diff --git a/Marlin/src/lcd/anycubic_touchscreen.h b/Marlin/src/lcd/anycubic_touchscreen.h
index 483958f8..c0b67144 100755
--- a/Marlin/src/lcd/anycubic_touchscreen.h
+++ b/Marlin/src/lcd/anycubic_touchscreen.h
@@ -92,49 +92,49 @@ char *ftostr32(const float &);
 #endif
 
 #if ENABLED(KNUTWURST_DGUS2_TFT)
-#define SM_DIR_UP_L           "<<< BACK <<<.gcode"
+#define SM_DIR_UP_L           "<<< BACK <<<        .gcode"
 #define SM_DIR_UP_S           "DIR_UP~1.GCO"
-#define SM_SPECIAL_MENU_L     "<Special Menu>.gcode"
+#define SM_SPECIAL_MENU_L     "<Special Menu>      .gcode"
 #define SM_SPECIAL_MENU_S     "<SPECI~1.GCO"
-#define SM_PID_HOTEND_L       "<PID Tune Hotend>.gcode"
+#define SM_PID_HOTEND_L       "<PID Tune Hotend>   .gcode"
 #define SM_PID_HOTEND_S       "<PIDTU~1.GCO"
 #define SM_PID_BED_L          "<PID Tune Ultrabase>.gcode"
 #define SM_PID_BED_S          "<PIDTU~2.GCO"
-#define SM_SAVE_EEPROM_L      "<Save EEPROM>.gcode"
+#define SM_SAVE_EEPROM_L      "<Save EEPROM>       .gcode"
 #define SM_SAVE_EEPROM_S      "<SAVEE~1.GCO"
-#define SM_LOAD_DEFAULTS_L    "<Load FW Defaults>.gcode"
+#define SM_LOAD_DEFAULTS_L    "<Load FW Defaults>  .gcode"
 #define SM_LOAD_DEFAULTS_S    "<LOADF~1.GCO"
-#define SM_PREHEAT_BED_L      "<Preheat Ultrabase>.gcode"
+#define SM_PREHEAT_BED_L      "<Preheat Ultrabase> .gcode"
 #define SM_PREHEAT_BED_S      "<PREHE~1.GCO"
-#define SM_MESH_START_L       "<Start Mesh Leveling>.gcode"
+#define SM_MESH_START_L       "<Mesh Leveling>     .gcode"
 #define SM_MESH_START_S       "<START~1.GCO"
-#define SM_MESH_NEXT_L        "<Next Mesh Point>.gcode"
+#define SM_MESH_NEXT_L        "<Next Mesh Point>   .gcode"
 #define SM_MESH_NEXT_S        "<NEXTM~1.GCO"
-#define SM_Z_UP_01_L          "<Z Up 0.1>.gcode"
+#define SM_Z_UP_01_L          "<Z Up 0.1>          .gcode"
 #define SM_Z_UP_01_S          "<ZUP01~1.GCO"
-#define SM_Z_DN_01_L          "<Z Down 0.1>.gcode"
+#define SM_Z_DN_01_L          "<Z Down 0.1>        .gcode"
 #define SM_Z_DN_01_S          "<ZDOWN~1.GCO"
-#define SM_Z_UP_002_L         "<Z Up 0.02>.gcode"
+#define SM_Z_UP_002_L         "<Z Up 0.02>         .gcode"
 #define SM_Z_UP_002_S         "<ZUP00~1.GCO"
-#define SM_Z_DN_002_L         "<Z Down 0.02>.gcode"
+#define SM_Z_DN_002_L         "<Z Down 0.02>       .gcode"
 #define SM_Z_DN_002_S         "<ZDOWN~2.GCO"
-#define SM_Z_UP_001_L         "<Z Up 0.01>.gcode"
+#define SM_Z_UP_001_L         "<Z Up 0.01>         .gcode"
 #define SM_Z_UP_001_S         "<ZUP00~2.GCO"
-#define SM_Z_DN_001_L         "<Z Down 0.01>.gcode"
+#define SM_Z_DN_001_L         "<Z Down 0.01>       .gcode"
 #define SM_Z_DN_001_S         "<ZDOWN~3.GCO"
-#define SM_BLTOUCH_L          "<BLTouch Leveling>.gcode"
+#define SM_BLTOUCH_L          "<BLTouch Leveling>  .gcode"
 #define SM_BLTOUCH_S          "<BLTOU~1.GCO"
-#define SM_PAUSE_L            "<Fil. Change Pause>.gcode"
+#define SM_PAUSE_L            "<Fil. Change Pause> .gcode"
 #define SM_PAUSE_S            "<FILCH~2.GCO"
 #define SM_RESUME_L           "<Fil. Change Resume>.gcode"
 #define SM_RESUME_S           "<FILCH~1.GCO"
-#define SM_DIS_FILSENS_L      "<Disable Fil. Sensor>.gcode"
+#define SM_DIS_FILSENS_L      "<Disable Fil.Sensor>.gcode"
 #define SM_DIS_FILSENS_S      "<DISAB~1.GCO"
 #define SM_EN_FILSENS_L       "<Enable Fil. Sensor>.gcode"
 #define SM_EN_FILSENS_S       "<ENABL~1.GCO"
-#define SM_EXIT_L             "<Exit>.gcode"
+#define SM_EXIT_L             "<Exit>              .gcode"
 #define SM_EXIT_S             "<EXIT_~1.GCO"
-#define SM_BACK_L             "<End Mesh Leveling>.gcode"
+#define SM_BACK_L             "<End Mesh Leveling> .gcode"
 #define SM_BACK_S             "<BACK_~1.GCO"
 #endif