From c9c1dffaff5a9e91593b7284fac26575542f78cc Mon Sep 17 00:00:00 2001
From: Knutwurst <36196269+knutwurst@users.noreply.github.com>
Date: Thu, 6 Aug 2020 14:46:50 +0200
Subject: [PATCH] Better short filenames for special menu on old TFT to ensuree
 the firmware is not used on DGUS2 accedentally.

---
 Marlin/src/lcd/anycubic_touchscreen.h | 40 +++++++++++++--------------
 1 file changed, 20 insertions(+), 20 deletions(-)

diff --git a/Marlin/src/lcd/anycubic_touchscreen.h b/Marlin/src/lcd/anycubic_touchscreen.h
index adc7493a..1396abaa 100755
--- a/Marlin/src/lcd/anycubic_touchscreen.h
+++ b/Marlin/src/lcd/anycubic_touchscreen.h
@@ -48,45 +48,45 @@ char *ftostr32(const float &);
 #define SM_DIR_UP_L           "/.."
 #define SM_DIR_UP_S           ".."
 #define SM_SPECIAL_MENU_L     "<Special Menu>"
-#define SM_SPECIAL_MENU_S     "<SPECI~1.GCO"
+#define SM_SPECIAL_MENU_S     "<SPECM>"
 #define SM_PID_HOTEND_L       "<PID Tune Hotend>"
-#define SM_PID_HOTEND_S       "<PIDTU~1.GCO"
+#define SM_PID_HOTEND_S       "<PIDHE>"
 #define SM_PID_BED_L          "<PID Tune Ultrabase>"
-#define SM_PID_BED_S          "<PIDTU~2.GCO"
+#define SM_PID_BED_S          "<PIDUB>"
 #define SM_SAVE_EEPROM_L      "<Save EEPROM>"
-#define SM_SAVE_EEPROM_S      "<SAVEE~1.GCO"
+#define SM_SAVE_EEPROM_S      "<SAVEE>"
 #define SM_LOAD_DEFAULTS_L    "<Load FW Defaults>"
-#define SM_LOAD_DEFAULTS_S    "<LOADF~1.GCO"
+#define SM_LOAD_DEFAULTS_S    "<LDDEF>"
 #define SM_PREHEAT_BED_L      "<Preheat Ultrabase>"
-#define SM_PREHEAT_BED_S      "<PREHE~1.GCO"
+#define SM_PREHEAT_BED_S      "<PREHE>"
 #define SM_MESH_START_L       "<Start Mesh Leveling>"
-#define SM_MESH_START_S       "<START~1.GCO"
+#define SM_MESH_START_S       "<SMESH>"
 #define SM_MESH_NEXT_L        "<Next Mesh Point>"
-#define SM_MESH_NEXT_S        "<NEXTM~1.GCO"
+#define SM_MESH_NEXT_S        "<NEXTM>"
 #define SM_Z_UP_01_L          "<Z Up 0.1>"
-#define SM_Z_UP_01_S          "<ZUP01~1.GCO"
+#define SM_Z_UP_01_S          "<ZUP01>"
 #define SM_Z_DN_01_L          "<Z Down 0.1>"
-#define SM_Z_DN_01_S          "<ZDOWN~1.GCO"
+#define SM_Z_DN_01_S          "<ZDN01>"
 #define SM_Z_UP_002_L         "<Z Up 0.02>"
-#define SM_Z_UP_002_S         "<ZUP00~1.GCO"
+#define SM_Z_UP_002_S         "<ZUP002>"
 #define SM_Z_DN_002_L         "<Z Down 0.02>"
-#define SM_Z_DN_002_S         "<ZDOWN~2.GCO"
+#define SM_Z_DN_002_S         "<ZDN002>"
 #define SM_Z_UP_001_L         "<Z Up 0.01>"
-#define SM_Z_UP_001_S         "<ZUP00~2.GCO"
+#define SM_Z_UP_001_S         "<ZUP001>"
 #define SM_Z_DN_001_L         "<Z Down 0.01>"
-#define SM_Z_DN_001_S         "<ZDOWN~3.GCO"
+#define SM_Z_DN_001_S         "<ZDN001>"
 #define SM_BLTOUCH_L          "<BLTouch Leveling>"
-#define SM_BLTOUCH_S          "<BLTOU~1.GCO"
+#define SM_BLTOUCH_S          "<BLTCH>"
 #define SM_PAUSE_L            "<Fil. Change Pause>"
-#define SM_PAUSE_S            "<FILCH~2.GCO"
+#define SM_PAUSE_S            "<PAUSE>"
 #define SM_RESUME_L           "<Fil. Change Resume>"
-#define SM_RESUME_S           "<FILCH~1.GCO"
+#define SM_RESUME_S           "<RESUM>"
 #define SM_DIS_FILSENS_L      "<Disable Fil. Sensor>"
-#define SM_DIS_FILSENS_S      "<DISAB~1.GCO"
+#define SM_DIS_FILSENS_S      "<DISSEN>"
 #define SM_EN_FILSENS_L       "<Enable Fil. Sensor>"
-#define SM_EN_FILSENS_S       "<ENABL~1.GCO"
+#define SM_EN_FILSENS_S       "<ENSEN>"
 #define SM_EXIT_L             "<Exit>"
-#define SM_EXIT_S             "<EXIT_~1.GCO"
+#define SM_EXIT_S             "<EXIT>"
 #endif
 
 #if ENABLED(KNUTWURST_DGUS2_TFT)