tegrakernel/kernel/kernel-4.9/drivers/tty/serial/meson_uart.c

714 lines
17 KiB
C

/*
* Based on meson_uart.c, by AMLOGIC, INC.
*
* Copyright (C) 2014 Carlo Caione <carlo@caione.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/clk.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
/* Register offsets */
#define AML_UART_WFIFO 0x00
#define AML_UART_RFIFO 0x04
#define AML_UART_CONTROL 0x08
#define AML_UART_STATUS 0x0c
#define AML_UART_MISC 0x10
#define AML_UART_REG5 0x14
/* AML_UART_CONTROL bits */
#define AML_UART_TX_EN BIT(12)
#define AML_UART_RX_EN BIT(13)
#define AML_UART_TX_RST BIT(22)
#define AML_UART_RX_RST BIT(23)
#define AML_UART_CLR_ERR BIT(24)
#define AML_UART_RX_INT_EN BIT(27)
#define AML_UART_TX_INT_EN BIT(28)
#define AML_UART_DATA_LEN_MASK (0x03 << 20)
#define AML_UART_DATA_LEN_8BIT (0x00 << 20)
#define AML_UART_DATA_LEN_7BIT (0x01 << 20)
#define AML_UART_DATA_LEN_6BIT (0x02 << 20)
#define AML_UART_DATA_LEN_5BIT (0x03 << 20)
/* AML_UART_STATUS bits */
#define AML_UART_PARITY_ERR BIT(16)
#define AML_UART_FRAME_ERR BIT(17)
#define AML_UART_TX_FIFO_WERR BIT(18)
#define AML_UART_RX_EMPTY BIT(20)
#define AML_UART_TX_FULL BIT(21)
#define AML_UART_TX_EMPTY BIT(22)
#define AML_UART_XMIT_BUSY BIT(25)
#define AML_UART_ERR (AML_UART_PARITY_ERR | \
AML_UART_FRAME_ERR | \
AML_UART_TX_FIFO_WERR)
/* AML_UART_CONTROL bits */
#define AML_UART_TWO_WIRE_EN BIT(15)
#define AML_UART_PARITY_TYPE BIT(18)
#define AML_UART_PARITY_EN BIT(19)
#define AML_UART_CLEAR_ERR BIT(24)
#define AML_UART_STOP_BIN_LEN_MASK (0x03 << 16)
#define AML_UART_STOP_BIN_1SB (0x00 << 16)
#define AML_UART_STOP_BIN_2SB (0x01 << 16)
/* AML_UART_MISC bits */
#define AML_UART_XMIT_IRQ(c) (((c) & 0xff) << 8)
#define AML_UART_RECV_IRQ(c) ((c) & 0xff)
/* AML_UART_REG5 bits */
#define AML_UART_BAUD_MASK 0x7fffff
#define AML_UART_BAUD_USE BIT(23)
#define AML_UART_BAUD_XTAL BIT(24)
#define AML_UART_PORT_NUM 6
#define AML_UART_DEV_NAME "ttyAML"
static struct uart_driver meson_uart_driver;
static struct uart_port *meson_ports[AML_UART_PORT_NUM];
static void meson_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
}
static unsigned int meson_uart_get_mctrl(struct uart_port *port)
{
return TIOCM_CTS;
}
static unsigned int meson_uart_tx_empty(struct uart_port *port)
{
u32 val;
val = readl(port->membase + AML_UART_STATUS);
val &= (AML_UART_TX_EMPTY | AML_UART_XMIT_BUSY);
return (val == AML_UART_TX_EMPTY) ? TIOCSER_TEMT : 0;
}
static void meson_uart_stop_tx(struct uart_port *port)
{
u32 val;
val = readl(port->membase + AML_UART_CONTROL);
val &= ~AML_UART_TX_INT_EN;
writel(val, port->membase + AML_UART_CONTROL);
}
static void meson_uart_stop_rx(struct uart_port *port)
{
u32 val;
val = readl(port->membase + AML_UART_CONTROL);
val &= ~AML_UART_RX_EN;
writel(val, port->membase + AML_UART_CONTROL);
}
static void meson_uart_shutdown(struct uart_port *port)
{
unsigned long flags;
u32 val;
free_irq(port->irq, port);
spin_lock_irqsave(&port->lock, flags);
val = readl(port->membase + AML_UART_CONTROL);
val &= ~AML_UART_RX_EN;
val &= ~(AML_UART_RX_INT_EN | AML_UART_TX_INT_EN);
writel(val, port->membase + AML_UART_CONTROL);
spin_unlock_irqrestore(&port->lock, flags);
}
static void meson_uart_start_tx(struct uart_port *port)
{
struct circ_buf *xmit = &port->state->xmit;
unsigned int ch;
u32 val;
if (uart_tx_stopped(port)) {
meson_uart_stop_tx(port);
return;
}
while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) {
if (port->x_char) {
writel(port->x_char, port->membase + AML_UART_WFIFO);
port->icount.tx++;
port->x_char = 0;
continue;
}
if (uart_circ_empty(xmit))
break;
ch = xmit->buf[xmit->tail];
writel(ch, port->membase + AML_UART_WFIFO);
xmit->tail = (xmit->tail+1) & (SERIAL_XMIT_SIZE - 1);
port->icount.tx++;
}
if (!uart_circ_empty(xmit)) {
val = readl(port->membase + AML_UART_CONTROL);
val |= AML_UART_TX_INT_EN;
writel(val, port->membase + AML_UART_CONTROL);
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
static void meson_receive_chars(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
char flag;
u32 status, ch, mode;
do {
flag = TTY_NORMAL;
port->icount.rx++;
status = readl(port->membase + AML_UART_STATUS);
if (status & AML_UART_ERR) {
if (status & AML_UART_TX_FIFO_WERR)
port->icount.overrun++;
else if (status & AML_UART_FRAME_ERR)
port->icount.frame++;
else if (status & AML_UART_PARITY_ERR)
port->icount.frame++;
mode = readl(port->membase + AML_UART_CONTROL);
mode |= AML_UART_CLEAR_ERR;
writel(mode, port->membase + AML_UART_CONTROL);
/* It doesn't clear to 0 automatically */
mode &= ~AML_UART_CLEAR_ERR;
writel(mode, port->membase + AML_UART_CONTROL);
status &= port->read_status_mask;
if (status & AML_UART_FRAME_ERR)
flag = TTY_FRAME;
else if (status & AML_UART_PARITY_ERR)
flag = TTY_PARITY;
}
ch = readl(port->membase + AML_UART_RFIFO);
ch &= 0xff;
if ((status & port->ignore_status_mask) == 0)
tty_insert_flip_char(tport, ch, flag);
if (status & AML_UART_TX_FIFO_WERR)
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
} while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY));
spin_unlock(&port->lock);
tty_flip_buffer_push(tport);
spin_lock(&port->lock);
}
static irqreturn_t meson_uart_interrupt(int irq, void *dev_id)
{
struct uart_port *port = (struct uart_port *)dev_id;
spin_lock(&port->lock);
if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY))
meson_receive_chars(port);
if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) {
if (readl(port->membase + AML_UART_CONTROL) & AML_UART_TX_INT_EN)
meson_uart_start_tx(port);
}
spin_unlock(&port->lock);
return IRQ_HANDLED;
}
static const char *meson_uart_type(struct uart_port *port)
{
return (port->type == PORT_MESON) ? "meson_uart" : NULL;
}
static void meson_uart_reset(struct uart_port *port)
{
u32 val;
val = readl(port->membase + AML_UART_CONTROL);
val |= (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR);
writel(val, port->membase + AML_UART_CONTROL);
val &= ~(AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR);
writel(val, port->membase + AML_UART_CONTROL);
}
static int meson_uart_startup(struct uart_port *port)
{
u32 val;
int ret = 0;
val = readl(port->membase + AML_UART_CONTROL);
val |= AML_UART_CLR_ERR;
writel(val, port->membase + AML_UART_CONTROL);
val &= ~AML_UART_CLR_ERR;
writel(val, port->membase + AML_UART_CONTROL);
val |= (AML_UART_RX_EN | AML_UART_TX_EN);
writel(val, port->membase + AML_UART_CONTROL);
val |= (AML_UART_RX_INT_EN | AML_UART_TX_INT_EN);
writel(val, port->membase + AML_UART_CONTROL);
val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2));
writel(val, port->membase + AML_UART_MISC);
ret = request_irq(port->irq, meson_uart_interrupt, 0,
meson_uart_type(port), port);
return ret;
}
static void meson_uart_change_speed(struct uart_port *port, unsigned long baud)
{
u32 val;
while (!meson_uart_tx_empty(port))
cpu_relax();
val = readl(port->membase + AML_UART_REG5);
val &= ~AML_UART_BAUD_MASK;
if (port->uartclk == 24000000) {
val = ((port->uartclk / 3) / baud) - 1;
val |= AML_UART_BAUD_XTAL;
} else {
val = ((port->uartclk * 10 / (baud * 4) + 5) / 10) - 1;
}
val |= AML_UART_BAUD_USE;
writel(val, port->membase + AML_UART_REG5);
}
static void meson_uart_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
{
unsigned int cflags, iflags, baud;
unsigned long flags;
u32 val;
spin_lock_irqsave(&port->lock, flags);
cflags = termios->c_cflag;
iflags = termios->c_iflag;
val = readl(port->membase + AML_UART_CONTROL);
val &= ~AML_UART_DATA_LEN_MASK;
switch (cflags & CSIZE) {
case CS8:
val |= AML_UART_DATA_LEN_8BIT;
break;
case CS7:
val |= AML_UART_DATA_LEN_7BIT;
break;
case CS6:
val |= AML_UART_DATA_LEN_6BIT;
break;
case CS5:
val |= AML_UART_DATA_LEN_5BIT;
break;
}
if (cflags & PARENB)
val |= AML_UART_PARITY_EN;
else
val &= ~AML_UART_PARITY_EN;
if (cflags & PARODD)
val |= AML_UART_PARITY_TYPE;
else
val &= ~AML_UART_PARITY_TYPE;
val &= ~AML_UART_STOP_BIN_LEN_MASK;
if (cflags & CSTOPB)
val |= AML_UART_STOP_BIN_2SB;
else
val &= ~AML_UART_STOP_BIN_1SB;
if (cflags & CRTSCTS)
val &= ~AML_UART_TWO_WIRE_EN;
else
val |= AML_UART_TWO_WIRE_EN;
writel(val, port->membase + AML_UART_CONTROL);
baud = uart_get_baud_rate(port, termios, old, 9600, 115200);
meson_uart_change_speed(port, baud);
port->read_status_mask = AML_UART_TX_FIFO_WERR;
if (iflags & INPCK)
port->read_status_mask |= AML_UART_PARITY_ERR |
AML_UART_FRAME_ERR;
port->ignore_status_mask = 0;
if (iflags & IGNPAR)
port->ignore_status_mask |= AML_UART_PARITY_ERR |
AML_UART_FRAME_ERR;
uart_update_timeout(port, termios->c_cflag, baud);
spin_unlock_irqrestore(&port->lock, flags);
}
static int meson_uart_verify_port(struct uart_port *port,
struct serial_struct *ser)
{
int ret = 0;
if (port->type != PORT_MESON)
ret = -EINVAL;
if (port->irq != ser->irq)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
return ret;
}
static int meson_uart_res_size(struct uart_port *port)
{
struct platform_device *pdev = to_platform_device(port->dev);
struct resource *res;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(port->dev, "cannot obtain I/O memory region");
return -ENODEV;
}
return resource_size(res);
}
static void meson_uart_release_port(struct uart_port *port)
{
int size = meson_uart_res_size(port);
if (port->flags & UPF_IOREMAP) {
devm_release_mem_region(port->dev, port->mapbase, size);
devm_iounmap(port->dev, port->membase);
port->membase = NULL;
}
}
static int meson_uart_request_port(struct uart_port *port)
{
int size = meson_uart_res_size(port);
if (size < 0)
return size;
if (!devm_request_mem_region(port->dev, port->mapbase, size,
dev_name(port->dev))) {
dev_err(port->dev, "Memory region busy\n");
return -EBUSY;
}
if (port->flags & UPF_IOREMAP) {
port->membase = devm_ioremap_nocache(port->dev,
port->mapbase,
size);
if (port->membase == NULL)
return -ENOMEM;
}
return 0;
}
static void meson_uart_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE) {
port->type = PORT_MESON;
meson_uart_request_port(port);
}
}
static struct uart_ops meson_uart_ops = {
.set_mctrl = meson_uart_set_mctrl,
.get_mctrl = meson_uart_get_mctrl,
.tx_empty = meson_uart_tx_empty,
.start_tx = meson_uart_start_tx,
.stop_tx = meson_uart_stop_tx,
.stop_rx = meson_uart_stop_rx,
.startup = meson_uart_startup,
.shutdown = meson_uart_shutdown,
.set_termios = meson_uart_set_termios,
.type = meson_uart_type,
.config_port = meson_uart_config_port,
.request_port = meson_uart_request_port,
.release_port = meson_uart_release_port,
.verify_port = meson_uart_verify_port,
};
#ifdef CONFIG_SERIAL_MESON_CONSOLE
static void meson_console_putchar(struct uart_port *port, int ch)
{
if (!port->membase)
return;
while (readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)
cpu_relax();
writel(ch, port->membase + AML_UART_WFIFO);
}
static void meson_serial_port_write(struct uart_port *port, const char *s,
u_int count)
{
unsigned long flags;
int locked;
u32 val, tmp;
local_irq_save(flags);
if (port->sysrq) {
locked = 0;
} else if (oops_in_progress) {
locked = spin_trylock(&port->lock);
} else {
spin_lock(&port->lock);
locked = 1;
}
val = readl(port->membase + AML_UART_CONTROL);
val |= AML_UART_TX_EN;
tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN);
writel(tmp, port->membase + AML_UART_CONTROL);
uart_console_write(port, s, count, meson_console_putchar);
writel(val, port->membase + AML_UART_CONTROL);
if (locked)
spin_unlock(&port->lock);
local_irq_restore(flags);
}
static void meson_serial_console_write(struct console *co, const char *s,
u_int count)
{
struct uart_port *port;
port = meson_ports[co->index];
if (!port)
return;
meson_serial_port_write(port, s, count);
}
static int meson_serial_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
if (co->index < 0 || co->index >= AML_UART_PORT_NUM)
return -EINVAL;
port = meson_ports[co->index];
if (!port || !port->membase)
return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(port, co, baud, parity, bits, flow);
}
static struct console meson_serial_console = {
.name = AML_UART_DEV_NAME,
.write = meson_serial_console_write,
.device = uart_console_device,
.setup = meson_serial_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &meson_uart_driver,
};
static int __init meson_serial_console_init(void)
{
register_console(&meson_serial_console);
return 0;
}
console_initcall(meson_serial_console_init);
static void meson_serial_early_console_write(struct console *co,
const char *s,
u_int count)
{
struct earlycon_device *dev = co->data;
meson_serial_port_write(&dev->port, s, count);
}
static int __init
meson_serial_early_console_setup(struct earlycon_device *device, const char *opt)
{
if (!device->port.membase)
return -ENODEV;
device->con->write = meson_serial_early_console_write;
return 0;
}
OF_EARLYCON_DECLARE(meson, "amlogic,meson-uart",
meson_serial_early_console_setup);
#define MESON_SERIAL_CONSOLE (&meson_serial_console)
#else
#define MESON_SERIAL_CONSOLE NULL
#endif
static struct uart_driver meson_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "meson_uart",
.dev_name = AML_UART_DEV_NAME,
.nr = AML_UART_PORT_NUM,
.cons = MESON_SERIAL_CONSOLE,
};
static int meson_uart_probe(struct platform_device *pdev)
{
struct resource *res_mem, *res_irq;
struct uart_port *port;
struct clk *clk;
int ret = 0;
if (pdev->dev.of_node)
pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
if (pdev->id < 0 || pdev->id >= AML_UART_PORT_NUM)
return -EINVAL;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res_mem)
return -ENODEV;
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res_irq)
return -ENODEV;
if (meson_ports[pdev->id]) {
dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
return -EBUSY;
}
port = devm_kzalloc(&pdev->dev, sizeof(struct uart_port), GFP_KERNEL);
if (!port)
return -ENOMEM;
clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(clk))
return PTR_ERR(clk);
port->uartclk = clk_get_rate(clk);
port->iotype = UPIO_MEM;
port->mapbase = res_mem->start;
port->irq = res_irq->start;
port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY;
port->dev = &pdev->dev;
port->line = pdev->id;
port->type = PORT_MESON;
port->x_char = 0;
port->ops = &meson_uart_ops;
port->fifosize = 64;
meson_ports[pdev->id] = port;
platform_set_drvdata(pdev, port);
/* reset port before registering (and possibly registering console) */
if (meson_uart_request_port(port) >= 0) {
meson_uart_reset(port);
meson_uart_release_port(port);
}
ret = uart_add_one_port(&meson_uart_driver, port);
if (ret)
meson_ports[pdev->id] = NULL;
return ret;
}
static int meson_uart_remove(struct platform_device *pdev)
{
struct uart_port *port;
port = platform_get_drvdata(pdev);
uart_remove_one_port(&meson_uart_driver, port);
meson_ports[pdev->id] = NULL;
return 0;
}
static const struct of_device_id meson_uart_dt_match[] = {
{ .compatible = "amlogic,meson-uart" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, meson_uart_dt_match);
static struct platform_driver meson_uart_platform_driver = {
.probe = meson_uart_probe,
.remove = meson_uart_remove,
.driver = {
.name = "meson_uart",
.of_match_table = meson_uart_dt_match,
},
};
static int __init meson_uart_init(void)
{
int ret;
ret = uart_register_driver(&meson_uart_driver);
if (ret)
return ret;
ret = platform_driver_register(&meson_uart_platform_driver);
if (ret)
uart_unregister_driver(&meson_uart_driver);
return ret;
}
static void __exit meson_uart_exit(void)
{
platform_driver_unregister(&meson_uart_platform_driver);
uart_unregister_driver(&meson_uart_driver);
}
module_init(meson_uart_init);
module_exit(meson_uart_exit);
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
MODULE_DESCRIPTION("Amlogic Meson serial port driver");
MODULE_LICENSE("GPL v2");