm_buf;
|
|
mci->gpm_len = len;
|
|
mci->sched_addr = sched_addr;
|
|
|
|
return ar9003_mci_reset(ah, true, true, true);
|
|
}
|
|
EXPORT_SYMBOL(ar9003_mci_setup);
|
|
|
|
void ar9003_mci_cleanup(struct ath_hw *ah)
|
|
{
|
|
/* Turn off MCI and Jupiter mode. */
|
|
REG_WRITE(ah, AR_BTCOEX_CTRL, 0x00);
|
|
ar9003_mci_disable_interrupt(ah);
|
|
}
|
|
EXPORT_SYMBOL(ar9003_mci_cleanup);
|
|
|
|
u32 ar9003_mci_state(struct ath_hw *ah, u32 state_type)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 value = 0, tsf;
|
|
u8 query_type;
|
|
|
|
switch (state_type) {
|
|
case MCI_STATE_ENABLE:
|
|
if (mci->ready) {
|
|
value = REG_READ(ah, AR_BTCOEX_CTRL);
|
|
|
|
if ((value == 0xdeadbeef) || (value == 0xffffffff))
|
|
value = 0;
|
|
}
|
|
value &= AR_BTCOEX_CTRL_MCI_MODE_EN;
|
|
break;
|
|
case MCI_STATE_INIT_GPM_OFFSET:
|
|
value = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
|
|
|
|
if (value < mci->gpm_len)
|
|
mci->gpm_idx = value;
|
|
else
|
|
mci->gpm_idx = 0;
|
|
break;
|
|
case MCI_STATE_LAST_SCHD_MSG_OFFSET:
|
|
value = MS(REG_READ(ah, AR_MCI_RX_STATUS),
|
|
AR_MCI_RX_LAST_SCHD_MSG_INDEX);
|
|
/* Make it in bytes */
|
|
value <<= 4;
|
|
break;
|
|
case MCI_STATE_REMOTE_SLEEP:
|
|
value = MS(REG_READ(ah, AR_MCI_RX_STATUS),
|
|
AR_MCI_RX_REMOTE_SLEEP) ?
|
|
MCI_BT_SLEEP : MCI_BT_AWAKE;
|
|
break;
|
|
case MCI_STATE_SET_BT_AWAKE:
|
|
mci->bt_state = MCI_BT_AWAKE;
|
|
ar9003_mci_send_coex_version_query(ah, true);
|
|
ar9003_mci_send_coex_wlan_channels(ah, true);
|
|
|
|
if (mci->unhalt_bt_gpm)
|
|
ar9003_mci_send_coex_halt_bt_gpm(ah, false, true);
|
|
|
|
ar9003_mci_2g5g_switch(ah, false);
|
|
break;
|
|
case MCI_STATE_RESET_REQ_WAKE:
|
|
ar9003_mci_reset_req_wakeup(ah);
|
|
mci->update_2g5g = true;
|
|
|
|
if (mci->config & ATH_MCI_CONFIG_MCI_OBS_MASK) {
|
|
/* Check if we still have control of the GPIOs */
|
|
if ((REG_READ(ah, AR_GLB_GPIO_CONTROL) &
|
|
ATH_MCI_CONFIG_MCI_OBS_GPIO) !=
|
|
ATH_MCI_CONFIG_MCI_OBS_GPIO) {
|
|
ar9003_mci_observation_set_up(ah);
|
|
}
|
|
}
|
|
break;
|
|
case MCI_STATE_SEND_WLAN_COEX_VERSION:
|
|
ar9003_mci_send_coex_version_response(ah, true);
|
|
break;
|
|
case MCI_STATE_SEND_VERSION_QUERY:
|
|
ar9003_mci_send_coex_version_query(ah, true);
|
|
break;
|
|
case MCI_STATE_SEND_STATUS_QUERY:
|
|
query_type = MCI_GPM_COEX_QUERY_BT_TOPOLOGY;
|
|
ar9003_mci_send_coex_bt_status_query(ah, true, query_type);
|
|
break;
|
|
case MCI_STATE_RECOVER_RX:
|
|
tsf = ath9k_hw_gettsf32(ah);
|
|
if ((tsf - mci->last_recovery) <= MCI_RECOVERY_DUR_TSF) {
|
|
ath_dbg(ath9k_hw_common(ah), MCI,
|
|
"(MCI) ignore Rx recovery\n");
|
|
break;
|
|
}
|
|
ath_dbg(ath9k_hw_common(ah), MCI, "(MCI) RECOVER RX\n");
|
|
mci->last_recovery = tsf;
|
|
ar9003_mci_prep_interface(ah);
|
|
mci->query_bt = true;
|
|
mci->need_flush_btinfo = true;
|
|
ar9003_mci_send_coex_wlan_channels(ah, true);
|
|
ar9003_mci_2g5g_switch(ah, false);
|
|
break;
|
|
case MCI_STATE_NEED_FTP_STOMP:
|
|
value = !(mci->config & ATH_MCI_CONFIG_DISABLE_FTP_STOMP);
|
|
break;
|
|
case MCI_STATE_NEED_FLUSH_BT_INFO:
|
|
value = (!mci->unhalt_bt_gpm && mci->need_flush_btinfo) ? 1 : 0;
|
|
mci->need_flush_btinfo = false;
|
|
break;
|
|
case MCI_STATE_AIC_CAL:
|
|
if (ath9k_hw_is_aic_enabled(ah))
|
|
value = ar9003_aic_calibration(ah);
|
|
break;
|
|
case MCI_STATE_AIC_START:
|
|
if (ath9k_hw_is_aic_enabled(ah))
|
|
ar9003_aic_start_normal(ah);
|
|
break;
|
|
case MCI_STATE_AIC_CAL_RESET:
|
|
if (ath9k_hw_is_aic_enabled(ah))
|
|
value = ar9003_aic_cal_reset(ah);
|
|
break;
|
|
case MCI_STATE_AIC_CAL_SINGLE:
|
|
if (ath9k_hw_is_aic_enabled(ah))
|
|
value = ar9003_aic_calibration_single(ah);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return value;
|
|
}
|
|
EXPORT_SYMBOL(ar9003_mci_state);
|
|
|
|
void ar9003_mci_bt_gain_ctrl(struct ath_hw *ah)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
ath_dbg(common, MCI, "Give LNA and SPDT control to BT\n");
|
|
|
|
ar9003_mci_send_lna_take(ah, true);
|
|
udelay(50);
|
|
|
|
REG_SET_BIT(ah, AR_PHY_GLB_CONTROL, AR_BTCOEX_CTRL_BT_OWN_SPDT_CTRL);
|
|
mci->is_2g = false;
|
|
mci->update_2g5g = true;
|
|
ar9003_mci_send_2g5g_status(ah, true);
|
|
|
|
/* Force another 2g5g update at next scanning */
|
|
mci->update_2g5g = true;
|
|
}
|
|
|
|
void ar9003_mci_set_power_awake(struct ath_hw *ah)
|
|
{
|
|
u32 btcoex_ctrl2, diag_sw;
|
|
int i;
|
|
u8 lna_ctrl, bt_sleep;
|
|
|
|
for (i = 0; i < AH_WAIT_TIMEOUT; i++) {
|
|
btcoex_ctrl2 = REG_READ(ah, AR_BTCOEX_CTRL2);
|
|
if (btcoex_ctrl2 != 0xdeadbeef)
|
|
break;
|
|
udelay(AH_TIME_QUANTUM);
|
|
}
|
|
REG_WRITE(ah, AR_BTCOEX_CTRL2, (btcoex_ctrl2 | BIT(23)));
|
|
|
|
for (i = 0; i < AH_WAIT_TIMEOUT; i++) {
|
|
diag_sw = REG_READ(ah, AR_DIAG_SW);
|
|
if (diag_sw != 0xdeadbeef)
|
|
break;
|
|
udelay(AH_TIME_QUANTUM);
|
|
}
|
|
REG_WRITE(ah, AR_DIAG_SW, (diag_sw | BIT(27) | BIT(19) | BIT(18)));
|
|
lna_ctrl = REG_READ(ah, AR_OBS_BUS_CTRL) & 0x3;
|
|
bt_sleep = MS(REG_READ(ah, AR_MCI_RX_STATUS), AR_MCI_RX_REMOTE_SLEEP);
|
|
|
|
REG_WRITE(ah, AR_BTCOEX_CTRL2, btcoex_ctrl2);
|
|
REG_WRITE(ah, AR_DIAG_SW, diag_sw);
|
|
|
|
if (bt_sleep && (lna_ctrl == 2)) {
|
|
REG_SET_BIT(ah, AR_BTCOEX_RC, 0x1);
|
|
REG_CLR_BIT(ah, AR_BTCOEX_RC, 0x1);
|
|
udelay(50);
|
|
}
|
|
}
|
|
|
|
void ar9003_mci_check_gpm_offset(struct ath_hw *ah)
|
|
{
|
|
struct ath_common *common = ath9k_hw_common(ah);
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 offset;
|
|
|
|
/*
|
|
* This should only be called before "MAC Warm Reset" or "MCI Reset Rx".
|
|
*/
|
|
offset = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
|
|
if (mci->gpm_idx == offset)
|
|
return;
|
|
ath_dbg(common, MCI, "GPM cached write pointer mismatch %d %d\n",
|
|
mci->gpm_idx, offset);
|
|
mci->query_bt = true;
|
|
mci->need_flush_btinfo = true;
|
|
mci->gpm_idx = 0;
|
|
}
|
|
|
|
u32 ar9003_mci_get_next_gpm_offset(struct ath_hw *ah, u32 *more)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
u32 offset, more_gpm = 0, gpm_ptr;
|
|
|
|
/*
|
|
* This could be useful to avoid new GPM message interrupt which
|
|
* may lead to spurious interrupt after power sleep, or multiple
|
|
* entry of ath_mci_intr().
|
|
* Adding empty GPM check by returning HAL_MCI_GPM_INVALID can
|
|
* alleviate this effect, but clearing GPM RX interrupt bit is
|
|
* safe, because whether this is called from hw or driver code
|
|
* there must be an interrupt bit set/triggered initially
|
|
*/
|
|
REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
|
|
AR_MCI_INTERRUPT_RX_MSG_GPM);
|
|
|
|
gpm_ptr = MS(REG_READ(ah, AR_MCI_GPM_1), AR_MCI_GPM_WRITE_PTR);
|
|
offset = gpm_ptr;
|
|
|
|
if (!offset)
|
|
offset = mci->gpm_len - 1;
|
|
else if (offset >= mci->gpm_len) {
|
|
if (offset != 0xFFFF)
|
|
offset = 0;
|
|
} else {
|
|
offset--;
|
|
}
|
|
|
|
if ((offset == 0xFFFF) || (gpm_ptr == mci->gpm_idx)) {
|
|
offset = MCI_GPM_INVALID;
|
|
more_gpm = MCI_GPM_NOMORE;
|
|
goto out;
|
|
}
|
|
for (;;) {
|
|
u32 temp_index;
|
|
|
|
/* skip reserved GPM if any */
|
|
|
|
if (offset != mci->gpm_idx)
|
|
more_gpm = MCI_GPM_MORE;
|
|
else
|
|
more_gpm = MCI_GPM_NOMORE;
|
|
|
|
temp_index = mci->gpm_idx;
|
|
|
|
if (temp_index >= mci->gpm_len)
|
|
temp_index = 0;
|
|
|
|
mci->gpm_idx++;
|
|
|
|
if (mci->gpm_idx >= mci->gpm_len)
|
|
mci->gpm_idx = 0;
|
|
|
|
if (ar9003_mci_is_gpm_valid(ah, temp_index)) {
|
|
offset = temp_index;
|
|
break;
|
|
}
|
|
|
|
if (more_gpm == MCI_GPM_NOMORE) {
|
|
offset = MCI_GPM_INVALID;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (offset != MCI_GPM_INVALID)
|
|
offset <<= 4;
|
|
out:
|
|
if (more)
|
|
*more = more_gpm;
|
|
|
|
return offset;
|
|
}
|
|
EXPORT_SYMBOL(ar9003_mci_get_next_gpm_offset);
|
|
|
|
void ar9003_mci_set_bt_version(struct ath_hw *ah, u8 major, u8 minor)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
mci->bt_ver_major = major;
|
|
mci->bt_ver_minor = minor;
|
|
mci->bt_version_known = true;
|
|
ath_dbg(ath9k_hw_common(ah), MCI, "MCI BT version set: %d.%d\n",
|
|
mci->bt_ver_major, mci->bt_ver_minor);
|
|
}
|
|
EXPORT_SYMBOL(ar9003_mci_set_bt_version);
|
|
|
|
void ar9003_mci_send_wlan_channels(struct ath_hw *ah)
|
|
{
|
|
struct ath9k_hw_mci *mci = &ah->btcoex_hw.mci;
|
|
|
|
mci->wlan_channels_update = true;
|
|
ar9003_mci_send_coex_wlan_channels(ah, true);
|
|
}
|
|
EXPORT_SYMBOL(ar9003_mci_send_wlan_channels);
|
|
|
|
u16 ar9003_mci_get_max_txpower(struct ath_hw *ah, u8 ctlmode)
|
|
{
|
|
if (!ah->btcoex_hw.mci.concur_tx)
|
|
goto out;
|
|
|
|
if (ctlmode == CTL_2GHT20)
|
|
return ATH_BTCOEX_HT20_MAX_TXPOWER;
|
|
else if (ctlmode == CTL_2GHT40)
|
|
return ATH_BTCOEX_HT40_MAX_TXPOWER;
|
|
|
|
out:
|
|
return -1;
|
|
}
|