diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index d4ef2c9a..5860146e 100755 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -70,6 +70,7 @@ * MEGA is the normal i3 Version without spool holder and the cassic extruder * MEGA_S is the S version with Titan clone extruder * MEGA_X is the big version with 310x310mm Bed + * MEGA_P is the "Pro" Version with BMG Extruder, 2 TMC Steppers and Laser * * PLEASE READ THE WARNING ABOVE! * @@ -77,6 +78,7 @@ //#define KNUTWURST_MEGA //#define KNUTWURST_MEGA_S //#define KNUTWURST_MEGA_X +//#define KNUTWURST_MEGA_P /* * If you have defined the MEGA_X or if @@ -778,6 +780,17 @@ //#define ENDSTOPPULLDOWN_ZMIN_PROBE #endif +#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). + #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + #define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. + //#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#endif + #if ENABLED(KNUTWURST_MEGA_X) // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. @@ -789,16 +802,6 @@ //#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #endif -#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S) - // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). - #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. - #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. - #define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. - #define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. - #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. - #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. - //#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#endif /** * Stepper Drivers @@ -817,41 +820,41 @@ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ #if ENABLED(KNUTWURST_TMC) -#define X_DRIVER_TYPE TMC2208_STANDALONE -#define Y_DRIVER_TYPE TMC2208_STANDALONE -#define Z_DRIVER_TYPE TMC2208_STANDALONE -//#define X2_DRIVER_TYPE TMC2208_STANDALONE -//#define Y2_DRIVER_TYPE TMC2208_STANDALONE -//#define Z2_DRIVER_TYPE TMC2208_STANDALONE -//#define Z3_DRIVER_TYPE TMC2208_STANDALONE -//#define Z4_DRIVER_TYPE TMC2208_STANDALONE -#define E0_DRIVER_TYPE TMC2208_STANDALONE -#define E1_DRIVER_TYPE TMC2208_STANDALONE -//#define E2_DRIVER_TYPE TMC2208_STANDALONE -//#define E3_DRIVER_TYPE TMC2208_STANDALONE -//#define E4_DRIVER_TYPE TMC2208_STANDALONE -//#define E5_DRIVER_TYPE TMC2208_STANDALONE -//#define E6_DRIVER_TYPE TMC2208_STANDALONE -//#define E7_DRIVER_TYPE TMC2208_STANDALONE + #define X_DRIVER_TYPE TMC2208_STANDALONE + #define Y_DRIVER_TYPE TMC2208_STANDALONE + #define Z_DRIVER_TYPE TMC2208_STANDALONE + //#define X2_DRIVER_TYPE TMC2208_STANDALONE + //#define Y2_DRIVER_TYPE TMC2208_STANDALONE + //#define Z2_DRIVER_TYPE TMC2208_STANDALONE + //#define Z3_DRIVER_TYPE TMC2208_STANDALONE + //#define Z4_DRIVER_TYPE TMC2208_STANDALONE + #define E0_DRIVER_TYPE TMC2208_STANDALONE + #define E1_DRIVER_TYPE TMC2208_STANDALONE + //#define E2_DRIVER_TYPE TMC2208_STANDALONE + //#define E3_DRIVER_TYPE TMC2208_STANDALONE + //#define E4_DRIVER_TYPE TMC2208_STANDALONE + //#define E5_DRIVER_TYPE TMC2208_STANDALONE + //#define E6_DRIVER_TYPE TMC2208_STANDALONE + //#define E7_DRIVER_TYPE TMC2208_STANDALONE #endif #if DISABLED(KNUTWURST_TMC) -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 -//#define E6_DRIVER_TYPE A4988 -//#define E7_DRIVER_TYPE A4988 + #define X_DRIVER_TYPE A4988 + #define Y_DRIVER_TYPE A4988 + #define Z_DRIVER_TYPE A4988 + //#define X2_DRIVER_TYPE A4988 + //#define Y2_DRIVER_TYPE A4988 + //#define Z2_DRIVER_TYPE A4988 + //#define Z3_DRIVER_TYPE A4988 + //#define Z4_DRIVER_TYPE A4988 + #define E0_DRIVER_TYPE A4988 + #define E1_DRIVER_TYPE A4988 + //#define E2_DRIVER_TYPE A4988 + //#define E3_DRIVER_TYPE A4988 + //#define E4_DRIVER_TYPE A4988 + //#define E5_DRIVER_TYPE A4988 + //#define E6_DRIVER_TYPE A4988 + //#define E7_DRIVER_TYPE A4988 #endif // Enable this feature if all enabled endstop pins are interrupt-capable. @@ -909,6 +912,11 @@ #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 400 } #endif +#if ENABLED(KNUTWURST_MEGA_P) + #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } +#endif + + /** * Default Max Feed Rate (mm/s) * Override with M203 @@ -926,6 +934,9 @@ #define DEFAULT_MAX_FEEDRATE { 120, 120, 18, 80 } // thanks to Simon Geis #endif +#if ENABLED(KNUTWURST_MEGA_P) + #define DEFAULT_MAX_FEEDRATE { 500, 500, 8, 30 } +#endif //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 @@ -939,7 +950,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S) +#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #define DEFAULT_MAX_ACCELERATION { 3000, 2000, 60, 10000 } #endif @@ -982,6 +993,12 @@ #define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves #endif +#if ENABLED(KNUTWURST_MEGA_P) + #define DEFAULT_ACCELERATION 1600 // X, Y, Z and E acceleration for printing moves + #define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts + #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#endif + /** * Default Jerk limits (mm/s) * Override with M205 X Y Z E @@ -993,7 +1010,7 @@ //#define CLASSIC_JERK // I Know.. it's useless to put it here ;) -#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S) +#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) //#define CLASSIC_JERK #endif @@ -1003,7 +1020,7 @@ #if ENABLED(CLASSIC_JERK) -#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S) +#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.4 @@ -1025,7 +1042,7 @@ #endif #endif -#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S) +#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #define DEFAULT_EJERK 5.0 // May be used by Linear Advance #endif @@ -1041,7 +1058,7 @@ * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S) + #if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge #endif @@ -1324,42 +1341,84 @@ // @section machine -#if ENABLED(KNUTWURST_TMC) -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors -#define INVERT_Y_DIR true // set to false for stock drivers or TMC2208 with reversed connectors -#define INVERT_Z_DIR true // set to false for stock drivers or TMC2208 with reversed connectors +#if DISABLED(KNUTWURST_TMC) -// @section extruder + #if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_X) + // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. + #define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors + #define INVERT_Y_DIR false // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_Z_DIR false // set to false for stock drivers or TMC2208 with reversed connectors -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors -#define INVERT_E1_DIR true // set to false for stock drivers or TMC2208 with reversed connectors -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false + // @section extruder + + // For direct drive extruder v9 set to true, for geared extruder set to false. + #define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_E1_DIR false // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_E2_DIR false + #define INVERT_E3_DIR false + #define INVERT_E4_DIR false + #define INVERT_E5_DIR false + #define INVERT_E6_DIR false + #define INVERT_E7_DIR false + #endif + + #if ENABLED(KNUTWURST_MEGA_P) + // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. + #define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors + #define INVERT_Y_DIR true // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_Z_DIR false // set to false for stock drivers or TMC2208 with reversed connectors + + // @section extruder + + // For direct drive extruder v9 set to true, for geared extruder set to false. + #define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_E1_DIR false // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_E2_DIR false + #define INVERT_E3_DIR false + #define INVERT_E4_DIR false + #define INVERT_E5_DIR false + #define INVERT_E6_DIR false + #define INVERT_E7_DIR false + #endif #endif -#if DISABLED(KNUTWURST_TMC) -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors -#define INVERT_Y_DIR false // set to false for stock drivers or TMC2208 with reversed connectors -#define INVERT_Z_DIR false // set to false for stock drivers or TMC2208 with reversed connectors +#if ENABLED(KNUTWURST_TMC) + #if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_X) + // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. + #define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors + #define INVERT_Y_DIR true // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_Z_DIR true // set to false for stock drivers or TMC2208 with reversed connectors -// @section extruder + // @section extruder -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors -#define INVERT_E1_DIR false // set to false for stock drivers or TMC2208 with reversed connectors -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false + // For direct drive extruder v9 set to true, for geared extruder set to false. + #define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_E1_DIR true // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_E2_DIR false + #define INVERT_E3_DIR false + #define INVERT_E4_DIR false + #define INVERT_E5_DIR false + #define INVERT_E6_DIR false + #define INVERT_E7_DIR false + #endif + #if ENABLED(KNUTWURST_MEGA_P) + // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. + #define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors + #define INVERT_Y_DIR false // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_Z_DIR true // set to false for stock drivers or TMC2208 with reversed connectors + + // @section extruder + + // For direct drive extruder v9 set to true, for geared extruder set to false. + #define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_E1_DIR true // set to false for stock drivers or TMC2208 with reversed connectors + #define INVERT_E2_DIR false + #define INVERT_E3_DIR false + #define INVERT_E4_DIR false + #define INVERT_E5_DIR false + #define INVERT_E6_DIR false + #define INVERT_E7_DIR false + #endif #endif // @section homing @@ -1382,7 +1441,7 @@ // @section machine // The size of the print bed -#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S) +#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #define X_BED_SIZE 225 #define Y_BED_SIZE 220 #define Z_BED_HEIGHT 210 @@ -1674,7 +1733,7 @@ #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). #endif -#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S) +#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) // Homing speeds (mm/m) #define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_Z (5*60) diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h index 78018607..ac175659 100755 --- a/Marlin/src/inc/Version.h +++ b/Marlin/src/inc/Version.h @@ -41,7 +41,7 @@ * here we define this default string as the date where the latest release * version was tagged. */ - #define CUSTOM_BUILD_VERSION "1.1.5" + #define CUSTOM_BUILD_VERSION "1.1.6-beta" #ifndef STRING_DISTRIBUTION_DATE #define STRING_DISTRIBUTION_DATE "2020-08-27" diff --git a/README.md b/README.md index 47c7189a..10203603 100755 --- a/README.md +++ b/README.md @@ -1,4 +1,4 @@ -# Knutwurst's i3 MEGA (M/S/X) Firmware
(based on Marlin 2.0.x) +# Knutwurst's i3 MEGA (M/S/P/X) Firmware
(based on Marlin 2.0.x) (BITTE GENAU DURCHLESEN! / PLEASE READ CAREFULLY!) @@ -8,6 +8,7 @@ ### Wenn du Fragen hast, schaue gern in der offiziellen [Facebook-Gruppe](https://www.facebook.com/groups/3094090037303577/) vorbei. +###WARNUNG: Der Mega Pro / Mega P Support befindet sich noch in der Entwicklung. Aktuell wird der Laser noch nicht unterstützt, ebensowenig wie das Piezo-Leveling! # Inhaltsverzeichnis (Deutsch) - [Funktionen](#funktionen) @@ -20,6 +21,8 @@ - [Downloads](#downloads) +###WARNING: The Mega Pro / Mega P support is still under development. The laser is currently not supported, nor is piezo leveling! + # Table of Contets (english) - [Features](#features) - [What's better?](#whats-better-in-coparison-to-other-firmwares-bug-fixes) diff --git a/i3_mega_envs.ini b/i3_mega_envs.ini index 26b3a233..5e597c2b 100755 --- a/i3_mega_envs.ini +++ b/i3_mega_envs.ini @@ -1,12 +1,7 @@ -########################################################### -# # -# Manual Leveling Configurations # -# # -########################################################### - # # i3 Mega (normal Version) # + [env:i3_MEGA] platform = atmelavr board = megaatmega2560 @@ -15,9 +10,7 @@ lib_deps = ${common.lib_deps} TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH - - +build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH [env:i3_MEGA_TMC] platform = atmelavr @@ -27,7 +20,48 @@ lib_deps = ${common.lib_deps} TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH + +[env:i3_MEGA_BLTOUCH_10] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC + +[env:i3_MEGA_BLTOUCH_11] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC + +[env:i3_MEGA_TMC_BLTOUCH_10] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT + +[env:i3_MEGA_TMC_BLTOUCH_11] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT + # @@ -41,33 +75,7 @@ lib_deps = ${common.lib_deps} TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH - - - -[env:i3_MEGA_S_DGUS] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH - - - -[env:i3_MEGA_S_DGUS_TMC] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH - - +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH [env:i3_MEGA_S_TMC] platform = atmelavr @@ -77,7 +85,113 @@ lib_deps = ${common.lib_deps} TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH + +[env:i3_MEGA_S_BLTOUCH_10] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC + +[env:i3_MEGA_S_BLTOUCH_11] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC + +[env:i3_MEGA_S_TMC_BLTOUCH_10] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT + +[env:i3_MEGA_S_TMC_BLTOUCH_11] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT + + + +# +# i3 Mega S (new TFT) +# +[env:i3_MEGA_S_DGUS] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH + +[env:i3_MEGA_S_DGUS_TMC] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH + +[env:i3_MEGA_S_DGUS_BLTOUCH_10] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC + +[env:i3_MEGA_S_DGUS_BLTOUCH_11] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC + +[env:i3_MEGA_S_DGUS_TMC_BLTOUCH_10] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P + +[env:i3_MEGA_S_DGUS_TMC_BLTOUCH_11] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P + # @@ -91,9 +205,7 @@ lib_deps = ${common.lib_deps} TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT - - +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT [env:i3_MEGA_X_TMC] platform = atmelavr @@ -103,85 +215,7 @@ lib_deps = ${common.lib_deps} TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT - - - - - -########################################################### -# # -# BL Touch Configurations ( TRIGORILLA_14 ) # -# # -########################################################### -[env:i3_MEGA_BLTOUCH_10] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC - - -[env:i3_MEGA_TMC_BLTOUCH_10] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT - - -[env:i3_MEGA_S_BLTOUCH_10] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC - - - -[env:i3_MEGA_S_DGUS_BLTOUCH_10] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_TMC - - - -[env:i3_MEGA_S_DGUS_TMC_BLTOUCH_10] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X - - - -[env:i3_MEGA_S_TMC_BLTOUCH_10] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT - +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT [env:i3_MEGA_X_BLTOUCH_10] platform = atmelavr @@ -191,9 +225,17 @@ lib_deps = ${common.lib_deps} TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT - +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT +[env:i3_MEGA_X_BLTOUCH_11] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT [env:i3_MEGA_X_TMC_BLTOUCH_10] platform = atmelavr @@ -203,104 +245,7 @@ lib_deps = ${common.lib_deps} TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT - - -########################################################### -# # -# BL Touch Configurations ( TRIGORILLA_14_11 ) # -# # -########################################################### - -# -# i3 Mega (normal Version) -# -[env:i3_MEGA_BLTOUCH_11] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC - - -[env:i3_MEGA_TMC_BLTOUCH_11] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT - - -# -# i3 Mega S -# -[env:i3_MEGA_S_BLTOUCH_11] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC - - - -[env:i3_MEGA_S_DGUS_BLTOUCH_11] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_TMC - - - -[env:i3_MEGA_S_DGUS_TMC_BLTOUCH_11] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X - - - -[env:i3_MEGA_S_TMC_BLTOUCH_11] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT - - -# -# i3 Mega X -# -[env:i3_MEGA_X_BLTOUCH_11] -platform = atmelavr -board = megaatmega2560 -board_build.f_cpu = 16000000L -lib_deps = ${common.lib_deps} - TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip -src_filter = ${common.default_src_filter} + -build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT - - +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT [env:i3_MEGA_X_TMC_BLTOUCH_11] platform = atmelavr @@ -310,4 +255,69 @@ lib_deps = ${common.lib_deps} TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip src_filter = ${common.default_src_filter} + build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT \ No newline at end of file +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT + + + +# +# i3 Mega P +# +[env:i3_MEGA_P] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH + +[env:i3_MEGA_P_TMC] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH + +[env:i3_MEGA_P_BLTOUCH_10] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC + +[env:i3_MEGA_P_BLTOUCH_11] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC + +[env:i3_MEGA_P_TMC_BLTOUCH_10] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X + +[env:i3_MEGA_P_TMC_BLTOUCH_11] +platform = atmelavr +board = megaatmega2560 +board_build.f_cpu = 16000000L +lib_deps = ${common.lib_deps} + TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip +src_filter = ${common.default_src_filter} + +build_flags = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT +build_unflags = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X \ No newline at end of file diff --git a/platformio.ini b/platformio.ini index 6d7d2407..33ea8741 100755 --- a/platformio.ini +++ b/platformio.ini @@ -31,7 +31,37 @@ src_dir = Marlin boards_dir = buildroot/share/PlatformIO/boards #default_envs = mega2560 extra_configs = i3_mega_envs.ini -default_envs = i3_MEGA, i3_MEGA_TMC, i3_MEGA_S, i3_MEGA_S_DGUS, i3_MEGA_S_DGUS_TMC, i3_MEGA_S_TMC, i3_MEGA_X, i3_MEGA_X_TMC, i3_MEGA_BLTOUCH_10, i3_MEGA_TMC_BLTOUCH_10, i3_MEGA_S_BLTOUCH_10, i3_MEGA_S_DGUS_BLTOUCH_10, i3_MEGA_S_DGUS_TMC_BLTOUCH_10, i3_MEGA_S_TMC_BLTOUCH_10, i3_MEGA_X_BLTOUCH_10, i3_MEGA_X_TMC_BLTOUCH_10, i3_MEGA_BLTOUCH_11, i3_MEGA_TMC_BLTOUCH_11, i3_MEGA_S_BLTOUCH_11, i3_MEGA_S_DGUS_BLTOUCH_11, i3_MEGA_S_DGUS_TMC_BLTOUCH_11, i3_MEGA_S_TMC_BLTOUCH_11, i3_MEGA_X_BLTOUCH_11, i3_MEGA_X_TMC_BLTOUCH_11 +default_envs = + i3_MEGA + i3_MEGA_TMC + i3_MEGA_BLTOUCH_10 + i3_MEGA_BLTOUCH_11 + i3_MEGA_TMC_BLTOUCH_10 + i3_MEGA_TMC_BLTOUCH_11 + i3_MEGA_S + i3_MEGA_S_TMC + i3_MEGA_S_BLTOUCH_10 + i3_MEGA_S_BLTOUCH_11 + i3_MEGA_S_TMC_BLTOUCH_10 + i3_MEGA_S_TMC_BLTOUCH_11 + i3_MEGA_S_DGUS + i3_MEGA_S_DGUS_TMC + i3_MEGA_S_DGUS_BLTOUCH_10 + i3_MEGA_S_DGUS_BLTOUCH_11 + i3_MEGA_S_DGUS_TMC_BLTOUCH_10 + i3_MEGA_S_DGUS_TMC_BLTOUCH_11 + i3_MEGA_X + i3_MEGA_X_TMC + i3_MEGA_X_BLTOUCH_10 + i3_MEGA_X_BLTOUCH_11 + i3_MEGA_X_TMC_BLTOUCH_10 + i3_MEGA_X_TMC_BLTOUCH_11 + i3_MEGA_P + i3_MEGA_P_TMC + i3_MEGA_P_BLTOUCH_10 + i3_MEGA_P_BLTOUCH_11 + i3_MEGA_P_TMC_BLTOUCH_10 + i3_MEGA_P_TMC_BLTOUCH_11 # ******************************************************************************************* # ** **