tegrakernel/kernel/kernel-4.9/include/linux/mailbox_controller.h

142 lines
5.7 KiB
C

/*
* Copyright (c) 2017, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __MAILBOX_CONTROLLER_H
#define __MAILBOX_CONTROLLER_H
#include <linux/of.h>
#include <linux/types.h>
#include <linux/hrtimer.h>
#include <linux/device.h>
#include <linux/completion.h>
struct mbox_chan;
/**
* struct mbox_chan_ops - methods to control mailbox channels
* @send_data: The API asks the MBOX controller driver, in atomic
* context try to transmit a message on the bus. Returns 0 if
* data is accepted for transmission, -EBUSY while rejecting
* if the remote hasn't yet read the last data sent. Actual
* transmission of data is reported by the controller via
* mbox_chan_txdone (if it has some TX ACK irq). It must not
* sleep.
* @startup: Called when a client requests the chan. The controller
* could ask clients for additional parameters of communication
* to be provided via client's chan_data. This call may
* block. After this call the Controller must forward any
* data received on the chan by calling mbox_chan_received_data.
* The controller may do stuff that need to sleep.
* @shutdown: Called when a client relinquishes control of a chan.
* This call may block too. The controller must not forward
* any received data anymore.
* The controller may do stuff that need to sleep.
* @last_tx_done: If the controller sets 'txdone_poll', the API calls
* this to poll status of last TX. The controller must
* give priority to IRQ method over polling and never
* set both txdone_poll and txdone_irq. Only in polling
* mode 'send_data' is expected to return -EBUSY.
* The controller may do stuff that need to sleep/block.
* Used only if txdone_poll:=true && txdone_irq:=false
* @peek_data: Atomic check for any received data. Return true if controller
* has some data to push to the client. False otherwise.
* @get_max_txsize: The API aks the queries the MBOX controller driver for
* max tx message len and returns it to the client. Returns
* negative on failure, max_txlen on success. If the controller
* driver does not impose a limit, returns INT_MAX.
*/
struct mbox_chan_ops {
int (*send_data)(struct mbox_chan *chan, void *data);
int (*startup)(struct mbox_chan *chan);
void (*shutdown)(struct mbox_chan *chan);
bool (*last_tx_done)(struct mbox_chan *chan);
bool (*peek_data)(struct mbox_chan *chan);
int (*get_max_txsize)(struct mbox_chan *chan);
};
/**
* struct mbox_controller - Controller of a class of communication channels
* @dev: Device backing this controller
* @ops: Operators that work on each communication chan
* @chans: Array of channels
* @num_chans: Number of channels in the 'chans' array.
* @txdone_irq: Indicates if the controller can report to API when
* the last transmitted data was read by the remote.
* Eg, if it has some TX ACK irq.
* @txdone_poll: If the controller can read but not report the TX
* done. Ex, some register shows the TX status but
* no interrupt rises. Ignored if 'txdone_irq' is set.
* @txpoll_period: If 'txdone_poll' is in effect, the API polls for
* last TX's status after these many millisecs
* @of_xlate: Controller driver specific mapping of channel via DT
* @poll_hrt: API private. hrtimer used to poll for TXDONE on all
* channels.
* @node: API private. To hook into list of controllers.
*/
struct mbox_controller {
struct device *dev;
const struct mbox_chan_ops *ops;
struct mbox_chan *chans;
int num_chans;
bool txdone_irq;
bool txdone_poll;
unsigned txpoll_period;
struct mbox_chan *(*of_xlate)(struct mbox_controller *mbox,
const struct of_phandle_args *sp);
/* Internal to API */
struct hrtimer poll_hrt;
struct list_head node;
};
/*
* The length of circular buffer for queuing messages from a client.
* 'msg_count' tracks the number of buffered messages while 'msg_free'
* is the index where the next message would be buffered.
* We shouldn't need it too big because every transfer is interrupt
* triggered and if we have lots of data to transfer, the interrupt
* latencies are going to be the bottleneck, not the buffer length.
* Besides, mbox_send_message could be called from atomic context and
* the client could also queue another message from the notifier 'tx_done'
* of the last transfer done.
* REVISIT: If too many platforms see the "Try increasing MBOX_TX_QUEUE_LEN"
* print, it needs to be taken from config option or somesuch.
*/
#define MBOX_TX_QUEUE_LEN 20
/**
* struct mbox_chan - s/w representation of a communication chan
* @mbox: Pointer to the parent/provider of this channel
* @txdone_method: Way to detect TXDone chosen by the API
* @cl: Pointer to the current owner of this channel
* @tx_complete: Transmission completion
* @active_req: Currently active request hook
* @msg_count: No. of mssg currently queued
* @msg_free: Index of next available mssg slot
* @msg_data: Hook for data packet
* @lock: Serialise access to the channel
* @con_priv: Hook for controller driver to attach private data
*/
struct mbox_chan {
struct mbox_controller *mbox;
unsigned txdone_method;
struct mbox_client *cl;
struct completion tx_complete;
void *active_req;
unsigned msg_count, msg_free;
void *msg_data[MBOX_TX_QUEUE_LEN];
spinlock_t lock; /* Serialise access to the channel */
void *con_priv;
};
int mbox_controller_register(struct mbox_controller *mbox); /* can sleep */
void mbox_controller_unregister(struct mbox_controller *mbox); /* can sleep */
void mbox_chan_received_data(struct mbox_chan *chan, void *data); /* atomic */
void mbox_chan_txdone(struct mbox_chan *chan, int r); /* atomic */
#endif /* __MAILBOX_CONTROLLER_H */