From 3bbba6938811b1e6327df6fd6ba14a29adc8743d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Oliver=20K=C3=B6ster?=
 <36196269+knutwurst@users.noreply.github.com>
Date: Tue, 11 Aug 2020 18:11:58 +0200
Subject: [PATCH] Updated BLTouch Installation (english) (markdown)

---
 BLTouch-Installation-(english).md | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/BLTouch-Installation-(english).md b/BLTouch-Installation-(english).md
index 5575a63..7797b3c 100644
--- a/BLTouch-Installation-(english).md
+++ b/BLTouch-Installation-(english).md
@@ -100,11 +100,11 @@ If you now switch on the printer, the tip of the sensor would have to move in an
 
 The installation can be done as usual via Cura. If you're not sure which board you have, try the 1.0 (_10 mark) first from here: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S / # downloads
 
-### test 2
+### Test 2
 
 Start the BLTouch leveling via the special menu. After moving to Home, the nozzle lifts up and moves to the first point at X40 Y40 and should then extend the tip of the sensor. If that doesn't happen **IMMEDIATELY** switch off the printer and try the firmware with the **_11** mark. If it still doesn't work, the wiring is incorrect.
 
-## configuration
+## Configuration
 
 For the next steps we need the printer, a PC and Pronterface