From 20c0e89d815ddd3ed84580b499d720d2d88a6ae9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Oliver=20K=C3=B6ster?=
<36196269+knutwurst@users.noreply.github.com>
Date: Fri, 15 Jan 2021 22:07:33 +0100
Subject: [PATCH] Update README.md
---
README.md | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/README.md b/README.md
index aaa12f3d..355d8a4a 100755
--- a/README.md
+++ b/README.md
@@ -43,7 +43,6 @@ Wenn Du Fragen hast, schaue gern in der offiziellen [Facebook-Gruppe](https://ww
* Pause & Filamentwechselfunktion
* Automatische EEPROM Initialisierung
* Filament Runout Sensor kann im Menü temporär deaktiviert werden
- * Wiederaufnahme des Drucks nach Stromausfall (WiP)
* [Druckbettgröße erweitert auf 225 x 220 x 210 mm](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Set-new-print-bed-size)
* Automatischer 'Slowdown', falls Daten nicht schnell genug fließen
* Vollautomatisches Hotend und Ultrabase PID Tuning
@@ -58,7 +57,7 @@ Du kannst die fertigen Binärdateien hier herunterladen: https://github.com/knut
Um es übersichtlich zu gestalten, beinhalten die Dateinamen die einzelnen Features.
-Das Fehlen von Zusätzen (z.B. MEGA_1.0.0.hex) bedeutet, dass die Firmware für den "normalen" i3 Mega gedacht ist, an dem keine Veränderungen vorgenommen wurden.
+Das Fehlen von Zusätzen (z.B. MEGA_1.0.0.hex) bedeutet, dass die Firmware für den "normalen" i3 Mega gedacht ist, an dem keine Veränderungen vorgenommen wurden.
`_1G` steht für die erste Generation des i3 Mega mit nur einem Z Endstop. Diese Firmware ist nicht für den normalen i3 Mega geeignet!
@@ -78,7 +77,7 @@ Das Fehlen von Zusätzen (z.B. MEGA_1.0.0.hex) bedeutet, dass die Firmware für
`_11` steht für das Trigorilla_14 v1.1 Mainboard, bei welchem sich die Pinbelegung für den Server-Port geändert hat.
-Anmerkung: Die Mainboard-Version 1.0 oder 1.1 ist nur für den Einbau des BLTouch Sensors relevant und kann normalerweise ignoriert werden.
+Anmerkung: Die Mainboard-Version 1.0 oder 1.1 ist nur für den Einbau des BLTouch Sensors relevant und kann normalerweise ignoriert werden.
Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich. ;)
@@ -104,7 +103,6 @@ Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich.
* Pause & filament change function
* Automatic EEPROM initialization
* Filament runout sensor can be temporarily deactivated in the menu
- * Resumption of printing after a power failure (WiP)
* [Print bed size enlarged to 225 x 220 x 210 mm](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Set-new-print-bed-size)
* Automatic 'slowdown' if data does not flow fast enough
* Fully automatic hotend and ultrabase PID tuning
@@ -118,7 +116,7 @@ You can download the precompiled binary files from here: https://github.com/knut
In order to make it clear, the file names contain the individual features.
-The lack of additions (e.g. MEGA_1.0.0.hex) means that the firmware is intended for the "normal" i3 Mega on which no changes have been made.
+The lack of additions (e.g. MEGA_1.0.0.hex) means that the firmware is intended for the "normal" i3 Mega on which no changes have been made.
`_1G` stands for the firt generation i3 Mega with only one Z endstop. Do NOT use this Firmware on the regular i3 Mega!
@@ -138,7 +136,7 @@ The lack of additions (e.g. MEGA_1.0.0.hex) means that the firmware is intended
`_11` stands for the Trigorilla_14 v1.1 mainboard, on which the pin assignment for the server port has changed.
-Note: The mainboard version 1.0 or 1.1 is only relevant for the installation of the BLTouch sensor and can normally be ignored.
+Note: The mainboard version 1.0 or 1.1 is only relevant for the installation of the BLTouch sensor and can normally be ignored.
For (almost) every combination there is a suitable firmware in the download area. ;)