diff --git a/Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki b/Start-and-Endcode-with-preheat-and-purge-line.mediawiki
similarity index 61%
rename from Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki
rename to Start-and-Endcode-with-preheat-and-purge-line.mediawiki
index 5647f48..e8262b6 100644
--- a/Cura-Start--and-Endcode-with-preheat-and-purge-line.mediawiki
+++ b/Start-and-Endcode-with-preheat-and-purge-line.mediawiki
@@ -1,6 +1,6 @@
 For more information about every single Line, please visit https://marlinfw.org/meta/gcode/
 
-*Startcode
+*Startcode (Cura)
 
  G21                                        ; metric values
  G90                                        ; absolute positioning
@@ -18,8 +18,26 @@ For more information about every single Line, please visit https://marlinfw.org/
  G1 E-2 F500                                ; Retract a little
  G1 Y120 F4000                              ; Quickly wipe away from the filament line
 
+* Startcode (PrusaSlicer)
 
-*Endcode
+ G21                                        ; metric values
+ G90                                        ; absolute positioning
+ M82                                        ; set extruder to absolute mode
+ M107                                       ; start with the fan off
+ M190 S[first_layer_bed_temperature]        ; preheat and wait for bed
+ M109 S[first_layer_temperature]            ; preheat and wait for hotend
+ M300 S1000 P500                            ; BEEP heating done
+ G28 X0 Y10 Z0                              ; move X/Y to min endstops
+ G0 Z0.15                                   ; lift nozzle a bit
+ G0 X2                                      ; go away from clips
+ G92 E0                                     ; zero the extruded length
+ G1 Y50 E25 F500                            ; Extrude 25mm of filament in a 5cm line.
+ G92 E0                                     ; zero the extruded length again
+ G1 E-2 F500                                ; Retract a little
+ G1 Y120 F4000                              ; Quickly wipe away from the filament line
+
+
+*Endcode (Cura/PrusaSlicer)
 
  M104 S0                                    ; Extruder off
  M140 S0                                    ; Heatbed off