diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 5152e85d..268cdb6b 100755
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1131,38 +1131,38 @@
  */
 #if ENABLED(KNUTWURST_MEGA)
   #if ENABLED(KNUTWURST_BMG)
-    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 30 }
+    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 40 }
   #else
     #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 80 }
   #endif
 #endif
 
 #if ENABLED(KNUTWURST_MEGA_S)
-  #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 30 } // same feedrate for BMG
+  #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 40 } // same feedrate for BMG
 #endif
 
 #if ENABLED(KNUTWURST_MEGA_X)
   #if ENABLED(KNUTWURST_BMG)
-    #define DEFAULT_MAX_FEEDRATE            { 120, 120, 12, 30 } // correct for BMG?
+    #define DEFAULT_MAX_FEEDRATE            { 120, 120, 12, 40 } // correct for BMG?
   #else
-    #define DEFAULT_MAX_FEEDRATE            { 120, 120, 12, 80 } // thanks to Simon Geis
+    #define DEFAULT_MAX_FEEDRATE            { 120, 120, 12, 60 } // thanks to Simon Geis
   #endif
 #endif
 
 #if ENABLED(KNUTWURST_MEGA_P)
-  #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 30 }
+  #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 40 }
 #endif
 
 #if ENABLED(KNUTWURST_CHIRON)
   #if ENABLED(KNUTWURST_BMG)
-    #define DEFAULT_MAX_FEEDRATE          { 100, 100, 20, 30 }
+    #define DEFAULT_MAX_FEEDRATE          { 100, 100, 20, 40 }
   #else
-    #define DEFAULT_MAX_FEEDRATE          { 100, 100, 20, 80 }
+    #define DEFAULT_MAX_FEEDRATE          { 100, 100, 20, 60 }
   #endif
 #endif
 
 #if ENABLED(KNUTWURST_4MAXP2)
-  #define DEFAULT_MAX_FEEDRATE          { 150, 150, 18, 30 }
+  #define DEFAULT_MAX_FEEDRATE          { 150, 150, 18, 80 }
 #endif
 
 
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 2587d232..d5224ebb 100755
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -2472,7 +2472,7 @@
                                                   //   Filament can be extruded repeatedly from the Filament Change menu
                                                   //   until extrusion is consistent, and to purge old filament.
   //#define ADVANCED_PAUSE_RESUME_PRIME        0  // (mm) Extra distance to prime nozzle after returning from park.
-  //#define ADVANCED_PAUSE_FANS_PAUSE             // Turn off print-cooling fans while the machine is paused.
+  #define ADVANCED_PAUSE_FANS_PAUSE             // Turn off print-cooling fans while the machine is paused.
 
                                                   // Filament Unload does a Retract, Delay, and Purge first:
   #define FILAMENT_UNLOAD_PURGE_RETRACT       13  // (mm) Unload initial retract length.