419 lines
15 KiB
C
419 lines
15 KiB
C
/******************************************************************************
|
|
*
|
|
* This file is provided under a dual BSD/GPLv2 license. When using or
|
|
* redistributing this file, you may do so under either license.
|
|
*
|
|
* GPL LICENSE SUMMARY
|
|
*
|
|
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
|
|
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
|
|
* Copyright(c) 2016 Intel Deutschland GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
|
|
* USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution
|
|
* in the file called COPYING.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <linuxwifi@intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
* BSD LICENSE
|
|
*
|
|
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
|
|
* Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
|
|
* Copyright(c) 2016 Intel Deutschland GmbH
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* * Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in
|
|
* the documentation and/or other materials provided with the
|
|
* distribution.
|
|
* * Neither the name Intel Corporation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*****************************************************************************/
|
|
|
|
#ifndef __iwl_prph_h__
|
|
#define __iwl_prph_h__
|
|
|
|
/*
|
|
* Registers in this file are internal, not PCI bus memory mapped.
|
|
* Driver accesses these via HBUS_TARG_PRPH_* registers.
|
|
*/
|
|
#define PRPH_BASE (0x00000)
|
|
#define PRPH_END (0xFFFFF)
|
|
|
|
/* APMG (power management) constants */
|
|
#define APMG_BASE (PRPH_BASE + 0x3000)
|
|
#define APMG_CLK_CTRL_REG (APMG_BASE + 0x0000)
|
|
#define APMG_CLK_EN_REG (APMG_BASE + 0x0004)
|
|
#define APMG_CLK_DIS_REG (APMG_BASE + 0x0008)
|
|
#define APMG_PS_CTRL_REG (APMG_BASE + 0x000c)
|
|
#define APMG_PCIDEV_STT_REG (APMG_BASE + 0x0010)
|
|
#define APMG_RFKILL_REG (APMG_BASE + 0x0014)
|
|
#define APMG_RTC_INT_STT_REG (APMG_BASE + 0x001c)
|
|
#define APMG_RTC_INT_MSK_REG (APMG_BASE + 0x0020)
|
|
#define APMG_DIGITAL_SVR_REG (APMG_BASE + 0x0058)
|
|
#define APMG_ANALOG_SVR_REG (APMG_BASE + 0x006C)
|
|
|
|
#define APMS_CLK_VAL_MRB_FUNC_MODE (0x00000001)
|
|
#define APMG_CLK_VAL_DMA_CLK_RQT (0x00000200)
|
|
#define APMG_CLK_VAL_BSM_CLK_RQT (0x00000800)
|
|
|
|
#define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS (0x00400000)
|
|
#define APMG_PS_CTRL_VAL_RESET_REQ (0x04000000)
|
|
#define APMG_PS_CTRL_MSK_PWR_SRC (0x03000000)
|
|
#define APMG_PS_CTRL_VAL_PWR_SRC_VMAIN (0x00000000)
|
|
#define APMG_PS_CTRL_VAL_PWR_SRC_VAUX (0x02000000)
|
|
#define APMG_SVR_VOLTAGE_CONFIG_BIT_MSK (0x000001E0) /* bit 8:5 */
|
|
#define APMG_SVR_DIGITAL_VOLTAGE_1_32 (0x00000060)
|
|
|
|
#define APMG_PCIDEV_STT_VAL_PERSIST_DIS (0x00000200)
|
|
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
|
|
#define APMG_PCIDEV_STT_VAL_WAKE_ME (0x00004000)
|
|
|
|
#define APMG_RTC_INT_STT_RFKILL (0x10000000)
|
|
|
|
/* Device system time */
|
|
#define DEVICE_SYSTEM_TIME_REG 0xA0206C
|
|
|
|
/* Device NMI register */
|
|
#define DEVICE_SET_NMI_REG 0x00a01c30
|
|
#define DEVICE_SET_NMI_VAL_HW BIT(0)
|
|
#define DEVICE_SET_NMI_VAL_DRV BIT(7)
|
|
#define DEVICE_SET_NMI_8000_REG 0x00a01c24
|
|
#define DEVICE_SET_NMI_8000_VAL 0x1000000
|
|
|
|
/* Shared registers (0x0..0x3ff, via target indirect or periphery */
|
|
#define SHR_BASE 0x00a10000
|
|
|
|
/* Shared GP1 register */
|
|
#define SHR_APMG_GP1_REG 0x01dc
|
|
#define SHR_APMG_GP1_REG_PRPH (SHR_BASE + SHR_APMG_GP1_REG)
|
|
#define SHR_APMG_GP1_WF_XTAL_LP_EN 0x00000004
|
|
#define SHR_APMG_GP1_CHICKEN_BIT_SELECT 0x80000000
|
|
|
|
/* Shared DL_CFG register */
|
|
#define SHR_APMG_DL_CFG_REG 0x01c4
|
|
#define SHR_APMG_DL_CFG_REG_PRPH (SHR_BASE + SHR_APMG_DL_CFG_REG)
|
|
#define SHR_APMG_DL_CFG_RTCS_CLK_SELECTOR_MSK 0x000000c0
|
|
#define SHR_APMG_DL_CFG_RTCS_CLK_INTERNAL_XTAL 0x00000080
|
|
#define SHR_APMG_DL_CFG_DL_CLOCK_POWER_UP 0x00000100
|
|
|
|
/* Shared APMG_XTAL_CFG register */
|
|
#define SHR_APMG_XTAL_CFG_REG 0x1c0
|
|
#define SHR_APMG_XTAL_CFG_XTAL_ON_REQ 0x80000000
|
|
|
|
/*
|
|
* Device reset for family 8000
|
|
* write to bit 24 in order to reset the CPU
|
|
*/
|
|
#define RELEASE_CPU_RESET (0x300C)
|
|
#define RELEASE_CPU_RESET_BIT BIT(24)
|
|
|
|
/*****************************************************************************
|
|
* 7000/3000 series SHR DTS addresses *
|
|
*****************************************************************************/
|
|
|
|
#define SHR_MISC_WFM_DTS_EN (0x00a10024)
|
|
#define DTSC_CFG_MODE (0x00a10604)
|
|
#define DTSC_VREF_AVG (0x00a10648)
|
|
#define DTSC_VREF5_AVG (0x00a1064c)
|
|
#define DTSC_CFG_MODE_PERIODIC (0x2)
|
|
#define DTSC_PTAT_AVG (0x00a10650)
|
|
|
|
|
|
/**
|
|
* Tx Scheduler
|
|
*
|
|
* The Tx Scheduler selects the next frame to be transmitted, choosing TFDs
|
|
* (Transmit Frame Descriptors) from up to 16 circular Tx queues resident in
|
|
* host DRAM. It steers each frame's Tx command (which contains the frame
|
|
* data) into one of up to 7 prioritized Tx DMA FIFO channels within the
|
|
* device. A queue maps to only one (selectable by driver) Tx DMA channel,
|
|
* but one DMA channel may take input from several queues.
|
|
*
|
|
* Tx DMA FIFOs have dedicated purposes.
|
|
*
|
|
* For 5000 series and up, they are used differently
|
|
* (cf. iwl5000_default_queue_to_tx_fifo in iwl-5000.c):
|
|
*
|
|
* 0 -- EDCA BK (background) frames, lowest priority
|
|
* 1 -- EDCA BE (best effort) frames, normal priority
|
|
* 2 -- EDCA VI (video) frames, higher priority
|
|
* 3 -- EDCA VO (voice) and management frames, highest priority
|
|
* 4 -- unused
|
|
* 5 -- unused
|
|
* 6 -- unused
|
|
* 7 -- Commands
|
|
*
|
|
* Driver should normally map queues 0-6 to Tx DMA/FIFO channels 0-6.
|
|
* In addition, driver can map the remaining queues to Tx DMA/FIFO
|
|
* channels 0-3 to support 11n aggregation via EDCA DMA channels.
|
|
*
|
|
* The driver sets up each queue to work in one of two modes:
|
|
*
|
|
* 1) Scheduler-Ack, in which the scheduler automatically supports a
|
|
* block-ack (BA) window of up to 64 TFDs. In this mode, each queue
|
|
* contains TFDs for a unique combination of Recipient Address (RA)
|
|
* and Traffic Identifier (TID), that is, traffic of a given
|
|
* Quality-Of-Service (QOS) priority, destined for a single station.
|
|
*
|
|
* In scheduler-ack mode, the scheduler keeps track of the Tx status of
|
|
* each frame within the BA window, including whether it's been transmitted,
|
|
* and whether it's been acknowledged by the receiving station. The device
|
|
* automatically processes block-acks received from the receiving STA,
|
|
* and reschedules un-acked frames to be retransmitted (successful
|
|
* Tx completion may end up being out-of-order).
|
|
*
|
|
* The driver must maintain the queue's Byte Count table in host DRAM
|
|
* for this mode.
|
|
* This mode does not support fragmentation.
|
|
*
|
|
* 2) FIFO (a.k.a. non-Scheduler-ACK), in which each TFD is processed in order.
|
|
* The device may automatically retry Tx, but will retry only one frame
|
|
* at a time, until receiving ACK from receiving station, or reaching
|
|
* retry limit and giving up.
|
|
*
|
|
* The command queue (#4/#9) must use this mode!
|
|
* This mode does not require use of the Byte Count table in host DRAM.
|
|
*
|
|
* Driver controls scheduler operation via 3 means:
|
|
* 1) Scheduler registers
|
|
* 2) Shared scheduler data base in internal SRAM
|
|
* 3) Shared data in host DRAM
|
|
*
|
|
* Initialization:
|
|
*
|
|
* When loading, driver should allocate memory for:
|
|
* 1) 16 TFD circular buffers, each with space for (typically) 256 TFDs.
|
|
* 2) 16 Byte Count circular buffers in 16 KBytes contiguous memory
|
|
* (1024 bytes for each queue).
|
|
*
|
|
* After receiving "Alive" response from uCode, driver must initialize
|
|
* the scheduler (especially for queue #4/#9, the command queue, otherwise
|
|
* the driver can't issue commands!):
|
|
*/
|
|
#define SCD_MEM_LOWER_BOUND (0x0000)
|
|
|
|
/**
|
|
* Max Tx window size is the max number of contiguous TFDs that the scheduler
|
|
* can keep track of at one time when creating block-ack chains of frames.
|
|
* Note that "64" matches the number of ack bits in a block-ack packet.
|
|
*/
|
|
#define SCD_WIN_SIZE 64
|
|
#define SCD_FRAME_LIMIT 64
|
|
|
|
#define SCD_TXFIFO_POS_TID (0)
|
|
#define SCD_TXFIFO_POS_RA (4)
|
|
#define SCD_QUEUE_RA_TID_MAP_RATID_MSK (0x01FF)
|
|
|
|
/* agn SCD */
|
|
#define SCD_QUEUE_STTS_REG_POS_TXF (0)
|
|
#define SCD_QUEUE_STTS_REG_POS_ACTIVE (3)
|
|
#define SCD_QUEUE_STTS_REG_POS_WSL (4)
|
|
#define SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN (19)
|
|
#define SCD_QUEUE_STTS_REG_MSK (0x017F0000)
|
|
|
|
#define SCD_QUEUE_CTX_REG1_CREDIT_POS (8)
|
|
#define SCD_QUEUE_CTX_REG1_CREDIT_MSK (0x00FFFF00)
|
|
#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_POS (24)
|
|
#define SCD_QUEUE_CTX_REG1_SUPER_CREDIT_MSK (0xFF000000)
|
|
#define SCD_QUEUE_CTX_REG2_WIN_SIZE_POS (0)
|
|
#define SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK (0x0000007F)
|
|
#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS (16)
|
|
#define SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK (0x007F0000)
|
|
#define SCD_GP_CTRL_ENABLE_31_QUEUES BIT(0)
|
|
#define SCD_GP_CTRL_AUTO_ACTIVE_MODE BIT(18)
|
|
|
|
/* Context Data */
|
|
#define SCD_CONTEXT_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x600)
|
|
#define SCD_CONTEXT_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0)
|
|
|
|
/* Tx status */
|
|
#define SCD_TX_STTS_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x6A0)
|
|
#define SCD_TX_STTS_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0)
|
|
|
|
/* Translation Data */
|
|
#define SCD_TRANS_TBL_MEM_LOWER_BOUND (SCD_MEM_LOWER_BOUND + 0x7E0)
|
|
#define SCD_TRANS_TBL_MEM_UPPER_BOUND (SCD_MEM_LOWER_BOUND + 0x808)
|
|
|
|
#define SCD_CONTEXT_QUEUE_OFFSET(x)\
|
|
(SCD_CONTEXT_MEM_LOWER_BOUND + ((x) * 8))
|
|
|
|
#define SCD_TX_STTS_QUEUE_OFFSET(x)\
|
|
(SCD_TX_STTS_MEM_LOWER_BOUND + ((x) * 16))
|
|
|
|
#define SCD_TRANS_TBL_OFFSET_QUEUE(x) \
|
|
((SCD_TRANS_TBL_MEM_LOWER_BOUND + ((x) * 2)) & 0xfffc)
|
|
|
|
#define SCD_BASE (PRPH_BASE + 0xa02c00)
|
|
|
|
#define SCD_SRAM_BASE_ADDR (SCD_BASE + 0x0)
|
|
#define SCD_DRAM_BASE_ADDR (SCD_BASE + 0x8)
|
|
#define SCD_AIT (SCD_BASE + 0x0c)
|
|
#define SCD_TXFACT (SCD_BASE + 0x10)
|
|
#define SCD_ACTIVE (SCD_BASE + 0x14)
|
|
#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8)
|
|
#define SCD_CHAINEXT_EN (SCD_BASE + 0x244)
|
|
#define SCD_AGGR_SEL (SCD_BASE + 0x248)
|
|
#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108)
|
|
#define SCD_GP_CTRL (SCD_BASE + 0x1a8)
|
|
#define SCD_EN_CTRL (SCD_BASE + 0x254)
|
|
|
|
/*********************** END TX SCHEDULER *************************************/
|
|
|
|
/* tcp checksum offload */
|
|
#define RX_EN_CSUM (0x00a00d88)
|
|
|
|
/* Oscillator clock */
|
|
#define OSC_CLK (0xa04068)
|
|
#define OSC_CLK_FORCE_CONTROL (0x8)
|
|
|
|
#define FH_UCODE_LOAD_STATUS (0x1AF0)
|
|
|
|
/*
|
|
* Replacing FH_UCODE_LOAD_STATUS
|
|
* This register is writen by driver and is read by uCode during boot flow.
|
|
* Note this address is cleared after MAC reset.
|
|
*/
|
|
#define UREG_UCODE_LOAD_STATUS (0xa05c40)
|
|
|
|
#define LMPM_SECURE_UCODE_LOAD_CPU1_HDR_ADDR (0x1E78)
|
|
#define LMPM_SECURE_UCODE_LOAD_CPU2_HDR_ADDR (0x1E7C)
|
|
|
|
#define LMPM_SECURE_CPU1_HDR_MEM_SPACE (0x420000)
|
|
#define LMPM_SECURE_CPU2_HDR_MEM_SPACE (0x420400)
|
|
|
|
/* Rx FIFO */
|
|
#define RXF_SIZE_ADDR (0xa00c88)
|
|
#define RXF_RD_D_SPACE (0xa00c40)
|
|
#define RXF_RD_WR_PTR (0xa00c50)
|
|
#define RXF_RD_RD_PTR (0xa00c54)
|
|
#define RXF_RD_FENCE_PTR (0xa00c4c)
|
|
#define RXF_SET_FENCE_MODE (0xa00c14)
|
|
#define RXF_LD_WR2FENCE (0xa00c1c)
|
|
#define RXF_FIFO_RD_FENCE_INC (0xa00c68)
|
|
#define RXF_SIZE_BYTE_CND_POS (7)
|
|
#define RXF_SIZE_BYTE_CNT_MSK (0x3ff << RXF_SIZE_BYTE_CND_POS)
|
|
#define RXF_DIFF_FROM_PREV (0x200)
|
|
|
|
#define RXF_LD_FENCE_OFFSET_ADDR (0xa00c10)
|
|
#define RXF_FIFO_RD_FENCE_ADDR (0xa00c0c)
|
|
|
|
/* Tx FIFO */
|
|
#define TXF_FIFO_ITEM_CNT (0xa00438)
|
|
#define TXF_WR_PTR (0xa00414)
|
|
#define TXF_RD_PTR (0xa00410)
|
|
#define TXF_FENCE_PTR (0xa00418)
|
|
#define TXF_LOCK_FENCE (0xa00424)
|
|
#define TXF_LARC_NUM (0xa0043c)
|
|
#define TXF_READ_MODIFY_DATA (0xa00448)
|
|
#define TXF_READ_MODIFY_ADDR (0xa0044c)
|
|
|
|
/* UMAC Internal Tx Fifo */
|
|
#define TXF_CPU2_FIFO_ITEM_CNT (0xA00538)
|
|
#define TXF_CPU2_WR_PTR (0xA00514)
|
|
#define TXF_CPU2_RD_PTR (0xA00510)
|
|
#define TXF_CPU2_FENCE_PTR (0xA00518)
|
|
#define TXF_CPU2_LOCK_FENCE (0xA00524)
|
|
#define TXF_CPU2_NUM (0xA0053C)
|
|
#define TXF_CPU2_READ_MODIFY_DATA (0xA00548)
|
|
#define TXF_CPU2_READ_MODIFY_ADDR (0xA0054C)
|
|
|
|
/* Radio registers access */
|
|
#define RSP_RADIO_CMD (0xa02804)
|
|
#define RSP_RADIO_RDDAT (0xa02814)
|
|
#define RADIO_RSP_ADDR_POS (6)
|
|
#define RADIO_RSP_RD_CMD (3)
|
|
|
|
/* FW monitor */
|
|
#define MON_BUFF_SAMPLE_CTL (0xa03c00)
|
|
#define MON_BUFF_BASE_ADDR (0xa03c3c)
|
|
#define MON_BUFF_END_ADDR (0xa03c40)
|
|
#define MON_BUFF_WRPTR (0xa03c44)
|
|
#define MON_BUFF_CYCLE_CNT (0xa03c48)
|
|
|
|
#define MON_DMARB_RD_CTL_ADDR (0xa03c60)
|
|
#define MON_DMARB_RD_DATA_ADDR (0xa03c5c)
|
|
|
|
#define DBGC_IN_SAMPLE (0xa03c00)
|
|
#define DBGC_OUT_CTRL (0xa03c0c)
|
|
|
|
/* enable the ID buf for read */
|
|
#define WFPM_PS_CTL_CLR 0xA0300C
|
|
#define WFMP_MAC_ADDR_0 0xA03080
|
|
#define WFMP_MAC_ADDR_1 0xA03084
|
|
#define LMPM_PMG_EN 0xA01CEC
|
|
#define RADIO_REG_SYS_MANUAL_DFT_0 0xAD4078
|
|
#define RFIC_REG_RD 0xAD0470
|
|
#define WFPM_CTRL_REG 0xA03030
|
|
enum {
|
|
ENABLE_WFPM = BIT(31),
|
|
WFPM_AUX_CTL_AUX_IF_MAC_OWNER_MSK = 0x80000000,
|
|
};
|
|
|
|
#define AUX_MISC_REG 0xA200B0
|
|
enum {
|
|
HW_STEP_LOCATION_BITS = 24,
|
|
};
|
|
|
|
#define AUX_MISC_MASTER1_EN 0xA20818
|
|
enum aux_misc_master1_en {
|
|
AUX_MISC_MASTER1_EN_SBE_MSK = 0x1,
|
|
};
|
|
|
|
#define AUX_MISC_MASTER1_SMPHR_STATUS 0xA20800
|
|
#define RSA_ENABLE 0xA24B08
|
|
#define PREG_AUX_BUS_WPROT_0 0xA04CC0
|
|
#define SB_CPU_1_STATUS 0xA01E30
|
|
#define SB_CPU_2_STATUS 0xA01E34
|
|
|
|
/* FW chicken bits */
|
|
#define LMPM_CHICK 0xA01FF8
|
|
enum {
|
|
LMPM_CHICK_EXTENDED_ADDR_SPACE = BIT(0),
|
|
};
|
|
|
|
/* FW chicken bits */
|
|
#define LMPM_PAGE_PASS_NOTIF 0xA03824
|
|
enum {
|
|
LMPM_PAGE_PASS_NOTIF_POS = BIT(20),
|
|
};
|
|
|
|
#define UREG_CHICK (0xA05C00)
|
|
#define UREG_CHICK_MSI_ENABLE BIT(24)
|
|
#define UREG_CHICK_MSIX_ENABLE BIT(25)
|
|
#endif /* __iwl_prph_h__ */
|